a) honour ->s_minfree; don't just go with default (5)
b) don't bother with capability checks until we know we'll need them
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Florian Weimer seems to have a glibc test-case which requires that
loopback interfaces does not get ICMP ratelimited. This was broken by
commit c0303efeab ("net: reduce cycles spend on ICMP replies that
gets rate limited").
An ICMP response will usually be routed back-out the same incoming
interface. Thus, take advantage of this and skip global ICMP
ratelimit when the incoming device is loopback. In the unlikely event
that the outgoing it not loopback, due to strange routing policy
rules, ICMP rate limiting still works via peer ratelimiting via
icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812
(section 4.3.2.8 "Rate Limiting").
This seems to fix the reproducer given by Florian. While still
avoiding to perform expensive and unneeded outgoing route lookup for
rate limited packets (in the non-loopback case).
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: "H.J. Lu" <hjl.tools@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid that the following complaint is reported:
BUG: sleeping function called from invalid context at kernel/workqueue.c:2790
in_atomic(): 1, irqs_disabled(): 0, pid: 41, name: rcuop/3
1 lock held by rcuop/3/41:
#0: (rcu_callback){......}, at: [<ffffffff8111f9a2>] rcu_nocb_kthread+0x282/0x500
Call Trace:
dump_stack+0x86/0xcf
___might_sleep+0x174/0x260
__might_sleep+0x4a/0x80
flush_work+0x7e/0x2e0
__cancel_work_timer+0x143/0x1c0
cancel_work_sync+0x10/0x20
blk_throtl_exit+0x25/0x60
blkcg_exit_queue+0x35/0x40
blk_release_queue+0x42/0x130
kobject_put+0xa9/0x190
This happens since we invoke callbacks that need to block from the
queue release handler. Fix this by pushing the final release to
a workqueue.
Reported-by: Ross Zwisler <zwisler@gmail.com>
Fixes: commit b425e50492 ("block: Avoid that blk_exit_rl() triggers a use-after-free")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Updated changelog
Signed-off-by: Jens Axboe <axboe@fb.com>
I'm reviewing static checker warnings where we do ERR_PTR(0), which is
the same as NULL. I'm pretty sure we intended to return ERR_PTR(-EINVAL)
here. Sometimes these bugs lead to a NULL dereference but I don't
immediately see that problem here.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Storing stats _only_ at new locations is wrong for UFS1; old
locations should always be kept updated. The check for "has
been converted to use of new locations" is also wrong - it
should be "->fs_maxbsize is equal to ->fs_bsize".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The flow of creating a new child goes through ipoib_vlan_add
which allocates a new interface and checks the rtnl_lock.
If the lock is taken, restart_syscall will be called to restart
the system call again. In this case we are not releasing the
already allocated interface, causing a leak.
Fixes: 9baa0b0364 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch mekas init_default and uninit_default symmetric
with a call to delete napi. Additionally, the uninit_default
gained delete napi call in case of init_default fails.
Fixes: 515ed4f3aa ('IB/IPoIB: Separate control and data related initializations')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a need to free priv explicitly and not just to release
the device, child priv is freed explicitly on remove flow and this
patch also includes priv free on error flow in P_key creation
and also in add_port.
Fixes: cd565b4b51 ('IB/IPoIB: Support acceleration options callbacks')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update ->ndo_change_mtu() callback comment to remove text
about returning error in case of undefined callback. This
change makes the comment match the existing code behavior.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit: 0a943cb10c (tools build: Add HOSTARCH Makefile variable)
when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of
ARCH=x86, so the perf build process searchs header files from
tools/arch/x86_64/include, which doesn't exist.
The following build failure is seen:
In file included from util/event.c:2:0:
tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory
compilation terminated.
