Create devices for each USB4 port. This is needed when we add retimer
access when there is no device connected but may be useful for other
purposes too following what USB subsystem does. This exports a single
attribute "link" that shows the type of the USB4 link (or "none" if
there is no cable connected).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The upstream port can be connected to any previous generation
Thunderbolt port so logging as "TBT" is more accurate than "TBT3.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Goshen Ridge reports wrong DP main credits in NVM 27 and earlier,
so add a quirk that fixes it. We also need to expand the quirk table to
match on hardware vendor/device IDs too.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The USB4 Connection Manager guide provides detailed information how the
USB4 router buffer (credit) allocation information should be used by the
connection manager when it allocates buffers for different paths. This
patch implements it for Linux. For USB 3.x and DisplayPort we use
directly the router preferences. The rest of the buffer space is then
used for PCIe and DMA (peer-to-peer, XDomain) traffic. DMA tunnels
require at least one buffer and PCIe six, so if there is not enough
buffers we fail the tunnel creation.
For the legacy Thunderbolt 1-3 devices we use the existing hard-coded
scheme except for DMA where we use the values suggested by the USB4 spec
chapter 13.
Co-developed-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Once lane bonding has been enabled (or disabled) both lane adapters may
update their total credits accordingly. For this reason re-read the port
credits after lane bonding has been enabled or disabled.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
USB4 routers must expose their preferred credit (buffer) allocation
information through router operation. This information tells the
connection manager how the router prefers its buffers to be allocated to
get the expected bandwidth for the supported protocols.
Read this information and store it as part of struct tb_switch for each
USB4 router.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It may take some time until the two lanes enter bonded state so poll for
the link width to match what is expected before going forward. This ensures
the link is in expected state before we start establishing paths through
it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
With the USB4 buffer allocation the number of credits (and non-flow
credits) may be different depending on the router buffer allocation
preferences. To allow this move the nfc_credits field to struct
tb_path_hop.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The function does not modify the object in any way so make the parameter
const to reflect this.
No functional changes intended.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The USB4 Configuration Manager guide suggests that the USB4 port wakes
are configured in a certain way, like that when the port is configured
the wake-on-connect should not be set and so forth, so align the driver
with this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Latest USB4 spec added a new wake bit for DisplayPort so add this to the
driver when runtime suspending. This way wake up the domain when a new
monitor is plugged in to any of the device routers.
Also do the same for pre-USB4 devices through the link controller
registers as documented in chapter 13 of the USB4 spec.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Align the "What" entries along with the rest and move
nvm_authenticate_on_disconnect to correct place.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Now that we have generic functionality available in nvm.c make the DMA
port code call it instead of duplicating the functionality.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We do this for Thunderbolt 2/3 devices through DMA port, USB4 devices
and retimers pretty much the same way. Only the actual block read/write
is different. For this reason split out the NVM read/write functions
from usb4.c to nvm.c and make USB4 device code call these when needed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add new device known to support self-authenticate on disconnect.
Signed-off-by: Crag Wang <crag.wang@dell.com>
Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
- Fix addfd notification race condition (Sargun Dhillon)
-----BEGIN PGP SIGNATURE-----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=c9Hd
-----END PGP SIGNATURE-----
Merge tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a hard-to-hit race condition in the addfd user_notif
feature of seccomp, visible since v5.9.
And a small documentation fix"
* tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Refactor notification handler to prepare for new semantics
Documentation: seccomp: Fix user notification documentation
I have a handful of RISC-V related fixes:
* A fix to avoid errors when the stack tracing code is tracing itself.
* A fix to resurrect the memtest= kernel command line argument on
RISC-V, which was briefly enabled during the merge window before a
refactoring disabled it.
* A build fix and some warning cleanups.
-----BEGIN PGP SIGNATURE-----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=Pg04
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of RISC-V related fixes:
- avoid errors when the stack tracing code is tracing itself.
