Commit Graph

28 Commits

Author SHA1 Message Date
Ahmad Fatoum
be07858fbf KEYS: trusted: allow use of TEE as backend without TCG_TPM support
With recent rework, trusted keys are no longer limited to TPM as trust
source. The Kconfig symbol is unchanged however leading to a few issues:

  - TCG_TPM is required, even if only TEE is to be used
  - Enabling TCG_TPM, but excluding it from available trusted sources
    is not possible
  - TEE=m && TRUSTED_KEYS=y will lead to TEE support being silently
    dropped, which is not the best user experience

Remedy these issues by introducing two new boolean Kconfig symbols:
TRUSTED_KEYS_TPM and TRUSTED_KEYS_TEE with the appropriate
dependencies.

Any new code depending on the TPM trusted key backend in particular
or symbols exported by it will now need to explicitly state that it

  depends on TRUSTED_KEYS && TRUSTED_KEYS_TPM

The latter to ensure the dependency is built and the former to ensure
it's reachable for module builds. There are no such users yet.

Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Tested-by: Andreas Rammhold <andreas@rammhold.de>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E)
Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-05-23 18:47:50 +03:00
Yael Tzur
cd3bc044af KEYS: encrypted: Instantiate key with user-provided decrypted data
For availability and performance reasons master keys often need to be
released outside of a Key Management Service (KMS) to clients. It
would be beneficial to provide a mechanism where the
wrapping/unwrapping of data encryption keys (DEKs) is not dependent
on a remote call at runtime yet security is not (or only minimally)
compromised. Master keys could be securely stored in the Kernel and
be used to wrap/unwrap keys from Userspace.

The encrypted.c class supports instantiation of encrypted keys with
either an already-encrypted key material, or by generating new key
material based on random numbers. This patch defines a new datablob
format: [<format>] <master-key name> <decrypted data length>
<decrypted data> that allows to inject and encrypt user-provided
decrypted data. The decrypted data must be hex-ascii encoded.

Signed-off-by: Yael Tzur <yaelt@google.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-02-21 19:47:45 -05:00
Stephan Müller
d3b04a4398 security: DH - use KDF implementation from crypto API
The kernel crypto API provides the SP800-108 counter KDF implementation.
Thus, the separate implementation provided as part of the keys subsystem
can be replaced with calls to the KDF offered by the kernel crypto API.

The keys subsystem uses the counter KDF with a hash primitive. Thus,
it only uses the call to crypto_kdf108_ctr_generate.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-11-26 16:25:17 +11:00
James Bottomley
f221974525 security: keys: trusted: use ASN.1 TPM2 key format for the blobs
Modify the TPM2 key format blob output to export and import in the
ASN.1 form for TPM2 sealed object keys.  For compatibility with prior
trusted keys, the importer will also accept two TPM2B quantities
representing the public and private parts of the key.  However, the
export via keyctl pipe will only output the ASN.1 format.

The benefit of the ASN.1 format is that it's a standard and thus the
exported key can be used by userspace tools (openssl_tpm2_engine,
openconnect and tpm2-tss-engine).  The format includes policy
specifications, thus it gets us out of having to construct policy
handles in userspace and the format includes the parent meaning you
don't have to keep passing it in each time.

This patch only implements basic handling for the ASN.1 format, so
keys with passwords but no policy.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14 16:30:30 +03:00
Gabriel Krisman Bertazi
8fe62e0c0e watch_queue: Drop references to /dev/watch_queue
The merged API doesn't use a watch_queue device, but instead relies on
pipes, so let the documentation reflect that.

