Commit Graph

512 Commits

Author SHA1 Message Date
Linus Torvalds
920f2ecdf6 sound updates for 4.13-rc1
This development cycle resulted in a fair amount of changes in both
 core and driver sides.  The most significant change in ALSA core is
 about PCM.  Also the support of of-graph card and the new DAPM widget
 for DSP are noteworthy changes in ASoC core.  And there're lots of
 small changes splat over the tree, as you can see in diffstat.
 
 Below are a few highlights:
 
 ALSA core:
 - Removal of set_fs() hackery from PCM core stuff, and the code
   reorganization / optimization thereafter
 - Improved support of PCM ack ops, and a new ABI for improved
   control/status mmap handling
 - Lots of constifications in various codes
 
 ASoC core:
 - The support of of-graph card, which may work as a better generic
   device for a replacement of simple-card
 - New widget types intended mainly for use with DSPs
 
 ASoC drivers:
 - New drivers for Allwinner V3s SoCs
 - Ensonic ES8316 codec support
 - More Intel SKL and KBL works
 - More device support for Intel SST Atom (mostly for cheap tablets and
   2-in-1 devices)
 - Support for Rockchip PDM controllers
 - Support for STM32 I2S and S/PDIF controllers
 - Support for ZTE AUD96P22 codecs
 
 HD-audio:
 - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
   for HP and Dell machines
 - A few more fixes for i915 component binding
 
 Note that of-graph change may bring the conflicts with a later pull
 request of devicetree, as currently found in linux-next.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAllbtmMOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaTMkhAAnqvRvh9nYBI1E2VGtJON/AFcsF4s6xdJd0ow
 Bn5Kq/07rGWxAi8Cy69LM930eQrZl+xR69I7LMkC54BxVNhvhXNef7E5GXPbRi+3
 l6dkBmkqvwmmHP5iiOxKtYSAnUfJitu1rmtAOVAjRh8rsWNeLuI8N8V/uilQBioi
 lRywdBjdylub00H1DL8cmZHbrBb4pYrL/LepTswZL3I/UZ225fMiIGFd8tXpQPwZ
 IKRZiuzrc3SykxSsL/aNeyxP+2qTYRtPfl/FGenKBBO2PJmGAb00yAdtQJRcD2eX
 Xf1alfvpNgpy/U6+C7dJgNWQvvr+lPCaFXuMukIDno/zg/xD1V1Ev/fnbVEINLve
 xMOnuJSGGaY6fu6eZ4Cck0VfZIj7UVA9x8zvBOKntIhq/VLfE7DDu3p9tiAZAVfH
 nMOLAhy+0kFyHSrv6zVWQj+cmjPwLvaW7fNWVljL5/MWuF5GJi05DUOfV/vk8BaO
 EnyVqe2ynzNLTsFpLHHy6XKgKtSTkPygxYSNuI7kSYAxD5qE6hXXKXTAqJ3LjDkO
 tGiFmxp/vHrlNvcyRjXc30th/9PPj/mRBcJ2KyjXPa63L5ZW86PiyIHKxJA4yogv
 y4z2ZlhIz90cZvpigFHtFqq1puVlDtKDbAaJ6AKrP8HEHUlMiPNApsSjWWBUcfzV
 DXzrlg0=
 =PUEh
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This development cycle resulted in a fair amount of changes in both
  core and driver sides. The most significant change in ALSA core is
  about PCM. Also the support of of-graph card and the new DAPM widget
  for DSP are noteworthy changes in ASoC core. And there're lots of
  small changes splat over the tree, as you can see in diffstat.

  Below are a few highlights:

  ALSA core:
   - Removal of set_fs() hackery from PCM core stuff, and the code
     reorganization / optimization thereafter
   - Improved support of PCM ack ops, and a new ABI for improved
     control/status mmap handling
   - Lots of constifications in various codes

  ASoC core:
   - The support of of-graph card, which may work as a better generic
     device for a replacement of simple-card
   - New widget types intended mainly for use with DSPs

  ASoC drivers:
   - New drivers for Allwinner V3s SoCs
   - Ensonic ES8316 codec support
   - More Intel SKL and KBL works
   - More device support for Intel SST Atom (mostly for cheap tablets
     and 2-in-1 devices)
   - Support for Rockchip PDM controllers
   - Support for STM32 I2S and S/PDIF controllers
   - Support for ZTE AUD96P22 codecs