- resurrect the memtest= kernel command line argument on RISC-V,
which was briefly enabled during the merge window before a
refactoring disabled it.
- build fix and some warning cleanups"
* tag 'riscv-for-linus-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Fix W=1 build warnings
riscv: kprobes: Fix build error when MMU=n
riscv: Select ARCH_USE_MEMTEST
riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled
- Fix a bug where unmapping operations end earlier than expected, which
can cause chaos on multi-block directory and symlink shrink
operations.
- Fix an erroneous assert that can trigger if we try to transition a
bmap structure from btree format to extents format with zero extents.
This was exposed by xfs/538.
-----BEGIN PGP SIGNATURE-----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=y7+K
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This week's pile mitigates some decades-old problems in how extent
size hints interact with realtime volumes, fixes some failures in
online shrink, and fixes a problem where directory and symlink
shrinking on extremely fragmented filesystems could fail.
The most user-notable change here is to point users at our (new) IRC
channel on OFTC. Freedom isn't free, it costs folks like you and me;
and if you don't kowtow, they'll expel everyone and take over your
channel. (Ok, ok, that didn't fit the song lyrics...)
Summary:
- Fix a bug where unmapping operations end earlier than expected,
which can cause chaos on multi-block directory and symlink shrink
operations.
- Fix an erroneous assert that can trigger if we try to transition a
bmap structure from btree format to extents format with zero
extents. This was exposed by xfs/538"
* tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: bunmapi has unnecessary AG lock ordering issues
xfs: btree format inode forks can have zero extents
xfs: add new IRC channel to MAINTAINERS
xfs: validate extsz hints against rt extent size when rtinherit is set
xfs: standardize extent size hint validation
xfs: check free AG space when making per-AG reservations
This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.
Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].
[1]: https://lore.kernel.org/lkml/20210413160151.3301-1-rodrigo@kinvolk.io/
Fixes: 7cf97b1254 ("seccomp: Introduce addfd ioctl to seccomp user notifier")
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Rodrigo Campos <rodrigo@kinvolk.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-3-sargun@sargun.me
Here are some tiny char/misc driver fixes for 5.13-rc4.
Nothing huge here, just some tiny fixes for reported issues:
- 2 interconnect driver fixes
- kgdb build warning fix for gcc-11
- hgafb regression fix
- soundwire driver fix
- mei driver fix
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYLJIxQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykGCgCfX/NsOhFfGDwuLB1cdvCbz7yAy0wAn2RkpPEd
rvLlnmp4+mAxDXmBsAqP
=cgtc
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some tiny char/misc driver fixes for 5.13-rc4.
Nothing huge here, just some tiny fixes for reported issues:
- two interconnect driver fixes
- kgdb build warning fix for gcc-11
- hgafb regression fix
- soundwire driver fix
- mei driver fix
All have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: request autosuspend after sending rx flow control
kgdb: fix gcc-11 warnings harder
video: hgafb: correctly handle card detect failure during probe
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()
Here are 3 small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- 2 device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYLJMrQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynf8ACgvsZCX7Wi3GYtFovfomHsCRKpZBsAn0sqfSAL
TXHePEnj2tJ5c22TSqSt
=Zx6Z
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- two device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: Reduce device link removal code duplication
drivers: base: Fix device link removal
debugfs: fix security_locked_down() call for SELinux
Here are some small IIO and staging driver fixes for reported issues for
5.13-rc4.
Nothing major here, tiny changes for reported problems, full details are
in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYLJNPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynsWgCggwpoOPGXwjV0qBf135hoAPUT6p8AoJOtfIuq
2VJMflDGHTd/B4p3iGsx
=1P6T
-----END PGP SIGNATURE-----
Merge tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
for 5.13-rc4.
Nothing major here, tiny changes for reported problems, full details
are in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: ad7793: Add missing error code in ad7793_setup()
iio: adc: ad7923: Fix undersized rx buffer.