Fixes: f7e47677e3 ("watch_queue: Add a key/keyring notification facility")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
2021-01-21 16:16:08 +00:00
Linus Torvalds
6c32978414 Notifications over pipes + Keyring notifications
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl7U/i8ACgkQ+7dXa6fL
 C2u2eg/+Oy6ybq0hPovYVkFI9WIG7ZCz7w9Q6BEnfYMqqn3dnfJxKQ3l4pnQEOWw
 f4QfvpvevsYfMtOJkYcG6s66rQgbFdqc5TEyBBy0QNp3acRolN7IXkcopvv9xOpQ
 JxedpbFG1PTFLWjvBpyjlrUPouwLzq2FXAf1Ox0ZIMw6165mYOMWoli1VL8dh0A0
 Ai7JUB0WrvTNbrwhV413obIzXT/rPCdcrgbQcgrrLPex8lQ47ZAE9bq6k4q5HiwK
 KRzEqkQgnzId6cCNTFBfkTWsx89zZunz7jkfM5yx30MvdAtPSxvvpfIPdZRZkXsP
 E2K9Fk1/6OQZTC0Op3Pi/bt+hVG/mD1p0sQUDgo2MO3qlSS+5mMkR8h3mJEgwK12
 72P4YfOJkuAy2z3v4lL0GYdUDAZY6i6G8TMxERKu/a9O3VjTWICDOyBUS6F8YEAK
 C7HlbZxAEOKTVK0BTDTeEUBwSeDrBbvH6MnRlZCG5g1Fos2aWP0udhjiX8IfZLO7
 GN6nWBvK1fYzfsUczdhgnoCzQs3suoDo04HnsTPGJ8De52T4x2RsjV+gPx0nrNAq
 eWChl1JvMWsY2B3GLnl9XQz4NNN+EreKEkk+PULDGllrArrPsp5Vnhb9FJO1PVCU
 hMDJHohPiXnKbc8f4Bd78OhIvnuoGfJPdM5MtNe2flUKy2a2ops=
 =YTGf
 -----END PGP SIGNATURE-----

Merge tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull notification queue from David Howells:
 "This adds a general notification queue concept and adds an event
  source for keys/keyrings, such as linking and unlinking keys and
  changing their attributes.

  Thanks to Debarshi Ray, we do have a pull request to use this to fix a
  problem with gnome-online-accounts - as mentioned last time:

     https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47

  Without this, g-o-a has to constantly poll a keyring-based kerberos
  cache to find out if kinit has changed anything.

  [ There are other notification pending: mount/sb fsinfo notifications
    for libmount that Karel Zak and Ian Kent have been working on, and
    Christian Brauner would like to use them in lxc, but let's see how
    this one works first ]

  LSM hooks are included:

   - A set of hooks are provided that allow an LSM to rule on whether or
     not a watch may be set. Each of these hooks takes a different
     "watched object" parameter, so they're not really shareable. The
     LSM should use current's credentials. [Wanted by SELinux & Smack]

   - A hook is provided to allow an LSM to rule on whether or not a
     particular message may be posted to a particular queue. This is
     given the credentials from the event generator (which may be the
     system) and the watch setter. [Wanted by Smack]

  I've provided SELinux and Smack with implementations of some of these
  hooks.

  WHY
  ===

  Key/keyring notifications are desirable because if you have your
  kerberos tickets in a file/directory, your Gnome desktop will monitor
  that using something like fanotify and tell you if your credentials
  cache changes.

  However, we also have the ability to cache your kerberos tickets in
  the session, user or persistent keyring so that it isn't left around
  on disk across a reboot or logout. Keyrings, however, cannot currently
  be monitored asynchronously, so the desktop has to poll for it - not
  so good on a laptop. This facility will allow the desktop to avoid the
  need to poll.

  DESIGN DECISIONS
  ================

   - The notification queue is built on top of a standard pipe. Messages
     are effectively spliced in. The pipe is opened with a special flag:

        pipe2(fds, O_NOTIFICATION_PIPE);

     The special flag has the same value as O_EXCL (which doesn't seem
     like it will ever be applicable in this context)[?]. It is given up
     front to make it a lot easier to prohibit splice&co from accessing
     the pipe.

     [?] Should this be done some other way?  I'd rather not use up a new
         O_* flag if I can avoid it - should I add a pipe3() system call
         instead?

