Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct
irq_affinity_devres.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-hardening@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231006201749.work.432-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the merge of immutable point in PM OPP tree shared with SCMI so
that the SCMI changes based on these OPP changes can be merged via the
SCMI tree.
* 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
To enable generic support for performance scaling for PM domains, let's
implement the ->set_performance_state() callback for genpd.
Beyond this change, users of the corresponding genpd specific API,
dev_pm_genpd_set_performance_state() are encouraged to switch to the common
dev_pm_domain_set_performance_state() API.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The generic PM domain is currently the only PM domain variant that supports
performance scaling. To allow performance scaling to be supported through a
common interface, let's add an optional callback ->set_performance_state(),
in the struct dev_pm_domain.
Moreover, let's add a function, dev_pm_domain_set_performance_state(), that
may be called by consumers to request a new performance state for a device
through its PM domain.
Note that, in most cases it's preferred that a consumer use the OPP library
to request a new performance state for its device. Although, this requires
some additional changes to be supported, which are being implemented from
subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is no reason why the KUnit Tests for the property entry API can
only be built-in. Add support for building these tests as a loadable
module, like is supported by most other tests.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/98388154383df9d4ced73946efd18318aeea50e2.1695820382.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel documentation validator is not happy with:
drivers/base/core.c:67: warning: Function parameter or member 'flags' not described in '__fwnode_link_add'
Add missing parameter description.
Fixes: 6a6dfdf8b3 ("driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230919195048.3197551-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OF and ACPI currently are using asymmetrical APIs to check
for the firmware node type. Unify them by using is_*_node()
against struct fwnode_handle pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231003142122.3072824-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the temporary variable for the struct device pointer the code
looks better and slightly easier to read and parse by human being.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231003142122.3072824-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usual pattern is to bail out on the error case. Besides that
one of the labels is redundant as we may return directly. Refactor
platform_device_add() and platform_dma_configure() accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231003142122.3072824-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting from the commit 37c12e7497 ("[DRIVER MODEL] Improved
dynamically allocated platform_device interface") the pdev expects
to be allocated beforehand or guaranteed to be non-NULL.
Hence the leftover check is now redundant (as we have no combined
calls like platform_device_add(platform_device_alloc(...)) in the
entire kernel source code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231003142122.3072824-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A fix for a long standing issue where when we create a new node in an
rbtree register cache we were failing to convert the register address
of the new register into a bitmask correctly and marking the wrong
register as being present in the newly created node. This would only
have affected devices with a register stride other than 1 but would
corrupt data on those devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUcVmcACgkQJNaLcl1U
h9A4sgf+K/KziZcfrjzZhsuQ02qfNVDwBrYcsJCW8CjomFq1kb7QMwX1NgDkZRRD
+RbBuPvj1t/BMzsePJWrY7wDcOQHPijQPeOufcz6ZxASX0LQN3SCQR2GV+JJJSXb
XW0RLws6WcpG15XZvV8ddxYgeIeAKOhrECZg8bcHvsdin5rU19H4FydiLDS7ZCvV
jN1XYtwtFosaV/Zi28cE5nOJ3xFZeYzzx6SbdpCiQSY4llqiMxVBfffpS3wDQHWb
hLHDHeiD/kNqS+sDVDsHEOgHiWMv1JN8P6pNvPMdNqVDAgq5lVlAB3zex1pFCTV9
FRVBTgKLZEafeMqIpMus6WJe0oKCTQ==
=LK1Y
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for a long standing issue where when we create a new node in an
rbtree register cache we were failing to convert the register address
of the new register into a bitmask correctly and marking the wrong
register as being present in the newly created node.
This would only have affected devices with a register stride other
than 1 but would corrupt data on those devices"
* tag 'regmap-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: rbtree: Fix wrong register marked as in-cache when creating new node
When regcache_rbtree_write() creates a new rbtree_node it was passing the
wrong bit number to regcache_rbtree_set_register(). The bit number is the
offset __in number of registers__, but in the case of creating a new block
regcache_rbtree_write() was not dividing by the address stride to get the
number of registers.
Fix this by dividing by map->reg_stride.
Compare with regcache_rbtree_read() where the bit is checked.
This bug meant that the wrong register was marked as present. The register
that was written to the cache could not be read from the cache because it
was not marked as cached. But a nearby register could be marked as having
a cached value even if it was never written to the cache.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 3f4ff561bc ("regmap: rbtree: Make cache_present bitmap per node")
Link: https://lore.kernel.org/r/20230922153711.28103-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases the OPP tables aren't specified in device tree, but rather
encoded in the FW. To allow a genpd provider to specify them dynamically
instead, let's add a new genpd flag, GENPD_FLAG_OPP_TABLE_FW.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-13-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The commit d21fdd07ce ("driver core: Return proper error code when
dev_set_name() fails") rewrote the logic of handling the dev_set_name()
error codes, but missed the point that initially set error value to
-EINVAL might be rewritten and hence the error path can't be triggered
at some circumstances. To fix this, make sure that error variable is
set to -EINVAL when other conditionals are false.
Reported-by: syzbot+bdfb03b1ec8b342c12cb@syzkaller.appspotmail.com
Fixes: d21fdd07ce ("driver core: Return proper error code when dev_set_name() fails")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230828145824.3895288-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is a small set of driver core updates and additions for 6.6-rc1.
Included in here are:
- stable kernel documentation updates
- class structure const work from Ivan on various subsystems
- kernfs tweaks
- driver core tests!
- kobject sanity cleanups
- kobject structure reordering to save space
- driver core error code handling fixups
- other minor driver core cleanups
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH77Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZMACePk8SitfaJc6FfFf5I7YK7Nq0V8MAn0nUjgsR
i8NcNpu/Yv4HGrDgTdh/
=PJbk
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core updates and additions for 6.6-rc1.
Included in here are:
- stable kernel documentation updates
- class structure const work from Ivan on various subsystems
- kernfs tweaks
- driver core tests!
