Commit Graph

431 Commits

Author SHA1 Message Date
Tony Lindgren
072167d13c Merge branch 'pwm-dmtimer-fixes' into omap-for-v5.0/fixes-v2 2019-01-29 07:53:47 -08:00
Tony Lindgren
9bd34c63f5 bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
Commit 84badc5ec5 ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") started producing a warning for pwm-omap-dmtimer:

WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x2f8/0x388
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
Data Access in Supervisor mode during Functional access
...
__pm_runtime_idle
omap_dm_timer_disable
pwm_omap_dmtimer_start
pwm_omap_dmtimer_enable
pwm_apply_state
pwm_vibrator_start
pwm_vibrator_play_work

This is because the timer that pwm-omap-dmtimer is using is now being
probed with ti-sysc interconnect target module instead of omap_device
and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
compatible with what omap_device has been doing.

We could fix this by reverting the timer changes and have the timer
probe again with omap_device. Or we could add more quirk handling to
ti-sysc driver. But as these options don't work nicely as longer term
solutions, let's just make timers probe with ti-sysc without any
quirks.

To do this, all we need to do is remove quirks for timers for ti-sysc,
and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.

We should not use pm_runtime_irq_safe() anyways for drivers as it will
take a permanent use count on the parent device blocking the parent
devices from idling and has been forcing ti-sysc driver to use a
quirk flag.

Note that we will move the timer data to DEBUG section later on in
clean-up patches.

Fixes: 84badc5ec5 ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-By: Andreas Kemnade <andreas@kemnade.info>
Tested-By: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-01-29 07:41:15 -08:00
Linus Torvalds
d36377c6eb ARM: SoC driver updates
Misc driver updates for platforms, many of them power related.
 
  - Rockchip adds power domain support for rk3066 and rk3188
  - Amlogic adds a power measurement driver
  - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
  - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
  - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
    stability of a handful of firmware/platform interfaces
  - PXA completes their conversion to dmaengine framework
  - Renesas does a bunch of PM cleanups across many platforms
  - Tegra adds support for suspend/resume on T186/T194, which includes
    some driver cleanups and addition of wake events
  - Tegra also adds a driver for memory controller (EMC) on Tegra2
  - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
  - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
 
  + misc cleanups across several platforms
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqd4APHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3HXoP/icWJTGrbf9R6T7r0RWB3xeV8ouTPMM8YM5C
 6wD4LkkjgZ16Hz/ellJ0Oug77LdnJ/ZI7jH2u0IcKRXr4sL94hEo11jAJLLtCHpt
 rGiItMuEDMhNFcAK/yREI6FtRqjNZhsTuR+gkcjzMnGLCaTA1+RwQNdugH0hh0fF
 z8C6tjN+fRIeS0wInBzR/402GcgRU0DIJrr0kmklS0u6tc2QW24ffv8ymvMiVO46
 l8VemmdxVZsBU2iehraPy6mSXsyTm04dNTuHnrIw3nE3kTJF7jMvpqI/euU1eZl6
 6EzrrCym8nC66IlqhHMBB427PK8sRqJTqwqSXO6e90AqiK4H2bMovXKiob/Psq+e
 yWqPOrAr8YBLqTgauvCzVm/xneT5rZM4N0BYhOk172Uk52qenNWDnqHj41A4CMSM
 /id3L1cHs5nf2qwuMncXvLX+Y2vO2n6cMmF8cDRLu592OBZRcVepUM0xoaSdZScv
 LJsP3jH3RRcY3L2rf7bY2Mitp48bDgZMZdw/viSHsFS+SVr225uNFALFDQ9kNEoZ
 2d9i9IvC7xOMhdVAX03U7DuRcpKXBPcv+arA57PiVvR4M1HeU7VvD4ayP5loVX2J
 GoDIKiPQitAsOKzyPyZ5Jw04lxio3xZbrbmmVzEH8uKWIV5omdiMnSrFsEfduRCT
 rU+Mqe2j
 =yEX2
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Misc driver updates for platforms, many of them power related.

   - Rockchip adds power domain support for rk3066 and rk3188

   - Amlogic adds a power measurement driver

   - Allwinner adds SRAM support for three platforms (F1C100, H5, A64
     C1)

   - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7

   - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
     stability of a handful of firmware/platform interfaces

   - PXA completes their conversion to dmaengine framework

   - Renesas does a bunch of PM cleanups across many platforms

   - Tegra adds support for suspend/resume on T186/T194, which includes
     some driver cleanups and addition of wake events

   - Tegra also adds a driver for memory controller (EMC) on Tegra2

   - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
     GPC

   - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60

  and misc cleanups across several platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: at91: add support in soc driver for new SAM9X60
  ARM: at91: add support in soc driver for LPDDR2 SiP
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags
  soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
  soc: imx: gpc: Increase GPC_CLK_MAX to 7
  soc: renesas: rcar-sysc: Fix power domain control after system resume
  soc: renesas: rcar-sysc: Merge PM Domain registration and linking
  soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
  soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
  dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
  dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
  dt-bindings: sram: Add Allwinner suniv F1C100s
  soc: sunxi: sram: Add support for the H5 SoC system control
  soc: sunxi: sram: Enable EMAC clock access for H3 variant
  soc: imx: gpcv2: add support for i.MX8MQ SoC
  soc: imx: gpcv2: move register access table to domain data
  soc: imx: gpcv2: prefix i.MX7 specific defines
  dmaengine: pxa: make the filter function internal
  ...
2018-12-31 17:32:35 -08:00
YueHaibing
2e79c18749 bus: qcom: remove duplicated include from qcom-ebi2.c
Remove duplicated include.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 10:40:17 +01:00
Olof Johansson
a6f119a069 Few more omap driver fixes and improvments for v4.21 merge window
This series of changes improves the TI module flag handling to allow
 booting with older dts files until the module flags have been moved
 to the interconnect target module level. And there's a of_node_name_eq()
 clean-up patch from Rob Herring for the GPMC driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlwRTwcRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXPnBBAAqJ4gEf94aqX1xHEK25nP1A26Hu/0lsox
 vhF/K4fgyyFjQ3UiXPD5GCMsly/1B4ZHNE2q/wPj2OLf29qYf61yN4rmE5uXLZIq
 /nNeqNkl6/bfDwUGk1CEhPpMD107LUWl/smI2R8IgE1c+BFn5jGeHIlhueca6kBo
 QeQ+4opEJC/snYaz0eKa4GxLkTiABeV2xifQTKZbwHgBWUTxJHUx/DPZOZa8ClMl
 0nZmtKahAn4qpeshnlg6XrTWHIROvk4nGii6vYyRIGsSHopcTTULGNd4uz7fWd2A
 zGcNNXC5Bd5CjA3yvTn1HAq9WfUuWka2PORaWJRRGvnDS1nHXgMafAHBqdFN5Rv6
 aoHoxldNIO5ROmDxuogdrr7KCu3GCUq2CU+GxgPldnEdrU0vnU4DDfXKzgbFmc+X
 zY0u4kRn5bqzXVQU0LcYJFZ0jl/1qHCczuomeMj4+r3MxV0JmL3UuvHUXAiIk/w8
 TIusND01up06iNrDvLwMAQd2iECIBTFQoLhPSbVgY87rTRGgDUthJcPacyYOYXi9
 z0T4gW2n+L+Tz/RHKNab2VAU12hHRcA37VXHJiYiJjjvdC6GWGYTk2sD8s6q9Ntm
 MnN8ioB7OcphOX0TsKi4qnWVXBZ7xSKYKCl9r5RnGQWQcf1BCSBYfw5b/6vrnHxR
 W9QpaiYzLBs=
 =xcO5
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.21/driver-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

Few more omap driver fixes and improvments for v4.21 merge window

This series of changes improves the TI module flag handling to allow
booting with older dts files until the module flags have been moved
to the interconnect target module level. And there's a of_node_name_eq()
clean-up patch from Rob Herring for the GPMC driver.

* tag 'omap-for-v4.21/driver-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-12 14:20:55 -08:00
Tony Lindgren
4014c08ba3 bus: ti-sysc: Check for no-reset and no-idle flags at the child level
With ti-sysc, we need to now have the device tree properties for
ti,no-reset-on-init and ti,no-idle-on-init at the module level instead
of the child device level.

Let's check for these properties at the child device level to enable
quirks, and warn about moving the properties to the module level.

Otherwise am335x-evm based boards tagging gpio1 with ti,no-reset-on-init
will have their DDR power disabled if wired up in such a tricky way.