     The pipe is then configured::

        ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
        ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);

     Messages are then read out of the pipe using read().

   - It should be possible to allow write() to insert data into the
     notification pipes too, but this is currently disabled as the
     kernel has to be able to insert messages into the pipe *without*
     holding pipe->mutex and the code to make this work needs careful
     auditing.

   - sendfile(), splice() and vmsplice() are disabled on notification
     pipes because of the pipe->mutex issue and also because they
     sometimes want to revert what they just did - but one or more
     notification messages might've been interleaved in the ring.

   - The kernel inserts messages with the wait queue spinlock held. This
     means that pipe_read() and pipe_write() have to take the spinlock
     to update the queue pointers.

   - Records in the buffer are binary, typed and have a length so that
     they can be of varying size.

     This allows multiple heterogeneous sources to share a common
     buffer; there are 16 million types available, of which I've used
     just a few, so there is scope for others to be used. Tags may be
     specified when a watchpoint is created to help distinguish the
     sources.

   - Records are filterable as types have up to 256 subtypes that can be
     individually filtered. Other filtration is also available.

   - Notification pipes don't interfere with each other; each may be
     bound to a different set of watches. Any particular notification
     will be copied to all the queues that are currently watching for it
     - and only those that are watching for it.

   - When recording a notification, the kernel will not sleep, but will
     rather mark a queue as having lost a message if there's
     insufficient space. read() will fabricate a loss notification
     message at an appropriate point later.

   - The notification pipe is created and then watchpoints are attached
     to it, using one of:

        keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
        watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
        watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);

     where in both cases, fd indicates the queue and the number after is
     a tag between 0 and 255.

   - Watches are removed if either the notification pipe is destroyed or
     the watched object is destroyed. In the latter case, a message will
     be generated indicating the enforced watch removal.

  Things I want to avoid:

   - Introducing features that make the core VFS dependent on the
     network stack or networking namespaces (ie. usage of netlink).

   - Dumping all this stuff into dmesg and having a daemon that sits
     there parsing the output and distributing it as this then puts the
     responsibility for security into userspace and makes handling
     namespaces tricky. Further, dmesg might not exist or might be
     inaccessible inside a container.

   - Letting users see events they shouldn't be able to see.

  TESTING AND MANPAGES
  ====================

   - The keyutils tree has a pipe-watch branch that has keyctl commands
     for making use of notifications. Proposed manual pages can also be
     found on this branch, though a couple of them really need to go to
     the main manpages repository instead.

     If the kernel supports the watching of keys, then running "make
     test" on that branch will cause the testing infrastructure to spawn
     a monitoring process on the side that monitors a notifications pipe
     for all the key/keyring changes induced by the tests and they'll
     all be checked off to make sure they happened.

        https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch

   - A test program is provided (samples/watch_queue/watch_test) that
     can be used to monitor for keyrings, mount and superblock events.
     Information on the notifications is simply logged to stdout"

* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  smack: Implement the watch_key and post_notification hooks
  selinux: Implement the watch_key security hook
  keys: Make the KEY_NEED_* perms an enum rather than a mask
  pipe: Add notification lossage handling
  pipe: Allow buffers to be marked read-whole-or-error for notifications
  Add sample notification program
  watch_queue: Add a key/keyring notification facility
  security: Add hooks to rule on setting a watch
  pipe: Add general notification queue support
  pipe: Add O_NOTIFICATION_PIPE
  security: Add a hook for the point of notification insertion
  uapi: General notification queue definitions
2020-06-13 09:56:21 -07:00
Jason A. Donenfeld
521fd61c84 security/keys: rewrite big_key crypto to use library interface
A while back, I noticed that the crypto and crypto API usage in big_keys
were entirely broken in multiple ways, so I rewrote it. Now, I'm
rewriting it again, but this time using the simpler ChaCha20Poly1305
library function. This makes the file considerably more simple; the
diffstat alone should justify this commit. It also should be faster,
since it no longer requires a mutex around the "aead api object" (nor
allocations), allowing us to encrypt multiple items in parallel. We also
benefit from being able to pass any type of pointer, so we can get rid
of the ridiculously complex custom page allocator that big_key really
doesn't need.

