Commit Graph

62875 Commits

Author SHA1 Message Date
Eric Whitney
c8980e1980 ext4: disable dioread_nolock whenever delayed allocation is disabled
The patch "ext4: make dioread_nolock the default" (244adf6426) causes
generic/422 to fail when run in kvm-xfstests' ext3conv test case.  This
applies both the dioread_nolock and nodelalloc mount options, a
combination not previously tested by kvm-xfstests.  The failure occurs
because the dioread_nolock code path splits a previously fallocated
multiblock extent into a series of single block extents when overwriting
a portion of that extent.  That causes allocation of an extent tree leaf
node and a reshuffling of extents.  Once writeback is completed, the
individual extents are recombined into a single extent, the extent is
moved again, and the leaf node is deleted.  The difference in block
utilization before and after writeback due to the leaf node triggers the
failure.

The original reason for this behavior was to avoid ENOSPC when handling
I/O completions during writeback in the dioread_nolock code paths when
delayed allocation is disabled.  It may no longer be necessary, because
code was added in the past to reserve extra space to solve this problem
when delayed allocation is enabled, and this code may also apply when
delayed allocation is disabled.  Until this can be verified, don't use
the dioread_nolock code paths if delayed allocation is disabled.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200319150028.24592-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-26 10:57:42 -04:00
Eric Sandeen
c96e2b8564 ext4: do not commit super on read-only bdev
Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...

To avoid this, commit the error info in the superblock only if the
block device is writable.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-26 10:56:53 -04:00
Jan Kara
d05466b27b ext4: avoid ENOSPC when avoiding to reuse recently deleted inodes
When ext4 is running on a filesystem without a journal, it tries not to
reuse recently deleted inodes to provide better chances for filesystem
recovery in case of crash. However this logic forbids reuse of freed
inodes for up to 5 minutes and especially for filesystems with smaller
number of inodes can lead to ENOSPC errors returned when allocating new
inodes.

Fix the problem by allowing to reuse recently deleted inode if there's
no other inode free in the scanned range.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200318121317.31941-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-26 10:55:00 -04:00
Ritesh Harjani
5e47868fb9 ext4: unregister sysfs path before destroying jbd2 journal
Call ext4_unregister_sysfs(), before destroying jbd2 journal,
since below might cause, NULL pointer dereference issue.
This got reported with LTP tests.

ext4_put_super() 		cat /sys/fs/ext4/loop2/journal_task
	| 				ext4_attr_show();
ext4_jbd2_journal_destroy();  			|
    	|				 journal_task_show()
	| 					|
	| 				task_pid_vnr(NULL);
sbi->s_journal = NULL;

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200318061301.4320-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-26 10:52:49 -04:00
Ritesh Harjani
f1eec3b0d0 ext4: check for non-zero journal inum in ext4_calculate_overhead
While calculating overhead for internal journal, also check
that j_inum shouldn't be 0. Otherwise we get below error with
xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal
and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G             L   --------- -t - 4.18.0-167.el8.ppc64le #1
NIP:  c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4
<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0
LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0
<...>
Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

Fixes: 3c816ded78 ("ext4: use journal inode to determine journal overhead")
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-26 10:52:45 -04:00
Eric Whitney
2971148d0f ext4: remove map_from_cluster from ext4_ext_map_blocks
We can use the variable allocated_clusters rather than map_from_clusters
to control reserved block/cluster accounting in ext4_ext_map_blocks.
This eliminates a variable and associated code and improves readability
a little.

Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200311205125.25061-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:14 -04:00
Eric Whitney
3499046134 ext4: clean up ext4_ext_insert_extent() call in ext4_ext_map_blocks()
Now that the eofblocks code has been removed, we don't need to assign
0 to err before calling ext4_ext_insert_extent() since it will assign
a return value to ret anyway.  The variable free_on_err can be
eliminated and replaced by a reference to allocated_clusters which
clearly conveys the idea that newly allocated blocks should be freed
when recovering from an extent insertion failure.  The error handling
code itself should be restructured so that it errors out immediately on
an insertion failure in the case where no new blocks have been allocated
(bigalloc) rather than proceeding further into the mapping code.  The
initializer for fb_flags can also be rearranged for improved
readability.  Finally, insert a missing space in nearby code.

No known bugs are addressed by this patch - it's simply a cleanup.

Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200311205033.25013-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:13 -04:00
Dmitry Monakhov
eb5760863f ext4: mark block bitmap corrupted when found instead of BUGON
We already has similar code in ext4_mb_complex_scan_group(), but
ext4_mb_simple_scan_group() still affected.

Other reports: https://www.spinics.net/lists/linux-ext4/msg60231.html

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20200310150156.641-1-dmonakhov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:13 -04:00
Gustavo A. R. Silva
47b1030612 ext4: use flexible-array member for xattr structs
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200309180813.GA3347@embeddedor
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:13 -04:00
Gustavo A. R. Silva
e32ac2459c ext4: use flexible-array member in struct fname
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200309154838.GA31559@embeddedor
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:13 -04:00
Ritesh Harjani
d3b6f23f71 ext4: move ext4_fiemap to use iomap framework
This patch moves ext4_fiemap to use iomap framework.
For xattr a new 'ext4_iomap_xattr_ops' is added.

Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/b9f45c885814fcdd0631747ff0fe08886270828c.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:13 -04:00
Ritesh Harjani
b2c5764262 ext4: make ext4_ind_map_blocks work with fiemap
For indirect block mapping if the i_block > max supported block in inode
then ext4_ind_map_blocks() returns a -EIO error. But in case of fiemap
this could be a valid query to ->iomap_begin call.
So check if the offset >= s_bitmap_maxbytes in ext4_iomap_begin_report(),
then simply skip calling ext4_map_blocks().

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/87fa0ddc5967fa707656212a3b66a7233425325c.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:12 -04:00
Ritesh Harjani
ac58e4fb03 ext4: move ext4 bmap to use iomap infrastructure
ext4_iomap_begin is already implemented which provides ext4_map_blocks,
so just move the API from generic_block_bmap to iomap_bmap for iomap
conversion.

Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8bbd53bd719d5ccfecafcce93f2bf1d7955a44af.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:12 -04:00
Ritesh Harjani
2f424a5a09 ext4: optimize ext4_ext_precache for 0 depth
This patch avoids the memory alloc & free path when depth is 0,
since anyway there is no extra caching done in that case.
So on checking depth 0, simply return early.

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/93da0d0f073c73358e85bb9849d8a5378d1da539.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:12 -04:00
Ritesh Harjani
6386722a32 ext4: add IOMAP_F_MERGED for non-extent based mapping
IOMAP_F_MERGED needs to be set in case of non-extent based mapping.
This is needed in later patches for conversion of ext4_fiemap to use iomap.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/a4764c91c08c16d4d4a4b36defb2a08625b0e9b3.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-14 14:43:12 -04:00
Qiujun Huang
dce8e23710 ext4: fix a data race at inode->i_disksize
KCSAN find inode->i_disksize could be accessed concurrently.

BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end

write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:
 ext4_write_end+0x53f/0x5b0
 ext4_da_write_end+0x237/0x510
 generic_perform_write+0x1c4/0x2a0
 ext4_buffered_write_iter+0x13a/0x210
 ext4_file_write_iter+0xe2/0x9b0
 new_sync_write+0x29c/0x3a0
 __vfs_write+0x92/0xa0
 vfs_write+0xfc/0x2a0
 ksys_write+0xe8/0x140
 __x64_sys_write+0x4c/0x60
 do_syscall_64+0x8a/0x2a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:
 ext4_mark_iloc_dirty+0x716/0x1190
 ext4_mark_inode_dirty+0xc9/0x360
 ext4_convert_unwritten_extents+0x1bc/0x2a0
 ext4_convert_unwritten_io_end_vec+0xc5/0x150
 ext4_put_io_end+0x82/0x130
 ext4_writepages+0xae7/0x16f0
 do_writepages+0x64/0x120
 __writeback_single_inode+0x7d/0x650
 writeback_sb_inodes+0x3a4/0x860
 __writeback_inodes_wb+0xc4/0x150
 wb_writeback+0x43f/0x510
 wb_workfn+0x3b2/0x8a0
 process_one_work+0x39b/0x7e0
 worker_thread+0x88/0x650
 kthread+0x1d4/0x1f0
 ret_from_fork+0x35/0x40

The plain read is outside of inode->i_data_sem critical section
which results in a data race. Fix it by adding READ_ONCE().

Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 23:33:40 -05:00
Qian Cai
28936b62e7 ext4: fix a data race at inode->i_blocks
inode->i_blocks could be accessed concurrently as noticed by KCSAN,

 BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes

 write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118:
  inode_add_bytes+0x65/0xf0
  __inode_add_bytes at fs/stat.c:689
  (inlined by) inode_add_bytes at fs/stat.c:702
  ext4_mb_new_blocks+0x418/0xca0 [ext4]
  ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4]
  ext4_map_blocks+0x1a9/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block_unwritten+0x33/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  ext4_da_write_begin+0x35f/0x8f0 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65:
  ext4_do_update_inode+0x4a0/0xf60 [ext4]
  ext4_inode_blocks_set at fs/ext4/inode.c:4815
  ext4_mark_iloc_dirty+0xaf/0x160 [ext4]
  ext4_mark_inode_dirty+0x129/0x3e0 [ext4]
  ext4_convert_unwritten_extents+0x253/0x2d0 [ext4]
  ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4]
  ext4_end_io_rsv_work+0x22c/0x350 [ext4]
  process_one_work+0x54f/0xb90
  worker_thread+0x80/0x5f0
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 4 locks held by kworker/u256:0/8:
  #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90
  #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90
  #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4]
 irq event stamp: 3009267
 hardirqs last  enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4]

The plain read is outside of inode->i_lock critical section which
results in a data race. Fix it by adding READ_ONCE() there.

Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2020-03-05 23:32:26 -05:00
Eric Whitney
f064a9d6e7 ext4: clean up error return for convert_initialized_extent()
Although convert_initialized_extent() can potentially return an error
code with a negative value, its returned value is assigned to an
unsigned variable containing a block count in ext4_ext_map_blocks() and
then returned to that function's caller. The code currently works,
though the way this happens is obscure.  The code would be more
readable if it followed the error handling convention used elsewhere
in ext4_ext_map_blocks().

This patch does not address any known test failure or bug report - it's
simply a cleanup.  It also addresses a nearby coding standard issue.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200218202656.21561-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 20:27:59 -05:00
zhangyi (F)
780f66e592 jbd2: improve comments about freeing data buffers whose page mapping is NULL
Improve comments in jbd2_journal_commit_transaction() to describe why
we don't need to clear the buffer_mapped bit for freeing file mapping
buffers whose page mapping is NULL.

Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com
Fixes: c96dceeabf ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer")
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 20:25:05 -05:00
Gustavo A. R. Silva
6cfb061fe9 ext4: use flexible-array members in struct dx_node and struct dx_root
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200213160648.GA7054@embeddedor
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 20:25:05 -05:00
Madhuparna Bhowmik
92e9c58c56 ext4: use built-in RCU list checking in mballoc
list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200213152558.7070-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 20:24:50 -05:00
Eric Whitney
765bfcd59a ext4: delete declaration for ext4_split_extent()
There are no forward references for ext4_split_extent() in extents.c,
so delete its unnecessary declaration.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200212162141.22381-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 16:23:43 -05:00
Eric Whitney
4337ecd1fe ext4: remove EXT4_EOFBLOCKS_FL and associated code
The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file
contains unwritten blocks past i_size.  It's set when ext4_fallocate
is called with the KEEP_SIZE flag to extend a file with an unwritten
extent.  However, this flag hasn't been useful functionally since
March, 2012, when a decision was made to remove it from ext4.

All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version
1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag
handling") at that time.  Now that enough time has passed to make
e2fsprogs versions containing this modification common, this patch now
removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as
well.

This change has two implications.  First, because pre-1.42.2 e2fsck
versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and
because that bit will never be set by newer kernels containing this
patch, old versions of e2fsck won't have a compatibility problem with
files created by newer kernels.

Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits
belonging to a file written by an older kernel.  If set, it will remain
in that state until the file is deleted.  Because e2fsck versions since
1.42.2 don't check the flag at all, no adverse effect is expected.
However, pre-1.42.2 e2fsck versions that do check the flag may report
that it is set when it ought not to be after a file has been truncated
or had its unwritten blocks written.  In this case, the old version of
e2fsck will offer to clear the flag.  No adverse effect would then
occur whether the user chooses to clear the flag or not.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 15:55:30 -05:00
Chengguang Xu
a08fe66e4a ext4: code cleanup for ext4_statfs_project()
Calling min_not_zero() to simplify complicated prjquota
limit comparison in ext4_statfs_project().

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Link: https://lore.kernel.org/r/20200210082445.2379-1-cgxu519@mykernel.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 15:49:00 -05:00
Xiaoguang Wang
72f9da1d5c ext4: start to support iopoll method
Since commit "b1b4705d54ab ext4: introduce direct I/O read using
iomap infrastructure", we can easily make ext4 support iopoll
method, just use iomap_dio_iopoll().

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20200207120758.2411-1-xiaoguang.wang@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 15:40:15 -05:00
Harshad Shirwadkar
f2eeca099b ext4: force buffer up-to-date while marking it dirty
Writeback errors can leave buffer in not up-to-date state when there
are errors during background writes. Force buffer up-to-date while
marking it dirty.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20191224190940.157952-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05 15:35:39 -05:00
Linus Torvalds
e70869821a Two more bug fixes (including a regression) for 5.6
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl5cMPoACgkQ8vlZVpUN
 gaNYmgf/WX4/jMSYQu2fICudCqLr5fkLqsybvYGZGei3F8BaJ90zohQAQybNznWS
 iyF0JzrOp37b/o0haz7KfDr7xVB3lAVsKu9Bglq+zL8mc9IkPmjhCXuLbknUtOUw
 j3aVdntt4d6S3szbtP4PIZxNqh+/4KJDS2soWvuNWRpYMOv2yoMClptWWQtsimAt
 3fYpxasSz0Jrhtbuf+I1oID++wOycDT3RKiko5tpLlQiFVoKBzfou+0ZdkC4+UIl
 KvcpMBm1ijdGAaN9jfb2L2KCY5UdSvmeVui3sMXtHBEpKMJl2QsClylR1wGfgBKi
 +YMEsjBONxKo3kH2DaPJaU6LEm8JuQ==
 =rszH
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Two more bug fixes (including a regression) for 5.6"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
  jbd2: fix data races at struct journal_head
2020-03-01 16:35:08 -06:00
Dan Carpenter
37b0b6b8b9 ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728b9 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-29 17:48:08 -05:00
Qian Cai
6c5d911249 jbd2: fix data races at struct journal_head
journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-29 13:40:02 -05:00
Linus Torvalds
74dea5d99d io_uring-5.6-2020-02-28
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl5ZXkgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgprZqEACOvhiprH9Q75Pp+ZwQknM3xGyJRWI3Mbj9
 ZOyTVTK0qhTeaq6rN4MLSYevXOh+L68x5WRt1YJ1UnQRE0i8+ZQyZczqLKxxl8gF
 trhbYDXjvXIWr9zvdtiL01PKKu4Vjjp6eZAomrbxCTFku0qn76fo9wDgGPRGL+Kx
 lNO/6QvCXr9EjDniEUhlQsxTad5xc4sL0cnL4s2i7RlTCYtW4WJXJMC/4Gkg69j+
 W5GBZyjJDa8Sj3pEbLjtDtA4ooE9VMaldb7ZvR62ONUVwGpftPsbN7UhVlhyhpW+
 8v4ZEf07CxB246+hj7oL0RvEW3+/nB2hym1ySMXyBzpbx4O1JOUG7hQtNgdLRbCZ
 27IOg2O36qbUKM1hUwn7Qm3XAfBPQdFpVmqE2+E9MEOKzigLzhRP6Bu5d9x9VQGh
 JDxsm3B8PRHFJVAasiYu0p7mlx/+BCLjB84UrMB3I9UCBuVfk4mtmuwZX+mcK2PR
 pV1xJlEMYKme3cz2/u6uB8p3Nq6ipE1nSVrI6AnfEvJbQ9sFL61KaG4wHKPvtb0y
 mlNgc4seSjiWcBR2/84561a4CSmlXAn9dWMIGdHFFA43mTPYGc5omTcM8FwcEDkW
 cTFGB8sFukcTNmOw62HUHYI1vPpowX6apV08lEQrScz7GiK5piTYqTFNneqEzcwZ
 3bIMisH3Gg==
 =WheR
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Fix for a race with IOPOLL used with SQPOLL (Xiaoguang)

