mirror of
https://github.com/torvalds/linux.git
synced 2024-11-12 23:23:03 +00:00
c66db9e9a0
6230 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dan Williams
|
15fffc6a56 |
driver core: Fix uevent_show() vs driver detach race
uevent_show() wants to de-reference dev->driver->name. There is no clean
way for a device attribute to de-reference dev->driver unless that
attribute is defined via (struct device_driver).dev_groups. Instead, the
anti-pattern of taking the device_lock() in the attribute handler risks
deadlocks with code paths that remove device attributes while holding
the lock.
This deadlock is typically invisible to lockdep given the device_lock()
is marked lockdep_set_novalidate_class(), but some subsystems allocate a
local lockdep key for @dev->mutex to reveal reports of the form:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7+ #275 Tainted: G OE N
------------------------------------------------------
modprobe/2374 is trying to acquire lock:
ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220
but task is already holding lock:
ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&cxl_root_key){+.+.}-{3:3}:
__mutex_lock+0x99/0xc30
uevent_show+0xac/0x130
dev_attr_show+0x18/0x40
sysfs_kf_seq_show+0xac/0xf0
seq_read_iter+0x110/0x450
vfs_read+0x25b/0x340
ksys_read+0x67/0xf0
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (kn->active#6){++++}-{0:0}:
__lock_acquire+0x121a/0x1fa0
lock_acquire+0xd6/0x2e0
kernfs_drain+0x1e9/0x200
__kernfs_remove+0xde/0x220
kernfs_remove_by_name_ns+0x5e/0xa0
device_del+0x168/0x410
device_unregister+0x13/0x60
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c7/0x210
driver_detach+0x47/0x90
bus_remove_driver+0x6c/0xf0
cxl_acpi_exit+0xc/0x11 [cxl_acpi]
__do_sys_delete_module.isra.0+0x181/0x260
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The observation though is that driver objects are typically much longer
lived than device objects. It is reasonable to perform lockless
de-reference of a @driver pointer even if it is racing detach from a
device. Given the infrequency of driver unregistration, use
synchronize_rcu() in module_remove_driver() to close any potential
races. It is potentially overkill to suffer synchronize_rcu() just to
handle the rare module removal racing uevent_show() event.
Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1].
Fixes:
|
||
Linus Torvalds
|
8f3f7598cb |
regmap: Fix for v6.11
Arnd sent a workaround for a false positive warning which was showing up with GCC 14.1. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmajjeoACgkQJNaLcl1U h9BI3wf8CIpA+LOjtuXnfIGgKxjBeDYVz4ZRCVsgyaAQdQfARP9YvxoqBX8Vkoge EtpNbVX2hEB5iGshgFDdd1PBf/iaD37Yx6bqGQ98hwI22BI8io9NfjT6eibvpmj8 y+yZCDN+FrW1tWpayB5nccj1QXMapyU5XIwYu7W6L2a7oSOfpPP/WGbezDEKYjPl BWsW9l18pZlaL8dhDUfNcekTR9+7/HUT7cTzUp8I0/PtJNTasfxy+VfvLxheem99 dwuSFXb9+elYq8P2exuIB9IiE+7Kzj5DT6kogRSyOusd07+xe2sO1mXjN7s6J017 Xv8hXRsa9/Unjn28QEtxTA/AyqlEZg== =MCkH -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "Arnd sent a workaround for a false positive warning which was showing up with GCC 14.1" * tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: maple: work around gcc-14.1 false-positive warning |
||
|
Linus Torvalds
|
c9f33436d8 |
RISC-V Patches for the 6.11 Merge Window, Part 2
* Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. * The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. * Support for HAVE_ARCH_STACKLEAK. * The sv39 linear map has been extended to support 128GiB mappings. * The frequency of the mtime CSR is now visible via hwprobe. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmaj2EYTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiVG3D/9kNHTI09iPDJd6fTChE3cpMxy7xXXE URX3Avu+gYsJmIbYyg4RnQ8FGFN7icKBCrQqs7JmLliU0NU+YMcCcjsJA2QaivbD VAlaex1qNcvNGteHrpbqhr3Zs4zw8GlBkB3KFTLyPAp61bybGo0a/A5ONJ7ScQIW RWHewAPgb86cQ0Q34JpO87TqvMM0KMvhQP5dip+olaFjLRBzhXmGFZfHqA80kTWl 0ytYclVCHZMtO/5mnQpuIOVs1IKw9L4wa0sivOQF0iLTqfKDFALa6yZsThHA/w3e JVuBAdQhcPZ3fgO2fUfJPlW16GmRC2/tdiFg5NFw8k4vo7DYBwX55ztPKXqDrJDM 8ah85IeLiPar/A/uHdn6bPjK+aGMuzklKF50r62XXAc2fL8mza1sdvKCVOy2EOLn JyGI9c/10KpvN/DW8g7hPefhvbx4+tCKkFcPqf++VQha6W8cQdCKi+Li0Pm8TTnp XPQjIvSlDDG1Pl4ofgBSFoyB8pkBXNzvv8NZp+YYtnqSOLAKaZuP+KwA8TwHdvGM pdCXcL3KHiLy4/pJWEoNTutD0mbJ7PUIb2P/KkjqYDgp4F1n0Hg+/aeSIp+7a4Pv yTBctIGxrlriQMIdtWCR8tyhcPP4pDpGYkW0K15EE16G0NK0fjD89LEXYqT6ae2R C0QgiwnVe/eopg== =zeUn -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. - The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. - Support for HAVE_ARCH_STACKLEAK. - The sv39 linear map has been extended to support 128GiB mappings. - The frequency of the mtime CSR is now visible via hwprobe. * tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) RISC-V: Provide the frequency of time CSR via hwprobe riscv: Extend sv39 linear mapping max size to 128G riscv: enable HAVE_ARCH_STACKLEAK riscv: signal: Remove unlikely() from WARN_ON() condition riscv: Improve exception and system call latency RISC-V: Select ACPI PPTT drivers riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init() RISC-V: ACPI: Enable SPCR table for console output on RISC-V riscv: boot: remove duplicated targets line trace: riscv: Remove deprecated kprobe on ftrace support riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions RISC-V: run savedefconfig for defconfig RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: Add handler for SRAT RINTC affinity structure ... |
||
|
Linus Torvalds
|
c2a96b7f18 |
Driver core changes for 6.11-rc1
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
||
|
Linus Torvalds
|
7a46b17d4c |
dmaengine updates for v6.11
New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using dma
vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings, sprd sc9860 dma
binding
- Altera msgdma updates for descriptor management
-----BEGIN PGP SIGNATURE-----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=h0hh
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
|
||
|
Linus Torvalds
|
66ebbdfdeb |
Switch ARM/ARM64 over to the modern per device MSI domains:
This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmaeheUTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYocX4D/wLYD+DQDpA3U1XS8jPNE4vKcmBBNX8 Mj4qdHsY8fK+FhmtLsj8FL3iSTymPtgXzFupXGS+5iFG3LhbW8JWEbqjbowcJ1c8 /4w8sKyyWdCSScrCTrH4A3RrLNDAX3DzSMqqi17sdETuwtN0RJiXgcm/CwRXETmn kVqB7ddalyAR0Z2N/ym1fkuwyBAdeu3cBxMy/BWR6GFae1dAGe8Kr8GsmmuzBTFi DQSmkh6kZntTn9y+K7juXF+1q8InolmHiOOUeoUJachSCyp6nu9W2+S2MVUiuOA2 X1/Ei3eKvkBHFDd7phZnIrVecuNehAQEV6BRMKOYBiDG4lwD6vCbbr9/YF5vBGni tbZAetk9VBpIj0YRVAz7WkLC2JmVbw4znlrDwe8+xeLeDwRXl9f4Xc1Udr0qKgpd 1bNE1zG1z45v5J3OtJLJ4MCYcUCsQgv1CkUlNEdz5+NhXHT+W+oKJor/0WYJ3Qwe iqTEJ9BA1/SzvngwIt/uoMZlEjBl/0/T1UEMJvP/7oEqjl/UAEWGlpKnID3hsDc2 GcIEOJod6hWzyPyeJUI6RpCHy4ZG93WL7Ks+lvzfp381yoDL5/KlveDtSomyuzYF 2xXHUAvw8MAYfJ/CFft/DYme8sBpn1cxAMWdctEiAn0qfS7X1RNZ/RhQ2OXxRw3q tNpc0jEen9m72A== =2adH -----END PGP SIGNATURE----- Merge tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI interrupt updates from Thomas Gleixner: "Switch ARM/ARM64 over to the modern per device MSI domains. This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices" * tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/gic-v3-its: Correctly fish out the DID for platform MSI irqchip/gic-v3-its: Correctly honor the RID remapping genirq/msi: Move msi_device_data to core genirq/msi: Remove platform MSI leftovers irqchip/irq-mvebu-icu: Remove platform MSI leftovers irqchip/irq-mvebu-sei: Switch to MSI parent irqchip/mvebu-odmi: Switch to parent MSI irqchip/mvebu-gicp: Switch to MSI parent irqchip/irq-mvebu-icu: Prepare for real per device MSI irqchip/imx-mu-msi: Switch to MSI parent irqchip/gic-v2m: Switch to device MSI irqchip/gic_v3_mbi: Switch over to parent domain genirq/msi: Remove platform_msi_create_device_domain() irqchip/mbigen: Remove platform_msi_create_device_domain() fallback irqchip/gic-v3-its: Switch platform MSI to MSI parent irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI irqchip/mbigen: Prepare for real per device MSI irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X] irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX ... |
||
Palmer Dabbelt
|
6a4aa4c94b
|
Merge patch series "Add ACPI NUMA support for RISC-V"
Haibo Xu <haibo1.xu@intel.com> says:
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].
Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.
Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
|
||
Haibo Xu
|
5f76d4211e
|
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
There are lots of ACPI enabled systems that aren't NUMA and If the firmware didn't provide the SRAT/SLIT, then there will be a message "Failed to initialise from firmware" from arch_acpi_numa_init() which adding noise to the boot on all of those kind of systems. Replace the pr_info with pr_debug in arch_acpi_numa_init() to avoid it. Suggested-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/109354315a02cd22145d2effa4a8c571b69d3e56.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Arnd Bergmann
|
542440fd7b
|
regmap: maple: work around gcc-14.1 false-positive warning
With gcc-14.1, there is a false-postive -Wuninitialized warning in
regcache_maple_drop:
drivers/base/regmap/regcache-maple.c: In function 'regcache_maple_drop':
drivers/base/regmap/regcache-maple.c:113:23: error: 'lower_index' is used uninitialized [-Werror=uninitialized]
113 | unsigned long lower_index, lower_last;
| ^~~~~~~~~~~
drivers/base/regmap/regcache-maple.c:113:36: error: 'lower_last' is used uninitialized [-Werror=uninitialized]
113 | unsigned long lower_index, lower_last;
| ^~~~~~~~~~
I've created a reduced test case to see if this needs to be reported
as a gcc, but it appears that the gcc-14.x branch already has a change
that turns this into a more sensible -Wmaybe-uninitialized warning, so
I ended up not reporting it so far.
The reduced test case also produces a warning for gcc-13 and gcc-12
but I don't see that with the version in the kernel.
Link: https://godbolt.org/z/oKbohKqd3
Link: https://lore.kernel.org/all/CAMuHMdWj=FLmkazPbYKPevDrcym2_HDb_U7Mb9YE9ovrP0jJfA@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20240719104030.1382465-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
||
Thomas Gleixner
|
e989424899 |
genirq/msi: Remove platform MSI leftovers
No more users! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240623142235.943295676@linutronix.de |
||
|
Linus Torvalds
|
b3ce7a3084 |
drm next for 6.11-rc1:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmaYqVEACgkQDHTzWXnE
hr5p3Q/+OOxTHKJ/8WMwfV1Tuep5otkCZdBgNdcuu9zqzpEMEDUDwmV1iboIvT9x
qJsDwSAJomwbZAnVjDKsbZuycSHUBV6HQdf+5+rtq6be1EfFRwJVzOq0u5+D3KGt
7f2vy6sM9tw4tR6EikiuP7vCvnSz4iGrWERvEJDEtXECbALhju8sulht8ZMnr6GW
/MfUetULLSDjq0L1x3TWAq2MPGnJ5UxIkIeOBUP6n4etAUX1BPTNA6N76eN/xMvn
a40JhtM+pCjjkHxvloIZ+KTYN3S+hskIRksczPHh9HtNX7y/A437wyhOHJZ1NvZb
yc5ke9GjXxGcxyZH+PY5aCS7O/XElzSSkR1jFZ2s3/MX7PVKgCahGK7+yWjPsiK2
R5oXebdObshUa8LHDE/3WgBUmTchkvKRTXV9cvGqzxEPhC2zrxArvwP5v6B4mhCn
Vqo3Pv0Cyr+n65Z5Dzqz/9+m999LJjFTsTrug0p5b/qBJQKu2rQONe4lpZ0NFwwY
ExyjdxILj7mqrQpKcA6V5Bel5ZCnlVsGfTshFL6Iux54VFlJyRMzKWZ+Gdv4av5k
dbjz+re+CojKabn3ML/7pAQujK6Rqe58vPuHV78zkvAGJnQgJOOTrmYNYtn3oBqe
ogdCN+/PREb/9U7i6mQv5hhdHs4tT9ROXaT9jyb8XSHXW+t9lBM=
=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
|
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
e23dd95cfd |
spi: Updates for v6.11
There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper and
allowing the DMA mapping decision to be done per transfer instead of
per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVLH0ACgkQJNaLcl1U
h9DhHQf+KD1gVf0dF9N7Y4gf+fjFQpbf7hxpB24lpJ952/9Ke1hsM19JZDqNaTVa
ITXIyQLr4uCtPXZ6jOd03td/6TGs9sG3VTLcRrYCG44CvhWpDgAg9Nc3KbNj95Zf
oPWMLEG2Y2ZjGzIrbqciJ5IRF/gT4rnc2PwytmkrPYwQn6CLUCw7BM3QFFqMnyPb
U4UA/EmLuOqtlu4z+hdL97JX/XWQfWNLzXfIlIrfJserRBexwmefN7Y2+5fica02
OBTDyMsg82yZtqASvbsTVn4di577oCYbMnpy+0f+a74h2DDMDfspury8CbrST+Cj
Jr7/082RuYUlUUyrR9N98EhJ9p1K+w==
=snrv
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
Summary:
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper
and allowing the DMA mapping decision to be done per transfer
instead of per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"
* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
spi: dt-bindings: at91: Add sama7d65 compatible string