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
iio: dac: ad5770r: Put fwnode in error case during ->probe()
iio: gyro: fxas21002c: balance runtime power in error path
staging: emxx_udc: fix loop in _nbu2ss_nuke()
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7192: handle regulator voltage error first
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than
the original issue
All but the last patch have been in linux-next for a while, the last one
is a revert of a problem found in linux-next with the 8250_omap driver
change.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYLJODQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yna7gCgmKIssymva29JpQb54HuzRooD8jcAn3XeMVWI
E4TQzaTFC1mNAQy8GU4F
=cLjq
-----END PGP SIGNATURE-----
Merge tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
Here are a number of tiny USB and Thunderbolt driver fixes for 5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYLJOvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoGACg1Fu7eGouMBaHMykdR04lHgixb20An2Pna0fu
MPOqJSrKIF4/D6rUcsep
=wA32
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
xhci: fix giving back URB with incorrect status regression in 5.12
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
usb: typec: tcpm: Respond Not_Supported if no snk_vdo
usb: typec: tcpm: Properly interrupt VDM AMS
USB: trancevibrator: fix control-request direction
usb: Restore the usb_header label
usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear pending after acking connector change
usb: typec: mux: Fix matching with typec_altmode_desc
misc/uss720: fix memory leak in uss720_probe
usb: dwc3: gadget: Properly track pending and queued SG
USB: usbfs: Don't WARN about excessively large memory allocations
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
usb: chipidea: udc: assign interrupt number to USB gadget structure
usb: cdnsp: Fix lack of removing request from pending list.
usb: cdns3: Fix runtime PM imbalance on error
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
...
* Another state update on exit to userspace fix
* Prevent the creation of mixed 32/64 VMs
* Fix regression with irqbypass not restarting the guest on failed connect
* Fix regression with debug register decoding resulting in overlapping access
* Commit exception state on exit to usrspace
* Fix the MMU notifier return values
* Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
* fix guest missed wakeup with assigned devices
* fix WARN reported by syzkaller
* do not use BIT() in UAPI headers
* make the kvm_amd.avic parameter bool
PPC fixes:
* make halt polling heuristics consistent with other architectures
selftests:
* various fixes
* new performance selftest memslot_perf_test
* test UFFD minor faults in demand_paging_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCyF0MUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOHSgf/Q4Hm5e12Bj2xJy6A+iShnrbbT8PW
hcIIOA7zGWXfjVYcBV7anbj7CcpzfIz0otcRBABa5mkhj+fb3YmPEb0EzCPi4Hru
zxpcpB2w7W7WtUOIKe2EmaT+4Pk6/iLcfr8UMHMqx460akE9OmIg10QNWai3My/3
RIOeakSckBI9e/1TQZbxH66dsLwCT0lLco7i7AWHdFxkzUQyoA34HX5pczOCBsO5
3nXH+/txnRVhqlcyzWLVVGVzFqmpHtBqkIInDOXfUqIoxo/gOhOgF1QdMUEKomxn
5ZFXlL5IXNtr+7yiI67iHX7CWkGZE9oJ04TgPHn6LR6wRnVvc3JInzcB5Q==
=ollO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmCyA4sACgkQjYWKoQLX
FBjddQf+MWC5uLlKarG4BUb38iH/iCMEw3+euYiUIMrGNskjXPUbA+8u7XVVG/iY
DccOtnUj70qKIYSCC37IItL45Xe6+oDU2cSoL1gsNLPgsgW2Y9W4opu6+WtS0i8B
fXi/l25zefZbHLa9WM5GcXfBILSQOjVBS59zxA+jeN3Ap8gHwJsuwRXBM2xeDbP4
CloRS/6Q/0tgBp1uMCfKFAO60UzwnyeR7ULrEpjk3f++maUKEIO2GnpFK5ly3kD/
PcTqsljspjKeD4879n0XNBd4+zcUMQjw02Afnts0FZaypuScWJSesQ6NWuAIJ57v
glp7IBlino2U4kcvuyAa5BK3ZRZPyA==
=Dp3D
-----END PGP SIGNATURE-----
Merge tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"
* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
10 small fixes, all in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYLF1vSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSaWAP94iRVJ
DUTEuUl8RCvwyBqW/K0wF2AfE96z5arYYYNfjwD/Y3Zcf5iGyVTmGXH9SgM0jQTs
qXFcjrsqhZLzA6R50QU=
=UNqY
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: vmw_pvscsi: Set correct residual data length
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: aic7xxx: Remove multiple definition of globals
scsi: aic7xxx: Restore several defines for aic7xxx firmware build
scsi: target: iblock: Fix smp_processor_id() BUG messages
scsi: libsas: Use _safe() loop in sas_resume_port()
scsi: target: tcmu: Fix xarray RCU warning
scsi: target: core: Avoid smp_processor_id() in preemptible code
-----BEGIN PGP SIGNATURE-----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=dfLl
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few minor fixes:
- Fix an issue with hashed wait removal on exit (Zqiang, Pavel)
- Fix a recent data race introduced in this series (Marco)"
* tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
io_uring: fix data race to avoid potential NULL-deref
io-wq: Fix UAF when wakeup wqe in hash waitqueue
io_uring/io-wq: close io-wq full-stop gap
- Fix error checking of BPF prog attachment in 'perf stat'.
- Fix getting maximum number of fds in the vendor events JSON parser.
- Move debug initialization earlier, fixing a segfault in some cases.
- Fix eventcode of power10 JSON events.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYLFRCQAKCRCyPKLppCJ+
JzhmAQCY5szt0eyPpkDVn0c4vP26E1w/pP0EpYWhqhjilP6NFQEAxoQuhwxwzyjv
bdWgAyjKJ6Qt1jYKUK+A0nSyYNW4UAI=
=kN6V
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix error checking of BPF prog attachment in 'perf stat'.
- Fix getting maximum number of fds in the vendor events JSON parser.
- Move debug initialization earlier, fixing a segfault in some cases.
- Fix eventcode of power10 JSON events.
* tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events powerpc: Fix eventcode of power10 JSON events
perf stat: Fix error check for bpf_program__attach
perf debug: Move debug initialization earlier
perf jevents: Fix getting maximum number of fds
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmCxbv4ACgkQiiy9cAdy
T1GkPwwAqq0tvNDZnQ6aAur1jwHMiOIAydvpgNKXlKkiXYu+qQbMRgOdUsOtjM00
Idi8PHKkID2X63HeiwLwoQTfTXGcs6I4UM1iOslEs2ZaX+Fkgo5PG25lIFRTAsqR
tqYGqGi6yL6TWE7PlVJxr3QuwGeMr7B8X9A0lTZ7YJwslhByK8ymasPdF+jSgPQI
zDOuAeXiYvlph8sCftWX7gF34aBfKgiH8LhA6M2SY5S16g7LwtXUJjq1PJactoD3
+nEPyCtRoN6ohScKNVnM8JDpOKIrM+mJ42RG28ZLo6//8so0SFcUdC8VhECBxOWL
9WkoL2GxRV0LoRnzCZS30EpAi/eQU+QlTrPueGp+n8GjauJMDPoxJ2l6UXox6CLm
8CqwxKATG6WbrdcGhaVbIxVbAWC7Ze271C/7L61R5K+RmDTXc6jI4vAIw1Pib4o+
CG6XtxHya5PM0zvyLgU28M6aY+WExbwnkSQKvI2FJZkOVG0xdFCy2O1QLLRBChmn
a6hsA05a
=8nZ2
-----END PGP SIGNATURE-----
Merge tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three SMB3 fixes.