Note that this should not be an issue for earlier kernels as we don't
rely on this until the dts files have been updated to probe with ti-sysc
interconnect target driver.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-12-10 14:11:26 -08:00
YueHaibing
754cac3f1c bus: fsl-mc: remove duplicated include files
Remove duplicated include.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06 15:53:20 +01:00
Olof Johansson
e5734bebed This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.21, please pull the following changes:
 
 - James fixes the firmware interface after a commit changed the use of
   VLA and broke large transfers
 
 - Stefan adds a timeout check for Raspberry Pi firmware transactions and
   updates a bunch of SoC/firmware files to use SPDX tags
 
 - Wolfram switches the GISB bus arbiter to use dev_get_drvdata()
 
 - Yangtao provides a fix for a reference leak due to a call to
   of_find_node_by_path()
 
 - Florian fixes the CPU re-entry point out of S3 suspend with kernels
   built in Thumb2 mode
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlwC0o4ACgkQh9CWnEQH
 BwSYfxAA0AmUWIJ65Tp+UyfmKXI4ufa7Rznf7x3pJs788Fulz1Q/158oifIBHZY9
 p6wc9MOFGk0uPc4HN4eVYXuUnQ1liJ6YfWPDj+rBvk9IVOZCKjRSbiELeSjEMeTy
 J/nC/N69rIkwkOaTNFne8SNdKba/DMgsYTLz+p0WOyktO50AAcrG4qL1avx/7QnM
 TjpUkQ1wKsLJZftJCUSSOcMCnSTuBpcAlRickacuFnoDi+S3QZ1Ub0rtDFP+fjb/
 AHfV7jIsVJUuiWcKFrLLWFrR3lGC0Z7AB/w/EE1a8SiDfDC/dgXzZTP6j40aWL4c
 aYOQZI4zmrqiajEIjTOk1lV/+yp8CD+qkQ3F5WHAUi/vRTI8UiCYGw6UgsfLyi5s
 TE4c35HWgQs4HOmcYuzYV+7TWQ0+cwodGqom0M8As28W+/G0kw7VkmyHJw0F28Bh
 2UlOETpUzKv+k+xwa17+FcT897uLGnE97N9g96BoO9EuTramBGTzKShRezC5M9Dj
 7/ie8v0IY6UWasSFncT39g8P//oz/Xo5KnlPNUPYBU0Vt9aAQUCJ+O75rgPXWcYn
 n1qmauBiCQBv4j8JkHLxpiZEYSSBulE7/DoWt+U7A5OJQmrchi9vW2QSWPWuax3c
 1DwOmo5S4M0mPveL+2v28kLfioL4qov1aEYtO/6xshGMzrCm4OQ=
 =yGiB
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.21/drivers' of https://github.com/Broadcom/stblinux into next/drivers

This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.21, please pull the following changes:

- James fixes the firmware interface after a commit changed the use of
  VLA and broke large transfers

- Stefan adds a timeout check for Raspberry Pi firmware transactions and
  updates a bunch of SoC/firmware files to use SPDX tags

- Wolfram switches the GISB bus arbiter to use dev_get_drvdata()

- Yangtao provides a fix for a reference leak due to a call to
  of_find_node_by_path()

- Florian fixes the CPU re-entry point out of S3 suspend with kernels
  built in Thumb2 mode

* tag 'arm-soc/for-4.21/drivers' of https://github.com/Broadcom/stblinux:
  soc: bcm: brcmstb: Don't leak device tree node reference
  firmware: raspberrypi: Switch to SPDX identifier
  firmware: raspberrypi: Fix firmware calls with large buffers
  soc: bcm: Switch raspberrypi-power to SPDX identifier
  firmware: raspberrypi: Define timeout for transactions
  bus: brcmstb_gisb: simplify getting .driver_data
  soc: bcm: brcmstb: Fix re-entry point with a THUMB2_KERNEL

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 13:06:27 -08:00
Tony Lindgren
f01067005e bus: ti-sysc: Detect devices for debug on omap5
We want to see the names of detected devices when DEBUG is enabled.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15 14:46:53 -08:00
Tony Lindgren
2c63a833e4 bus: ti-sysc: Add mcasp optional clocks flag
We have OPT_CLKS_NEEDED in legacy platform data, but it's missing
from the ti-sysc driver for device tree based configuration.

In order to pass OPT_CLKS_NEEDED quirk flag we need to update omap4 module
data and add a new compatible for dra7 as the module layout is different
from sysc_regbits_omap4_mcasp.

Fixes: 70a65240ef ("bus: ti-sysc: Add register bits for interconnect
target modules")
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15 14:46:53 -08:00
Tony Lindgren
7b4f8ac2f1 bus: ti-sysc: Fix getting optional clocks in clock_roles
We can have holes in clock_roles with interface clock missing for
example. Currently getting an optional clock will fail if there are
only a functional clock and an optional clock.

Fixes: 09dfe58107 ("bus: ti-sysc: Add handling for clkctrl opt clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15 14:46:52 -08:00
Wolfram Sang
0810d5cc29 bus: brcmstb_gisb: simplify getting .driver_data
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-11-05 12:37:22 -08:00
Linus Torvalds
b22b6beae6 ARM: SoC driver updates for 4.17
The most noteworthy SoC driver changes this time include:
 
 - The TEE subsystem gains an in-kernel interface to access the TEE
   from device drivers.
 
 - The reset controller subsystem gains a driver for the Qualcomm
   Snapdragon 845 Power Domain Controller.
 
 - The Xilinx Zynq platform now has a firmware interface for its
   platform management unit. This contains a firmware "ioctl" interface
   that was a little controversial at first, but the version we merged
   solved that by not exposing arbitrary firmware calls to user space.
 
 - The Amlogic Meson platform gains a "canvas" driver that is used
   for video processing and shared between different high-level drivers.
 
 The rest is more of the usual, mostly related to SoC specific power
 management support and core drivers in drivers/soc:
 
 - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
   features related to power and reset control.
 
 - The Mediatek mt8183 and mt6765 SoC platforms gain support for
   their respective power management chips.
 
 - A new driver for NXP i.MX8, which need a firmware interface for
   power management.
 
 - The SCPI firmware interface now contains support estimating power
   usage of performance states
 
 - The NVIDIA Tegra "pmc" driver gains a few new features, in particular
   a pinctrl interface for configuring the pads.
 
 - Lots of small changes for Qualcomm, in particular the "smem"
   device driver.
 
 - Some cleanups for the TI OMAP series related to their sysc
   controller.
 
 Additional cleanups and bugfixes in SoC specific drivers include the
 Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb1zEhAAoJEGCrR//JCVInnYQP/1pPXWsR/DV4COf4kGJFSAFn
 EfHXJM1vKtb7AWl6SClpHFlUMt+fvL+dzDNJ9aeRr2GjcuWfzKDcrBM1ZvM70I31
 C1Oc3b6OXEERCozDpRg/Vt8OpIvvWnVpaVffS9E5y6KqF8KZ0UbpWIxUJ87ik44D
 UvNXYOU/LUGPxR1UFm5rm2zWF4i+rBvqnpVaXbeOsXsLElzxXVfv2ymhhqIpo2ws
 o6e00DSjUImg8hLL4HCGFs2EX1KSD+oFzYaOHIE0/DEaiOnxVOpMSRhX2tZ+tRRb
 DekbjL+wz5gOAKJTQfQ2sNNkOuK8WFqmE5G0RJ0iYPXuNsB/17UNb2bhTJeqGdcD
 dqCQBLQuDUD2iHJ/d4RK5Kx3a8h2X63n5bdefgF5UX/2RBpXwFk1QtHr8X0DuY8c
 o/dPGFNBOn3egzMyXrD5VEtnaTwK1Y6/h09qfuOOF1ZuYDmELKRkWMV9l8dIsvd8
 ANjaw5B8MOUAf8DccBmPgUGu0XLCDyuFGqNVd9Kj5u3az+tyggIsgkEjWg1pxTv0
 7dDDyv4Ara1V1HVDZ23l3CgmYCZQx2R/vdpX/DjuDPGEHGjZ5s2TW8P6oegdxtIh
 LcTonNoTsRYzMrGD/aqhG/8fYsAScXePa3CLKl1Hrl+wFVV0XcaggH23GwD/k+7S
 eDBrEzLkOTxM+WXvsvKY
 =c/PQ
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The most noteworthy SoC driver changes this time include:

   - The TEE subsystem gains an in-kernel interface to access the TEE
     from device drivers.

   - The reset controller subsystem gains a driver for the Qualcomm
     Snapdragon 845 Power Domain Controller.