spi: add ch341a usb2spi driver
spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
spi: spi: Remove unnecessary ‘0’ values from status
spi: spi: Remove unnecessary ‘0’ values from rc
spi: xcomm: fix coding style
spi: xcomm: remove i2c_set_clientdata()
spi: xcomm: make use of devm_spi_alloc_host()
spi: xcomm: add gpiochip support
spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
spi: dt-bindings: fsl-dspi: Convert to yaml format
spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
spi: axi-spi-engine: remove platform_set_drvdata()
spi: spi-fsl-lpspi: Pass pm_ptr()
spi: spi-imx: Pass pm_ptr()
spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
spi: add devm_spi_optimize_message() helper
...
|
||
|
Linus Torvalds
|
25617a5c45 |
regmap: Updates for v6.11
There's one new feature here, a regmap_multi_reg_read() matching the existing write function which has some IIO users coming. This allows atomic reads from multiple registers without the need to wrap a higher level lock in the client driver just for regmap (which already has locks anyway). We also have one fix for the KUnit tests, and a bunch of cleanups. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVJRsACgkQJNaLcl1U h9CQcAf+PhHwUoxBextaJzy2HQe9CFV71/I4GEj0MTrtpqKDhmO8AQnsI4dKXr/9 hZPUPR7+6qw7N12NdZQcT6hIX9CnhdiaNALo4ANvG5KlxFljhFbv2sBg1QAgb+Ks 2gLapB4HY0jso+6urNEN5rvucFpf4Mxlz5ilrk3kuuJaC/xf6/QXoU5/9PjPyD5s ZuCBMg5G0BIIdwc9SFGJPv1UUJ0H6Aj/1ZQNo/JVtIj8uGt8TuvnUrmOxdnHRN1U b5AMjLnSYMtwRg7Nd/DCINmwPN+I0X79gNE4SG1LAOlQIChhW+47HuGWyCM40jGO p4X8o/zID9hw5q3y6CpwYvrJ5GRZbA== =ETId -----END PGP SIGNATURE----- Merge tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "There's one new feature here, a regmap_multi_reg_read() matching the existing write function which has some IIO users coming. This allows atomic reads from multiple registers without the need to wrap a higher level lock in the client driver just for regmap (which already has locks anyway). We also have one fix for the KUnit tests, and a bunch of cleanups" * tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: kunit: Add test cases for regmap_multi_reg_(read,write}() regmap: Implement regmap_multi_reg_read() regmap-irq: handle const struct regmap_irq_sub_irq_map const_structs.checkpatch: add regmap structs regmap: add missing MODULE_DESCRIPTION() macros regmap-i2c: add missing MODULE_DESCRIPTION() macro regmap: kunit: Use array_size() and sizeof(*ptr) consistently regmap: maple: Switch to use kmemdup_array() regmap: cache: Switch to use kmemdup_array() regmap: cache: Use correct type of the rb_for_each() parameter regmap: Switch to use kmemdup_array() regmap: kunit: add missing MODULE_DESCRIPTION() regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap() |
||
|
Linus Torvalds
|
c89d780cc1 |
arm64 updates for 6.11:
* Virtual CPU hotplug support for arm64 ACPI systems
* cpufeature infrastructure cleanups and making the FEAT_ECBHB ID bits
visible to guests
* CPU errata: expand the speculative SSBS workaround to more CPUs
* arm64 ACPI:
- acpi=nospcr option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
* GICv3, use compile-time PMR values: optimise the way regular IRQs are
masked/unmasked when GICv3 pseudo-NMIs are used, removing the need for
a static key in fast paths by using a priority value chosen
dynamically at boot time
* arm64 perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
* arm64 kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
* arm64 Documentation update with a minor clarification on TBI
* Miscellaneous:
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos
-----BEGIN PGP SIGNATURE-----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=ob2k
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
||
Jakub Kicinski
|
dd3cd3ca69 |
aux-sysfs-irqs
Shay Says:
==========
Introduce auxiliary bus IRQs sysfs
Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files. PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.
Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.
To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.
It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
bus
==========
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmaQTCYACgkQSD+KveBX
+j7nRAgAhyi8mD93AjpoXX8onbK3ZyPnGwLToCs0NT3EzT0BIwNvDovQp4rhcs16
3zVwvW+twVsbMuPYTpPVgcynpL6N0K/CoW+ubDGZaRIaf0nDmh4MY1wY/EUsVj8R
FbeTi5L+9MyKvFbtO5d4cW1q7M0XVD3uR8Wle6PwvXZ1gcM59vsR1eml25NLTC8B
Z9F9WKG+dFAni0ll/IL837Se3QQapRXtJQ3g6XbIcpXiMqgIrHZ9FyY0LvuWlQq4
LsIPKh7RySATmAYXwwpsnfdrilvvMHsyjlAoeNHEJBsAUY+kpOIFFi6J5EB+/oyo
jhBhlc4Al0vUXis9jGTysO7mVYVOUQ==
=DTxS
-----END PGP SIGNATURE-----
Merge tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
aux-sysfs-irqs
Shay Says:
==========
Introduce auxiliary bus IRQs sysfs
Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files. PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.
Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.
To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.
It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
bus
==========
* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose SFs IRQs
driver core: auxiliary bus: show auxiliary device IRQs
RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
net/mlx5: Reimplement write combining test
====================
Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Petr Tesarik
|
e777798e67 |
sysfs/cpu: Make crash_hotplug attribute world-readable
There is no reason to restrict access to this attribute, as it merely
reports whether crash elfcorehdr is automatically updated on CPU hot
plug/unplug and/or online/offline events.
Note that since commit
|
||
Shay Drory
|
a808878308 |
driver core: auxiliary bus: show auxiliary device IRQs
PCI subfunctions (SF) are anchored on the auxiliary bus. PCI physical and virtual functions are anchored on the PCI bus. The irq information of each such function is visible to users via sysfs directory "msi_irqs" containing files for each irq entry. However, for PCI SFs such information is unavailable. Due to this users have no visibility on IRQs used by the SFs. Secondly, an SF can be multi function device supporting rdma, netdevice and more. Without irq information at the bus level, the user is unable to view or use the affinity of the SF IRQs. Hence to match to the equivalent PCI PFs and VFs, add "irqs" directory, for supporting auxiliary devices, containing file for each irq entry. For example: $ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/ 50 51 52 53 54 55 56 57 58 Cc: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> --- v9-v10: - remove Przemek RB - add name field to auxiliary_irq_info (Greg and Przemek) - handle bogus IRQ in auxiliary_device_sysfs_irq_remove (Greg) v8-v9: - add Przemek RB - use guard() in auxiliary_irq_dir_prepare (Paolo) v7-v8: - use cleanup.h for info and name fields (Greg) - correct error flow in auxiliary_irq_dir_prepare (Przemek) - add documentation for new fields of auxiliary_device (Simon) v6-v7: - dynamically creating irqs directory when first irq file created (Greg) - removed irqs flag and simplified the dev_add() API (Greg) - move sysfs related new code to a new auxiliary_sysfs.c file (Greg) v5-v6: - removed concept of shared and exclusive and hence global xarray (Greg) v4-v5: - restore global mutex and replace refcount_t with simple integer (Greg) v3->4: - remove global mutex (Przemek) v2->v3: - fix function declaration in case SYSFS isn't defined v1->v2: - move #ifdefs from drivers/base/auxiliary.c to include/linux/auxiliary_bus.h (Greg) - use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL (Greg) - Fix kzalloc(ref) to kzalloc(*ref) (Simon) - Add return description in auxiliary_device_sysfs_irq_add() kdoc (Simon) - Fix auxiliary_irq_mode_show doc (kernel test boot) |
||
Guenter Roeck
|
c2bb8198fe
|
regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
Add test cases for regmap_multi_reg_read() and regmap_multi_reg_write(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://patch.msgid.link/20240711055352.3411807-1-linux@roeck-us.net Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Mark Brown
|
450a60ef60
|
regmap: Implement regmap_multi_reg_read()