- kobject sanity cleanups
- kobject structure reordering to save space
- driver core error code handling fixups
- other minor driver core cleanups
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
driver core: Call in reversed order in device_platform_notify_remove()
driver core: Return proper error code when dev_set_name() fails
kobject: Remove redundant checks for whether ktype is NULL
kobject: Add sanity check for kset->kobj.ktype in kset_register()
drivers: base: test: Add missing MODULE_* macros to root device tests
drivers: base: test: Add missing MODULE_* macros for platform devices tests
drivers: base: Free devm resources when unregistering a device
drivers: base: Add basic devm tests for platform devices
drivers: base: Add basic devm tests for root devices
kernfs: fix missing kernfs_iattr_rwsem locking
docs: stable-kernel-rules: mention that regressions must be prevented
docs: stable-kernel-rules: fine-tune various details
docs: stable-kernel-rules: make the examples for option 1 a proper list
docs: stable-kernel-rules: move text around to improve flow
docs: stable-kernel-rules: improve structure by changing headlines
base/node: Remove duplicated include
kernfs: attach uuid for every kernfs and report it in fsid
kernfs: add stub helper for kernfs_generic_poll()
x86/resctrl: make pseudo_lock_class a static const structure
x86/MSR: make msr_class a static const structure
...
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
-----BEGIN PGP SIGNATURE-----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=kVVr
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-maping updates from Christoph Hellwig:
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: optimize get_max_slots()
swiotlb: move slot allocation explanation comment where it belongs
swiotlb: search the software IO TLB only if the device makes use of it
swiotlb: allocate a new memory pool when existing pools are full
swiotlb: determine potential physical address limit
swiotlb: if swiotlb is full, fall back to a transient memory pool
swiotlb: add a flag whether SWIOTLB is allowed to grow
swiotlb: separate memory pool data from other allocator data
swiotlb: add documentation and rename swiotlb_do_find_slots()
swiotlb: make io_tlb_default_mem local to swiotlb.c
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
dma-contiguous: check for memory region overlap
dma-contiguous: support numa CMA for specified node
dma-contiguous: support per-numa CMA for all architectures
dma-mapping: move arch_dma_set_mask() declaration to header
swiotlb: unexport is_swiotlb_active
x86: always initialize xen-swiotlb when xen-pcifront is enabling
xen/pci: add flag for PCI passthrough being possible
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
This is a much quieter release than the past few, there's one small API
addition that I noticed a user for in ALSA and a bunch of cleanups:
- Provide an interface for determining if a register is present in the
cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary bodges
that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp43QACgkQJNaLcl1U
h9BjUQf/RDJztYDL/ELIxVPfdFWAgTfAErcRgKpdpnrhMR0GljGYNyrTMwUBbnuF
+EL2v+k34wDNGobLbnGaHJIMb+r26QrHCoX9Zm0r/b5z9v3yS3QXco/MueZyMz45
SYbiEUnXj/WjYUUtVpVw6nxnREH6XpOZ1080XF4Bg9YpyCiq7128WJwivuT8XLJM
qZSb4DOQXFV26nitpTuJMkRIS1FgIh5ZKAPWpvZfP+wOStZhW3IFGlWIAkOQQ5gK
PqFA0BQV1fOVttjRGAR2sKCS4MfuIkIHmCfSfvNfLQG2GW86zb+Bpi0BFEUnl4Py
dqzztIknq19fWe9mCElSrdww25M2vg==
=fqmz
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much quieter release than the past few, there's one small
API addition that I noticed a user for in ALSA and a bunch of
cleanups:
- Provide an interface for determining if a register is present in
the cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary
bodges that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support"
* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix the type used for a bitmap pointer
regmap: Remove dynamic allocation warnings for rbtree and maple
regmap: rbtree: Use alloc_flags for memory allocations
regmap: maple: Use alloc_flags for memory allocations
regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
ALSA: hda: Use regcache_reg_cached() rather than open coding
regmap: Provide test for regcache_reg_present()
regmap: Let users check if a register is cached
regmap: Provide user selectable option to enable regmap
regmap: mmio: Remove unused 64-bit support code
regmap: cache: Revert "Add 64-bit mode support"
regmap: Revert "add 64-bit mode support" and Co.
Introduce the crash_hotplug attribute for memory and CPUs for use by
userspace. These attributes directly facilitate the udev rule for
managing userspace re-loading of the crash kernel upon hot un/plug
changes.
For memory, expose the crash_hotplug attribute to the
/sys/devices/system/memory directory. For example:
# udevadm info --attribute-walk /sys/devices/system/memory/memory81
looking at device '/devices/system/memory/memory81':
KERNEL=="memory81"
SUBSYSTEM=="memory"
DRIVER==""
ATTR{online}=="1"
ATTR{phys_device}=="0"
ATTR{phys_index}=="00000051"
ATTR{removable}=="1"
ATTR{state}=="online"
ATTR{valid_zones}=="Movable"
looking at parent device '/devices/system/memory':
KERNELS=="memory"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{auto_online_blocks}=="offline"
ATTRS{block_size_bytes}=="8000000"
ATTRS{crash_hotplug}=="1"
For CPUs, expose the crash_hotplug attribute to the
/sys/devices/system/cpu directory. For example:
# udevadm info --attribute-walk /sys/devices/system/cpu/cpu0
looking at device '/devices/system/cpu/cpu0':
KERNEL=="cpu0"
SUBSYSTEM=="cpu"
DRIVER=="processor"
ATTR{crash_notes}=="277c38600"
ATTR{crash_notes_size}=="368"
ATTR{online}=="1"
looking at parent device '/devices/system/cpu':
KERNELS=="cpu"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{crash_hotplug}=="1"
ATTRS{isolated}==""
ATTRS{kernel_max}=="8191"
ATTRS{nohz_full}==" (null)"
ATTRS{offline}=="4-7"
ATTRS{online}=="0-3"
ATTRS{possible}=="0-7"
ATTRS{present}=="0-3"
With these sysfs attributes in place, it is possible to efficiently
instruct the udev rule to skip crash kernel reloading for kernels
configured with crash hotplug support.
For example, the following is the proposed udev rule change for RHEL
system 98-kexec.rules (as the first lines of the rule file):
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
When examined in the context of 98-kexec.rules, the above rules test if
crash_hotplug is set, and if so, the userspace initiated
unload-then-reload of the crash kernel is skipped.
CPU and memory checks are separated in accordance with CONFIG_HOTPLUG_CPU
and CONFIG_MEMORY_HOTPLUG kernel config options. If an architecture
supports, for example, memory hotplug but not CPU hotplug, then the
/sys/devices/system/memory/crash_hotplug attribute file is present, but
the /sys/devices/system/cpu/crash_hotplug attribute file will NOT be
present. Thus the udev rule skips userspace processing of memory hot
un/plug events, but the udev rule will evaluate false for CPU events, thus
allowing userspace to process CPU hot un/plug events (ie the
unload-then-reload of the kdump capture kernel).