   - The Xilinx Zynq platform now has a firmware interface for its
     platform management unit. This contains a firmware "ioctl"
     interface that was a little controversial at first, but the version
     we merged solved that by not exposing arbitrary firmware calls to
     user space.

   - The Amlogic Meson platform gains a "canvas" driver that is used for
     video processing and shared between different high-level drivers.

  The rest is more of the usual, mostly related to SoC specific power
  management support and core drivers in drivers/soc:

   - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
     features related to power and reset control.

   - The Mediatek mt8183 and mt6765 SoC platforms gain support for their
     respective power management chips.

   - A new driver for NXP i.MX8, which need a firmware interface for
     power management.

   - The SCPI firmware interface now contains support estimating power
     usage of performance states

   - The NVIDIA Tegra "pmc" driver gains a few new features, in
     particular a pinctrl interface for configuring the pads.

   - Lots of small changes for Qualcomm, in particular the "smem" device
     driver.

   - Some cleanups for the TI OMAP series related to their sysc
     controller.

  Additional cleanups and bugfixes in SoC specific drivers include the
  Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
  firmware: tegra: bpmp: Implement suspend/resume support
  drivers: clk: Add ZynqMP clock driver
  dt-bindings: clock: Add bindings for ZynqMP clock driver
  firmware: xilinx: Add zynqmp IOCTL API for device control
  Documentation: xilinx: Add documentation for eemi APIs
  MAINTAINERS: imx: include drivers/firmware/imx path
  firmware: imx: add misc svc support
  firmware: imx: add SCU firmware driver support
  reset: Fix potential use-after-free in __of_reset_control_get()
  dt-bindings: arm: fsl: add scu binding doc
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  reset: qcom: PDC Global (Power Domain Controller) reset controller
  dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
  reset: Grammar s/more then once/more than once/
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  ...
2018-10-29 15:16:01 -07:00
Linus Torvalds
b27186abb3 Devicetree updates for 4.20:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
 
 - Work to get rid of direct accesses to struct device_node name and
   type pointers in preparation for removing them. New helpers for
   parsing DT cpu nodes and conversions to use the helpers. printk
   conversions to %pOFn for printing DT node names. Most went thru
   subystem trees, so this is the remainder.
 
 - Fixes to DT child node lookups to actually be restricted to child
   nodes instead of treewide.
 
 - Refactoring of dtb targets out of arch code. This makes the support
   more uniform and enables building all dtbs on c6x, microblaze, and
   powerpc.
 
 - Various DT binding updates for Renesas r8a7744 SoC
 
 - Vendor prefixes for Facebook, OLPC
 
 - Restructuring of some ARM binding docs moving some peripheral bindings
   out of board/SoC binding files
 
 - New "secure-chosen" binding for secure world settings on ARM
 
 - Dual licensing of 2 DT IRQ binding headers
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlvTKWYQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw8J5EACMAnrTxWQmXfQXOZEVxztcFavH6LP8mh2e
 7FZIZ38jzHXXvl81tAg1nBhzFUU/qtvqW8NDCZ9OBxKvp6PFDNhWu241ZodSB1Kw
 MZWy2A9QC+qbHYCC+SB5gOT0+Py3v7LNCBa5/TxhbFd35THJM8X0FP7gmcCGX593
 9Ml1rqawT4mK5XmCpczT0cXxyC4TgVtpfDWZH2KgJTR/kwXVQlOQOGZ8a1y/wrt7
 8TLIe7Qy4SFRzjhwbSta1PUehyYfe4uTSsXIJ84kMvNMxinLXQtvd7t9TfsK8p/R
 WjYUneJskVjtxVrMQfdV4MxyFL1YEt2mYcr0PMKIWxMCgGDAZsHPoUZmjyh/PrCI
 uiZtEHn3fXpUZAV/xEHHNirJxYyQfHGiksAT+lPrUXYYLCcZ3ZmqiTEYhGoQAfH5
 CQPMuxA6yXxp6bov6zJwZSTZtkXciju8aQRhUhlxIfHTqezmGYeql/bnWd+InNuR
 upANLZBh6D2jTWzDyobconkCCLlVkSqDoqOx725mMl6hIcdH9d2jVX7hwRf077VI
 5i3CyPSJOkSOLSdB8bAPYfBoaDtH2bthxieUrkkSbIjbwHO1H6a2lxPeG/zah0a3
 ePMGhi7J84UM4VpJEi000cP+bhPumJtJrG7zxP7ldXdfAF436sQ6KRptlcpLpj5i
 IwMhUQNH+g==
 =335v
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb targets out of arch code. This makes the support
     more uniform and enables building all dtbs on c6x, microblaze, and
     powerpc.

   - Various DT binding updates for Renesas r8a7744 SoC

   - Vendor prefixes for Facebook, OLPC

   - Restructuring of some ARM binding docs moving some peripheral
     bindings out of board/SoC binding files

   - New "secure-chosen" binding for secure world settings on ARM

   - Dual licensing of 2 DT IRQ binding headers"

* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  ARM: dt: relicense two DT binding IRQ headers
  power: supply: twl4030-charger: fix OF sibling-node lookup
  NFC: nfcmrvl_uart: fix OF child-node lookup
  net: stmmac: dwmac-sun8i: fix OF child-node lookup
  net: bcmgenet: fix OF child-node lookup
  drm/msm: fix OF child-node lookup
  drm/mediatek: fix OF sibling-node lookup
  of: Add missing exports of node name compare functions
  dt-bindings: Add OLPC vendor prefix
  dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
  dt-bindings: thermal: samsung: Add SPDX license identifier
  dt-bindings: clock: samsung: Add SPDX license identifiers
  dt-bindings: timer: ostm: Add R7S9210 support
  dt-bindings: phy: rcar-gen2: Add r8a7744 support
  dt-bindings: can: rcar_can: Add r8a7744 support
  dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
  dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  Documentation: dt: Add binding for /secure-chosen/stdout-path
  dt-bindings: arm: zte: Move sysctrl bindings to their own doc
  ...
2018-10-26 12:09:58 -07:00
Linus Torvalds
d1f2b1710d IOMMU Updates for Linux v4.20
These updates bring:
 
 	- Debugfs support for the Intel VT-d driver. When enabled, it
 	  now also exposes some of its internal data structures to
 	  user-space for debugging purposes.
 
 	- ARM-SMMU driver now uses the generic deferred flushing
 	  and fast-path iova allocation code. This is expected to be a
 	  major performance improvement, as this allocation path scales
 	  a lot better.
 
 	- Support for r8a7744 in the Renesas iommu driver
 
 	- Couple of minor fixes and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJb0vixAAoJECvwRC2XARrj0lkQALur432cGae8225gLNG+Ab1B
 lDGz/8uJeV4V552r58msq/yFpVascoMYOCgS+5N5J/jn5UiPnWxk//Uz2lvvCsFn
 3Z4HswSbmNLSuEHmN3/1CK28An44LjYxtnH/zAEaHRJgWNmC05lO4glPXaSIBwVS
 ve6ULymHJittCHFNNAstNBvMYirYV2y+FYxoq6EteTuCruNNXR78KQV7TqPYI+uZ
 0DwaXUyxO+HZbVeLpOnj/WHZ6+EUY0cHwHuk8U6ZCHnINZ+k9knt+WUvYu7wPCtj
 jGIyJXW5BG0rjJZnVUQs9BFXFSJLV2Ap8M3zKVIyFAUAyStEtGHct0YMRC29GX/J
 e45GPbElAZqx1NWRGGTV0xTsH5Gn85S2nP3p7iiPhj5zUhX/6SreZBDQdC+brtsB
 8HG85xohsUkVmRq/ez4hu0yqXtB66ppV7TcOjyixybG+ixRPtUwTbiaYUxbvkZTr
 hcYUVLGcpJX463VjUKGoRPFL/jZ6BXUWdLVllZPYgDT+IBXtQx1TB20DDtj5V2mR
 3m7B0xLQJDWdarhdA9Oj0FQj7ivmwmitcJ9EoNvHSRdEoE1iIy1vHv/7v/GokRVS
 J1YT5ZYAsGHBgZIsL7FpVA37i9t3JPVvgakUV/ZfLDyG3v+P0+eS3gNhECYt5luS
 D8G7Jy+2vsitO/ZCyu/r
 =q1HJ
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - Debugfs support for the Intel VT-d driver.

   When enabled, it now also exposes some of its internal data
   structures to user-space for debugging purposes.

