Do not restrict range for preemption buffers allocation just to the end
of user and shave ranges, use them whole instead to avoid situation
where end of range might be already allocated causing preemption buffers
allocation to fail.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-27-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Allow to proceed with job command queue creation even if preemption
buffers failed to be allocated, print warning that preemption on such
command queue will be disabled.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-26-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Warn in ivpu_file_priv_put() checks a pointer that is previously
accessed. Warn in ivpu_ipc_fini() can be triggered even in valid cases
where IPC is disabled upon closing the device.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-25-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Move diagnostic functions to common error handling within ivpu_boot()
function to ensure diagnostics are gathered even in cases where NPU
fails after successful boot (DCT and HWS init failures).
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-24-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.
Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.
The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences.
Fixes: 45e45362e0 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
The current reset_engine implementation unconditionally resets
all engines. Improve implementation to reset only the engine
requested by the user space to allow more granular testing.
Also use DEFINE_DEBUGFS_ATTRIBUTE() to simplify implementation.
Same changes applied to resume_engine debugfs file for consistency.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-22-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
With recent Simics model update CLOCK_RESOURCE_OWN_ACK signal
was implemented as part of VPU STATUS register and workaround
is no longer needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-21-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add new test_mode BIT(9) that forces firmware to
enable turbo burst mode.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-20-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Save last used ID and use it to limit the possible values
for the ID. This should decrease the rate at which the IDs
are reused, which will make debugging easier.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-19-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Change debug message to error level in case of receiving
non-successful result of JSM message.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add one jiffy to ensure wait function never times out before
intended timeout value, which could happen if absolute timeout value
is less than (1s / CONFIG_HZ) in the future.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-16-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Make the dvfs_mode read-write to allow checking current mode.
Simplify the dvfs_mode implementation with the DEFINE_DEBUGFS_ATTRIBUTE.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-15-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Previously Simics was not providing workpoint for configurations
with 0 tiles enabled, that had to be worked around in the KMD.
This got fixed in Simics and workaround is no longer needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-14-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Hardcoded driver date is useless, so use kernel version as a driver date
to make identifying .ko file easier. Also allow to pass DRIVER_DATE
on build time to allow versioning the driver in case it is built out
of the tree.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
With recent Simics update DVFS flows using cdyn were fixed
and it is possible to enable D0i3/D3 entry flows on autosuspend.
Set autosuspend timeout to 100 ms by default on Simics.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Follow HW documentation recommendation of 500 ns delay between setting
AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power
island enabling. Previously this was only done correctly for VPU 4+.
VPU 3.7 had the delay added after power island disable where it is not
needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Send JSM state dump message at the beginning of TDR handler. This allows
FW to collect debug info in the FW log before the state of the NPU is
lost allowing to analyze the cause of a TDR.
Wait a predefined timeout (10 ms) so the FW has a chance to write debug
logs. We cannot wait for JSM response at this point because IRQs are
already disabled before TDR handler is invoked.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Use coredump (if available) to collect FW logs in case of a FW crash.
This makes dmesg more readable and allows to collect more log data.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
- Fix empty log detection that couldn't work without read_wrap_count
- Start printing wrapped log from correct position (log_start)
- Properly handle logs that are wrapped multiple times in reference
to reader position
- Don't add a newline when log buffer is wrapped
- Always add a newline after printing a log buffer in case log does
not end with one
Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add ivpu_fw_log_reset() that resets the read_index of all FW logs
on cold boot so logs are properly read.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
This commit bumps:
- Boot API from 3.24.0 to 3.26.3
- JSM API from 3.16.0 to 3.25.0
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Co-developed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-2-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmbr2BALHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYNheA/6A453SQy2kFvspFRvEp8ztEqtvxwxGLAUMIyvmU+a
9b37KlMwUnpbMsXK5+KtYdTLRoIvtl89uIkdZq7pYYKj0uoPZvF9QVnKtrJWAvqK
fFuauokZznuD3ZSd6v6uY4ijb29ImGfx5kZopQf1zWoYLENxM7mWqRU+eqxDozev
FbyfYhJzMBhpHveen9+Q7PEfi/90ZdEqtJhSK2AOzuV9ZvbYiSFCrcnT/4wM30DS
2OxjGa8tKcGYZ9ah0rF2V5hboaRuYedTFgXoKfUSJINJkzmBlTXdxVx5Xr3kQtyC
7S/xv2y79CXkDKck2+IY7xkhwwBsXPrTAyTzWAIJqOEmaMJ4KqEW54JOsK+VHfmO
29UKBnASOK0xvfCzakm2631iOzEZF743RgpQiOGeMcnph789Mwu8EUCcqeEW/fJy
Xh7B0z3/XgJz8BtTG/64IhmqO63Cwa/o7DSQdLr9dh5F/mPBzqrnRov97KL7mH1q
VSO0Z7+8J0x9ALcYutpth/IzG/lXtXn/pfR1sj6dBHvjf5SwjuT8MKUHgh0l6N+C
BWZn8swwrZaJ2Li2Gv3CpnCzVQZCkL6ns9VqAWiWq7VfGhDLndMqfi/jHCyGH83i
E3dMtqf81XaQ7JRDPCs7Jx/4Zkn/iNkkZe8IQsByMc1BY4oeD7/Z2s8mkK8MbNla
/CA=
=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Accel minor management is based on DRM (and is also using struct
drm_minor internally), since DRM is using XArray for minors, it makes
sense to also convert accel.