Link: https://lkml.kernel.org/r/20230814214446.6659-5-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's logically correct to call the removal notifiers in the reversed order
as it might be dependent to each other. Luckily, platform_notify_remove()
currently is not used and the others have no dependency use, but theoretically
it's still possible.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230818133654.767986-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whe device_add() tries to assign a device name with help of
dev_set_name() the error path explicitly uses -EINVAL, while
the function may return something different.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230817091221.463721-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add one more space to FileHugePages and FilePmdMapped, so the output is
aligned with other rows in /sys/devices/system/node/nodeN/meminfo.
Link: https://lkml.kernel.org/r/be861b50-a790-e041-bcb0-2a987dcfd1a@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With memmap on memory, some architecture needs more details w.r.t altmap
such as base_pfn, end_pfn, etc to unmap vmemmap memory. Instead of
computing them again when we remove a memory block, embed vmem_altmap
details in struct memory_block if we are using memmap on memory block
feature.
[yangyingliang@huawei.com: fix error return code in add_memory_resource()]
Link: https://lkml.kernel.org/r/20230809081552.1351184-1-yangyingliang@huawei.com
Link: https://lkml.kernel.org/r/20230808091501.287660-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 06188bc80c ("drivers: base: Add basic devm tests for root
devices") introduced a new set of tests for root devices that could be
compiled as a module, but didn't have the usual module macros.
Make sure they're there.
Fixes: 06188bc80c ("drivers: base: Add basic devm tests for root devices")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230816073019.1446155-2-mripard@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b4cc44301b ("drivers: base: Add basic devm tests for platform
devices") introduced a new set of tests for platform devices that could
be compiled as a module, but didn't have the usual module macros.
Make sure they're there.
Fixes: b4cc44301b ("drivers: base: Add basic devm tests for platform devices")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230816073019.1446155-1-mripard@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.
This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.
We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.
This is effectively the same change than commit 2f8d16a996 ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddea ("driver core: free devres in device_release") over
memory leaks concerns.
This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.
Fixes: a525a3ddea ("driver core: free devres in device_release")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-3-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Platform devices show some inconsistencies with how devm resources are
released when the device has been probed and when it hasn't.
In particular, we can register device-managed actions no matter if the
device has be bound to a driver or not, but devres_release_all() will
only be called if it was bound to a driver or if there's no reference
held to it anymore.
If it wasn't bound to a driver and we still have a reference,
devres_release_all() will never get called. This is surprising
considering that if the driver isn't bound but doesn't have any
reference to it anymore, that function will get called, and if it was
bound to a driver but still has references, that function will get
called as well.
Even if that case is fairly unusual, it can easily lead to memory leaks.
The plan is, with the next patch, to make it consistent and enforce that
devres_release_all() is called no matter what situation we're in. For
now, it just tests for the current behaviour and skips over the
inconsistencies.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-2-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root devices show some odd behaviours compared to regular "bus" devices
that have been probed through the usual mechanism, so let's create kunit
tests to exercise those paths and odd cases.
It's not clear whether root devices are even allowed to use device
managed resources, but the fact that it works in some cases but not
others like shown in that test suite shouldn't happen either way: we
want to make it consistent and documented.
These tests will (after the following patches) ensure that consistency
and effectively document that it's allowed.
If it ever turns out to be a bad idea, we can always roll back and
modify the tests then.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-1-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In
6524c798b7 ("driver core: cpu: Make cpu_show_not_affected() static")
I fat-fingered the name of cpu_show_gds(). Usually, I'd rebase but since
those are extraordinary embargoed times, the commit above was already
pulled into another tree so no no.
Therefore, fix it ontop.
Fixes: 6524c798b7 ("driver core: cpu: Make cpu_show_not_affected() static")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230811095831.27513-1-bp@alien8.de
Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de
* Add Base GDS mitigation
* Support GDS_NO under KVM
* Fix a documentation typo
-----BEGIN PGP SIGNATURE-----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=ZAPY
-----END PGP SIGNATURE-----
Merge tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/gds fixes from Dave Hansen:
"Mitigate Gather Data Sampling issue:
- Add Base GDS mitigation
- Support GDS_NO under KVM
- Fix a documentation typo"
* tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix backwards on/off logic about YMM support
KVM: Add GDS_NO support to KVM
x86/speculation: Add Kconfig option for GDS
x86/speculation: Add force option to GDS mitigation
x86/speculation: Add Gather Data Sampling mitigation
vulnerability on AMD processors. In short, this is yet another issue
where userspace poisons a microarchitectural structure which can then be
used to leak privileged information through a side channel.
-----BEGIN PGP SIGNATURE-----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=73JY
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/srso fixes from Borislav Petkov:
"Add a mitigation for the speculative RAS (Return Address Stack)
overflow vulnerability on AMD processors.
In short, this is yet another issue where userspace poisons a
microarchitectural structure which can then be used to leak privileged
information through a side channel"
* tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Tie SBPB bit setting to microcode patch detection
x86/srso: Add a forgotten NOENDBR annotation
x86/srso: Fix return thunks in generated code
x86/srso: Add IBPB on VMEXIT
x86/srso: Add IBPB
x86/srso: Add SRSO_NO support
x86/srso: Add IBPB_BRTYPE support
x86/srso: Add a Speculative RAS Overflow mitigation
x86/bugs: Increase the x86 bugs vector size to two u32s
Booting the kernel with "maxcpus=1" is a common technique for CPU
partitioning and isolation. It delays the CPU bringup process until
when the bootup scripts are ready to bring CPUs online by writing 1 to
/sys/device/system/cpu/cpu<X>/online. However, it was found that not
all the CPUs were online after bootup. The collection of offline CPUs
are different after every reboot.
Further investigation reveals that some "online" write operations
fail with an -EBUSY error. This error is returned when CPU hotplug is
temporiarly disabled when cpu_hotplug_disable() is called.
During bootup, the main caller of cpu_hotplug_disable() is
pci_call_probe() for PCI device initialization. By measuring the times
spent with cpu_hotplug_disabled set in a typical 2-socket server, most
of them last less than 10ms. However, there are a few that can last
hundreds of ms. Note that the cpu_hotplug_disabled period of different
devices can overlap leading to longer cpu_hotplug_disabled hold time.