 - ARM-SMMU driver now uses the generic deferred flushing and fast-path
   iova allocation code.

   This is expected to be a major performance improvement, as this
   allocation path scales a lot better.

 - Support for r8a7744 in the Renesas iommu driver

 - Couple of minor fixes and improvements all over the place

* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
  iommu/arm-smmu-v3: Remove unnecessary wrapper function
  iommu/arm-smmu-v3: Add SPDX header
  iommu/amd: Add default branch in amd_iommu_capable()
  dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
  iommu/amd: Move iommu_init_pci() to .init section
  iommu/arm-smmu: Support non-strict mode
  iommu/io-pgtable-arm-v7s: Add support for non-strict mode
  iommu/arm-smmu-v3: Add support for non-strict mode
  iommu/io-pgtable-arm: Add support for non-strict mode
  iommu: Add "iommu.strict" command line option
  iommu/dma: Add support for non-strict mode
  iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
  iommu/arm-smmu-v3: Implement flush_iotlb_all hook
  iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
  iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
  iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
  iommu/arm-smmu-v3: Fix a couple of minor comment typos
  iommu: Fix a typo
  iommu: Remove .domain_{get,set}_windows
  iommu: Tidy up window attributes
  ...
2018-10-26 10:50:10 -07:00
Linus Torvalds
62606c224d Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Remove VLA usage
   - Add cryptostat user-space interface
   - Add notifier for new crypto algorithms

  Algorithms:
   - Add OFB mode
   - Remove speck

  Drivers:
   - Remove x86/sha*-mb as they are buggy
   - Remove pcbc(aes) from x86/aesni
   - Improve performance of arm/ghash-ce by up to 85%
   - Implement CTS-CBC in arm64/aes-blk, faster by up to 50%
   - Remove PMULL based arm64/crc32 driver
   - Use PMULL in arm64/crct10dif
   - Add aes-ctr support in s5p-sss
   - Add caam/qi2 driver

  Others:
   - Pick better transform if one becomes available in crc-t10dif"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: chelsio - Update ntx queue received from cxgb4
  crypto: ccree - avoid implicit enum conversion
  crypto: caam - add SPDX license identifier to all files
  crypto: caam/qi - simplify CGR allocation, freeing
  crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
  crypto: arm64/aes-blk - ensure XTS mask is always loaded
  crypto: testmgr - fix sizeof() on COMP_BUF_SIZE
  crypto: chtls - remove set but not used variable 'csk'
  crypto: axis - fix platform_no_drv_owner.cocci warnings
  crypto: x86/aes-ni - fix build error following fpu template removal
  crypto: arm64/aes - fix handling sub-block CTS-CBC inputs
  crypto: caam/qi2 - avoid double export
  crypto: mxs-dcp - Fix AES issues
  crypto: mxs-dcp - Fix SHA null hashes and output length
  crypto: mxs-dcp - Implement sha import/export
  crypto: aegis/generic - fix for big endian systems
  crypto: morus/generic - fix for big endian systems
  crypto: lrw - fix rebase error after out of bounds fix
  crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.
  crypto: cavium/nitrox - NITROX command queue changes.
  ...
2018-10-25 16:43:35 -07:00
Linus Torvalds
114b5f8f7e This is the bulk of GPIO changes for the v4.20 series:
Core changes:
 
 - A patch series from Hans Verkuil to make it possible to
   enable/disable IRQs on a GPIO line at runtime and drive GPIO
   lines as output without having to put/get them from scratch.
   The irqchip callbacks have been improved so that they can
   use only the fastpatch callbacks to enable/disable irqs
   like any normal irqchip, especially the gpiod_lock_as_irq()
   has been improved to be callable in fastpath context.
   A bunch of rework had to be done to achieve this but it is
   a big win since I never liked to restrict this to slowpath.
   The only call requireing slowpath was try_module_get() and
   this is kept at the .request_resources() slowpath callback.
   In the GPIO CEC driver this is a big win sine a single
   line is used for both outgoing and incoming traffic, and
   this needs to use IRQs for incoming traffic while actively
   driving the line for outgoing traffic.
 
 - Janusz Krzysztofik improved the GPIO array API to pass a
   "cookie" (struct gpio_array) and a bitmap for setting or
   getting multiple GPIO lines at once. This improvement
   orginated in a specific need to speed up an OMAP1 driver and
   has led to a much better API and real performance gains
   when the state of the array can be used to bypass a lot
   of checks and code when we want things to go really fast.
   The previous code would minimize the number of calls
   down to the driver callbacks assuming the CPU speed was
   orders of magnitude faster than the I/O latency, but this
   assumption was wrong on several platforms: what we needed
   to do was to profile and improve the speed on the hot
   path of the array functions and this change is now
   completed.
 
 - Clean out the painful and hard to grasp BNF experiments
   from the device tree bindings. Future approaches are looking
   into using JSON schema for this purpose. (Rob Herring
   is floating a patch series.)
 
 New drivers:
 
 - The RCAR driver now supports r8a774a1 (RZ/G2M).
 
 - Synopsys GPIO via CREGs driver.
 
 Major improvements:
 
 - Modernization of the EP93xx driver to use irqdomain and
   other contemporary concepts.
 
 - The ingenic driver has been merged into the Ingenic pin
   control driver and removed from the GPIO subsystem.
 
 - Debounce support in the ftgpio010 driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbzdyOAAoJEEEQszewGV1zfYcP/0HBEAOPhHD/i5OQxfKs1msh
 mFT/t/IbTmRpCgbEv4CDx4Kc/InE0sUnQr1TL/1WvU6uObM6Ncxq5Z90MvyrgzYu
 BqQHq2k2tORvkVSNRxcfD/BAAoo1EerXts1kDhutvdKfepfS6DxpENwzvsFgkVlq
 2jj1cdZztjv8A+9cspHDpQP+jDvl1VSc10nR5fRu1TttSpUwzRJaB30NBNXJmMJc
 5KUr67lEbsQRPsBvFErU11bydPqhfT+pXmODcfIwS0EtATQ8WC5mkSb/Ooei0fvT
 oZ7uR3Os8tMf7isOKssEyFabKwhnfOEt6TBt9em0TfUtInOo0Dc7r8TfBcn57fyZ
 xg2R9DQEVRfac8bjhF/BI5KHuN9IMGDDvj6XApumQVliZbISRjMnh3jte6RpcV0A
 Ejqz8FeDY13qvEdOnW1EPpwmXdDVWiEAq0ebGLStKNls+/4gB2HmyxGUOzJf+og5
 hujsxcJzGQqjCe0moeY/1d7vsy0ZjbHoS+p5fy79U212y2O7onEzFU92AX89bxKC
 rx2eCNmiZxCUy1nqu8edO62VnH6QdnqG3o+a4DJfCSHPvFM/E/NX9zHemZubQQ4I
 rYXNy4bL4tEG9cqWMfBxWrpiDZw7H6l8kXwdZG8IMyRU9BcKu96amgZ+jBXwzoaB
 JZelAAUWB9APghJYFr7o
 =YosT
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.20 series:

  Core changes:

   - A patch series from Hans Verkuil to make it possible to
     enable/disable IRQs on a GPIO line at runtime and drive GPIO lines
     as output without having to put/get them from scratch.

     The irqchip callbacks have been improved so that they can use only
     the fastpatch callbacks to enable/disable irqs like any normal
     irqchip, especially the gpiod_lock_as_irq() has been improved to be
     callable in fastpath context.

     A bunch of rework had to be done to achieve this but it is a big
     win since I never liked to restrict this to slowpath. The only call
     requireing slowpath was try_module_get() and this is kept at the
     .request_resources() slowpath callback. In the GPIO CEC driver this
     is a big win sine a single line is used for both outgoing and
     incoming traffic, and this needs to use IRQs for incoming traffic
     while actively driving the line for outgoing traffic.

   - Janusz Krzysztofik improved the GPIO array API to pass a "cookie"
     (struct gpio_array) and a bitmap for setting or getting multiple
     GPIO lines at once.

     This improvement orginated in a specific need to speed up an OMAP1
     driver and has led to a much better API and real performance gains
     when the state of the array can be used to bypass a lot of checks
     and code when we want things to go really fast.

     The previous code would minimize the number of calls down to the
     driver callbacks assuming the CPU speed was orders of magnitude
     faster than the I/O latency, but this assumption was wrong on
     several platforms: what we needed to do was to profile and improve
     the speed on the hot path of the array functions and this change is
     now completed.