  HD-audio:
   - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
     for HP and Dell machines
   - A few more fixes for i915 component binding"

* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
  ALSA: hda - Fix unbalance of i915 module refcount
  ASoC: Intel: Skylake: Remove driver debugfs exit
  ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
  ALSA: hda/realtek - Remove GPIO_MASK
  ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
  ALSA: pcm: add a documentation for tracepoints
  ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
  ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
  ASoC: Intel: Skylake: Add support to read firmware registers
  ASoC: Intel: Skylake: Add sram address to sst_addr structure
  ASoC: Intel: Skylake: Debugfs facility to dump module config
  ASoC: Intel: Skylake: Add debugfs support
  ASoC: fix semicolon.cocci warnings
  ASoC: rt5645: Add quirk override by module option
  ASoC: rsnd: make arrays path and cmd_case static const
  ASoC: audio-graph-card: add widgets and routing for external amplifier support
  ASoC: audio-graph-card: update bindings for amplifier support
  ASoC: rt5665: calibration should be done before jack detection
  ASoC: rsnd: constify dev_pm_ops structures.
  ASoC: nau8825: change crosstalk-bypass property to bool type
  ...
2017-07-06 10:56:51 -07:00
Ingo Molnar
ac6424b981 sched/wait: Rename wait_queue_t => wait_queue_entry_t
Rename:

	wait_queue_t		=>	wait_queue_entry_t

'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.

Start sorting this out by renaming it to 'wait_queue_entry_t'.

This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 12:18:27 +02:00
Takashi Iwai
111b0cdb97 ALSA: seq: Allow the modular sequencer registration
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand.  In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module.  We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.

However, this is basically a overshoot.  The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.

This patch achieves that by rewriting Kconfig slightly.  Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.

Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.

Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12 08:43:33 +02:00
Takashi Iwai
8272115578 ALSA: synth: Select snd-emux-synth explicitly
Instead of the non-standard way to enable the build of snd-emux-synth
module inside Makefile, rewrite Kconfig to select the item explicitly
from each driver (sbawe and emu10k1).  This is the standard way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 22:10:06 +02:00
Takashi Iwai
0181307abc ALSA: seq: Reorganize kconfig and build
This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.

The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig.  OK, that's easy.

The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module.  The driver that requires such sequencer components select
exclusively the kconfig items.  This is more straightforward and
standard way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 22:10:06 +02:00
Takashi Iwai
3d774d5ef0 ALSA: seq: Allow the tristate build of OSS emulation
Currently OSS sequencer emulation is tied with ALSA sequencer core,
both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y,
the OSS sequencer emulation is also always built-in, even though the
functionality can be built as an individual module.

This patch changes the rule and allows users to build snd-seq-oss
module while others are built-in.  Essentially, it's just a few simple
changes in Kconfig and Makefile.  Some driver codes like opl3 need to
convert from the simple ifdef to IS_ENABLED().  But that's all.

You might wonder how about the dependency: right, it can be messy, but
it still works.  Since we rewrote the sequencer binding with the
standard bus, the driver can be bound at any time on demand.  So, the
synthesizer driver module can be loaded individually from the OSS
emulation core before/after it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 22:09:45 +02:00
Takashi Iwai
7b3f477636 ALSA: wss: Constify hw_constraints
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 10:42:48 +02:00
Takashi Iwai
b078bbfbb1 ALSA: sb: Constify hw_constraints
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 10:42:48 +02:00
Takashi Iwai
bfa516a109 ALSA: gus: Constify hw_constraints
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 10:42:47 +02:00
Takashi Iwai
21709121fb ALSA: es18xx: Constify hw_constraints
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 10:42:47 +02:00
Takashi Iwai
4ea2bb7311 ALSA: es1688: Constify hw_constraints
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 10:42:47 +02:00
Takashi Iwai
0adaf3bea1 ALSA: cs423x: Constify hw_constraints
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 10:42:46 +02:00
Takashi Iwai
4b83eff81c ALSA: sb: Convert to the new PCM ops
Replace the copy and the silence ops with the new PCM ops.
For avoiding the code redundancy, slightly hackish macros are
introduced.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-02 19:38:02 +02:00
Takashi Iwai
a6970bb1dd ALSA: gus: Convert to the new PCM ops
Replace the copy and the silence ops with the new PCM ops.
For simplifying the code a bit, two local helpers are introduced here:
get_bpos() and playback_copy_ack().