Fix this issue by using SRCARCH instead of ARCH in perf, just like the
main kernel Makefile and tools/objtool's.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Rui Teng <rui.teng@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0a943cb10c ("tools build: Add HOSTARCH Makefile variable")
Link: http://lkml.kernel.org/r/1491793357-14977-2-git-send-email-jiada_wang@mentor.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 18e7a45af9 ("perf/x86: Reject non sampling events with
precise_ip") returns -EINVAL for sys_perf_event_open() with an attribute
with (attr.precise_ip > 0 && attr.sample_period == 0), just like is done
in the routine used to probe the max precise level when no events were
passed to 'perf record' or 'perf top', i.e.:
perf_evsel__new_cycles()
perf_event_attr__set_max_precise_ip()
The x86 code, in x86_pmu_hw_config(), which is called all the way from
sys_perf_event_open() did, starting with the aforementioned commit:
/* There's no sense in having PEBS for non sampling events: */
if (!is_sampling_event(event))
return -EINVAL;
Which makes it fail for cycles:ppp, cycles:pp and cycles:p, always using
just the non precise cycles variant.
To make sure that this is the case, I tested it, before this patch,
with:
# perf probe -L x86_pmu_hw_config
<x86_pmu_hw_config@/home/acme/git/linux/arch/x86/events/core.c:0>
0 int x86_pmu_hw_config(struct perf_event *event)
1 {
2 if (event->attr.precise_ip) {
<SNIP>
17 if (event->attr.precise_ip > precise)
18 return -EOPNOTSUPP;
/* There's no sense in having PEBS for non sampling events: */
21 if (!is_sampling_event(event))
22 return -EINVAL;
}
<SNIP>
# perf probe x86_pmu_hw_config:22
Added new events:
probe:x86_pmu_hw_config (on x86_pmu_hw_config:22)
probe:x86_pmu_hw_config_1 (on x86_pmu_hw_config:22)
You can now use it in all perf tools, such as:
perf record -e probe:x86_pmu_hw_config_1 -aR sleep 1
# perf trace -e perf_event_open,probe:x86_pmu_hwconfig*/max-stack=16/ perf record usleep 1
0.000 ( 0.015 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.015 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.000 ( 0.021 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.023 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.025 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.023 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.028 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.030 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.028 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
41.018 ( 0.012 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8b5dd0, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.065 ( 0.011 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.080 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.103 ( 0.010 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
41.115 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
41.122 ( 0.004 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
41.128 ( 0.008 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]
#
I.e. that return -EINVAL in x86_pmu_hw_config() is hit three times.
So fix it by just setting attr.sample_period
Now, after this patch:
# perf trace --max-stack=2 -e perf_event_open,probe:x86_pmu_hw_config* perf record usleep 1
[ perf record: Woken up 1 times to write data ]
0.000 ( 0.017 ms): perf/8469 perf_event_open(attr_uptr: 0x7ffe36c27d10, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_open_cloexec_flag (/home/acme/bin/perf)
0.050 ( 0.031 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.092 ( 0.040 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.143 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, cpu: -1, group_fd: -1 ) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
0.161 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.171 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.180 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.190 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
#
The probe one called from perf_event_attr__set_max_precise_ip() works
the first time, with attr.precise_ip = 3, wit hthe next ones being the
per cpu ones for the cycles:ppp event.
And here is the text from a report and alternative proposed patch by
Thomas-Mich Richter:
---
On s390 the counter and sampling facility do not support a precise IP
skid level and sometimes returns EOPNOTSUPP when structure member
precise_ip in struct perf_event_attr is not set to zero.
On s390 commnd 'perf record -- true' fails with error EOPNOTSUPP. This
happens only when no events are specified on command line.
The functions called are
...
--> perf_evlist__add_default
--> perf_evsel__new_cycles
--> perf_event_attr__set_max_precise_ip
The last function determines the value of structure member precise_ip by
invoking the perf_event_open() system call and checking the return code.
The first successful open is the value for precise_ip.
However the value is determined without setting member sample_period and
indicates no sampling.
On s390 the counter facility and sampling facility are different. The
above procedure determines a precise_ip value of 3 using the counter
facility. Later it uses the sampling facility with a value of 3 and
fails with EOPNOTSUPP.
---
v2: Older compilers (e.g. gcc 4.4.7) don't support referencing members
of unnamed union members in the container struct initialization, so
move from:
struct perf_event_attr attr = {
...
.sample_period = 1,
};
to right after it as:
struct perf_event_attr attr = {
...
};
attr.sample_period = 1;
v3: We need to reset .sample_period to 0 to let the users of
perf_evsel__new_cycles() to properly setup attr.sample_period or
attr.sample_freq. Reported by Ingo Molnar.
Reported-and-Acked-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 18e7a45af9 ("perf/x86: Reject non sampling events with precise_ip")
Link: http://lkml.kernel.org/n/tip-yv6nnkl7tzqocrm0hl3x7vf1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Laura reported a sleep-in-atomic kernel warning inside
tcf_act_police_init() which calls gen_replace_estimator() with
spinlock protection.
It is not necessary in this case, we already have RTNL lock here
so it is enough to protect concurrent writers. For the reader,
i.e. tcf_act_police(), it needs to make decision based on this
rate estimator, in the worst case we drop more/less packets than
necessary while changing the rate in parallel, it is still acceptable.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Nick Huber <nicholashuber@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current __ceph_setattr() can set inode's i_ctime to current_time(),
req->r_stamp or attr->ia_ctime. These time stamps may have minor
differences. It may cause potential problem.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph uses ktime_get_real_ts() to get request time stamp. In most
other cases, current_kernel_time() is used to get time stamp for
filesystem operations (called by current_time()).
There is granularity difference between ktime_get_real_ts() and
current_kernel_time(). The later one can be up to one jiffy behind
the former one. This can causes inode's ctime to go back.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Converting a file handle to a dentry can be done call after the inode
unlink. This means that __fh_to_dentry() requires an extra check to
verify the number of links is not 0.
The issue can be easily reproduced using xfstest generic/426, which does
something like:
name_to_handle_at(&fh)
echo 3 > /proc/sys/vm/drop_caches
unlink()
open_by_handle_at(&fh)
The call to open_by_handle_at() should fail, as the file doesn't exist
anymore.
Link: http://tracker.ceph.com/issues/19958
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The driver may sleep under a spin lock, and the function call path is:
post_one_send (acquire the lock by spin_lock_irqsave)
init_send_wqe
copy_from_user --> may sleep
There is no flow that makes "qp->is_user" true, and copy_from_user may
cause bug when a non-user pointer is used. So the lines of copy_from_user
and check of "qp->is_user" are removed.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add 64KB PAGE_SIZE support to user-space CQ, SQ and RQ queues.
De-facto it means that code was added to translate 64KB
pages to smaller 4KB pages that the FW can handle. Otherwise,
the FW would wrap (or jump to the next page) when reaching 4KB
while the user space library will continue on the same large page.
Note that MR code remains as is since the FW supports larger pages
for MRs.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Initialize byte_len in work completion of RDMA_READ and RDMA_SEND.
Exposed by uDAPL application.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some issues observed with FMR implementation
while running stress traffic. So removing the
FMR verbs support for now.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds code to ring RQ Doorbell aggressively
so that the adapter can DMA RQ buffers sooner, instead
of DMA all WQEs in the post_recv WR list together at the
end of the post_recv verb.
Also use spinlock to serialize RQ posting
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
HW stalls out after 0x800000 WQEs are posted for UD QPs.
To workaround this problem, driver will send a modify_qp cmd
to the HW at around the halfway mark(0x400000) so that FW
can accordingly modify the QP context in the HW to prevent this
stall.
This workaround needs to be done for UD, QP1 and Raw Ethertype
packets. Added a counter to keep track of WQEs posted during post_send.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the host buffers are freed before destroying MR in HW,
HW could try accessing these buffers. This could cause a host
crash. Fixing the code to avoid this condition.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch implements the following HW workarounds
1. The SQ depth needs to be augmented by 128 + 1 to avoid running
into an Out of order CQE issue
2. Workaround to handle the problem where the HW fast path engine continues
to access DMA memory in retranmission mode even after the WQE has
already been completed. If the HW reports this condition, driver detects
it and posts a Fence WQE. The driver stops reporting the completions
to stack until it receives completion for Fence WQE.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit e6b9a6c84b
("drm/radeon: Make display watermark calculations more accurate")
made watermark calculations more accurate, but not for > 4k
resolutions on 32-Bit architectures, as it introduced an integer
overflow for those setups and resolutions.
Fix this by proper u64 casting and division.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Fixes: e6b9a6c84b ("drm/radeon: Make display watermark calculations more accurate")
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit d63c277dc6
("drm/amdgpu: Make display watermark calculations more accurate")
made watermark calculations more accurate, but not for > 4k
resolutions on 32-Bit architectures, as it introduced an integer
overflow for those setups and resolutions.