Since the CPU hotplug disable condition is transient and it is not
that easy to modify all the existing bootup scripts to handle this
condition, the kernel can help by retrying the online operation when
an -EBUSY error is returned. This patch retries the online operation
in cpu_subsys_online() when an -EBUSY error is returned for up to 5
times after an exponentially increasing delay that can last a total of
at least 620ms of waiting time by calling msleep().
With this patch in place, booting up the patched kernel with "maxcpus=1"
does not leave any CPU in an offline state in 10 reboot attempts.
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20230724143826.3996163-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When test_remove is enabled really_probe() does not properly pair
dma_configure() with dma_remove(), it will end up calling dma_configure()
twice. This corrupts the owner_cnt and renders the group unusable with
VFIO/etc.
Add the missing cleanup before going back to re_probe.
Fixes: 25f3bcfc54 ("driver core: Add dma_cleanup callback in bus_type")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Closes: https://lore.kernel.org/all/6472f254-c3c4-8610-4a37-8d9dfdd54ce8@huawei.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v2-4deed94e283e+40948-really_probe_dma_cleanup_jgg@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test_platform_device_register_node() function should return error
pointers instead of NULL. That is what the callers are expecting.
Fixes: 57ea974fb8 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1e11ed19-e1f6-43d8-b352-474134b7c008@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace open coded functionality of kstrdup_and_replace() with a call.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230804143910.15504-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There's no reason the generic platform bus code needs to call
of_platform_register_reconfig_notifier(). The notifier can be setup
before the platform bus is. Let's move it into of_core_init() which is
called just before platform_bus_init() instead to keep more of the DT
bits in the DT code.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230717143718.1715773-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
SWIOTLB implementation details should not be exposed to the rest of the
kernel. This will allow to make changes to the implementation without
modifying non-swiotlb code.
To avoid breaking existing users, provide helper functions for the few
required fields.
As a bonus, using a helper function to initialize struct device allows to
get rid of an #ifdef in driver core.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.
The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence. To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.
To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference. In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.
In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Drop the wake-irq enable and disable helpers which have not been used
since commit bed570307e ("PM / wakeirq: Fix dedicated wakeirq for
drivers not using autosuspend").
Note that these functions are essentially just leftovers from the first
iteration of the wake-irq implementation where device drivers were
supposed to call these functions themselves instead of PM core (as
is also indicated by the bogus kernel doc comments).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.
Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.
Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.
Fixes: 69728051f5 ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thanks to Dan and Guenter's very prompt updates of the rbtree and maple
caches to support GPF_ATOMIC allocations and since the update shook out
a bunch of users at least some of whom have been suitably careful about
ensuring that the cache is prepoulated so there are no dynamic
allocations after init let's revert the warnings.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721-regmap-enable-kmalloc-v1-1-f78287e794d3@kernel.org
The kunit tests discovered a sleeping in atomic bug. The allocations
in the regcache-rbtree code should use the map->alloc_flags instead of
GFP_KERNEL.
[ 5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[ 5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[ 5.006219] preempt_count: 1, expected: 0
[ 5.006414] 1 lock held by kunit_try_catch/117:
[ 5.006590] #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[ 5.007493] irq event stamp: 162
[ 5.007627] hardirqs last enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[ 5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[ 5.008119] softirqs last enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[ 5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[ 5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G N 6.4.4-rc3-g0e8d2fdfb188 #1
[ 5.009011] Hardware name: Generic DT based system
[ 5.009277] unwind_backtrace from show_stack+0x18/0x1c
[ 5.009497] show_stack from dump_stack_lvl+0x38/0x5c
[ 5.009676] dump_stack_lvl from __might_resched+0x188/0x2d0
[ 5.009860] __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[ 5.010061] __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[ 5.010254] kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[ 5.010446] regcache_rbtree_write from _regmap_write+0x88/0x140
[ 5.010634] _regmap_write from regmap_write+0x44/0x68
[ 5.010803] regmap_write from basic_read_write+0x8c/0x270
[ 5.010980] basic_read_write from kunit_try_run_case+0x48/0xa0
Fixes: 28644c809f ("regmap: Add the rbtree cache support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ee59d128-413c-48ad-a3aa-d9d350c80042@roeck-us.net/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/58f12a07-5f4b-4a8f-ab84-0a42d1908cb9@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
REGCACHE_MAPLE needs to allocate memory for regmap operations.
This results in lockdep splats if used with fast_io since fast_io uses
spinlocks for locking.
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 167, name: kunit_try_catch
preempt_count: 1, expected: 0
1 lock held by kunit_try_catch/167:
#0: 838e9c10 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
irq event stamp: 146
hardirqs last enabled at (145): [<8078bfa8>] crng_make_state+0x1a0/0x294
hardirqs last disabled at (146): [<80c5f62c>] _raw_spin_lock_irqsave+0x7c/0x80
softirqs last enabled at (0): [<80110cc4>] copy_process+0x810/0x216c
softirqs last disabled at (0): [<00000000>] 0x0
CPU: 0 PID: 167 Comm: kunit_try_catch Tainted: G N 6.5.0-rc1-00028-gc4be22597a36-dirty #6
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x38/0x5c
dump_stack_lvl from __might_resched+0x188/0x2d0
__might_resched from __kmem_cache_alloc_node+0x1f4/0x258
__kmem_cache_alloc_node from __kmalloc+0x48/0x170
__kmalloc from regcache_maple_write+0x194/0x248
regcache_maple_write from _regmap_write+0x88/0x140
_regmap_write from regmap_write+0x44/0x68
regmap_write from basic_read_write+0x8c/0x27c
basic_read_write from kunit_generic_run_threadfn_adapter+0x1c/0x28
kunit_generic_run_threadfn_adapter from kthread+0xf8/0x120
kthread from ret_from_fork+0x14/0x3c
Exception stack(0x881a5fb0 to 0x881a5ff8)
5fa0: 00000000 00000000 00000000 00000000
5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Use map->alloc_flags instead of GFP_KERNEL for memory allocations to fix
the problem.