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-02 19:38:01 +02:00
Takashi Sakamoto
6dbaf8b913 ALSA: sb: remove needless evaluation in implementation for copy callback
In design of ALSA pcm core, 'struct snd_pcm_ops.copy' is expected to
copy PCM frames, according to frame alignment on intermediate buffer for
userspace and dedicated buffer for data transmission. In this callback,
value of 'channel' argument depends on the frame alignment, which drivers
registers to runtime of PCM substream. When target devices can handle
non-interleaved buffer, this value has positive value, otherwise negative.

ALSA driver for PCM component of EMU8000 chip is programmed with local
macro to switch the frame alignment. The 'copy' operation in
non-interleaved side has evaluation of the 'channel' argument (actually
it's 'voice' argument). This is useless.

This commit remove the evaluation.

[tiwai: the negative channel argument was the inheritance from the old
 code where -1 was meant for interleaved mode.  The mix-up was dropped
 meanwhile, thus it's correct to assume that we receive no longer -1
 there, and it's safe to cleanup the relevant code.

 Also, voice=0 for channel==1 is trivial, and it can be dropped, too.]

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-24 23:49:38 +02:00
Takashi Sakamoto
097a7fe369 ALSA: gus: remove unused local flag
ALSA driver series for devices of Gravis Ultra Sound includes local
variable 'snd_gf1_pcm_use_dma'. Although this is a flag to change
behaviours of local implementations for 'struct snd_pcm_ops.copy' and
'struct snd_pcm_ops.silence', it's invariable during module lifetime.

This commit removes this local variable and the relevant operations.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-24 23:47:42 +02:00
Bhumika Goyal
3a84d6c940 ALSA: sound/isa: constify snd_kcontrol_new structures
Declare snd_kcontrol_new structures as const as they are only passed an
argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const.
Done using Coccinelle:

@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};

@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)

@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p

@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-21 09:07:56 +02:00
Takashi Iwai
a0af56de2c ALSA: sb: Use IS_REACHABLE()
Replace the complex ifdef conditions with IS_REACHABLE() macro.
No functional changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-17 07:13:06 +02:00
Takashi Iwai
88faa38435 ALSA: cmi8238: Use IS_ENABLED()
Simplify the ifdef conditions with IS_ENABLED() macro.
No functional changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-17 07:13:05 +02:00
Linus Torvalds
291b38a756 Annotation of module parameters that specify device settings
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAWPiW6vSw1s6N8H32AQLOrw/+NTqGf7bjq+64YKS6NfR0XDgE+wNJltGO
 ck7zJW3NHIg76RNu8s0I9xg5aVmwizz3Z5DGROZquaolnezux4tQihZ3AFyxIzLc
 +Y3WHYagcML7yFfjl/WznCLRD5EW3yPln4lCvQO0nW/xICRYeRI057JaIbi2Dtek
 BhcXt3c4AjXDLdYJkgtHV3p2R2mt8hcdFdWqqx6s7JaIThZNRGNzxAgtbcB9k5IW
 HVG9ZEIL73VBYWHrYivzjHYF5rBnNCPt87eOwDQeTOSkhv8te+u9k+bH8vxZw1T0
 XUtDrLBndKiuVo2GUfLkkF8LItx3Q9eLCJYy0joaIliyPqTEsPx9KjQ+Af0cxS9s
 ZPCZ5SYf96stKmDeL5xaMfrAmeyVHJ4lc4JTOqdzbIT8blsOSfYO/03p0ALShSDv
 /RQLaKGlf8Bjoy8PwKFcXb4sIDufcd/U1Av/EMFXxOfgN/u2JUkGKq6EaIM5B68L
 fHPje+aR9VNELPmPjwNOWtmN4I79EH3EItQf7zv0KG+UeKhcHLx/EAcSJ3ZRKEkH
 Lathg7pPOEJGArPiVO79TZzBG01ADn1aiwv65XObMzNZ+54xI/mN/Y1DNF/kL5jU
 XzvNzEjFt8mwMIZGVNdAt4+pDyMfIZGZSyUkSRKFnaQZMIvQrfQIU9RLBYLX5eOx
 +/p0VkIwDpg=
 =lbS7
 -----END PGP SIGNATURE-----

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull hw lockdown support from David Howells:
 "Annotation of module parameters that configure hardware resources
  including ioports, iomem addresses, irq lines and dma channels.

  This allows a future patch to prohibit the use of such module
  parameters to prevent that hardware from being abused to gain access
  to the running kernel image as part of locking the kernel down under
  UEFI secure boot conditions.