Merge series from Guenter Roeck <linux@roeck-us.net>: regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from an array of non-sequential registers. It is helpful if multiple non- sequential registers need to be read in a single operation which would otherwise have to be mutex protected. The name of the new function was chosen to match the existing function regmap_multi_reg_write(). |
||
|
Guenter Roeck
|
3c1ff93b4d
|
regmap: Implement regmap_multi_reg_read()
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from an array of non-sequential registers. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240710015622.1960522-2-linux@roeck-us.net Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Greg Kroah-Hartman
|
67c1ba551e |
driver core: module: make module_[add|remove]_driver take a const *
The functions module_add_driver() and module_remove_driver() do not modify the struct device_driver structure directly, so they are safe to be marked as a constant pointer type. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/2024070850-entering-grandson-205e@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
f8fb469147 |
driver core: make driver_find_device() take a const *
The function driver_find_device() does not modify the struct device_driver structure directly, so it is safe to be marked as a constant pointer type. As that is fixed up, also change the function signature on the inline functions that call this, which are: driver_find_device_by_name() driver_find_device_by_of_node() driver_find_device_by_devt() driver_find_next_device() driver_find_device_by_acpi_dev() Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/2024070849-broken-front-9eb5@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
ab7a880263 |
driver core: make driver_[create|remove]_file take a const *
The functions driver_create_file() and driver_remove_file() do not modify the struct device_driver structure directly, so they are safe to be marked as a constant pointer type. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/2024070844-volley-hatchling-c812@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Thomas Weißschuh
|
f21711bbdb
|
regmap-irq: handle const struct regmap_irq_sub_irq_map
The struct instances supplied by the drivers are never modified. Handle them as const in the regmap core allowing the drivers to put them into .rodata. Also add a new entry to const_structs.checkpatch to make sure future instances of this struct already enter the tree as const. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://patch.msgid.link/20240706-regmap-const-structs-v1-2-d08c776da787@weissschuh.net Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Daniel Vetter
|
86634fa4e6 |
Linux 6.10-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaB0NweHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkvwH/36UJRk/o6wvXnyH E6QjCSWo2226APyWks22NjtC3I/8Iqdvkneuh6wG0qL2sXAB078EMjUq5R81bF8H wWFBJwetjYTp8GEyLioMEb2wCH/J3R29dLFC4UYTplafXRGP6//xcpJaKmTxcgdR 31IzvTPXbApZ7L3k1U6rA2bK9PNKcFCOvZlrNMUCuwMrabymHsDfOUt1DqXyg2xp zjqiWYBwlklozmgawSWt/mdEgkWuTcAbg+KyqDVQF59s9aj/OOwZ0j+HACq5V8CM quTPIAYL6CC9p7uxa69lGr/sgC0Is/BZLPX7RTZAwCgarGvnX+1HUsjDcaFCtrVg O6fPUV8= =pgUx -----END PGP SIGNATURE----- Merge v6.10-rc6 into drm-next The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
Zijun Hu
|
997197b58b |
devres: Correct code style for functions that return a pointer type
Correct code style for several functions that return a pointer type. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/1719931914-19035-6-git-send-email-quic_zijuhu@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Zijun Hu
|
56a20ad349 |
devres: Initialize an uninitialized struct member
Initialize an uninitialized struct member for driver API devres_open_group(). Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/1719931914-19035-4-git-send-email-quic_zijuhu@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Zijun Hu
|
bd50a97409 |
devres: Fix memory leakage caused by driver API devm_free_percpu()
It will cause memory leakage when use driver API devm_free_percpu()
to free memory allocated by devm_alloc_percpu(), fixed by using
devres_release() instead of devres_destroy() within devm_free_percpu().
Fixes:
|
||
|
Zijun Hu
|
c884e3249f |
devres: Fix devm_krealloc() wasting memory
Driver API devm_krealloc() calls alloc_dr() with wrong argument
@total_new_size, so causes more memory to be allocated than required
fix this memory waste by using @new_size as the argument for alloc_dr().