   - Clean out the painful and hard to grasp BNF experiments from the
     device tree bindings. Future approaches are looking into using JSON
     schema for this purpose. (Rob Herring is floating a patch series.)

  New drivers:

   - The RCAR driver now supports r8a774a1 (RZ/G2M).

   - Synopsys GPIO via CREGs driver.

  Major improvements:

   - Modernization of the EP93xx driver to use irqdomain and other
     contemporary concepts.

   - The ingenic driver has been merged into the Ingenic pin control
     driver and removed from the GPIO subsystem.

   - Debounce support in the ftgpio010 driver"

* tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits)
  gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip()
  gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip()
  gpio: Drop parent irq assignment during cascade setup
  mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap
  gpio: fix SNPS_CREG kconfig dependency warning
  gpiolib: Initialize gdev field before is used
  gpio: fix kernel-doc after devres.c file rename
  gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip
  gpio: syscon: Fix possible NULL ptr usage
  gpiolib: Show correct direction from the beginning
  pinctrl: msm: Use init_valid_mask exported function
  gpiolib: Add init_valid_mask exported function
  GPIO: add single-register GPIO via CREG driver
  dt-bindings: Document the Synopsys GPIO via CREG bindings
  gpio: mockup: use device properties instead of platform_data
  gpio: Slightly more helpful debugfs
  gpio: omap: Remove set but not used variable 'dev'
  gpio: omap: drop omap_gpio_list
  Accept partial 'gpio-line-names' property.
  gpio: omap: get rid of the conditional PM runtime calls
  ...
2018-10-23 08:45:05 +01:00
Arnd Bergmann
e51e8d5de9 TI sysc driver changes for v4.20 merge window
This series gets rid of the SYSC_QUIRK_RESOURCE_PROVIDER to make device
 detection happen mostly only if #define DEBUG is set. Few core devices still
 need to be detected to set legacy quirks.
 
 We also add support for booting am335x, am437x and dra7 SoCs with L4 devices
 defined in device tree instead of legacy platform data.
 
 And finally we simplify suspend with just SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
 and dropping the custom functions that were attempting to work around
 issues that really turned out to be child device driver related issues.
 
 Apologies for a late pull request, debugging the suspend issues took a while
 and I did not want to send these changes until that got sorted out.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlu1AGARHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXMSuBAAvHJ6gKO2bv8AONDj6r1TBSoSjB7BwunL
 lnkDVKAzj/cNtahfqDuNLwFH0ftaQ21sS34qhFvvR3UVPBR+6BDz/NtUByh33ylh
 jvm3ZJ6AjscuOr9JH78yWQ08Xpqrbf02G4H3yzvFJMjIS9jA4HpEDDg6WKvGJMe7
 aGFOFQP1DGrQbr+i6suCPY8wt2O/KOCV1euedJEql6Rt438d4uCygYxyV0aQJr6J
 kjM0T7Im8+3Y5RHkcCGP5sHAKVijBiduhzPgBTWYgpVGXc5Fo0aZMD7MdFwAZNlB
 2cwX3cEhpDtbB9lnf7/N9zPrpnUrzreN/b1Xq9Dp8nvWdhudBRQsuuMccMgtU+IR
 e6s2EbEXSx/H8aVd2YH0ZJF1hA92AVOoesUHZ7NlmyDW4WkbGijy3YdzSiRfohBD
 AJ2INcmgSE0jhKKaB77+oWt5ey3Me+UIkArCKaNT/4BtNzDk6UrwkmLU4nFjjx2g
 eSvtih97oSHX59L6kQb0SINHuKRNc5i05bq2lIKt6RDiDxwa5FD2UaqojApTFRL9
 KOCfOjRAc+22SY0PP4CUVoEUvD2xibrjKci3Uho5/vgeHTA9tE9c8Gw3OyNXj7Tg
 z7JTvwy49gV3qqAU6iEmFB5uvBXyKMe6nB7f2DyJ7IgRYcjwkoy15b5tcRBpT9SM
 N2iAVnfn23k=
 =f9xh
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

TI sysc driver changes for v4.20 merge window

This series gets rid of the SYSC_QUIRK_RESOURCE_PROVIDER to make device
detection happen mostly only if #define DEBUG is set. Few core devices still
need to be detected to set legacy quirks.

We also add support for booting am335x, am437x and dra7 SoCs with L4 devices
defined in device tree instead of legacy platform data.

And finally we simplify suspend with just SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
and dropping the custom functions that were attempting to work around
issues that really turned out to be child device driver related issues.

Apologies for a late pull request, debugging the suspend issues took a while
and I did not want to send these changes until that got sorted out.

* tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  bus: ti-sysc: Make some warnings debug only
  bus: ti-sysc: Detect devices for debug on dra7
  bus: ti-sysc: Detect timer and gpio on dra7
  bus: ti-sysc: Detect devices on am335x when DEBUG is enabled
  bus: ti-sysc: Detect more devices on am473x for debugging
  bus: ti-sysc: Update revision masks to support am437x
  bus: ti-sysc: Defer suspend as needed

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 17:21:44 +02:00
Tony Lindgren
f5e80203da bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
As Grygorii Strashko pointed out, the runtime PM use count of the
children can be whatever at suspend and we should not use it. So
let's just suspend ti-sysc at noirq level and get rid of some code.

Let's also remove the PM_SLEEP ifdef and use __maybe_unused as the
PM code already deals with the ifdefs.

Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-10-01 09:33:28 -07:00
Rob Herring
b1a2344536 bus: imx-weim: drop unnecessary DT node name NULL check
Checking the child node names is pointless as the DT node name can
never be NULL, so remove it.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-01 13:24:15 +08:00
Tony Lindgren
f949078302 bus: ti-sysc: Make some warnings debug only
We're currently warning about busy children on suspend in
sysc_child_suspend_noirq() but the legacy code omap_device does
not do that. Let's just make it dev_dbg() instead of dev_warn().

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28 15:27:33 -07:00
Tony Lindgren
c6eb4af39f bus: ti-sysc: Detect devices for debug on dra7
We want to see the names of detected devices when DEBUG is enabled.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28 15:27:31 -07:00
Tony Lindgren
3a3d802b02 bus: ti-sysc: Detect timer and gpio on dra7
We need to detect timer and gpio on dra7 because of the
SYSC_QUIRK_LEGACY_IDLE flag for suspend and resume.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28 15:27:28 -07:00
Tony Lindgren
472c54f019 Merge commit '4f3530f4a41d49c41015020cd9a5ed5c95b5d2db' into omap-for-v4.20/ti-sysc 2018-09-28 15:27:21 -07:00
Rob Herring
c655f7ea4d bus: mvebu-mbus: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28 16:41:57 -05:00
Rob Herring
6b825b17f4 bus: fsl-mc: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28 16:41:57 -05:00
Nipun Gupta
761ba8ed11 bus/fsl-mc: set coherent dma mask for devices on fsl-mc bus
of_dma_configure() API expects coherent_dma_mask to be correctly
set in the devices. This patch does the needful.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25 09:47:53 +02:00
Nipun Gupta
a259ed1618 bus/fsl-mc: support dma configure for devices on fsl-mc bus
This patch adds support of dma configuration for devices on fsl-mc
bus using 'dma_configure' callback for busses. Also, directly calling
arch_setup_dma_ops is removed from the fsl-mc bus.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25 09:47:53 +02:00
Tony Lindgren
23731eac98 bus: ti-sysc: Detect devices on am335x when DEBUG is enabled
When debug is enabled, we want to see what devices we're detecting
to make things a bit easier for us.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24 12:17:09 -07:00
Tony Lindgren
1ba3069314 bus: ti-sysc: Detect more devices on am473x for debugging
When debug is enabled, we want to see what devices we're detecting
to make things a bit easier for us. Many of these devices will also
be available on am335x and dra7, and some just need updating the
revision register mask.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24 12:17:05 -07:00
Tony Lindgren
b82beef518 bus: ti-sysc: Update revision masks to support am437x
We need to detect few new devices to tag for noirq_suspend and
pm_runtime_irq_safe to avoid causing regressions compared to
legacy platform data booting.

Let's update i2c, gpio, uart and wdt revision masks to detect
them on am437x. Note that we can remove the second wdt entry
with the updated mask. Note that we also have some uarts with
a different revision register.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24 12:16:59 -07:00
Tony Lindgren
40d9f91248 bus: ti-sysc: Defer suspend as needed
We don't care when we suspend but some our children do. In order to
avoid tagging various modules with SYSC_QUIRK_RESOURCE_PROVIDER, let's
do it automatically by tagging modules that are busy on suspend for
noirq suspend. This way we can just do module detection on define DEBUG.

