Most uses of bch2_dev_bkey_exists() are going away, where we assume that
because a key references a device the device most exist - instead, we'll
be explicitly checking if the device exists and getting a reference to
it.
This adds the new helpers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Eliminating bch2_dev_bkey_exists() uses and replacing them with proper
checks; this one was unnecessary since the caller already has it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we block on the allocator for more than 10 seconds, print out some
useful debugging info.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new variant of closure_sync_timeout() that takes a timeout.
Note that when this returns -ETIME the closure will still be waiting on
something, i.e. it's not safe to return if you've got a stack allocated
closure.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't strictly guarantee that no pointers refer to nonexistent
devices - we attempt to, but we need to be safe when the filesystem is
corrupt.
Therefore, change device_add to try to pick a slot that's never been
used, or the slot that's been unused the longest.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now explicitly allocate and free the buckets_nouse bitmap - this is
going to be used for online fsck.
To go RW when we haven't check allocations, we'll do a much slimmed down
version that just initializes the buckets_nouse bitmaps.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It should be FS_IOC32_GETFLAGS instead of FS_IOC_GETFLAGS in
compat ioctl.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In bch2_link_trans(), if bch2_inode_nlink_inc() fails, it needs to
call bch2_trans_iter_exit() in the error path.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The vfs[1] documentation describes free_inode as follows:
```
free_inode
this method is called from RCU callback. If you use call_rcu()
in ->destroy_inode to free ‘struct inode’ memory, then it’s
better to release memory in this method.
```
free_inode will be called by the RCU callback, so it might be better
to move the inode free operation to destroy_inode.
Similar to commit ae6b47b565 ("fs/ntfs3: Change destroy_inode to
free_inode").
Link:
[1]: https://www.kernel.org/doc/html/latest/filesystems/vfs.html
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On recovery from clean shutdown we don't typically read the journal, but
we still want to avoid overwriting existing entries in the journal for
list_journal debugging.
Thus, add some fields to the member info section so we can remember
where we left off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When compiling the bcachefs-tools, the following compilation warning
is reported:
libbcachefs/snapshot.c: In function ‘bch2_reconstruct_snapshots’:
libbcachefs/snapshot.c:915:19: warning: ‘tree_id’ may be used uninitialized in this function [-Wmaybe-uninitialized]
915 | snapshot->v.tree = cpu_to_le32(tree_id);
libbcachefs/snapshot.c:903:6: note: ‘tree_id’ was declared here
903 | u32 tree_id;
| ^~~~~~~
This is a false alert, because @tree_id is changed in
bch2_snapshot_tree_create after it returns 0. And if this function
returns other value, @tree_id wouldn't be used. Thus there should
be nothing wrong in logical.
Although the report itself is a false alert, we can still make it more
explicit by setting the initial value of @tree_id to 0 (an invalid
tree ID).
Fixes: a292be3b68 ("bcachefs: Reconstruct missing snapshot nodes")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When building for a 32-bit target, for which 'size_t' is 'unsigned int',
there are two warnings around mismatched format specifiers and argument
types:
In file included from fs/bcachefs/vstructs.h:5,
from fs/bcachefs/bcachefs_format.h:79,
from fs/bcachefs/bcachefs.h:207,
from fs/bcachefs/btree_key_cache.c:3:
fs/bcachefs/btree_key_cache.c: In function 'bch2_btree_key_cache_to_text':
fs/bcachefs/btree_key_cache.c:1046:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
1046 | prt_printf(out, "nonpcpu freelist:\t%lu\r\n", bc->nr_freed_nonpcpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
| |
| size_t {aka unsigned int}
fs/bcachefs/util.h:192:63: note: in definition of macro 'prt_printf'
192 | #define prt_printf(_out, ...) bch2_prt_printf(_out, __VA_ARGS__)
| ^~~~~~~~~~~
fs/bcachefs/btree_key_cache.c:1046:47: note: format string is defined here
1046 | prt_printf(out, "nonpcpu freelist:\t%lu\r\n", bc->nr_freed_nonpcpu);
| ~~^
| |
| long unsigned int
| %u
fs/bcachefs/btree_key_cache.c:1047:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
1047 | prt_printf(out, "pcpu freelist:\t%lu\r\n", bc->nr_freed_pcpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~
| |
| size_t {aka unsigned int}
fs/bcachefs/util.h:192:63: note: in definition of macro 'prt_printf'
192 | #define prt_printf(_out, ...) bch2_prt_printf(_out, __VA_ARGS__)
| ^~~~~~~~~~~
fs/bcachefs/btree_key_cache.c:1047:44: note: format string is defined here
1047 | prt_printf(out, "pcpu freelist:\t%lu\r\n", bc->nr_freed_pcpu);
| ~~^
| |
| long unsigned int
| %u
cc1: all warnings being treated as error
Use the proper 'size_t' specifier, '%zu', to clear up the warnings for
these platforms.