  Annotations are made by changing:

        module_param(n, t, p)
        module_param_named(n, v, t, p)
        module_param_array(n, t, m, p)

  to:

        module_param_hw(n, t, hwtype, p)
        module_param_hw_named(n, v, t, hwtype, p)
        module_param_hw_array(n, t, hwtype, m, p)

  where the module parameter refers to a hardware setting

  hwtype specifies the type of the resource being configured. This can
  be one of:

        ioport          Module parameter configures an I/O port
        iomem           Module parameter configures an I/O mem address
        ioport_or_iomem Module parameter could be either (runtime set)
        irq             Module parameter configures an I/O port
        dma             Module parameter configures a DMA channel
        dma_addr        Module parameter configures a DMA buffer address
        other           Module parameter configures some other value

  Note that the hwtype is compile checked, but not currently stored (the
  lockdown code probably won't require it). It is, however, there for
  future use.

  A bonus is that the hwtype can also be used for grepping.

  The intention is for the kernel to ignore or reject attempts to set
  annotated module parameters if lockdown is enabled. This applies to
  options passed on the boot command line, passed to insmod/modprobe or
  direct twiddling in /sys/module/ parameter files.

  The module initialisation then needs to handle the parameter not being
  set, by (1) giving an error, (2) probing for a value or (3) using a
  reasonable default.

  What I can't do is just reject a module out of hand because it may
  take a hardware setting in the module parameters. Some important
  modules, some ipmi stuff for instance, both probe for hardware and
  allow hardware to be manually specified; if the driver is aborts with
  any error, you don't get any ipmi hardware.

  Further, trying to do this entirely in the module initialisation code
  doesn't protect against sysfs twiddling.

  [!] Note that in and of itself, this series of patches should have no
      effect on the the size of the kernel or code execution - that is
      left to a patch in the next series to effect. It does mark
      annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
      an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
  Annotate hardware config module parameters in sound/pci/
  Annotate hardware config module parameters in sound/oss/
  Annotate hardware config module parameters in sound/isa/
  Annotate hardware config module parameters in sound/drivers/
  Annotate hardware config module parameters in fs/pstore/
  Annotate hardware config module parameters in drivers/watchdog/
  Annotate hardware config module parameters in drivers/video/
  Annotate hardware config module parameters in drivers/tty/
  Annotate hardware config module parameters in drivers/staging/vme/
  Annotate hardware config module parameters in drivers/staging/speakup/
  Annotate hardware config module parameters in drivers/staging/media/
  Annotate hardware config module parameters in drivers/scsi/
  Annotate hardware config module parameters in drivers/pcmcia/
  Annotate hardware config module parameters in drivers/pci/hotplug/
  Annotate hardware config module parameters in drivers/parport/
  Annotate hardware config module parameters in drivers/net/wireless/
  Annotate hardware config module parameters in drivers/net/wan/
  Annotate hardware config module parameters in drivers/net/irda/
  Annotate hardware config module parameters in drivers/net/hamradio/
  Annotate hardware config module parameters in drivers/net/ethernet/
  ...
2017-05-10 19:13:03 -07:00
David Howells
e992ef5705 Annotate hardware config module parameters in sound/isa/
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in sound/isa/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jaroslav Kysela <perex@perex.cz>
cc: Takashi Iwai <tiwai@suse.com>
cc: alsa-devel@alsa-project.org
2017-04-20 12:02:32 +01:00
Nicolas Iooss
cd7d1eab85 ALSA: es1688: Use strcpy() instead of sprintf()
There is no point in using sprintf() without a format string when
strcpy() can perform the same operation.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20 12:24:34 +01:00
Ingo Molnar
174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Takashi Iwai
9021b2b8fd ALSA: isa: Constify snd_rawmidi_ops
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi,
we can constify the definitions.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-12 12:50:16 +01:00
William Breathitt Gray
1524c7191b ALSA: adlib: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:52 +02:00
William Breathitt Gray
ab55c0500d ALSA: galaxy: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:52 +02:00
William Breathitt Gray
af486dd82b ALSA: sc6000: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:51 +02:00
William Breathitt Gray
a04236e213 ALSA: gusclassic: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:50 +02:00
William Breathitt Gray
bfc7e0ffce ALSA: gusextreme: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:50 +02:00
William Breathitt Gray
a99e8c625d ALSA: gusmax: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:49 +02:00
William Breathitt Gray
ec5c089699 ALSA: cs4231: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:48 +02:00
William Breathitt Gray
042c576ca4 ALSA: cmi8328: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:47 +02:00
William Breathitt Gray
d2fd147c59 ALSA: ad1848: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:47 +02:00
William Breathitt Gray
fc733cf98c ALSA: jazz16: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:46 +02:00
William Breathitt Gray
bb974b8f7b ALSA: sb8: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:45 +02:00
Dan Carpenter
84d7a4470d ALSA: isa/wavefront: prevent some out of bound writes
"header->number" can be up to USHRT_MAX and it comes from the ioctl so
it needs to be capped.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-08 11:39:44 +02:00
William Breathitt Gray
dc5027a723 ALSA: sscape: Use correct format identifier for size_t
The 'size' member of a struct firmware is passed to snd_printk with a
respective format string using the %d identifier. The 'size' member is
of type size_t, but format identifier %d indicates a signed int data
type. This patch replaces the %d format identifier with the correct %zu
format identifier for size_t data types.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-11 16:06:17 +02:00
Takashi Iwai
61595dca74 ALSA: Add missing dependency on CONFIG_SND_TIMER
Since the build of PCM timer may be disabled via Kconfig now, each
driver that provides a timer interface needs to set CONFIG_SND_TIMER
explicitly.  Otherwise it may get a build error due to missing
symbol.