Note that we still need to keep SYSC_QUIRK_LEGACY_IDLE flag around so
the our legacy single-child devices that set pm_runtime_irq_safe() can
manage the interconnect target module themselves.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24 12:16:54 -07:00
Horia Geantă
e9158b35ef bus: fsl-mc: add support for dpseci device type
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21 13:24:50 +08:00
Janusz Krzysztofik
77588c14ac gpiolib: Pass array info to get/set array functions
In order to make use of array info obtained from gpiod_get_array() and
speed up processing of arrays matching single GPIO chip layout, that
information must be passed to get/set array functions.  Extend the
functions' API with that additional parameter and update all users.
Pass NULL if a user builds an array itself from single GPIOs.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rojhalat Ibrahim <imr@rtschenk.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13 11:16:54 +02:00
Janusz Krzysztofik
b9762bebc6 gpiolib: Pass bitmaps, not integer arrays, to get/set array
Most users of get/set array functions iterate consecutive bits of data,
usually a single integer, while processing array of results obtained
from, or building an array of values to be passed to those functions.
Save time wasted on those iterations by changing the functions' API to
accept bitmaps.

All current users are updated as well.

More benefits from the change are expected as soon as planned support
for accepting/passing those bitmaps directly from/to respective GPIO
chip callbacks if applicable is implemented.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rojhalat Ibrahim <imr@rtschenk.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13 11:15:30 +02:00
Tony Lindgren
ea4d65f14f Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2 2018-08-28 09:58:03 -07:00
Linus Torvalds
f3ea496213 ARM: SoC driver updates
Some of the larger changes this merge window:
  - Removal of drivers for Exynos5440, a Samsung SoC that never saw
    widespread use.
  - Uniphier support for USB3 and SPI reset handling
  - Syste control and SRAM drivers and bindings for Allwinner platforms
  - Qualcomm AOSS (Always-on subsystem) reset controller drivers
  - Raspberry Pi hwmon driver for voltage
  - Mediatek pwrap (pmic) support for MT6797 SoC
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+MMkPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3pB4QAIj7iVxSKEQFz65iXLTfMJKFZ9TSvRgWSDyE
 CHF+WOQGTnxkvySEHSw/SNqDM+Bas8ijR8b4vWzsXJFB+3HA0ZTGLU379/af1zCE
 9k8QjyIWtRWKX9fo7qCHVXlMfxGbOdbCOsh4jnmHqEIDxCHXpIiJRfvUbKIXGpfn
 tw6QpM70vm6Q6AdKwzmDbMCYnQAMWxBK/G/Q7BfRG+IYWYjFGbiWIc9BV9Ki8+nE
 3235ISaTHvAHodoec8tpLxv34GsOP4RCqscGYEuCf22RYfWva4S9e4yoWT8qPoIl
 IHWNsE3YWjksqpt9rj9Pie/PycthO4E4BUPMtqjMbC2OyKFgVsAcHrmToSdd+7ob
 t3VNM6RVl8xyWSRlm5ioev15CCOeWRi1nUT7m3UEBWpQ6ihJVpbjf1vVxZRW/E0t
 cgC+XzjSg26sWx1bSH9lGPFytOblAcZ04GG/Kpz02MmTgMiTdODFZ67AsqtdeQS7
 a9wpaQ+DgTqU0VcQx8Kdq8uy9MOztkhXn5yO8fEWjpm0lPcxjhJS4EpN+Ru2T7/Z
 AMuy5lRJfQzAPU9kY7TE0yZ07pgpZgh7LlWOoKtGD7UklzXVVZrVlpn7bApRN5vg
 ZLze5OiEiIF5gIiRC8sIyQ9TZdvg4NqwebCqspINixqs7iIpB7TG93WQcy82osSE
 TXhtx4Sy
 =ZjwY
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Some of the larger changes this merge window:

   - Removal of drivers for Exynos5440, a Samsung SoC that never saw
     widespread use.

   - Uniphier support for USB3 and SPI reset handling

   - Syste control and SRAM drivers and bindings for Allwinner platforms

   - Qualcomm AOSS (Always-on subsystem) reset controller drivers

   - Raspberry Pi hwmon driver for voltage

   - Mediatek pwrap (pmic) support for MT6797 SoC"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
  drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  soc: fsl: cleanup Kconfig menu
  soc: fsl: dpio: Convert DPIO documentation to .rst
  staging: fsl-mc: Remove remaining files
  staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
  staging: fsl-dpaa2: eth: move generic FD defines to DPIO
  soc: fsl: qe: gpio: Add qe_gpio_set_multiple
  usb: host: exynos: Remove support for Exynos5440
  clk: samsung: Remove support for Exynos5440
  soc: sunxi: Add the A13, A23 and H3 system control compatibles
  reset: uniphier: add reset control support for SPI
  cpufreq: exynos: Remove support for Exynos5440
  ata: ahci-platform: Remove support for Exynos5440
  soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
  soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
  soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
  soc: mediatek: pwrap: fix cipher init setting error
  dt-bindings: pwrap: mediatek: add pwrap support for MT6797
  reset: uniphier: add USB3 core reset control
  dt-bindings: reset: uniphier: add USB3 core reset support
  ...
2018-08-23 13:52:46 -07:00
Tony Lindgren
4f3530f4a4 bus: ti-sysc: Fix no_console_suspend handling
If no_console_suspend is set, we should keep console enabled during suspend.
Lets fix this by only producing a warning if we can't idle hardware during
suspend.

Fixes: ef55f8215a ("bus: ti-sysc: Improve suspend and resume handling")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-22 08:04:49 -07:00
Linus Torvalds
84f5685230 VLA leftovers pull summary:
- bus/imx-weim: Use maximum register count to avoid VLA
 
 - drm/i2c/tda9950: Use maximum CEC message size to avoid VLA
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlt2C80WHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJvVBD/96GT3cgROKIL1nrgtotAJobefS
 PpojBo9qHqG+8YqBQxZwM5PJpHhHdGeK1EE8gzruJL1146ExXdePX+Mvf1NgGsad
 EnMVZ4eQfiL1yTj/Sutn4WZeLs88kqkcvsUVN+V7uStuDGeSDMh2QYCsFBFL5heV
 aW6/DvB+LT4vmAkZdu7cU29vUo6hRQYDWD5VmYajujjkVHCerVuHX38ly/VS7jK8
 JhPp256nAMJSqvqyxQuS98GvzSLV7ovZB/i0PN8efg1Sph5XLHCql5S1hUIaMhqC
 ruVjJWqkDB78VZ/SLZcYVNurOwvdD3JREmmm4GvrYk3mgf1Lr8d1HvbAeTsz1QLi
 GJGS290OVEyVCZHwS5RAaIlEo+idPGtBymv7EIcVGQ3TdkDsruAfchF1OWNK0AYG
 T+85IDjYaUHWU7NkK98BdGTQNY7J95KDnMPgoN45ArIgBIrNAZ5pPlw3e3W0BL7Z
 rB4DwCEwrcq2C9uoJgQG0Oc8hmLsIINSicAZ1Y15DHkPGDHvdSNDQ6ya1q6IkcUS
 zfvxrh377Zo2l3cuJNkXnnT1sxO9Q86XjmqLbhGiifIzTHwIRcVUYWb4Hk6AfGks
 +5HhPli/02yaaRQcfa+8CI3MfiGmFjarwNx/AUDKvshfsHUcOqBxdop1ur8P4bpj
 E1frvFoUipoI2wUBTQ==
 =hM/H
 -----END PGP SIGNATURE-----

Merge tag 'vla-leftovers-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull VLA removal leftovers from Kees Cook:

 - bus/imx-weim: Use maximum register count to avoid VLA

 - drm/i2c/tda9950: Use maximum CEC message size to avoid VLA

* tag 'vla-leftovers-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  bus: imx-weim: Remove VLA usage
  drm/i2c: tda9950: Remove VLA usage
2018-08-17 10:40:09 -07:00
Tony Lindgren
0ef8e3bb97 bus: ti-sysc: Fix module register ioremap for larger offsets
We can have the interconnect target module control registers pretty
much anywhere within the module range. The current code attempts an
incomplete optimization of the ioremap size but does it wrong and
it only works for registers at the beginning of the module.

Let's just use the largest control register to calculate the ioremap
size. The ioremapped range is for most part cached anyways so there
is no need for size optimization. Let's also update the comments
accordingly.