Two for stable, and the other fixes a problem pointed out with a
recently added ioctl"
* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
cifs: fix string declarations and assignments in tracepoints
cifs: set server->cipher_type to AES-128-CCM for SMB3.0
Highlights include:
Stable fixes
- Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
- Fix Oops in xs_tcp_send_request() when transport is disconnected
- Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Bugfixes
- Fix instances where signal_pending() should be fatal_signal_pending()
- fix an incorrect limit in filelayout_decode_layout()
- Fixes for the SUNRPC backlogged RPC queue
- Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
- Revert commit 586a0787ce ("Clean up rpcrdma_prepare_readch()")
-----BEGIN PGP SIGNATURE-----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=66ks
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
- Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
- Fix Oops in xs_tcp_send_request() when transport is disconnected
- Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Bugfixes:
- Fix instances where signal_pending() should be fatal_signal_pending()
- fix an incorrect limit in filelayout_decode_layout()
- Fixes for the SUNRPC backlogged RPC queue
- Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
- Revert commit 586a0787ce ("Clean up rpcrdma_prepare_readch()")"
* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Remove trailing semicolon in macros
xprtrdma: Revert 586a0787ce
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
NFS: Clean up reset of the mirror accounting variables
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
SUNRPC: More fixes for backlog congestion
SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
SUNRPC in case of backlog, hand free slots directly to waiting task
pNFS/NFSv4: Remove redundant initialization of 'rd_size'
NFS: fix an incorrect limit in filelayout_decode_layout()
fs/nfs: Use fatal_signal_pending instead of signal_pending
A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions,
most of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio.
-----BEGIN PGP SIGNATURE-----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=AIkz
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions, most
of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio"
* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
ALSA: usb-audio: scarlett2: Improve driver startup messages
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
ALSA: usb-audio: fix control-request direction
ASoC: qcom: lpass-cpu: Use optional clk APIs
ASoC: cs35l33: fix an error code in probe()
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
ASoC: cs42l52: Minor tidy up of error paths
ASoC: cs35l32: Add missing regmap use_single config
ASoC: cs35l34: Add missing regmap use_single config
ASoC: cs42l73: Add missing regmap use_single config
ASoC: cs53l30: Add missing regmap use_single config
...
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
-----BEGIN PGP SIGNATURE-----
iQJCBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmCvdGkPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDyxYP90X4vSdDvewU+xtyD84g4UEyzAnHbjaSWL/i
59vXVqqLPhGkUillWCIdKGWz9q27Ixs1PyMrySIoM+U1hARLQ3MdE2nUBfKZRg9W
oLArFSPDYstyGpdG0B5YB8bXiF8ePXesWQ0lwx/02KGKNLo+t5FEeVVg7zf7eVkv
9dwItKtnmU8LiUhGtYrHuogDX9KRuuK7SH+ouF4kwf5FMy24k2IfZSUQP1Sj/hNC
oA9iqWCA6XgQkaVLnxqXmPpY6krUDgbQsFZK92XpQRngJa8FoFQr6EMgHBTrBIat
LKIIacqKXZQgRk9ala60Jyf4REYZ5600HzaIUhU4cI9EZA7R4zXy6mX+F/PU7b46
NQVXLNYxpzy7ETlzXUApoi8l88mKuR6sJgQrJku1TBu97778MMEjiuk5n51Pjj2F
p+bkRx2X5ctEIQx6RNTmVi4VIcF8+dbRqkgChDmaP/9CVXZGn8J6Wd8j28C7B+sJ
s3qFeWI/sYvGmf2cBuq6tYHVT9TnVu43Ypq2nhTzwGXdjhbFH1y/I2ZeVUGAvQdl
N1/Lg4QWjpm/UNBcFUVUr34rf5GnNgKPkT668Yt0bhsthVOE6YZrK7Szbc+ert+1
QkFWZuglLc014NegHyjUybooTykrvBhDzyTU9PhTQ5YU9hyq81eN+i+LgH+rPJjM
UmAVeCo=
=lGh1
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.13, take #2
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
ctxt->ud is consumed only by x86_decode_insn(), we can kill it off by