As the two implementations are identical (only difference being the
underlying xarray), move the accel_minor_* functionality to DRM.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-3-michal.winiarski@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Modules that load firmware from various paths at runtime must declare
those paths at compile time, via the MODULE_FIRMWARE macro, so that the
firmware paths are included in the module's metadata.
The accel/ivpu driver loads firmware but lacks this metadata,
preventing dracut from correctly locating firmware files. Fix it.
Fixes: 9ab43e95f9 ("accel/ivpu: Switch to generation based FW names")
Fixes: 02d5b0aacd ("accel/ivpu: Implement firmware parsing and booting")
Signed-off-by: Alexander F. Lent <lx@xanderlent.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240709-fix-ivpu-firmware-metadata-v3-1-55f70bba055b@xanderlent.com
This tag contains habanalabs driver changes for v6.11.
The notable changes are:
- uAPI changes:
- Use device-name directory in debugfs-driver-habanalabs.
- Expose server type in debugfs.
- New features and improvements:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Firmware related changes:
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Bug fixes and code cleanups:
- Move heartbeat work initialization to early init.
- Fix a race when receiving events during reset.
- Change the heartbeat scheduling point.
- Maintainers:
- Change habanalabs maintainer and git repo path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ofir Bitton <obitton@habana.ai>
Link: https://patchwork.freedesktop.org/patch/msgid/ZnfIjTH5AYQvPe7n@obitton-vm-u22.habana-labs.com
It’s better to avoid long sleeps right from the beginning of the polling
since the data may be available much sooner than the sleep period.
Because polling host memory is inexpensive, this change gradually
increases the sleep time up to the user-requested period.
Signed-off-by: Didi Freiman <dfreiman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The device heartbeat work is currently initialized at
device_heartbeat_schedule() which is called at the end of
hl_device_init().
However hl_device_init() can fail at a previous step, and in such a
case, a subsequent call to hl_device_fini() will lead to calling
cleanup_resources() and accessing this work uninitialized.
As there is no real need to re-initialize this work every time it is
rescheduled, move this initialization to device_early_init() to be done
once and early enough.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The test packet which is sent to FW for the PQ heartbeat is used also as
the trigger in FW to send the EQ heartbeat event.
Add the time of the last sent packet to the debug info which is printed
upon a EQ heartbeat failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Add a dump of the EQ entries headers upon a EQ heartbeat failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Don't print the "previous EQ index" value in case of a EQ heartbeat
failure, because it is incremented along with the EQ CI and therefore
redundant.
In addition, as the CPU-CP PI is zeroed when it reaches a value that is
twice the queue size, add a value of the CI with a similar wrap around,
to make it easier to compare the values.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
In order to have better debuggability upon encountering FW issues,
We are adding additional info once CPU packet timeout expires.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
When device release triggers a hard reset, there is a printout of
the cause. Currently listed causes (that increment context refcount)
are active command submissions and exported DMA buffer objects. In
any other case, the printout emits "unknown reason". We identify and
print another reason - allocated command buffers.
Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Some systems allow a maximum number of 128 MSI-X interrupts.
Hence we reduce the interrupt count to 128 instead of 512.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
When sending disable pci msg towards firmware, there is a
possibility that an EQ packet is already pending,
disabling EQ interrupt will prevent this from happening.
The interrupt will be re-enabled after reset.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Currently we schedule the heartbeat thread at late init, only then
we set the INTS_REGISTER packet which enables events to be received
from firmware.
Init may take some time and we want to give firmware 2 full cycles of
heartbeat thread after it received INTS_REGISTER.
The patch will move the heartbeat thread scheduling to be after driver
is done with all initializations.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