Fixes:
|
||
Andy Shevchenko
|
23c6859677 |
driver core: platform: Switch to use kmemdup_array()
Let the kememdup_array() take care about multiplication and possible overflows. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240606164926.3031358-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
d69d804845 |
driver core: have match() callback in struct bus_type take a const *
In the match() callback, the struct device_driver * should not be changed, so change the function callback to be a const *. This is one step of many towards making the driver core safe to have struct device_driver in read-only memory. Because the match() callback is in all busses, all busses are modified to handle this properly. This does entail switching some container_of() calls to container_of_const() to properly handle the constant *. For some busses, like PCI and USB and HV, the const * is cast away in the match callback as those busses do want to modify those structures at this point in time (they have a local lock in the driver structure.) That will have to be changed in the future if they wish to have their struct device * in read-only-memory. Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Alex Elder <elder@kernel.org> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
James Morse
|
4e1a7df454 |
cpumask: Add enabled cpumask for present CPUs that can be brought online
The 'offline' file in sysfs shows all offline CPUs, including those that aren't present. User-space is expected to remove not-present CPUs from this list to learn which CPUs could be brought online. CPUs can be present but not-enabled. These CPUs can't be brought online until the firmware policy changes, which comes with an ACPI notification that will register the CPUs. With only the offline and present files, user-space is unable to determine which CPUs it can try to bring online. Add a new CPU mask that shows this based on all the registered CPUs. Signed-off-by: James Morse <james.morse@arm.com> Tested-by: Miguel Luis <miguel.luis@oracle.com> Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> Tested-by: Jianyong Wu <jianyong.wu@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240529133446.28446-20-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
Jonathan Cameron
|
d830ef3ac5 |
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
For arm64 the CPU registration cannot complete until the ACPI interpreter us up and running so in those cases the arch specific arch_register_cpu() will return -EPROBE_DEFER at this stage and the registration will be attempted later. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Miguel Luis <miguel.luis@oracle.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240529133446.28446-3-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
Jeff Johnson
|
92955a25f7
|
regmap: add missing MODULE_DESCRIPTION() macros
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-ac97.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-ram.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-raw-ram.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-slimbus.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-spmi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-w1.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-sccb.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-spi-avmm.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240603-md-base-regmap-v1-1-ff7a2e5f990f@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Mark Brown
|
17436001a6
|
spi: add devm_spi_optimize_message() helper
Merge series from David Lechner <dlechner@baylibre.com>: In the IIO subsystem, we are finding that it is common to call spi_optimize_message() during driver probe since the SPI message doesn't change for the lifetime of the driver. This patch adds a devm_spi_optimize_message() helper to simplify this common pattern. |
||
|
Mark Brown
|
5a31243aa2 |
Linux 6.10-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZvTbAeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGVksIAJEn4a9IVM8FNCJy Dxo0BItD1/qJ5mLDptqUFRKlxInjbojofz5CyoeIeXb0DwRfB16ALXqNXAkd3APi saoOpfjFsg2H2OqL9CHdkzWcJEAq2lDnL0zaOjumeDVu/EyeT+tC4e4hq1e6Bm0E fPC5ms2b+07DF9Rg6/DW8yPbdM5n6Mz1bRd3fQOIgvpM3yGOyGztEBgTRub/ZUgH 5pNJauknFAZgdiWhgNpc+lPWYZbgHKULQPhUBPdVhDIXPtQNUlKgNTQc6+L0Nmbb K1sG1q7FLeMJOTFGQfD4r26X5DNQUi894q/9SX8X7rcrECdJKcw2WjVyB4myADpf ae2gP+A= =XjWP -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ3aXYACgkQJNaLcl1U h9DDkQf/RA185U/C7cZ+A7QMj7Tmb8DtMIEG/osWHpZtyL0GTB1w+SES1hpdDMPA e58F77n6AXu8REx4Kunvx0E0KT7yJVaDaZwz5g7WhE5PmzxsBAwtidUV7fAi6bVG VZeJBe2FiZgZTehZDbM0y385LVEKEfybuKxg+f6wFSWrR3+rCj78CD68BFC6G0me y/vYir/zKJm9vBUY+5UbAAwcYK89C99bJB5Ml6E96dAu+Z3df9y0MjWc0dS7bISD +lEdypS9QZMP2ubvdpOpdzRnIGaQgoPpWx67q6Y8xCQH179HT9/gXFqKAfKUNaLK pUGQtK405Ytd2xDjDLKJIvDQXFA72A== =4jSg -----END PGP SIGNATURE----- regmap: Merge up v6.10-rc4 There are fixes for kselftest build with clang which really help my CI. |
||
|
Greg Kroah-Hartman
|
269e974e66 |
driver core: make [device_]driver_attach take a const *
Change device_driver_attach() and driver_attach() to take a const * to struct device driver as neither of them modify the structure at all. Also, for some odd reason, drivers/dma/idxd/compat.c had a duplicate external reference to device_driver_attach(), so remove that to fix up the build, it should never have had that there in the first place. Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Petr Tesarik <petr.tesarik.ext@huawei.com> Cc: Alexander Lobakin <aleksander.lobakin@intel.com> Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/2024061401-rasping-manger-c385@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Uwe Kleine-König
|
2f3cfd2f4b |
driver core: Make dev_err_probe() silent for -ENOMEM
For an out-of-memory error there should be no additional output. Adapt dev_err_probe() to not emit the error message when err is -ENOMEM. This simplifies handling errors that might among others be -ENOMEM. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/3d1e308d45cddf67749522ca42d83f5b4f0b9634.1718311756.git.u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Danilo Krummrich