Fixes: 0eecc636e5 ("bus: ti-sysc: Add minimal TI sysc interconnect
target driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-17 07:22:56 -07:00
Kees Cook
d8dfa59f5a bus: imx-weim: Remove VLA usage
In the quest to remove all stack VLA usage from the kernel[1], this
switches to using a maximum size and adds a sanity check.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
2018-08-13 13:40:52 -07:00
Olof Johansson
92f06c384b Allwinner drivers changes for 4.19
There's been work for this release cycles in both the SRAM controller
 driver in order to support more SoCs, as part of our VPU work, but also to
 enable the EMAC on the A64 (that needs to poke at registers within the same
 register space).
 
 Some work has been needed too to represent the bus to the display engine
 controllers that all need an SRAM to be mapped to the CPU to be able to
 access those controllers' registers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAltXJkEACgkQ0rTAlCFN
 r3R00g/8CkjHrlXejLLTxjMGdVQYnmgVL3wPBbXaqi6wtg/ATLpXN5b5m+CbRZEJ
 cMyY4LVYMbmQ1aLwAUNlDzNbv5vxR5tYJ9X3x63wf1AlFPEwwOO0sy17yZp2J8Rx
 FFHx/dciQPbXkbOyIF+P+b49rO7gQ1dsbl5UyEA6nfeVmbPyeamwUdYy2559fkb1
 3yWyTTUbXoEsDrKjuRf+tVdDr2ssTDqmT3qFTgl2jHZ5Bbyzq2aBH0NLBlk3G1te
 v4ceHRue/guEkjYnVEtIezhJMUwaDZcL5zuuRDINbT609mAMkO9he1Dz5BcvYe00
 Rt5h304Nt6JSOM5iEDYnh1mzvdflm3ZR12/TTyxtmGVNB9PxVEj8z/0lT4rLOC7I
 H5uNxbM5eM6GQKQou+W8OXRPyuKJ8PXWWk58ajf0knMuIBcYOU0tdrFrWcPxaFXK
 VScPibv7NEs7np3mKc32L0WmsgHrfMK9mmgvFZFfhAgYM6oHM356bo+Jawrn3aJY
 aL/MQ3+rxjQBwUeNbZDnt4ROoM0hYUYt2s5dNiYY8sfhy37fwZz1Vrg810MLQLTA
 q/5VB7dEHGVQNZaYToo7RVegre3bMsYzG0DdZCKyZKaknJjH4hC67yOd5vD8wpMH
 WMCHx+s/3A0S/BRNjstV2UNFZfsJN8BHUDC/aYda1TJc9cbvSAo=
 =NuX/
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers

Allwinner drivers changes for 4.19

There's been work for this release cycles in both the SRAM controller
driver in order to support more SoCs, as part of our VPU work, but also to
enable the EMAC on the A64 (that needs to poke at registers within the same
register space).

Some work has been needed too to represent the bus to the display engine
controllers that all need an SRAM to be mapped to the CPU to be able to
access those controllers' registers.

* tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  soc: sunxi: Add the A13, A23 and H3 system control compatibles
  drivers: soc: sunxi: Add support for the C1 SRAM region
  dt-bindings: sram: sunxi: Populate valid sections compatibles
  dt-bindings: sram: sunxi: Add A13, A20, A23 and H3 dedicated bindings
  soc: sunxi: sram: Add dt match for the A10 system-control compatible
  dt-bindings: sram: sunxi: Introduce new A10 binding for system-control
  bus: add bus driver for accessing Allwinner A64 DE2
  dt-bindings: add binding for the Allwinner A64 DE2 bus
  soc: sunxi: sram: Add updated compatible string for A64 system control
  dt-bindings: sram: Rename A64 SRAM controller compatible
  soc: sunxi: export a regmap for EMAC clock reg on A64

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26 00:09:43 -07:00
Faiz Abbas
596e795569 bus: ti-sysc: Add support for software reset
Add support for the software reset of a target interconnect
module using its sysconfig and sysstatus registers.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
[tony@atomide.com: updated to check if sysconfig exists]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-09 22:31:38 -07:00
Faiz Abbas
7f35e63dbf bus: ti-sysc: Add support for using ti-sysc for MCAN on dra76x
The dra76x MCAN generic interconnect module has a its own
format for the bits in the control registers.

Therefore add a new module type, new regbits and new capabilities
specific to the MCAN module.

Acked-by: Rob Herring <robh@kernel.org>
CC: Tony Lindgren <tony@atomide.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-09 22:31:27 -07:00
Kees Cook
207490517c bus: ti-sysc: Use 2-factor allocator arguments
This adjusts the allocator calls to use 2-factor argument call style, as
done treewide already for improved defense against allocation overflows.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 04:24:44 -07:00
Icenowy Zheng
8818e865aa
bus: add bus driver for accessing Allwinner A64 DE2
The "Display Engine 2.0" (usually called DE2) on the Allwinner A64 SoC
is different from the ones on other Allwinner SoCs. It requires a SRAM
region to be claimed, otherwise all DE2 subblocks won't be accessible.

Add a bus driver for the Allwinner A64 DE2 part which claims the SRAM
region when probing.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-28 10:20:19 +02:00
Linus Torvalds
b08fc5277a - Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
 - Explicitly reported overflow fixes (Silvio, Kees)
 - Add missing kvcalloc() function (Kees)
 - Treewide conversions of allocators to use either 2-factor argument
   variant when available, or array_size() and array3_size() as needed (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsgVtMWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhsJEACLYe2EbwLFJz7emOT1KUGK5R1b
 oVxJog0893WyMqgk9XBlA2lvTBRBYzR3tzsadfYo87L3VOBzazUv0YZaweJb65sF
 bAvxW3nY06brhKKwTRed1PrMa1iG9R63WISnNAuZAq7+79mN6YgW4G6YSAEF9lW7
 oPJoPw93YxcI8JcG+dA8BC9w7pJFKooZH4gvLUSUNl5XKr8Ru5YnWcV8F+8M4vZI
 EJtXFmdlmxAledUPxTSCIojO8m/tNOjYTreBJt9K1DXKY6UcgAdhk75TRLEsp38P
 fPvMigYQpBDnYz2pi9ourTgvZLkffK1OBZ46PPt8BgUZVf70D6CBg10vK47KO6N2
 zreloxkMTrz5XohyjfNjYFRkyyuwV2sSVrRJqF4dpyJ4NJQRjvyywxIP4Myifwlb
 ONipCM1EjvQjaEUbdcqKgvlooMdhcyxfshqJWjHzXB6BL22uPzq5jHXXugz8/ol8
 tOSM2FuJ2sBLQso+szhisxtMd11PihzIZK9BfxEG3du+/hlI+2XgN7hnmlXuA2k3
 BUW6BSDhab41HNd6pp50bDJnL0uKPWyFC6hqSNZw+GOIb46jfFcQqnCB3VZGCwj3
 LH53Be1XlUrttc/NrtkvVhm4bdxtfsp4F7nsPFNDuHvYNkalAVoC3An0BzOibtkh
 AtfvEeaPHaOyD8/h2Q==
 =zUUp
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull more overflow updates from Kees Cook:
 "The rest of the overflow changes for v4.18-rc1.

  This includes the explicit overflow fixes from Silvio, further
  struct_size() conversions from Matthew, and a bug fix from Dan.

  But the bulk of it is the treewide conversions to use either the
  2-factor argument allocators (e.g. kmalloc(a * b, ...) into
  kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
  b) into vmalloc(array_size(a, b)).

  Coccinelle was fighting me on several fronts, so I've done a bunch of
  manual whitespace updates in the patches as well.