Fixes: 90bbaf66ee ('ALSA: timer: add config item to export PCM timer disabling for expert')
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-27 07:10:38 +01:00
Fabian Frederick
1b12e4cac9 ALSA: gus: use swap() in snd_ics_put_double()
Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-12 20:46:29 +02:00
Joe Perches
9a303dc7ba sound: Deparenthesize negative error returns
Make the returns a bit more kernel standard style.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-24 11:41:37 +01:00
Takashi Iwai
4aa01c408b Merge branch 'for-linus' into for-next
Merging the HD-audio fixes back to base devel branch for further
working on it.
2015-03-09 08:42:00 +01:00
Dan Carpenter
096a020a9e ALSA: msnd: add some missing curly braces
There were some curly braces intended here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05 13:02:10 +01:00
Takashi Iwai
056622053b ALSA: seq: Define driver object in each driver
This patch moves the driver object initialization and allocation to
each driver's module init/exit code like other normal drivers.  The
snd_seq_driver struct is now published in seq_device.h, and each
driver is responsible to define it with proper driver attributes
(name, probe and remove) with snd_seq_driver specific attributes as id
and argsize fields.  The helper functions snd_seq_driver_register(),
snd_seq_driver_unregister() and module_snd_seq_driver() are used for
simplifying codes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 14:15:54 +01:00
Takashi Iwai
976412fbc9 ALSA: Include linux/uaccess.h and linux/bitopts.h instead of asm/*
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 17:25:07 +01:00
Takashi Iwai
6cbbfe1c8d ALSA: Include linux/io.h instead of asm/io.h
Nowadays it's recommended.  Replace all in a shot.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 16:49:33 +01:00
Arnd Bergmann
37419584ab ALSA: sscape: add missing include of linux/io.h
The soundscape driver uses the ISA inb/outb functions declared
in linux/io.h, so it needs to include this header to avoid
a build error:

sscape.c: In function 'sscape_write_unsafe':
sscape.c:203:2: error: implicit declaration of function 'outb' [-Werror=implicit-function-declaration]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 16:27:46 +01:00
Takashi Iwai
b843ce7425 ALSA: wavefront: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:28 +01:00
Takashi Iwai
f05b412773 ALSA: sb: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:28 +01:00
David Flater
d2866409ba ALSA: log emu8000 DRAM size at level INFO
Detected sound font memory goes unreported unless the kernel was built with
ALSA debugging enabled.  Elevate that to a pr_info.

Signed-off-by: David Flater <dave@flaterco.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12 14:30:00 +01:00
David Flater
1730fd9cce ALSA: fix emu8000 DRAM sizing for AWE64 Value
Applicable to any kernel since 2013:

The special case added in commit 1338fc97d0 did not handle the possibility
that the address space on an AWE64 Value would wrap around at 512 KiB.  That
is what it does, so the memory is still not detected on those cards.

Fix that with a logic clean-up that eliminates the need for a special case.

Signed-off-by: David Flater <dave@flaterco.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12 14:28:56 +01:00