 - Only show ->fdinfo if procfs is enabled (Tobias)

 - Fix for a chain with multiple personalities in the SQEs

 - Fix for a missing free of personality idr on exit

 - Removal of the spin-for-work optimization

 - Fix for next work lookup on request completion

 - Fix for non-vec read/write result progation in case of links

 - Fix for a fileset references on switch

 - Fix for a recvmsg/sendmsg 32-bit compatability mode

* tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  io_uring: fix 32-bit compatability with sendmsg/recvmsg
  io_uring: define and set show_fdinfo only if procfs is enabled
  io_uring: drop file set ref put/get on switch
  io_uring: import_single_range() returns 0/-ERROR
  io_uring: pick up link work on submit reference drop
  io-wq: ensure work->task_pid is cleared on init
  io-wq: remove spin-for-work optimization
  io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL
  io_uring: fix personality idr leak
  io_uring: handle multiple personalities in link chains
2020-02-28 11:39:14 -08:00
Linus Torvalds
bfeb4f9977 zonefs fixes for 5.6-rc4
Two fixes in this pull request:
 * Revert the initial decision to silently ignore IOCB_NOWAIT for
   asynchronous direct IOs to sequential zone files. Instead, return an
   error to the user to signal that the feature is not supported (from
   Christoph)
 * A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures if
   no other file system already selected this option (from Johannes).
 
 Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCXljJWAAKCRDdoc3SxdoY
 dmztAP9Sj74cHVTxac+HoDKwf6DYWfjPWonT5tO4wc8q0PBDOgEAhKzHQJZNqJvd
 a0BrEf/t6RLWDgsi75cB/U6HsiGkiA0=
 =+maQ
 -----END PGP SIGNATURE-----

Merge tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

Pull zonefs fixes from Damien Le Moal:
 "Two fixes in here:

   - Revert the initial decision to silently ignore IOCB_NOWAIT for
     asynchronous direct IOs to sequential zone files. Instead, return
     an error to the user to signal that the feature is not supported
     (from Christoph)

   - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures
     if no other file system already selected this option (from
     Johannes)"

* tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: select FS_IOMAP
  zonefs: fix IOCB_NOWAIT handling
2020-02-28 08:34:47 -08:00
Jens Axboe
d876836204 io_uring: fix 32-bit compatability with sendmsg/recvmsg
We must set MSG_CMSG_COMPAT if we're in compatability mode, otherwise
the iovec import for these commands will not do the right thing and fail
the command with -EINVAL.

Found by running the test suite compiled as 32-bit.

Cc: stable@vger.kernel.org
Fixes: aa1fa28fc7 ("io_uring: add support for recvmsg()")
Fixes: 0fa03c624d ("io_uring: add support for sendmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-27 14:17:49 -07:00
Tobias Klauser
bebdb65e07 io_uring: define and set show_fdinfo only if procfs is enabled
Follow the pattern used with other *_show_fdinfo functions and only
define and use io_uring_show_fdinfo and its helper functions if
CONFIG_PROC_FS is set.

Fixes: 87ce955b24 ("io_uring: add ->show_fdinfo() for the io_uring file descriptor")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-27 06:56:21 -07:00
Jens Axboe
dd3db2a34c io_uring: drop file set ref put/get on switch
Dan reports that he triggered a warning on ring exit doing some testing:

percpu ref (io_file_data_ref_zero) <= 0 (0) after switching to atomic
WARNING: CPU: 3 PID: 0 at lib/percpu-refcount.c:160 percpu_ref_switch_to_atomic_rcu+0xe8/0xf0
Modules linked in:
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc3+ #5648
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:percpu_ref_switch_to_atomic_rcu+0xe8/0xf0
Code: e7 ff 55 e8 eb d2 80 3d bd 02 d2 00 00 75 8b 48 8b 55 d8 48 c7 c7 e8 70 e6 81 c6 05 a9 02 d2 00 01 48 8b 75 e8 e8 3a d0 c5 ff <0f> 0b e9 69 ff ff ff 90 55 48 89 fd 53 48 89 f3 48 83 ec 28 48 83
RSP: 0018:ffffc90000110ef8 EFLAGS: 00010292
RAX: 0000000000000045 RBX: 7fffffffffffffff RCX: 0000000000000000
RDX: 0000000000000045 RSI: ffffffff825be7a5 RDI: ffffffff825bc32c
RBP: ffff8881b75eac38 R08: 000000042364b941 R09: 0000000000000045
R10: ffffffff825beb40 R11: ffffffff825be78a R12: 0000607e46005aa0
R13: ffff888107dcdd00 R14: 0000000000000000 R15: 0000000000000009
FS:  0000000000000000(0000) GS:ffff8881b9d80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f49e6a5ea20 CR3: 00000001b747c004 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 rcu_core+0x1e4/0x4d0
 __do_softirq+0xdb/0x2f1
 irq_exit+0xa0/0xb0
 smp_apic_timer_interrupt+0x60/0x140
 apic_timer_interrupt+0xf/0x20
 </IRQ>
RIP: 0010:default_idle+0x23/0x170
Code: ff eb ab cc cc cc cc 0f 1f 44 00 00 41 54 55 53 65 8b 2d 10 96 92 7e 0f 1f 44 00 00 e9 07 00 00 00 0f 00 2d 21 d0 51 00 fb f4 <65> 8b 2d f6 95 92 7e 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 e5 95