Fix this by proper u64 casting and division.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Fixes: d63c277dc6 ("drm/amdgpu: Make display watermark calculations more accurate")
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DPB must be in VRAM, but not in the first segment.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The caller only cares about zero vs non-zero so this code actually works
fine but we should be returning a negative error code instead of a valid
pointer casted to int.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop log level for blanking from info to debug. Xorg likes to habitually
unblank when already unblanked and this can fill up logs over a long period
of time.
Signed-off-by: Mike Gerow <gerow@google.com>
Cc: bernie@plugable.com
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
When CONFIG_PROC_FS is disabled, we get warnings about unused variables
as remove_proc_entry() evaluates to an empty macro.
drivers/video/fbdev/via/viafbdev.c: In function 'viafb_remove_proc':
drivers/video/fbdev/via/viafbdev.c:1635:4: error: unused variable 'iga2_entry' [-Werror=unused-variable]
drivers/video/fbdev/via/viafbdev.c:1634:4: error: unused variable 'iga1_entry' [-Werror=unused-variable]
These are easy to avoid by using the pointer from the structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Add the missing endianness conversions when printing the USB
device-descriptor idVendor, idProduct and bcdDevice fields during probe.
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
gcc-7 suspects this code might be wrong because we use the
result of a multiplication as a bool:
drivers/video/fbdev/core/fbmon.c: In function 'fb_edid_add_monspecs':
drivers/video/fbdev/core/fbmon.c:1051:84: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
It's actually fine, so let's add a comparison to zero to make
that clear to the compiler too.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
* buffer-dma / buffer-dmaengine
- Fix missing include of buffer_impl.h after the split of buffer.h.
No driver in mainline is currently using these buffers so it wasn't
picked up by automated build tests.
* ad7152
- Fix a deadlock in ad7152_write_raw_samp_freq as the chip_state lock
was already held.
* inv_mpu6050
- Add low pass filter setting for chips newer than the MPU6500. None of
use previously picked up no the fact it was different on these newer
chips. It is separately set for the acceleration on these parts. There
is no normal reason to set it differently so the userspace interface
remains the same as for early parts.
* meson-saradc:
- Fix a potential crash by NULL pointer dereference in
meson_sar_adc_clear_fifo.
* mxs-lradc
- Fix a return value check where IS_ERR is used on a function that returns
NULL on error
-----BEGIN PGP SIGNATURE-----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=BU6h
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-4.12b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second set of IIO fixes for the 4.12 cycle.
* buffer-dma / buffer-dmaengine
- Fix missing include of buffer_impl.h after the split of buffer.h.
No driver in mainline is currently using these buffers so it wasn't
picked up by automated build tests.
* ad7152
- Fix a deadlock in ad7152_write_raw_samp_freq as the chip_state lock
was already held.
* inv_mpu6050
- Add low pass filter setting for chips newer than the MPU6500. None of
use previously picked up no the fact it was different on these newer
chips. It is separately set for the acceleration on these parts. There
is no normal reason to set it differently so the userspace interface
remains the same as for early parts.
* meson-saradc:
- Fix a potential crash by NULL pointer dereference in
meson_sar_adc_clear_fifo.
* mxs-lradc
- Fix a return value check where IS_ERR is used on a function that returns
NULL on error
Commit 4c3b89effc ("powerpc/powernv: Add sanity checks to
pnv_pci_get_{gpu|npu}_dev") introduced explicit warnings in
pnv_pci_get_npu_dev() when a PCIe device has no associated device-tree
node. However not all PCIe devices have an of_node and
pnv_pci_get_npu_dev() gets indirectly called at least once for every
PCIe device in the system. This results in spurious WARN_ON()'s so
remove it.
The same situation should not exist for pnv_pci_get_gpu_dev() as any
NPU based PCIe device requires a device-tree node.
Fixes: 4c3b89effc ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in the connect()
handler of the AF_CAIF socket. Since the syscall doesn't enforce a minimum
size of the corresponding memory region, very short sockaddrs (zero or one
byte long) result in operating on uninitialized memory while referencing
sa_family.
Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixing a concurrency issue with creq handling. Each caller
was given a globally managed crsq element, which was
accessed outside a lock. This could result in corruption,
if lot of applications are simultaneously issuing Control Path
commands. Now, each caller will provide its own response buffer
and the responses will be copied under a lock.