[DH: Change the select CRYPTO_LIB_CHACHA20POLY1305 to a depends on as
 select doesn't propagate and the build can end up with an =y dependending
 on some =m pieces.

 The depends on CRYPTO also had to be removed otherwise the configurator
 complains about a recursive dependency.]

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: kernel-hardening@lists.openwall.com
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-02 17:22:31 +01:00
David Howells
f7e47677e3 watch_queue: Add a key/keyring notification facility
Add a key/keyring change notification facility whereby notifications about
changes in key and keyring content and attributes can be received.

Firstly, an event queue needs to be created:

	pipe2(fds, O_NOTIFICATION_PIPE);
	ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, 256);

then a notification can be set up to report notifications via that queue:

	struct watch_notification_filter filter = {
		.nr_filters = 1,
		.filters = {
			[0] = {
				.type = WATCH_TYPE_KEY_NOTIFY,
				.subtype_filter[0] = UINT_MAX,
			},
		},
	};
	ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
	keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);

After that, records will be placed into the queue when events occur in
which keys are changed in some way.  Records are of the following format:

	struct key_notification {
		struct watch_notification watch;
		__u32	key_id;
		__u32	aux;
	} *n;

Where:

	n->watch.type will be WATCH_TYPE_KEY_NOTIFY.

	n->watch.subtype will indicate the type of event, such as
	NOTIFY_KEY_REVOKED.

	n->watch.info & WATCH_INFO_LENGTH will indicate the length of the
	record.

	n->watch.info & WATCH_INFO_ID will be the second argument to
	keyctl_watch_key(), shifted.

	n->key will be the ID of the affected key.

	n->aux will hold subtype-dependent information, such as the key
	being linked into the keyring specified by n->key in the case of
	NOTIFY_KEY_LINKED.

Note that it is permissible for event records to be of variable length -
or, at least, the length may be dependent on the subtype.  Note also that
the queue can be shared between multiple notifications of various types.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2020-05-19 15:19:06 +01:00
Eric Biggers
601f0093f2 KEYS: remove CONFIG_KEYS_COMPAT
KEYS_COMPAT now always takes the value of COMPAT && KEYS.  But the
security/keys/ directory is only compiled if KEYS is enabled, so in
practice KEYS_COMPAT is the same as COMPAT.  Therefore, remove the
unnecessary KEYS_COMPAT and just use COMPAT directly.

(Also remove an outdated comment from compat.c.)

Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-12-12 23:41:17 +02:00
Linus Torvalds
c236b6dd48 request_key improvements
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAXRPObfu3V2unywtrAQJLKA//WENO5pZDHe49T+4GCY0ZmnGHKBUnU7g9
 DUjxSNS8a/nwCyEdApZk9uHp2xsOedP6pjQ4VRWMQfrIPx0Yh9o3J+BQxvyP7PDf
 jEH+5CYC8dZnJJjjteWCcPEGrUoNb1YKfDRBU745YY+rLdHWvhHc27B6SYBg5BGT
 OwW3qyHvp0WMp7TehMALdnkqGph5gR5QMr45tOrH6DkGAhN8mAIKD699d3MqZG73
 +S5KlQOlDlEVrxbD/BgzlzEJQUBQyq8hd61taBFT7LXBNlLJJOnMhd7UJY5IJE7J
 Vi9NpcLj4Emwv4wvZ2xneV0rMbsCbxRMKZLDRuqQ6Tm17xjpjro4n1ujneTAqmmy
 d+XlrVQ2ZMciMNmGleezOoBib9QbY5NWdilc2ls5ydFGiBVL73bIOYtEQNai8lWd
 LBBIIrxOmLO7bnipgqVKRnqeMdMkpWaLISoRfSeJbRt4lGxmka9bDBrSgONnxzJK
 JG+sB8ahSVZaBbhERW8DKnBz61Yf8ka7ijVvjH3zCXu0rbLTy+LLUz5kbzbBP9Fc
 LiUapLV/v420gD2ZRCgPQwtQui4TpBkSGJKS1Ippyn7LGBNCZLM4Y8vOoo4nqr7z
 RhpEKbKeOdVjORaYjO8Zttj8gN9rT6WnPcyCTHdNEnyjotU1ykyVBkzexj+VYvjM
 C3eIdjG7Jk0=
 =c2FO
 -----END PGP SIGNATURE-----