Turns out that this is due to percpu_ref_switch_to_atomic() only
grabbing a reference to the percpu refcount if it's not already in
atomic mode. io_uring drops a ref and re-gets it when switching back to
percpu mode. We attempt to protect against this with the FFD_F_ATOMIC
bit, but that isn't reliable.

We don't actually need to juggle these refcounts between atomic and
percpu switch, we can just do them when we've switched to atomic mode.
This removes the need for FFD_F_ATOMIC, which wasn't reliable.

Fixes: 05f3fb3c53 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-26 10:53:33 -07:00
Jens Axboe
3a9015988b io_uring: import_single_range() returns 0/-ERROR
Unlike the other core import helpers, import_single_range() returns 0 on
success, not the length imported. This means that links that depend on
the result of non-vec based IORING_OP_{READ,WRITE} that were added for
5.5 get errored when they should not be.

Fixes: 3a6820f2bb ("io_uring: add non-vectored read/write commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-26 07:06:57 -07:00
Jens Axboe
2a44f46781 io_uring: pick up link work on submit reference drop
If work completes inline, then we should pick up a dependent link item
in __io_queue_sqe() as well. If we don't do so, we're forced to go async
with that item, which is suboptimal.

This also fixes an issue with io_put_req_find_next(), which always looks
up the next work item. That should only be done if we're dropping the
last reference to the request, to prevent multiple lookups of the same
work item.

Outside of being a fix, this also enables a good cleanup series for 5.7,
where we never have to pass 'nxt' around or into the work handlers.

Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-26 07:05:30 -07:00
Johannes Thumshirn
0dda2ddb7d zonefs: select FS_IOMAP
Zonefs makes use of iomap internally, so it should also select iomap in
Kconfig.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-02-26 16:58:15 +09:00
Christoph Hellwig
7c69eb84d9 zonefs: fix IOCB_NOWAIT handling
IOCB_NOWAIT can't just be ignored as it breaks applications expecting
it not to block.  Just refuse the operation as applications must handle
that (e.g. by falling back to a thread pool).

Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-02-26 16:57:35 +09:00
Jens Axboe
2d141dd2ca io-wq: ensure work->task_pid is cleared on init
We use ->task_pid for exit cancellation, but we need to ensure it's
cleared to zero for io_req_work_grab_env() to do the right thing. Take
a suggestion from Bart and clear the whole thing, just setting the
function passed in. This makes it more future proof as well.

Fixes: 36282881a7 ("io-wq: add io_wq_cancel_pid() to cancel based on a specific pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 13:23:48 -07:00
Jens Axboe
3030fd4cb7 io-wq: remove spin-for-work optimization
Andres reports that buffered IO seems to suck up more cycles than we
would like, and he narrowed it down to the fact that the io-wq workers
will briefly spin for more work on completion of a work item. This was
a win on the networking side, but apparently some other cases take a
hit because of it. Remove the optimization to avoid burning more CPU
than we have to for disk IO.

Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 08:57:37 -07:00
Xiaoguang Wang
bdcd3eab2a io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL
After making ext4 support iopoll method:
  let ext4_file_operations's iopoll method be iomap_dio_iopoll(),
we found fio can easily hang in fio_ioring_getevents() with below fio
job:
    rm -f testfile; sync;
    sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread
-rw=write -ioengine=io_uring  -hipri=1 -sqthread_poll=1 -direct=1
-bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting
with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled.

There are two issues that results in this hang, one reason is that
when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio
does not use io_uring_enter to get completed events, it relies on
kernel io_sq_thread to poll for completed events.

Another reason is that there is a race: when io_submit_sqes() in
io_sq_thread() submits a batch of sqes, variable 'inflight' will
record the number of submitted reqs, then io_sq_thread will poll for
reqs which have been added to poll_list. But note, if some previous
reqs have been punted to io worker, these reqs will won't be in
poll_list timely. io_sq_thread() will only poll for a part of previous
submitted reqs, and then find poll_list is empty, reset variable
'inflight' to be zero. If app just waits these deferred reqs and does
not wake up io_sq_thread again, then hang happens.

For app that entirely relies on io_sq_thread to poll completed requests,
let io_iopoll_req_issued() wake up io_sq_thread properly when adding new
element to poll_list, and when io_sq_thread prepares to sleep, check
whether poll_list is empty again, if not empty, continue to poll.

Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 08:40:43 -07:00
Jens Axboe
41726c9a50 io_uring: fix personality idr leak
We somehow never free the idr, even though we init it for every ctx.
Free it when the rest of the ring data is freed.