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230720172021.2617326-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
REGCACHE_RBTREE and REGCACHE_MAPLE dynamically allocate memory for regmap
operations. This is incompatible with spinlock based locking which is used
for fast_io operations. Reject affected configurations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230720032848.1306349-2-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
REGCACHE_RBTREE and REGCACHE_MAPLE dynamically allocate memory
for regmap operations. This is incompatible with spinlock based locking
which is used for fast_io operations. Disable locking for the associated
unit tests to avoid lockdep splashes.
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Fixes: 2238959b6a ("regmap: Add some basic kunit tests")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230720032848.1306349-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Currently the regcache core unconditionally enables async I/O for all cache
types, causing problems for the maple tree cache which dynamically allocates
the buffers used to write registers to the device since async requires the
buffers to be kept around until the I/O has been completed.
This use of async I/O is mainly for the rbtree cache which stores data in
a format directly usable for regmap_raw_write(), though there is a special
case for single register writes which would also have allowed it to be used
with the flat cache. It is a bit of a landmine for other caches since it
implicitly converts sync operations to async, and with modern hardware it
is not clear that async I/O is actually a performance win as shown by the
performance work David Jander did with SPI. In multi core systems the cost
of managing concurrency ends up swamping the performance benefit and almost
all modern systems are multi core.
Address this by pushing the enablement of async I/O down into the rbtree
cache where it is actively used, avoiding surprises for other cache
implementations.
Reported-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Fixes: bfa0b38c14 ("regmap: maple: Implement block sync for the maple tree cache")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230719-regcache-async-rbtree-v1-1-b03d30cf1daf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA driver has a use case for checking if a register is cached which
it bodges in awkwardly and unclearly. Provide an API which allows it to
directly do what it's trying to do.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230717-regmap-cache-check-v1-1-73ef688afae3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.
This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.
Cc: stable@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-2-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When problems were noticed with the register address not being taken
into account when limiting raw transfers with I2C devices we fixed this
in the core. Unfortunately it has subsequently been realised that a lot
of buses were relying on the prior behaviour, partly due to unclear
documentation not making it obvious what was intended in the core. This
is all more involved to fix than is sensible for a fix commit so let's
just drop the original fixes, a separate commit will fix the originally
observed problem in an I2C specific way
Fixes: 3981514180 ("regmap: Account for register length when chunking")
Fixes: c8e796895e ("regmap: spi-avmm: Fix regmap_bus max_raw_write")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-1-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since apparently enabling all the KUnit tests shouldn't enable any new
subsystems it is hard to enable the regmap KUnit tests in normal KUnit
testing scenarios that don't enable any drivers. Add a Kconfig option
to help with this and include it in the KUnit all tests config.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-regmap-kunit-enable-v1-1-13e296bd0204@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When allocating the 2D array for handling IRQ type registers in
regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix
with num_config_bases rows and num_config_regs columns.
This is currently handled by allocating a buffer to hold a pointer for
each row (i.e. num_config_bases). After that, the logic attempts to
allocate the memory required to hold the register configuration for
each row. However, instead of doing this allocation for each row
(i.e. num_config_bases allocations), the logic erroneously does this
allocation num_config_regs number of times.
This scenario can lead to out-of-bounds accesses when num_config_regs
is greater than num_config_bases. Fix this by updating the terminating
condition of the loop that allocates the memory for holding the register
configuration to allocate memory only for each row in the matrix.
Amit Pundir reported a crash that was occurring on his db845c device
due to memory corruption (see "Closes" tag for Amit's report). The KASAN
report below helped narrow it down to this issue:
[ 14.033877][ T1] ==================================================================
[ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364
[ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1
[ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850
[ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8
[ 14.255669][ T1] The buggy address is located 0 bytes inside of
[ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858)
Fixes: faa87ce919 ("regmap-irq: Introduce config registers for irq types")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd04mu6JojT3y6wyN2YeVkPR5R3qnkKJ8iR8if_YByCn4w@mail.gmail.com/
Tested-by: John Stultz <jstultz@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org> # tested on Dragonboard 845c
Cc: stable@vger.kernel.org # v6.0+
Cc: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: "Isaac J. Manjarres" <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20230711193059.2480971-1-isaacmanjarres@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With unsigned int type we never ever can pass 64-bit value.
Remove never properly worked code.
Note, there are no users in kernel for this size of register
offsets or data.
This reverts commit afcc00b91f.
Also revert other 64-bit code excerpts in the regmap implementation
that had been induced by the false impression made by the above
mentioned change that there is a support of that data size.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230622183613.58762-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKSEQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoowCfT+Joha+cz4edAFUvd55lKPPJJFsAoNiprHmX
di37sirvn6vo54Hk0Nyq
=qqTo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Skip empty folders creation
sysfs: Improve readability by following the kernel coding style
drivers: fwnode: fix fwnode_irq_get[_byname]()
ata: ahci_platform: Make code agnostic to OF/ACPI
device property: Implement device_is_compatible()
ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
base/node: Use 'property' to identify an access parameter
driver core: device.h: add some missing kerneldocs
kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
isa: Remove unnecessary checks
MAINTAINERS: add entry for auxiliary bus
debugfs: Correct the 'debugfs_create_str' docs
serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
iio: adc: Use devm_krealloc_array
hwmon: pmbus: Use devm_krealloc_array
Another busy release for regmap with the second half fo the maple tree
register cache implementation, there's some smaller optimisations that
could be done but this should now be able to replace the rbtree cache
for most devices.
We also had a followup from Aidan MacDonald's refactoring of some of the
regmap-irq interfaces, the conversion is complete so the old interfaces
are removed. This means that even with the new features for the maple
tree cache we'd have a nice negative diffstat were it not for the
addition of a bunch more KUnit coverage.
There's one GPIO patch in here, it was a dependency for a cleanup of an
API in the regmap-irq code for which the gpio-104-dio-48e driver was the
only user.
Highlights:
- The maple tree cache can now load in default values more efficiently,
and is capabale of syncing multiple registers in a single write
during cache sync.
- More KUnit coverage, including some coverage for raw I/O and a dummy
RAM backed cache to support it.