Also, Fixing the queue full condition check for the CMDQ.
As a part of these changes, the control path code is refactored
to remove the code replication in the response status checking.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add buffer_impl.h as buffer.h was split into interface for using and
for internals. Without this industrialio-buffer-dmaengine.c fails
to compile.
Fixes:
commit 33dd94cb97 ("iio:buffer.h - split
into buffer.h and buffer_impl.h")
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add buffer_impl.h as buffer.h was split into interface for using and
for internals. Without this industrialio-buffer-dma.c fails
to compile.
Fixes:
commit 33dd94cb97 ("iio:buffer.h - split
into buffer.h and buffer_impl.h")
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This reverts commit 5ab92a7cb8.
System cannot enter suspend mode because of heartbeat led trigger.
In autosleep_wq, try_to_suspend function will try to enter suspend
mode in specific period. it will get wakeup_count then call pm_notifier
chain callback function and freeze processes.
Heartbeat_pm_notifier is called and it call led_trigger_unregister to
change the trigger of led device to none. It will send uevent message
and the wakeup source count changed. As wakeup_count changed, suspend
will abort.
Fixes: 5ab92a7cb8 ("leds: handle suspend/resume in heartbeat trigger")
Signed-off-by: Zhang Bo <bo.zhang@nxp.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Each nibble represents 4 LEDs, and in case of the higher register, bit 0
represents LED 4, so we need to use modulus for the LED number as well.
Fixes: fd7b025a23 ("leds: add BCM6328 LED driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
- fix rx packet counters for local ARP replies, by Sven Eckelmann
- fix memory leaks for unicast packetes received from another gateway
in bridge loop avoidance, by Andreas Pape
-----BEGIN PGP SIGNATURE-----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=AbYj
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20170613' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are two batman-adv bugfixes:
- fix rx packet counters for local ARP replies, by Sven Eckelmann
- fix memory leaks for unicast packetes received from another gateway
in bridge loop avoidance, by Andreas Pape
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* Avi fixes some fallout from my mac80211 RX flags changes
* Emmanuel fixes an issue with adhering to the spec, and
an oversight in the SMPS management code
* Jason's patch makes mac80211 use constant-time memory
comparisons for message authentication, to avoid having
potentially observable timing differences
* my fix makes mac80211 set the basic rates bitmap before
the channel so the next update to the driver has more
consistent data - this required another rework patch to
remove some useless 5/10 MHz code that can never be hit
-----BEGIN PGP SIGNATURE-----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=S5/1
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Some fixes:
* Avi fixes some fallout from my mac80211 RX flags changes
* Emmanuel fixes an issue with adhering to the spec, and
an oversight in the SMPS management code
* Jason's patch makes mac80211 use constant-time memory
comparisons for message authentication, to avoid having
potentially observable timing differences
* my fix makes mac80211 set the basic rates bitmap before
the channel so the next update to the driver has more
consistent data - this required another rework patch to
remove some useless 5/10 MHz code that can never be hit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when dumping a context data only word number '1' is read for the
entire context.
Fixes: c965db4446 ("qed: Add support for debug data collection")
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new Sierra Wireless EM7305 device ID used in a Toshiba laptop,
and two Longcheer device IDs entries used by Telewell TW-3G HSPA+
branded modems.
Reported-by: Petr Kloc <petr_kloc@yahoo.com>
Reported-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 90eff9096c ("net: phy: Allow splitting MDIO
bus/device support from PHYs") we could create a configuration where
MDIO_DEVICE=y and PHYLIB=m which leads to the following undefined
references:
drivers/built-in.o: In function `thunder_mdiobus_pci_remove':
>> mdio-thunder.c:(.text+0x2a212f): undefined reference to
>> `mdiobus_unregister'
>> mdio-thunder.c:(.text+0x2a2138): undefined reference to
>> `mdiobus_free'
drivers/built-in.o: In function `thunder_mdiobus_pci_probe':
mdio-thunder.c:(.text+0x2a22e7): undefined reference to
`devm_mdiobus_alloc_size'
mdio-thunder.c:(.text+0x2a236f): undefined reference to
`of_mdiobus_register'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 90eff9096c ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's already added by pr_fmt so remove the explicit use.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