Fixes: 071698e13a ("io_uring: allow registering credentials")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-24 08:31:51 -07:00
Jens Axboe
193155c8c9 io_uring: handle multiple personalities in link chains
If we have a chain of requests and they don't all use the same
credentials, then the head of the chain will be issued with the
credentails of the tail of the chain.

Ensure __io_queue_sqe() overrides the credentials, if they are different.

Once we do that, we can clean up the creds handling as well, by only
having io_submit_sqe() do the lookup of a personality. It doesn't need
to assign it, since __io_queue_sqe() now always does the right thing.

Fixes: 75c6a03904 ("io_uring: support using a registered personality for commands")
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-23 19:46:13 -07:00
Linus Torvalds
d2eee25858 for-5.6-rc2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl5SdTAACgkQxWXV+ddt
 WDtOPQ/+PGbN2bfZSf0DBUcOC+IOdiCYWHmaO6NQZzQb4CTjuumsDErSTzbg77OQ
 gBqRBfcaWnyZZIabHe0JjctQ//buycP8yGb8VevgVdD4qBnb5sM/pvBqT4kO9Omy
 6K3W7RhcP8gejOxGJb4nuiUBdYRW3KTji8QT3TMv/njuqn0p8n1NgzVlz0m6+xtO
 IfJOqThvvG9LBytsQq/pvqaoXID/06lXRyM42XbsKFyygv10vp69xz5Skdl1XkGk
 pyymzLlLDkLorRuDkjnzIvOqNFDAYiSFJafHupSE4SlfscRYfTwCV0uXE+NX4bdL
 piTr5169ALoIRyTHU37YNNCPZXNGHnmn5Mtf4o8Q0ps0MKz1+sIjFRAxrdolLHjw
 iYcocXU9L5wtHUBouTBzAsnuWJnizJNExHYb/3MHnHZYDu371l8wOGL1AHzRXEm/
 qkxTPS3V2JpaFkFvTmwEQbl8PzDgpxpPDDBQUcEBZn3Vb9AFX38Fo/5OiGOnpnTd
 9wVKXK2S6vHz/xpfcT/3SOtDUljSPJMUXUVkVcdz+OfUWvn6icXzR0t4keXVqZv+
 INSOHzXb+iCuIb+NX7VZTN9oq0GH58aA+ApIo5beNbwJ6EzFotGE8dQmK3AfQ6pU
 Pod0gzW5Hqj9Q2AfWYTZjWP+Og+dF2+bQFYSRK8NjcKjcrvUEVU=
 =Asj0
 -----END PGP SIGNATURE-----

Merge tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "These are fixes that were found during testing with help of error
  injection, plus some other stable material.

  There's a fixup to patch added to rc1 causing locking in wrong context
  warnings, tests found one more deadlock scenario. The patches are
  tagged for stable, two of them now in the queue but we'd like all
  three released at the same time.

  I'm not happy about fixes to fixes in such a fast succession during
  rcs, but I hope we found all the fallouts of commit 28553fa992
  ('Btrfs: fix race between shrinking truncate and fiemap')"

* tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof
  Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents
  btrfs: fix bytes_may_use underflow in prealloc error condtition
  btrfs: handle logged extent failure properly
  btrfs: do not check delayed items are empty for single transaction cleanup
  btrfs: reset fs_root to NULL on error in open_ctree
  btrfs: destroy qgroup extent records on transaction abort
2020-02-23 09:43:50 -08:00
Linus Torvalds
a3163ca03f More miscellaneous ext4 bug fixes (all stable fodder)
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl5R8vEACgkQ8vlZVpUN
 gaMkPQf/QpimFVWvW+y2u9wOCl4pS38fog3SEbaCMcmCjndUfgLd9zf43GetFUfD
 DYbxmzotu+WEqHH83H6c+Cr/9tmhxrH5njhydxlzucocqyxdWmdWKe5cNz3ECJ6Z
 c4B1HFux+w/AfSGs73AU1K9APHlc/yXnZhgHpjLON6mP0Ata9lRZkmxwe9RnSWEn
 186U1/kWe6sHNyOe1iQJC1QOPSauqY8SQDTZr5QSHLEyO7M/eJje+bplocor6JnJ
 HTsKHdP1dNQaQzZxup4QgvZ33vAfgsgwIFtJKhF4ps+2NsILJzH5FfYW+dHTpnqe
 INuJM5kPkkUuNnQqCfFDOvmaDGwjqQ==
 =i1ka
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "More miscellaneous ext4 bug fixes (all stable fodder)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix mount failure with quota configured as module
  jbd2: fix ocfs2 corrupt when clearing block group bits
  ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
  ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
  ext4: fix potential race between s_flex_groups online resizing and access
  ext4: fix potential race between s_group_info online resizing and access
  ext4: fix potential race between online resizing and write operations
  ext4: add cond_resched() to __ext4_find_entry()
  ext4: fix a data race in EXT4_I(inode)->i_disksize
2020-02-23 09:42:19 -08:00
Linus Torvalds
b88025ea47 io_uring-5.6-2020-02-22
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl5RXt4QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgprPZEACevRyIjhdEmD9eyXlixw1O6zs/dHR4QVf6
 RuuNoX1Ssxmf4zHBPcifBVenoUhIviJ/hBACdYNuPz+YWdx3FO/BF8FFv656ssHr
 xhj8sC/8vz+fnwKyb/Lwt56NdRc8Ddtw6iWsF4po650n7JItq8BmDkHT/y3SJI0Z
 L1UrUX4TxXEDfKsW2gbNCNIPjaiDSErJFP6FT1pcUZwLmF3zyJC6btR21AaAJbRC
 CwatdbBg9K1SnvArn/NMd16C0p1LVBt3P2clagC90zlkCyb2vANN+YTnbo7KCsX7
 XmssosPu5lamJQdsTNNxH7DHVUh/lZg9CEhUpy2ctXYSf1a6Ak6Y3qktCM5VW7FX
 x+6aZdJj0UDdA+MvdcHZWjxKfJFmbS2iRjTfbTXpyLX/1qFmvI9ww9xzgP68iK8s
 guxLxOQoCDx102SNKGmffcKY2C+yl3HHGRZATxy9C85WSvz7bwtvcbWwT/x13UxO
 TWa8ghe0N4jfJ3sNfADZ0Dtehrj8ryslrRc0XS6y7v3m7MqOABkz7texH006j43G
 FW23kqMyYJTlm+JIEIly9C5MSd4nFU0gyfBtMKGMBHF2JHgZez1LkDEiC2B5O1he
 m9IAhGgFzgOuTFwJxwLcutDNUv4GyK6dMdLl+DzAv0hthSHjVsT2vb06X99NMenq
 nzMADXHvxQ==
 =euzH
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "Here's a small collection of fixes that were queued up:

   - Remove unnecessary NULL check (Dan)

   - Missing io_req_cancelled() call in fallocate (Pavel)

   - Put the cleanup check for aux data in the right spot (Pavel)

   - Two fixes for SQPOLL (Stefano, Xiaoguang)"

* tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block:
  io_uring: fix __io_iopoll_check deadlock in io_sq_thread
  io_uring: prevent sq_thread from spinning when it should stop
  io_uring: fix use-after-free by io_cleanup_req()
  io_uring: remove unnecessary NULL checks
  io_uring: add missing io_req_cancelled()
2020-02-22 11:12:55 -08:00
Xiaoguang Wang
c7849be9cc io_uring: fix __io_iopoll_check deadlock in io_sq_thread
Since commit a3a0e43fd7 ("io_uring: don't enter poll loop if we have
CQEs pending"), if we already events pending, we won't enter poll loop.
In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has
been terminated and don't reap pending events which are already in cq
ring, and there are some reqs in poll_list, io_sq_thread will enter
__io_iopoll_check(), and find pending events, then return, this loop
will never have a chance to exit.

I have seen this issue in fio stress tests, to fix this issue, let
io_sq_thread call io_iopoll_getevents() with argument 'min' being zero,
and remove __io_iopoll_check().

Fixes: a3a0e43fd7 ("io_uring: don't enter poll loop if we have CQEs pending")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-22 07:45:03 -07:00
Jan Kara
9db176bceb ext4: fix mount failure with quota configured as module
When CONFIG_QFMT_V2 is configured as a module, the test in
ext4_feature_set_ok() fails and so mount of filesystems with quota or
project features fails. Fix the test to use IS_ENABLED macro which
works properly even for modules.

Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz
Fixes: d65d87a074 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2020-02-21 19:32:07 -05:00
wangyan
8eedabfd66 jbd2: fix ocfs2 corrupt when clearing block group bits
I found a NULL pointer dereference in ocfs2_block_group_clear_bits().
The running environment:
	kernel version: 4.19
	A cluster with two nodes, 5 luns mounted on two nodes, and do some
	file operations like dd/fallocate/truncate/rm on every lun with storage
	network disconnection.

The fallocate operation on dm-23-45 caused an null pointer dereference.