|
de6582833d |
rust: add firmware abstractions
Add an abstraction around the kernels firmware API to request firmware images. The abstraction provides functions to access the firmware's size and backing buffer. The firmware is released once the abstraction instance is dropped. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Acked-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20240618154841.6716-3-dakr@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
b5dd424181 |
Linux 6.10-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZvTbAeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGVksIAJEn4a9IVM8FNCJy Dxo0BItD1/qJ5mLDptqUFRKlxInjbojofz5CyoeIeXb0DwRfB16ALXqNXAkd3APi saoOpfjFsg2H2OqL9CHdkzWcJEAq2lDnL0zaOjumeDVu/EyeT+tC4e4hq1e6Bm0E fPC5ms2b+07DF9Rg6/DW8yPbdM5n6Mz1bRd3fQOIgvpM3yGOyGztEBgTRub/ZUgH 5pNJauknFAZgdiWhgNpc+lPWYZbgHKULQPhUBPdVhDIXPtQNUlKgNTQc6+L0Nmbb K1sG1q7FLeMJOTFGQfD4r26X5DNQUi894q/9SX8X7rcrECdJKcw2WjVyB4myADpf ae2gP+A= =XjWP -----END PGP SIGNATURE----- Merge tag 'v6.10-rc4' into driver-core-next We need the driver core and sysfs fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jeff Johnson
|
48c1a30bf1
|
regmap-i2c: add missing MODULE_DESCRIPTION() macro
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-i2c.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-base-regmap-v1-1-222be554d520@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Greg Kroah-Hartman
|
c6c631d2b7 |
driver core: mark async_driver as a const *
Within struct device_private, mark the async_driver * as const as it is never modified. This requires some internal-to-the-driver-core functions to also have their parameters marked as constant, and there is one place where we cast _back_ from the const pointer to a real one, as the driver core still wants to modify the structure in a number of remaining places. Cc: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240611130103.3262749-12-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
f6e98ef5f7 |
driver core: make driver_detach() take a const *
driver_detach() does not modify the driver itself, so make the pointer constant. In doing so, the function driver_allows_async_probing() also needs to be changed so that the pointer type passes through to that function properly. Cc: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240611130103.3262749-11-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
33ebea9bc0 |
driver core: make device_release_driver_internal() take a const *
Change device_release_driver_internal() to take a const struct device_driver * as it is not modifying it at all. Cc: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240611130103.3262749-10-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
0725e8f9c4 |
driver core: driver: mark driver_add/remove_groups constant
driver_add_groups() and driver_remove_groups should take a constant pointer as the structure is not modified, so make the change. Cc: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240611130103.3262749-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
841b7ebf81 |
driver core: platform: fix ups for constant struct device_driver
Fix up a few places in the platform core code that can easily handle struct device_driver being constant. This is part of the work to make all struct device_driver pointers be constant. Cc: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240611130103.3262749-8-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
ff985c7597 |
auxbus: make to_auxiliary_drv accept and return a constant pointer
In the quest to make struct device constant, start by making to_auxiliary_drv() return a constant pointer so that drivers that call this can be fixed up before the driver core changes. As the return type previously was not constant, also fix up all callers that were assuming that the pointer was not going to be a constant one in order to not break the build. Cc: Dave Ertman <david.m.ertman@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Bingbu Cao <bingbu.cao@intel.com> Cc: Tianshu Qiu <tian.shu.qiu@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Michael Chan <michael.chan@broadcom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Tariq Toukan <tariqt@nvidia.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Cc: Bard Liao <yung-chuan.liao@linux.intel.com> Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: intel-wired-lan@lists.osuosl.org Cc: linux-rdma@vger.kernel.org Cc: sound-open-firmware@alsa-project.org Cc: linux-sound@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # drivers/media/pci/intel/ipu6 Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20240611130103.3262749-7-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Rodrigo Vivi
|
89aa02edaa
|
Merge drm/drm-next into drm-xe-next
Needed to get tracing cleanup and add mmio tracing series. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
José Roberto de Souza
|
3b9c181bcd
|
devcoredump: Add dev_coredumpm_timeout()
Add function to set a custom coredump timeout. For Xe driver usage, current 5 minutes timeout may be too short for users to search and understand what needs to be done to capture coredump to report bugs. We have plans to automate(distribute a udev script) it but at the end will be up to distros and users to pack it so having a option to increase the timeout is a safer option. v2: - replace dev_coredump_timeout_set() by dev_coredumpm_timeout() (Mukesh) v3: - make dev_coredumpm() static inline (Johannes) v5: - rename DEVCOREDUMP_TIMEOUT -> DEVCD_TIMEOUT to avoid redefinition in include/net/bluetooth/coredump.h v6: - fix definition of dev_coredumpm_timeout() when CONFIG_DEV_COREDUMP is disabled Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Mukesh Ojha <quic_mojha@quicinc.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Link: https://patchwork.freedesktop.org/patch/msgid/20240611174716.72660-1-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |