DP MST provides the capability to send multiple video and audio streams
through a single port. This requires the API's between i915 and audio
drivers to distinguish between multiple audio capable displays that can be
connected to a port. Currently only the port identity is shared in the
APIs. This patch adds support for MST with an additional parameter
'int pipe'. The existing parameter 'port' does not change it's meaning.
pipe =
MST : display pipe that the stream originates from
Non-MST : -1
Affected APIs:
struct i915_audio_component_ops
- int (*sync_audio_rate)(struct device *, int port, int rate);
+ int (*sync_audio_rate)(struct device *, int port, int pipe,
+ int rate);
- int (*get_eld)(struct device *, int port, bool *enabled,
- unsigned char *buf, int max_bytes);
+ int (*get_eld)(struct device *, int port, int pipe,
+ bool *enabled, unsigned char *buf, int max_bytes);
struct i915_audio_component_audio_ops
- void (*pin_eld_notify)(void *audio_ptr, int port);
+ void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
This patch makes dummy changes in the audio drivers (thanks Libin) for
build to succeed. The audio side drivers will send the right 'pipe' values
for MST in patches that will follow.
v2:
Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
Included Asoc driver API compatibility changes from Jeeja.
Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
Added comment for av_enc_map[] definition. (Takashi)
v3:
Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville)
Renamed get_saved_encoder() to get_saved_enc() to reduce line length
v4:
Rebased.
Parameter check for pipe < -1 values in get_saved_enc() (Ville)
Switched to for_each_pipe() in get_saved_enc() (Ville)
Renamed 'pipe' to 'dev_id' in audio side code (Takashi)
v5:
Included a comment for the dev_id arg. (Libin)
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
The recent bug report suggests that BCLK setup for i915 HSW/BDW needs
to be updated at each HDMI hotplug, not only at initialization and
resume. That is, we need to update HSW_EM4 and HSW_EM5 registers at
ELD notification, too. Otherwise the HDMI audio may be out of sync
and played in a wrong pitch.
However, the HDA codec driver has no access to the controller
registers, and currently the code managing these registers is in
hda_intel.c, i.e. local to the controller driver. For allowing the
explicit BCLK update from the codec driver, as in this patch, the
former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and
exposed as snd_hdac_i915_set_bclk(). This is called from both the HDA
controller driver and intel_pin_eld_notify() in HDMI codec driver.
Along with this change, snd_hdac_get_display_clk() gets dropped as
it's no longer used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel IronLake and ValleyView platforms have different HDMI widget pin
and digital port mapping from other newer ones. The recent ones
(HSW+) have NID 0x05 to 0x07 for port B to port D, while these chips
have NID 0x04 to 0x06.
For adapting this mapping, pass the codec object instead of the bus
object to snd_hdac_sync_audio_rate() and snd_hdac_acomp_get_eld() so
that they can check the codec ID and calculate the mapping properly.
The changes in the HDMI codec driver side will follow in the later
patch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A couple of i915_audio_component ops have been added and accessed
directly from patch_hdmi.c. Ideally all these should be factored out
into hdac_i915.c.
This patch does it, adds two new helper functions for setting N/CTS
and fetching ELD bytes. One bonus is that the hackish widget vs port
mapping is also moved to hdac_i915.c, so that it can be fixed /
enhanced more cleanly.
Reviewed-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This lets the interested codec be notified when an i915 pin/ELD
event happens.
[tiwai: Fixed a trivial build error for CONFIG_SND_HDA_I915=n]
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The file is moved to hda core and renamed to hdac_i915.c, so can be used
by both legacy HDA driver and new Skylake audio driver.
- Add snd_hdac_ prefix to the public APIs.
- The i915 audio component is moved to core bus and dynamically allocated.
- A static pointer hdac_acomp is used to help bind/unbind callbacks to get
this component, because the sound card's private_data is used by the azx
chip pointer, which is a legacy structure. It could be removed if private
_data changes to some core structure which can be extended to find the
bus.
- snd_hdac_get_display_clk() is added to get the display core clock for
HSW/BDW.
- haswell_set_bclk() is moved to hda_intel.c because it needs to write the
controller registers EM4/EM5, and only legacy HD-A needs it for HSW/BDW.
- Move definition of HSW/BDW-specific registers EM4/EM5 to hda_register.h
and rename them to HSW_EM4/HSW_EM5, because other HD-A controllers have
different layout for the extended mode registers.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