  Summary:

   - Error path bug fix for overflow tests (Dan)

   - Additional struct_size() conversions (Matthew, Kees)

   - Explicitly reported overflow fixes (Silvio, Kees)

   - Add missing kvcalloc() function (Kees)

   - Treewide conversions of allocators to use either 2-factor argument
     variant when available, or array_size() and array3_size() as needed
     (Kees)"

* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
  treewide: Use array_size in f2fs_kvzalloc()
  treewide: Use array_size() in f2fs_kzalloc()
  treewide: Use array_size() in f2fs_kmalloc()
  treewide: Use array_size() in sock_kmalloc()
  treewide: Use array_size() in kvzalloc_node()
  treewide: Use array_size() in vzalloc_node()
  treewide: Use array_size() in vzalloc()
  treewide: Use array_size() in vmalloc()
  treewide: devm_kzalloc() -> devm_kcalloc()
  treewide: devm_kmalloc() -> devm_kmalloc_array()
  treewide: kvzalloc() -> kvcalloc()
  treewide: kvmalloc() -> kvmalloc_array()
  treewide: kzalloc_node() -> kcalloc_node()
  treewide: kzalloc() -> kcalloc()
  treewide: kmalloc() -> kmalloc_array()
  mm: Introduce kvcalloc()
  video: uvesafb: Fix integer overflow in allocation
  UBIFS: Fix potential integer overflow in allocation
  leds: Use struct_size() in allocation
  Convert intel uncore to struct_size
  ...
2018-06-12 18:28:00 -07:00
Kees Cook
a86854d0c5 treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:

        devm_kzalloc(handle, a * b, gfp)

with:
        devm_kcalloc(handle, a * b, gfp)

as well as handling cases of:

        devm_kzalloc(handle, a * b * c, gfp)

with:

        devm_kzalloc(handle, array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        devm_kcalloc(handle, array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        devm_kzalloc(handle, 4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@

(
  devm_kzalloc(HANDLE,
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  devm_kzalloc(HANDLE,
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@

- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@

(
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
  devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * E2
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Linus Torvalds
32bcbf8b6d ARM: SoC driver updates
This branch contains platform-related driver updates for ARM and ARM64.
 
 Highlights:
  - ARM SCMI (System Control & Management Interface) driver cleanups
  - Hisilicon support for LPC bus w/ ACPI
  - Reset driver updates for several platforms: Uniphier,
  - Rockchip power domain bindings and hardware descriptions for several SoCs.
  - Tegra memory controller reset improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfB94PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3k2IP/i9T71QoanZ3k6o/d+YUqmTuUiA+EJWFANry
 8KSjBKmYDON/GLgRCiNZR8P0NZ3d1LgFk5gZDdhMrOtoGtd8k8q0KyqLxjKAWHt6
 opSrGucmE1gy9FvJdUkK+y148vM+Ea4SXRVOZxbLV5qm3inPwnopJjgKAfnhIn4X
 QmkSca90CyEc3kPdBdfMeAKL+7SRb4mbFHAXXVE7QiWvjrEjUkvtNVTazf5Nroc4
 PbI97zSFrmSFO4ZK0jZHCd4R2xhsJwzDQ/UKHC9C9/IdFMLfnJ7dxIf97QYn41Kl
 H46FneMZZZ1FibN+Mj5hC/tByE8FrMtWh636z031s6kkamSqLiBAZFlGpHABxQJs
 3tN1vBP40R7hzm76yQAC4Uopr5xOtmLr6KBMBBRr+Axf9jHMS4m/WP1chwZFpFjI
 Awxc0VCjBUm+haHvK85J4eHrzbWPjG+8aV5Ar5DHVo8et3MzCdX0ycoDeUT787qc
 qzEcCjGPbXHBR1aXUX8stRW5x8zoGH/4IUYMo5IGadiFuXSna6ERG9IHq3fAU5Fp
 ZzNNKedtodn9NoMr3NJJk1ndyrUr0lpXwlVqFeksRTa+INk2FHKd0cQfxwV33kS9
 wHXw+v323uxa3Tz2TXKS7PavY5yr6fZ0dLC2+xEDqHq6bsLxo1DnBEnaola+Jg+u
 9hKEuSff
 =xs+f
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "This contains platform-related driver updates for ARM and ARM64.

  Highlights:

   - ARM SCMI (System Control & Management Interface) driver cleanups

   - Hisilicon support for LPC bus w/ ACPI

   - Reset driver updates for several platforms: Uniphier,

   - Rockchip power domain bindings and hardware descriptions for
     several SoCs.

   - Tegra memory controller reset improvements"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits)
  ARM: tegra: fix compile-testing PCI host driver
  soc: rockchip: power-domain: add power domain support for px30
  dt-bindings: power: add binding for px30 power domains
  dt-bindings: power: add PX30 SoCs header for power-domain
  soc: rockchip: power-domain: add power domain support for rk3228
  dt-bindings: power: add binding for rk3228 power domains
  dt-bindings: power: add RK3228 SoCs header for power-domain
  soc: rockchip: power-domain: add power domain support for rk3128
  dt-bindings: power: add binding for rk3128 power domains
  dt-bindings: power: add RK3128 SoCs header for power-domain
  soc: rockchip: power-domain: add power domain support for rk3036
  dt-bindings: power: add binding for rk3036 power domains
  dt-bindings: power: add RK3036 SoCs header for power-domain
  dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
  memory: tegra: Remove Tegra114 SATA and AFI reset definitions
  memory: tegra: Register SMMU after MC driver became ready
  soc: mediatek: remove unneeded semicolon
  soc: mediatek: add a fixed wait for SRAM stable
  soc: mediatek: introduce a CAPS flag for scp_domain_data
  soc: mediatek: reuse regmap_read_poll_timeout helpers
  ...
2018-06-11 18:15:22 -07:00
Linus Torvalds
7c00e8ae04 ARM: SoC platform updates
Here are the main updates for SoC support (besides DT additions) for ARM
 32- and 64-bit platforms. The branch also contains defconfig updates to
 turn on drivers and options as needed on the various platforms.
 
 The largest parts of the delta are from cleanups moving platform data
 and board file setup of TI platforms to ti-sysc bus drivers. There are
 also some sweeping changes of eeprom and nand setup on Davinci, i.MX
 and other platforms.
 
 Samsung is removing support for Exynos5440, which was an oddball SoC
 that hasn't been seen much use in designs.
 
 Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
 
 Linus Walleij is also removing support for ux500 (Sony Ericsson)
 U8540/9540 SoCs that never made it to significant mass production and
 products.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfCGIPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3Ks8P/3j87Za+6OTCzo+lW2byUy1CI4muGwxNSIxX
 65A1Wt2qvRDxjCX4MI5Cx8P1YdYJv+5ZF2p4vdlgQXoz3/XDbG+lxJ+/lyWl/+MK
 9kGsQWwEVicbGkaJCYR4ZKvfAwZ9jf7+cndY0Vgii44xQLsQZHEIfIO+mdlK43GZ
 xqaSckLQQzsDqjMUIckiyVy97RsDk1eLK+H2I+l7qs9v0z5UnhoD2CTxX5LzT8eH
 NlFmfUPN7Znshmt0aMznZyBRr2oM5Dsg49SfG0WhbOzyiZjSpw8MQ0N+RzyROhhB
 h5PjyuZN9fx2dO8Jjkqt3B8KmGFNDarGOmrasIJeCJDFRa9NStqFn0y4qJXS2wU7
 4La3GoBYRV8x0gq339pQ+70qKuD06e62GL7kV656yi+93CitWxy6IjrIACjSX6zH
 PD1hQpewfXAcHAHdBqNevRcz/sjG+36GJSCgI4umSP48NMlCuZafFAT4U/PVlt4E
 6VRQDeoi5ZFYIuPL1+bZvHax4fFxJGnaf02uQ/OPYP1o48AueSSvdo6bUPFbhwOD
 u0/uo3r+HxtQsw9I3tP3kj3/775BJclkO6zbG/dGZ8obuzuDwhuFtr3rzCrP/IzN
 n3rcBuFNZE6SQeKU+Tvmnh8ZLhJc5L8EYvqmihZj+BSfprBc8POFR2la4MRnHSn+
 tPEC/n9E
 =S5wc
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Here are the main updates for SoC support (besides DT additions) for
  ARM 32- and 64-bit platforms. The branch also contains defconfig
  updates to turn on drivers and options as needed on the various
  platforms.

  The largest parts of the delta are from cleanups moving platform data
  and board file setup of TI platforms to ti-sysc bus drivers. There are
  also some sweeping changes of eeprom and nand setup on Davinci, i.MX
  and other platforms.

  Samsung is removing support for Exynos5440, which was an oddball SoC
  that hasn't been seen much use in designs.

  Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).

  Linus Walleij is also removing support for ux500 (Sony Ericsson)
  U8540/9540 SoCs that never made it to significant mass production and
  products"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  MAINTAINERS: add NXP linux team maillist as i.MX reviewer
  ARM: stm32: Don't select DMA unconditionally on STM32MP157C
  arm64: defconfig: Enable PCIe on msm8996 and db820c
  ARM: pxa3xx: enable external wakeup pins
  ARM: pxa: stargate2: use device properties for at24 eeprom
  arm64: defconfig: Enable HISILICON_LPC
  arm64: defconfig: enable drivers for Poplar support
  arm64: defconfig: Enable UFS on msm8996
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
  bus: ti-sysc: Fix optional clocks array access
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ...
2018-06-11 17:49:09 -07:00