Merge tag 'keys-request-20190626' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull request_key improvements from David Howells:
 "These are all request_key()-related, including a fix and some improvements:

   - Fix the lack of a Link permission check on a key found by
     request_key(), thereby enabling request_key() to link keys that
     don't grant this permission to the target keyring (which must still
     grant Write permission).

     Note that the key must be in the caller's keyrings already to be
     found.

   - Invalidate used request_key authentication keys rather than
     revoking them, so that they get cleaned up immediately rather than
     hanging around till the expiry time is passed.

   - Move the RCU locks outwards from the keyring search functions so
     that a request_key_rcu() can be provided. This can be called in RCU
     mode, so it can't sleep and can't upcall - but it can be called
     from LOOKUP_RCU pathwalk mode.

   - Cache the latest positive result of request_key*() temporarily in
     task_struct so that filesystems that make a lot of request_key()
     calls during pathwalk can take advantage of it to avoid having to
     redo the searching. This requires CONFIG_KEYS_REQUEST_CACHE=y.

     It is assumed that the key just found is likely to be used multiple
     times in each step in an RCU pathwalk, and is likely to be reused
     for the next step too.

     Note that the cleanup of the cache is done on TIF_NOTIFY_RESUME,
     just before userspace resumes, and on exit"

* tag 'keys-request-20190626' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  keys: Kill off request_key_async{,_with_auxdata}
  keys: Cache result of request_key*() temporarily in task_struct
  keys: Provide request_key_rcu()
  keys: Move the RCU locks outwards from the keyring search functions
  keys: Invalidate used request_key authentication keys
  keys: Fix request_key() lack of Link perm check on found key
2019-07-08 19:19:37 -07:00
David Howells
7743c48e54 keys: Cache result of request_key*() temporarily in task_struct
If a filesystem uses keys to hold authentication tokens, then it needs a
token for each VFS operation that might perform an authentication check -
either by passing it to the server, or using to perform a check based on
authentication data cached locally.

For open files this isn't a problem, since the key should be cached in the
file struct since it represents the subject performing operations on that
file descriptor.

During pathwalk, however, there isn't anywhere to cache the key, except
perhaps in the nameidata struct - but that isn't exposed to the
filesystems.  Further, a pathwalk can incur a lot of operations, calling
one or more of the following, for instance:

	->lookup()
	->permission()
	->d_revalidate()
	->d_automount()
	->get_acl()
	->getxattr()

on each dentry/inode it encounters - and each one may need to call
request_key().  And then, at the end of pathwalk, it will call the actual
operation:

	->mkdir()
	->mknod()
	->getattr()
	->open()
	...

which may need to go and get the token again.

However, it is very likely that all of the operations on a single
dentry/inode - and quite possibly a sequence of them - will all want to use
the same authentication token, which suggests that caching it would be a
good idea.

To this end:

 (1) Make it so that a positive result of request_key() and co. that didn't
     require upcalling to userspace is cached temporarily in task_struct.

 (2) The cache is 1 deep, so a new result displaces the old one.

 (3) The key is released by exit and by notify-resume.

 (4) The cache is cleared in a newly forked process.

Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19 16:10:15 +01:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Arnd Bergmann
3cd18d1981 security/keys: BIG_KEY requires CONFIG_CRYPTO
The recent rework introduced a possible randconfig build failure
when CONFIG_CRYPTO configured to only allow modules:

security/keys/big_key.o: In function `big_key_crypt':
big_key.c:(.text+0x29f): undefined reference to `crypto_aead_setkey'
security/keys/big_key.o: In function `big_key_init':
big_key.c:(.init.text+0x1a): undefined reference to `crypto_alloc_aead'
big_key.c:(.init.text+0x45): undefined reference to `crypto_aead_setauthsize'
big_key.c:(.init.text+0x77): undefined reference to `crypto_destroy_tfm'
crypto/gcm.o: In function `gcm_hash_crypt_remain_continue':
gcm.c:(.text+0x167): undefined reference to `crypto_ahash_finup'
crypto/gcm.o: In function `crypto_gcm_exit_tfm':
gcm.c:(.text+0x847): undefined reference to `crypto_destroy_tfm'

When we 'select CRYPTO' like the other users, we always get a
configuration that builds.

Fixes: 428490e38b ("security/keys: rewrite all of big_key crypto")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18 09:12:40 +01:00
Jason A. Donenfeld
428490e38b security/keys: rewrite all of big_key crypto
This started out as just replacing the use of crypto/rng with
get_random_bytes_wait, so that we wouldn't use bad randomness at boot
time. But, upon looking further, it appears that there were even deeper
underlying cryptographic problems, and that this seems to have been
committed with very little crypto review. So, I rewrote the whole thing,
trying to keep to the conventions introduced by the previous author, to
fix these cryptographic flaws.

It makes no sense to seed crypto/rng at boot time and then keep
using it like this, when in fact there's already get_random_bytes_wait,
which can ensure there's enough entropy and be a much more standard way
of generating keys. Since this sensitive material is being stored
untrusted, using ECB and no authentication is simply not okay at all. I
find it surprising and a bit horrifying that this code even made it past
basic crypto review, which perhaps points to some larger issues. This
patch moves from using AES-ECB to using AES-GCM. Since keys are uniquely
generated each time, we can set the nonce to zero. There was also a race
condition in which the same key would be reused at the same time in
different threads. A mutex fixes this issue now.

So, to summarize, this commit fixes the following vulnerabilities:

  * Low entropy key generation, allowing an attacker to potentially
    guess or predict keys.
  * Unauthenticated encryption, allowing an attacker to modify the
    cipher text in particular ways in order to manipulate the plaintext,
    which is is even more frightening considering the next point.
  * Use of ECB mode, allowing an attacker to trivially swap blocks or
    compare identical plaintext blocks.
  * Key re-use.
  * Faulty memory zeroing.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: security@kernel.org
Cc: stable@vger.kernel.org
2017-09-25 23:31:58 +01:00
Mat Martineau
7cbe0932c2 KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API
The initial Diffie-Hellman computation made direct use of the MPI
library because the crypto module did not support DH at the time. Now
that KPP is implemented, KEYCTL_DH_COMPUTE should use it to get rid of
duplicate code and leverage possible hardware acceleration.

This fixes an issue whereby the input to the KDF computation would
include additional uninitialized memory when the result of the
Diffie-Hellman computation was shorter than the input prime number.

Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09 13:29:50 +10:00
Bilal Amarni
47b2c3fff4 security/keys: add CONFIG_KEYS_COMPAT to Kconfig
CONFIG_KEYS_COMPAT is defined in arch-specific Kconfigs and is missing for
several 64-bit architectures : mips, parisc, tile.

At the moment and for those architectures, calling in 32-bit userspace the
keyctl syscall would return an ENOSYS error.

This patch moves the CONFIG_KEYS_COMPAT option to security/keys/Kconfig, to
make sure the compatibility wrapper is registered by default for any 64-bit
architecture as long as it is configured with CONFIG_COMPAT.