passing emulation_type to x86_decode_insn() and dropping ctxt->ud
altogether. Tracking that info in ctxt for literally one call is silly.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-2-git-send-email-wanpengli@tencent.com>
Reported by syzkaller:
WARNING: CPU: 7 PID: 10526 at linux/arch/x86/kvm//x86.c:7621 x86_emulate_instruction+0x41b/0x510 [kvm]
RIP: 0010:x86_emulate_instruction+0x41b/0x510 [kvm]
Call Trace:
kvm_mmu_page_fault+0x126/0x8f0 [kvm]
vmx_handle_exit+0x11e/0x680 [kvm_intel]
vcpu_enter_guest+0xd95/0x1b40 [kvm]
kvm_arch_vcpu_ioctl_run+0x377/0x6a0 [kvm]
kvm_vcpu_ioctl+0x389/0x630 [kvm]
__x64_sys_ioctl+0x8e/0xd0
do_syscall_64+0x3c/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Commit 4a1e10d5b5 ("KVM: x86: handle hardware breakpoints during emulation())
adds hardware breakpoints check before emulation the instruction and parts of
emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag
here and the emulation context will not be reused. Commit c8848cee74 ("KVM: x86:
set ctxt->have_exception in x86_decode_insn()) triggers the warning because it
catches the stale emulation context has #UD, however, it is not during instruction
decoding which should result in EMULATION_FAILED. This patch fixes it by moving
the second part emulation context initialization into init_emulate_ctxt() and
before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up
patch.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=134683fdd00000
Reported-by: syzbot+71271244f206d17f6441@syzkaller.appspotmail.com
Fixes: 4a1e10d5b5 (KVM: x86: handle hardware breakpoints during emulation)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-1-git-send-email-wanpengli@tencent.com>
The kvm_get_linear_rip() handles x86/long mode cases well and has
better readability, __kvm_set_rflags() also use the paired
function kvm_is_linear_rip() to check the vcpu->arch.singlestep_rip
set in kvm_arch_vcpu_ioctl_set_guest_debug(), so change the
"CS.BASE + RIP" code in kvm_arch_vcpu_ioctl_set_guest_debug() and
handle_exception_nmi() to this one.
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20210526063828.1173-1-yuan.yao@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation had some previously incorrect information about how
userspace notifications (and responses) were handled due to a change
from a previously proposed patchset.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-2-sargun@sargun.me
Commit 5a517b5bf6 ("i2c: designware: Get rid of legacy platform data")
removes ./include/linux/platform_data/i2c-designware.h, but misses to
adjust the SYNOPSYS DESIGNWARE I2C DRIVER section in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: include/linux/platform_data/i2c-designware.h
Remove the file entry to this removed file as well.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixed the eventcode values in the power10 JSON event files to prepend
"0x" since these are hexadecimal values.
The patch also changes the event description of the PM_EXEC_STALL_LOAD_FINISH
and PM_EXEC_STALL_NTC_FLUSH event and move some events to correct files.
Fixes: 32daa5d789 ("perf vendor events: Initial JSON/events list for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Paul A. Clarke <pc@us.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20210525063723.1191514-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit 31fae7c8b1.
Tony writes:
I just noticed this causes the following regression in Linux
next when pressing a key on uart console after boot at least on
omap3. This seems to happen on serial_port_in(port, UART_RX) in
the quirk handling.
So let's drop this.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YLCCJzkkB4N7LTQS@atomide.com
Fixes: 31fae7c8b1 ("serial: 8250: 8250_omap: Fix possible interrupt storm")
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
2. Condition !is_lastmsg(i2c), taking true branch.
} else if (!is_lastmsg(i2c)) {
3. Condition i2c->msg->flags & 1, taking true branch.
if (i2c->msg->flags & I2C_M_RD) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