The information of NULL pointer dereference as follows:
	[577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45.
	[577992.878290] Aborting journal on device dm-23-45.
	...
	[577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46.
	[577992.890908] __journal_remove_journal_head: freeing b_committed_data
	[577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30
	[577992.890918] __journal_remove_journal_head: freeing b_committed_data
	[577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30
	[577992.890922] __journal_remove_journal_head: freeing b_committed_data
	[577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30
	[577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30
	[577992.890928] __journal_remove_journal_head: freeing b_committed_data
	[577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30
	[577992.890933] __journal_remove_journal_head: freeing b_committed_data
	[577992.890939] __journal_remove_journal_head: freeing b_committed_data
	[577992.890949] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
	[577992.890950] Mem abort info:
	[577992.890951]   ESR = 0x96000004
	[577992.890952]   Exception class = DABT (current EL), IL = 32 bits
	[577992.890952]   SET = 0, FnV = 0
	[577992.890953]   EA = 0, S1PTW = 0
	[577992.890954] Data abort info:
	[577992.890955]   ISV = 0, ISS = 0x00000004
	[577992.890956]   CM = 0, WnR = 0
	[577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f8da07a9
	[577992.890960] [0000000000000020] pgd=0000000000000000
	[577992.890964] Internal error: Oops: 96000004 [#1] SMP
	[577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd)
	[577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G        W  OE     4.19.36 #1
	[577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
	[577992.890971] pstate: 60400009 (nZCv daif +PAN -UAO)
	[577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
	[577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2]
	[577992.891084] sp : ffff0000c8e2b810
	[577992.891085] x29: ffff0000c8e2b820 x28: 0000000000000000
	[577992.891087] x27: 00000000000006f3 x26: ffffa07957b02e70
	[577992.891089] x25: ffff807c59d50000 x24: 00000000000006f2
	[577992.891091] x23: 0000000000000001 x22: ffff807bd39abc30
	[577992.891093] x21: ffff0000811d9000 x20: ffffa07535d6a000
	[577992.891097] x19: ffff000001681638 x18: ffffffffffffffff
	[577992.891098] x17: 0000000000000000 x16: ffff000080a03df0
	[577992.891100] x15: ffff0000811d9708 x14: 203d207375746174
	[577992.891101] x13: 73203a524f525245 x12: 20373439343a6565
	[577992.891103] x11: 0000000000000038 x10: 0101010101010101
	[577992.891106] x9 : ffffa07c68a85d70 x8 : 7f7f7f7f7f7f7f7f
	[577992.891109] x7 : 0000000000000000 x6 : 0000000000000080
	[577992.891110] x5 : 0000000000000000 x4 : 0000000000000002
	[577992.891112] x3 : ffff000001713390 x2 : 2ff90f88b1c22f00
	[577992.891114] x1 : ffff807bd39abc30 x0 : 0000000000000000
	[577992.891116] Call trace:
	[577992.891139]  _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
	[577992.891162]  _ocfs2_free_clusters+0x100/0x290 [ocfs2]
	[577992.891185]  ocfs2_free_clusters+0x50/0x68 [ocfs2]
	[577992.891206]  ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2]
	[577992.891227]  ocfs2_add_inode_data+0x94/0xc8 [ocfs2]
	[577992.891248]  ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2]
	[577992.891269]  ocfs2_allocate_extents+0x14c/0x338 [ocfs2]
	[577992.891290]  __ocfs2_change_file_space+0x3f8/0x610 [ocfs2]
	[577992.891309]  ocfs2_fallocate+0xe4/0x128 [ocfs2]
	[577992.891316]  vfs_fallocate+0x11c/0x250
	[577992.891317]  ksys_fallocate+0x54/0x88
	[577992.891319]  __arm64_sys_fallocate+0x28/0x38
	[577992.891323]  el0_svc_common+0x78/0x130
	[577992.891325]  el0_svc_handler+0x38/0x78
	[577992.891327]  el0_svc+0x8/0xc

My analysis process as follows:
ocfs2_fallocate
  __ocfs2_change_file_space
    ocfs2_allocate_extents
      ocfs2_extend_allocation
        ocfs2_add_inode_data
          ocfs2_add_clusters_in_btree
            ocfs2_insert_extent
              ocfs2_do_insert_extent
                ocfs2_rotate_tree_right
                  ocfs2_extend_rotate_transaction
                    ocfs2_extend_trans
                      jbd2_journal_restart
                        jbd2__journal_restart
                          /* handle->h_transaction is NULL,
                           * is_handle_aborted(handle) is true
                           */
                          handle->h_transaction = NULL;
                          start_this_handle
                            return -EROFS;
            ocfs2_free_clusters
              _ocfs2_free_clusters
                _ocfs2_free_suballoc_bits
                  ocfs2_block_group_clear_bits
                    ocfs2_journal_access_gd
                      __ocfs2_journal_access
                        jbd2_journal_get_undo_access
                          /* I think jbd2_write_access_granted() will
                           * return true, because do_get_write_access()
                           * will return -EROFS.
                           */
                          if (jbd2_write_access_granted(...)) return 0;
                          do_get_write_access
                            /* handle->h_transaction is NULL, it will
                             * return -EROFS here, so do_get_write_access()
                             * was not called.
                             */
                            if (is_handle_aborted(handle)) return -EROFS;
                    /* bh2jh(group_bh) is NULL, caused NULL
                       pointer dereference */
                    undo_bg = (struct ocfs2_group_desc *)
                                bh2jh(group_bh)->b_committed_data;

If handle->h_transaction == NULL, then jbd2_write_access_granted()
does not really guarantee that journal_head will stay around,
not even speaking of its b_committed_data. The bh2jh(group_bh)
can be removed after ocfs2_journal_access_gd() and before call
"bh2jh(group_bh)->b_committed_data". So, we should move
is_handle_aborted() check from do_get_write_access() into
jbd2_journal_get_undo_access() and jbd2_journal_get_write_access()
before the call to jbd2_write_access_granted().

Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2020-02-21 19:32:07 -05:00
Eric Biggers
cb85f4d23f ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running
on it, the following warning in ext4_add_complete_io() can be hit:

WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120

Here's a minimal reproducer (not 100% reliable) (root isn't required):

        while true; do
                sync
        done &
        while true; do
                rm -f file
                touch file
                chattr -e file
                echo X >> file
                chattr +e file
        done

The problem is that in ext4_writepages(), ext4_should_dioread_nolock()
(which only returns true on extent-based files) is checked once to set
the number of reserved journal credits, and also again later to select
the flags for ext4_map_blocks() and copy the reserved journal handle to
ext4_io_end::handle.  But if EXT4_EXTENTS_FL is being concurrently set,
the first check can see dioread_nolock disabled while the later one can
see it enabled, causing the reserved handle to unexpectedly be NULL.

Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races
related to doing so as well, fix this by synchronizing changing
EXT4_EXTENTS_FL with ext4_writepages() via the existing
s_writepages_rwsem (previously called s_journal_flag_rwsem).

This was originally reported by syzbot without a reproducer at
https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf,
but now that dioread_nolock is the default I also started seeing this
when running syzkaller locally.

Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org
Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com
Fixes: 6b523df4fb ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2020-02-21 19:32:07 -05:00