[DH: Modified to remove arm64 compat enablement also as requested by Eric
 Biggers]

Signed-off-by: Bilal Amarni <bilal.amarni@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
cc: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09 13:29:45 +10:00
Stephan Müller
4cd4ca7cc8 keys: select CONFIG_CRYPTO when selecting DH / KDF
Select CONFIG_CRYPTO in addition to CONFIG_HASH to ensure that
also CONFIG_HASH2 is selected. Both are needed for the shash
cipher support required for the KDF operation.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-11 23:18:09 +01:00
Stephan Mueller
f1c316a3ab KEYS: add SP800-56A KDF support for DH
SP800-56A defines the use of DH with key derivation function based on a
counter. The input to the KDF is defined as (DH shared secret || other
information). The value for the "other information" is to be provided by
the caller.

The KDF is implemented using the hash support from the kernel crypto API.
The implementation uses the symmetric hash support as the input to the
hash operation is usually very small. The caller is allowed to specify
the hash name that he wants to use to derive the key material allowing
the use of all supported hashes provided with the kernel crypto API.

As the KDF implements the proper truncation of the DH shared secret to
the requested size, this patch fills the caller buffer up to its size.

The patch is tested with a new test added to the keyutils user space
code which uses a CAVS test vector testing the compliance with
SP800-56A.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-04 22:33:38 +01:00
Artem Savkov
31e6ec4519 security/keys: make BIG_KEYS dependent on stdrng.
Since BIG_KEYS can't be compiled as module it requires one of the "stdrng"
providers to be compiled into kernel. Otherwise big_key_crypto_init() fails
on crypto_alloc_rng step and next dereference of big_key_skcipher (e.g. in
big_key_preparse()) results in a NULL pointer dereference.

Fixes: 13100a72f4 ('Security: Keys: Big keys stored encrypted')
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Kirill Marinushkin <k.marinushkin@gmail.com>
cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-10-27 16:03:33 +11:00
Mat Martineau
ddbb411487 KEYS: Add KEYCTL_DH_COMPUTE command
This adds userspace access to Diffie-Hellman computations through a
new keyctl() syscall command to calculate shared secrets or public
keys using input parameters stored in the keyring.

Input key ids are provided in a struct due to the current 5-arg limit
for the keyctl syscall. Only user keys are supported in order to avoid
exposing the content of logon or encrypted keys.

The output is written to the provided buffer, based on the assumption
that the values are only needed in userspace.

Future support for other types of key derivation would involve a new
command, like KEYCTL_ECDH_COMPUTE.

Once Diffie-Hellman support is included in the crypto API, this code
can be converted to use the crypto API to take advantage of possible
hardware acceleration and reduce redundant code.

Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12 19:54:58 +01:00
Kirill Marinushkin
13100a72f4 Security: Keys: Big keys stored encrypted
Solved TODO task: big keys saved to shmem file are now stored encrypted.
The encryption key is randomly generated and saved to payload[big_key_data].

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12 19:54:58 +01:00
Jarkko Sakkinen
5ca4c20cfd keys, trusted: select hash algorithm for TPM2 chips
Added 'hash=' option for selecting the hash algorithm for add_key()
syscall and documentation for it.

Added entry for sm3-256 to the following tables in order to support
TPM_ALG_SM3_256:

* hash_algo_name
* hash_digest_size

Includes support for the following hash algorithms:

* sha1
* sha256
* sha384
* sha512
* sm3-256

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
2015-12-20 15:27:12 +02:00
David Howells
dabd39cc2f KEYS: Make /proc/keys unconditional if CONFIG_KEYS=y
Now that /proc/keys is used by libkeyutils to look up a key by type and
description, we should make it unconditional and remove
CONFIG_DEBUG_PROC_KEYS.

Reported-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
2015-01-22 22:34:32 +00:00
Josh Boyer
2eaf6b5dca KEYS: Make BIG_KEYS boolean
Having the big_keys functionality as a module is very marginally useful.
The userspace code that would use this functionality will get odd error
messages from the keys layer if the module isn't loaded.  The code itself
is fairly small, so just have this as a boolean option and not a tristate.

Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: David Howells <dhowells@redhat.com>
2013-10-30 11:15:23 +00:00
David Howells
f36f8c75ae KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
Add support for per-user_namespace registers of persistent per-UID kerberos
caches held within the kernel.

This allows the kerberos cache to be retained beyond the life of all a user's
processes so that the user's cron jobs can work.

The kerberos cache is envisioned as a keyring/key tree looking something like:

	struct user_namespace
	  \___ .krb_cache keyring		- The register
		\___ _krb.0 keyring		- Root's Kerberos cache
		\___ _krb.5000 keyring		- User 5000's Kerberos cache
		\___ _krb.5001 keyring		- User 5001's Kerberos cache
			\___ tkt785 big_key	- A ccache blob
			\___ tkt12345 big_key	- Another ccache blob

Or possibly:

	struct user_namespace
	  \___ .krb_cache keyring		- The register
		\___ _krb.0 keyring		- Root's Kerberos cache
		\___ _krb.5000 keyring		- User 5000's Kerberos cache
		\___ _krb.5001 keyring		- User 5001's Kerberos cache
			\___ tkt785 keyring	- A ccache
				\___ krbtgt/REDHAT.COM@REDHAT.COM big_key
				\___ http/REDHAT.COM@REDHAT.COM user
				\___ afs/REDHAT.COM@REDHAT.COM user
				\___ nfs/REDHAT.COM@REDHAT.COM user
				\___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key
				\___ http/KERNEL.ORG@KERNEL.ORG big_key

What goes into a particular Kerberos cache is entirely up to userspace.  Kernel
support is limited to giving you the Kerberos cache keyring that you want.

The user asks for their Kerberos cache by:

	krb_cache = keyctl_get_krbcache(uid, dest_keyring);

The uid is -1 or the user's own UID for the user's own cache or the uid of some
other user's cache (requires CAP_SETUID).  This permits rpc.gssd or whatever to
mess with the cache.

The cache returned is a keyring named "_krb.<uid>" that the possessor can read,
search, clear, invalidate, unlink from and add links to.  Active LSMs get a
chance to rule on whether the caller is permitted to make a link.

Each uid's cache keyring is created when it first accessed and is given a
timeout that is extended each time this function is called so that the keyring
goes away after a while.  The timeout is configurable by sysctl but defaults to
three days.

Each user_namespace struct gets a lazily-created keyring that serves as the
register.  The cache keyrings are added to it.  This means that standard key
search and garbage collection facilities are available.

The user_namespace struct's register goes away when it does and anything left
in it is then automatically gc'd.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Simo Sorce <simo@redhat.com>
cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
2013-09-24 10:35:19 +01:00
David Howells
ab3c3587f8 KEYS: Implement a big key type that can save to tmpfs
Implement a big key type that can save its contents to tmpfs and thus
swapspace when memory is tight.  This is useful for Kerberos ticket caches.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Simo Sorce <simo@redhat.com>
2013-09-24 10:35:18 +01:00
David Howells
b2a4df200d KEYS: Expand the capacity of a keyring
Expand the capacity of a keyring to be able to hold a lot more keys by using
the previously added associative array implementation.  Currently the maximum
capacity is:

	(PAGE_SIZE - sizeof(header)) / sizeof(struct key *)

which, on a 64-bit system, is a little more 500.  However, since this is being
used for the NFS uid mapper, we need more than that.  The new implementation
gives us effectively unlimited capacity.

With some alterations, the keyutils testsuite runs successfully to completion
after this patch is applied.  The alterations are because (a) keyrings that
are simply added to no longer appear ordered and (b) some of the errors have
changed a bit.

Signed-off-by: David Howells <dhowells@redhat.com>
2013-09-24 10:35:18 +01:00
David Howells
f0894940ae KEYS: Move the key config into security/keys/Kconfig
Move the key config into security/keys/Kconfig as there are going to be a lot
of key-related options.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
2012-05-11 10:56:56 +01:00