- Removal of several old interfaces in regmap-irq now all the users
have been modernised.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZj0cACgkQJNaLcl1U
h9BNdAf+Kjw+WbqDj/glPTAfrth5aPOyheq9stklzY3mE0E+AxAsHd2PrvYwn1Rt
jiAb96CqsVNP3WFVj6vmM/kfonE7xiBzPng2QtIWKJjxM/PYyLJZkElF6VqZz4cz
ftS4GMAWJadOvIMZgtCFOOujTaBoN0ik2ryZYofVvI8e98W89ifLvCv4aRiJ3Qn8
2R4Wk37JvZtIc2q5kaZ+wo+JIXVijlt7gU+9ZMT7BvJu1ot/KXY3Q3npfSK2Bv5u
qDkMWNZoy9kNd035E8rXt2OTzMlxgUu766wpg3YGU2Hqt15N0n5rpgLc2uB24niG
0yiCYbA2NT5J6+P+/VsE/VTBmJwK8w==
=E+Tk
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another busy release for regmap with the second half of the maple tree
register cache implementation, there's some smaller optimisations that
could be done but this should now be able to replace the rbtree cache
for most devices.
We also had a followup from Aidan MacDonald's refactoring of some of
the regmap-irq interfaces, the conversion is complete so the old
interfaces are removed. This means that even with the new features for
the maple tree cache we'd have a nice negative diffstat were it not
for the addition of a bunch more KUnit coverage.
There's one GPIO patch in here, it was a dependency for a cleanup of
an API in the regmap-irq code for which the gpio-104-dio-48e driver
was the only user.
Highlights:
- The maple tree cache can now load in default values more
efficiently, and is capabale of syncing multiple registers
in a single write during cache sync
- More KUnit coverage, including some coverage for raw I/O
and a dummy RAM backed cache to support it
- Removal of several old interfaces in regmap-irq now all
users have been modernised"
* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
regmap: Allow reads from write only registers with the flat cache
regmap: Drop early readability check
regmap: Check for register readability before checking cache during read
regmap: Add test to make sure we don't sync to read only registers
regmap: Add a test case for write only registers
regmap: Add test that writes to write only registers are prevented
regmap: Add debugfs file for forcing field writes
regmap: Don't check for changes in regcache_set_val()
regmap: maple: Implement block sync for the maple tree cache
regmap: Provide basic KUnit coverage for the raw register I/O
regmap: Provide a ram backed regmap with raw support
regmap: Add missing cache_only checks
regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
regmap: Load register defaults in blocks rather than register by register
regmap: mmio: Allow passing an empty config->reg_stride
regmap-irq: Drop backward compatibility for inverted mask/unmask
regmap-irq: Minor adjustments to .handle_mask_sync()
regmap-irq: Remove support for not_fixed_stride
regmap-irq: Remove type registers
regmap-irq: Remove virtual registers
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter).
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui).
- Fix invalid initialization for pl4_supported field in the Intel RAPL
power capping driver (Sumeet Pawnikar).
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven).
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny).
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny).
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo).
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET).
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski).
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary).
-----BEGIN PGP SIGNATURE-----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=SZV7
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using it
and thus preventing a whole set of attacks against such guests like
memory replay and the like.
There are a couple of strategies of how memory should be accepted
- the current implementation does an on-demand way of accepting.
-----BEGIN PGP SIGNATURE-----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=FS95
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmSV8dwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpilGD/9Yys1oxIXJpRf00fzrylAlBthRxMjFQVWw
zAut106hAQiBHvU8IkmGA3MvEFVHxtzwYhHI7IR8K3aZBIqscweCqmVI9JyogJw9
U9Twnzel47VmuKdM94FeoN+hbj1fP8EWTjzmy67/zEEfFCdmHvNlMi3lSrGYIpFy
39LxTB99Y4UarM5PtWbes37GYYljzMSWKuo4AfBkvq1eQa+sZ0Vq2xAABKq3UM7f
apqhgHtkJooRePDP0eQp+kAyyVMgW2jIK+oIdJDxNF3CKTu2w40RzaYz6fp+jVSU
H4R/xS59GW4/xql+VBJDh/qJg9K62DPPYjlW8BmSR8+IjvfFpsyH3/MacE50CD3P
20fs/Mnj49H79fDrQEHJI53cOOb2EmUitbwLbvOcColNTPpt8loBtdQxjF2RMU8R
Nyort9DJPFclYCxky1LYg1CNEC2Ln4Zy/jD47wPvqRmOQphOoVlV/hPnOEqvjaZC
49Vn70W2DeE9cXvYI7ha+XIg6/oj+Gs3iusEbV08Ci7EAtXgI+ZUUsQ97K8UNiUh
h2lqSJtuI7lBpYP9sf+BeCch5UCC+xGYyTdoM5f58lehWBBPtbs0g7S9RyRyOYxe
n+yxEUo3dAGzJ/xsKAjinbZfeWIpr0b1TkAh4w3Cq/BKzRr9Bp8lBAxYuancbQ+Y
1ADPteUOTA==
=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
The earlier fix to take account of the register data size when limiting
raw register writes exposed the fact that the Intel AVMM bus was
incorrectly specifying too low a limit on the maximum data transfer, it
is only capable of transmitting one register so had set a transfer size
limit that couldn't fit both the value and the the register address into
a single message.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSS8bEACgkQJNaLcl1U
h9B1zwf/emwrogeLq+eQ03Q9O4oE7OmbYmbTKKhZHtdwtUxZ4qsZ9aNekcgPw1Kv
riZHiL2EC7EKFAqTl1KiGsoJTWQONt32DFcc+27fW6IyXAFc4AMDf2JPnKMtZC83
0R+H0vC/FDVO6lzxNerPuC62ydaBr38XdimyCwYgLtzNWwsZUNh6leXgjFbF3sh7
MEi/SaLH9hcBr0suERnXh3DZUAT7d2kvwL1krSDHF7pvhQ+Z2pn96B1NVnaVVhM1
OlyfQLieRZz1Q2yF2LASI3I9n2IWeToR9i2iaWn2RlGiBzXpo5E5YpEFtH7umCH0
AjoI5Cf44xFXh5asJskRydgI7iKwPQ==
=yQ+K
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"One more fix for v6.4
The earlier fix to take account of the register data size when
limiting raw register writes exposed the fact that the Intel AVMM bus
was incorrectly specifying too low a limit on the maximum data
transfer, it is only capable of transmitting one register so had set a
transfer size limit that couldn't fit both the value and the the
register address into a single message"
* tag 'regmap-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi-avmm: Fix regmap_bus max_raw_write
The max_raw_write member of the regmap_spi_avmm_bus structure is defined
as:
.max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
SPI_AVMM_VAL_SIZE == 4 and MAX_WRITE_CNT == 1 so this results in a
maximum write transfer size of 4 bytes which provides only enough space to
transfer the address of the target register. It provides no space for the
value to be transferred. This bug became an issue (divide-by-zero in
_regmap_raw_write()) after the following was accepted into mainline:
commit 3981514180 ("regmap: Account for register length when chunking")
Change max_raw_write to include space (4 additional bytes) for both the
register address and value:
.max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
Fixes: 7f9fb67358 ("regmap: add Intel SPI Slave to AVMM Bus Bridge support")
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230620202824.380313-1-russell.h.weight@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit f38d1a6d00 ("PM: domains: Allocate governor data dynamically
based on a genpd governor") started to use the in-parameters in
genpd_add_device(), without first doing a verification of them.
This isn't really a big problem, as most callers do a verification already.
Therefore, let's drop the verification from genpd_add_device() and make
sure all the callers take care of it instead.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f38d1a6d00 ("PM: domains: Allocate governor data dynamically based on a genpd governor")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have some drivers that have a use case for cached write only
registers, doing read/modify/writes on read only registers in order to
work more easily with bitfields. Go back to trying the cache before we
check if we can read from the device.
Fixes: eab5abdeb7 ("regmap: Check for register readability before checking cache during read")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230615-regmap-drop-early-readability-v1-1-8135094362de@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Another fix for the maple tree cache, Takashi noticed that unlike other
caches the maple tree cache didn't check for read only registers before
trying to sync which would result in spurious syncs for read only
registers where we don't have a default. This was due to the check
being open coded in the caches, we now check in the shared "does this
register need sync" function so that is fixed for this and future
caches.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSK99kACgkQJNaLcl1U
h9B9YAf/cfOLwuU+OoHp6pvCZHQjojwRlXenp7pEzMlVvlzl/cm4Y0XDGpuP/vGc
MipxznnCzxLGWN2eVhoQcp2Ay8+bHJ9EohQ68HJ/WUv1GVjR+my7sqVVflqorIwm
gwDy2NBEBFe7m1MEITveLVWcV5Hviy7X0SMC7XPeAOs8Edg1AOqrsJ4Ta1+6z6zg
7/jlCwozDggV+qO/+jDGrKGCRidqH1E5KgTm+oWHV4HMJEPqt0GYYK+/5ELAQIsb
uWhye5LsIKbwLbOhcbkxqLf1r0Zeg4bwgubhfvgs8aky+uWCJrw9eVQD2S04mdVI
Rata8+XNkhYAv0BWRN87kg9wKyXyBQ==
=z6Cs
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Another fix for the maple tree cache, Takashi noticed that unlike
other caches the maple tree cache didn't check for read only registers
before trying to sync which would result in spurious syncs for read
only registers where we don't have a default.
This was due to the check being open coded in the caches, we now check
in the shared 'does this register need sync' function so that is fixed
for this and future caches"
* tag 'regmap-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: regcache: Don't sync read-only registers
The fwnode_irq_get() and the fwnode_irq_get_byname() return 0 upon
device-tree IRQ mapping failure. This is contradicting the
fwnode_irq_get_byname() function documentation and can potentially be a
source of errors like:
int probe(...) {
...
irq = fwnode_irq_get_byname();
if (irq <= 0)
return irq;
...
}
Here we do correctly check the return value from fwnode_irq_get_byname()
but the driver probe will now return success. (There was already one
such user in-tree).
Change the fwnode_irq_get_byname() to work as documented and make also the
fwnode_irq_get() follow same common convention returning a negative errno
upon failure.
Fixes: ca0acb511c ("device property: Add fwnode_irq_get_byname")
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <3e64fe592dc99e27ef9a0b247fc49fa26b6b8a58.1685340157.git.mazziesaccount@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from Mark Brown <broonie@kernel.org>:
Since Takashi found an issue with maple tree syncing registers it
shouldn't do add some test cases that catch that case and some more
potential issues, ideally we'd run through the combination of
readability with all possible I/O calls but that's lifting for another
day. We did find one issue with missing readability checks which will
be fixed separately.
`_regmap_update_bits()` checks if the current register value differs
from the new value, and only writes to the register if they differ. When
testing hardware drivers, it might be desirable to always force a
register write, for example when writing to a `regmap_field`. This
enables and simplifies testing and verification of the hardware
interaction. For example, when using a hardware mock/simulation model,
one can then more easily verify that the driver makes the correct
expected register writes during certain events.
Add a bool variable `force_write_field` and a corresponding debugfs
entry to enable this. Since this feature could interfere with driver
operation, guard it with a macro.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/pnd1qifa7sj.fsf@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
regcache_maple_sync() tries to sync all cached values no matter
whether it's writable or not. OTOH, regache_sync_val() does care the
wrtability and returns -EIO for a read-only register. This results in
an error message like:
snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2f0009. -5
and the sync loop is aborted incompletely.
This patch adds the writable register check to regcache_sync_val() for
addressing the bug above.
Note that, although we may add the check in the caller side
(regcache_maple_sync()), here we put in regcache_sync_val(), so that a
similar case like this can be avoided in future.
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Link: https://lore.kernel.org/r/877cs7g6f1.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230613112240.3361-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
Our existing coverage only deals with buses that provide single register
read and write operations, extend it to cover raw buses using a similar
approach with a RAM backed register map that the tests can inspect to
check operations. This coverage could be more complete but provides a
good start.
The only user of regcache_set_val() ignores the return value so we may as
well not bother checking if the value we are trying to set is the same as
the value already stored.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-regcache-set-val-no-ret-v1-1-9a6932760cf8@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For register maps where we can write multiple values in a single bus
operation it is generally much faster to do so. Improve the performance of
maple tree cache syncs on such devices by identifying blocks of adjacent
registers that need to be written out and combining them into a single
operation.