Fixes: f2d47ec26af5 ("bcachefs: Btree key cache instrumentation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When building with clang's -Wincompatible-function-pointer-types-strict
(a warning designed to catch potential kCFI failures at build time),
there are several warnings along the lines of:
fs/bcachefs/bkey_methods.c:118:2: error: incompatible function pointer types initializing 'int (*)(struct btree_trans *, enum btree_id, unsigned int, struct bkey_s_c, struct bkey_s, enum btree_iter_update_trigger_flags)' with an expression of type 'int (struct btree_trans *, enum btree_id, unsigned int, struct bkey_s_c, struct bkey_s, unsigned int)' [-Werror,-Wincompatible-function-pointer-types-strict]
118 | BCH_BKEY_TYPES()
| ^~~~~~~~~~~~~~~~
fs/bcachefs/bcachefs_format.h:394:2: note: expanded from macro 'BCH_BKEY_TYPES'
394 | x(inode, 8) \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
fs/bcachefs/bkey_methods.c:117:41: note: expanded from macro 'x'
117 | #define x(name, nr) [KEY_TYPE_##name] = bch2_bkey_ops_##name,
| ^~~~~~~~~~~~~~~~~~~~
<scratch space>:277:1: note: expanded from here
277 | bch2_bkey_ops_inode
| ^~~~~~~~~~~~~~~~~~~
fs/bcachefs/inode.h:26:13: note: expanded from macro 'bch2_bkey_ops_inode'
26 | .trigger = bch2_trigger_inode, \
| ^~~~~~~~~~~~~~~~~~
There are several functions that did not have their flags parameter
converted to 'enum btree_iter_update_trigger_flags' in the recent
unification, which will cause kCFI failures at runtime because the
types, while ABI compatible (hence no warning from the non-strict
version of this warning), do not match exactly.
Fix up these functions (as well as a few other obvious functions that
should have it, even if there are no warnings currently) to resolve the
warnings and potential kCFI runtime failures.
Fixes: 31e4ef3280c8 ("bcachefs: iter/update/trigger/str_hash flag cleanup")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This unifies the online and offline btree gc passes; we're not yet
running it online.
We now iterate over one level of the btree at a time - the same as
check_extents_to_backpointers(); this ordering preserves order of keys
regardless of btree splits and merges, which will be important when we
re-enable online gc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Currently, the reflink_p gc trigger does repair as well - turning a
reflink_p key into an error key if the reflink_v it points to doesn't
exist.
This won't work with online check/repair, because the repair path once
online will be subject to transaction restarts, but BTREE_TRIGGER_gc is
not idempotant - we can't run it multiple times if we get a transaction
restart.
So we need to split these paths; to do so this patch calls
check_fix_ptrs() by a new general path - a new trigger type,
BTREE_TRIGGER_check_repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
looping when we change a bucket gen is not ideal - it means we risk
failing if we'd go into an infinite loop, and it's better to make
forward progress even if fsck doesn't fix everything.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we hit an inconsistency when updating allocation information, we
don't want to fail the update if it's for a deletion - only if it's for
a new key.
Rename check_bucket_ref() -> bucket_ref_update() so we can centralize
the logic to do this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This eliminates some duplicated logic, and the gc path now handles
stripe updates and deletions - we need this since soon we're bringing
back runtime gc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Start to work on unifying mark_stripe_bucket() and
trans_mark_stripe_bucket(); first, clean up all the unnecessary and
gratuitious differences.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're working on potentially unifying bch2_check_bucket_ref() and
bch2_check_fix_ptrs() - or at least eliminating gratuitious differences.
Most immediately, there's a bunch of cleanups to be done regarding
BCH_DATA_stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's no need to be using new_inode(); we can skip all that
indirection and make the code easier to follow.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since btree_ptr_v2, we no longer require the journal seq blacklist table
for skipping blacklisted bsets (btree node entries); the pointer to a
given node indicates how much data is present.
Therefore there's no longer any need for journal seq blacklist gc to
walk the btree - we can prune entries older than journal last_seq.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>