Combining writes does mean that we need to allocate a scratch buffer and
format the data into it but it is expected that for most cases where caches
are in use the cost of I/O will be much greater than the cost of doing the
allocation and format.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-regcache-maple-sync-raw-v1-1-8ddeb4e2b9ab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSGPiIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxWcH/AoUClfYYbYZYaoI
spQiFQiZEdniE3W/36GKtfJok4ur1Aogb/q99KvfQxFGkH+aLbTgXxJlTqrlmfWk
Kj4uVUecQl2OHOuEM6AVFyK6S4xdTjWS7TKMGIVe4LDQCAsFidgcYbcVrAhQ+s1s
eAOhlfrKMzVgRQ0KsJkn60SoSbVP6RyRfu+QQu24GfNtD8SzN8y0adB1PYXGVWmr
WW8+MqfZ1WIkn+NWW5bn3AEz8AYjQC66EvcWhlAWmyyBuUjIoNhpIgPHp6Vm7s+a
oPvw/VXwDX8NzpN0XYI+eVpsgClWtJ+HUcCSeuExTxrWu7Bewp6MMLeCjvi/lPpe
zKRDgnw=
=hx4k
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSHIsUACgkQJNaLcl1U
h9AbDQf+OnspdI5uW+X7ObBdB7KvPAXzDd7rMsXOTdp13bciSmaOzl74f0jPNWYU
GVo3a84eIU0YsdBP7M9+42vyUDQctgoBa7yyxZ+hW8gZQbXwgOZGmvWMncankm9n
hTlUbuLiowPzzjLERMDS0T2iJF0aFG7eB8Xghk/Su38HOCJI6fBx7sQlvt+aFK6J
/WzUuAqHng+6T7FHqxerGz/XIfvnRdS8qC9FZ7ySurmopn2AGY4YlifSGmSlPuFt
MM+nGNTOYn8scBAPRQlVCOwv7XOg6XqEvP5UNe8KpKN1rHfgP/B0X3ZbyE58bpPI
lqZzTXmY/dWD27FUc+3779EGLZ+L8w==
=PyzM
-----END PGP SIGNATURE-----
regmap: Merge up v6.4-rc6
The fix for maple tree RCU locking on sync is a dependency for the
block sync code for the maple tree.
Simple tests that cover basic raw I/O, plus basic coverage of cache sync
since the caches generate bulk I/O with raw register maps. This could be
more comprehensive but it is good for testing generic code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230610-regcache-raw-kunit-v1-2-583112cd28ac@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
bool is the most sensible return value for a yes/no return. Also
add __init as this funtion is only called from the early boot code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230531125535.676098-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that
resolve a number of reported issues. Included in here are:
- iio driver fixes
- fpga driver fixes
- test_firmware bugfixes
- fastrpc driver tiny bugfixes
- MAINTAINERS file updates for some subsystems
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZHxDNg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl1ywCg0uz+E/GYKx5cP9chPFmbbaFwxH4AnRpn/kIH
xz6nbAqSf7CBbtxmED11
=4J1c
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that
resolve a number of reported issues. Included in here are:
- iio driver fixes
- fpga driver fixes
- test_firmware bugfixes
- fastrpc driver tiny bugfixes
- MAINTAINERS file updates for some subsystems
All of these have been in linux-next this past week with no reported
issues"
* tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (34 commits)
test_firmware: fix the memory leak of the allocated firmware buffer
test_firmware: fix a memory leak with reqs buffer
test_firmware: prevent race conditions by a correct implementation of locking
firmware_loader: Fix a NULL vs IS_ERR() check
MAINTAINERS: Vaibhav Gupta is the new ipack maintainer
dt-bindings: fpga: replace Ivan Bornyakov maintainership
MAINTAINERS: update Microchip MPF FPGA reviewers
misc: fastrpc: reject new invocations during device removal
misc: fastrpc: return -EPIPE to invocations on device removal
misc: fastrpc: Reassign memory ownership only for remote heap
misc: fastrpc: Pass proper scm arguments for secure map request
iio: imu: inv_icm42600: fix timestamp reset
iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
iio: dac: mcp4725: Fix i2c_master_send() return value handling
iio: accel: kx022a fix irq getting
iio: bu27034: Ensure reset is written
iio: dac: build ad5758 driver when AD5758 is selected
iio: addac: ad74413: fix resistance input processing
iio: light: vcnl4035: fixed chip ID check
...
Here are 2 small driver core cacheinfo fixes for 6.4-rc5 that resolve a
number of reported issues with that file. These changes have been in
linux-next this past week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZHxChg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykrLACeJBLCDThdooct8G/7MzfpJhFcjSYAn1/EhJDA
GxgOmZrsB1HcO3Bo587a
=Cucq
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core cacheinfo fixes for 6.4-rc5 that
resolve a number of reported issues with that file. These changes have
been in linux-next this past week with no reported problems"
* tag 'driver-core-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: cacheinfo: Update cpu_map_populated during CPU Hotplug
drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug
The current behaviour around cache_only is slightly inconsistent,
most paths will only check cache_only if cache_bypass is false,
and will return -EBUSY if a read attempts to go to the hardware
whilst cache_only is true. However, a couple of paths will not check
cache_only at all. The most notable of these being regmap_raw_read
which will check cache_only in the case it processes the transaction
one register at a time, but not in the case it handles them as a
block. In the typical case a device has been put into cache_only
whilst powered down this can cause physical reads to happen whilst the
device is unavailable.
Add a check in regmap_raw_read and move the check in regmap_noinc_read,
adding a check for cache_bypass, such that all paths are covered and
consistent.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230601101036.1499612-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Typically handle_post_irq is going to be used to manage some
additional chip specific hardware operations required on each IRQ,
these are very likely to want the chip to be resumed. For example the
current in tree user max77620 uses this to toggle a global mask bit,
which would obviously want the device resumed. It is worth noting this
device does not specify the runtime_pm flag in regmap_irq_chip, so
there is no actual issue.
Move the callback to before the pm_runtime_put, so it will be called
whilst the device is still resumed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230601101036.1499612-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Until commit 5c2712387d ("cacheinfo: Fix LLC is not exported through
sysfs"), cacheinfo called populate_cache_leaves() for CPU coming online
which let the arch specific functions handle (at least on x86)
populating the shared_cpu_map. However, with the changes in the
aforementioned commit, populate_cache_leaves() is not called when a CPU
comes online as a result of hotplug since last_level_cache_is_valid()
returns true as the cacheinfo data is not discarded. The CPU coming
online is not present in shared_cpu_map, however, it will not be added
since the cpu_cacheinfo->cpu_map_populated flag is set (it is set in
populate_cache_leaves() when cacheinfo is first populated for x86)
This can lead to inconsistencies in the shared_cpu_map when an offlined
CPU comes online again. Example below depicts the inconsistency in the
shared_cpu_list in cacheinfo when CPU8 is offlined and onlined again on
a 3rd Generation EPYC processor:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
9-15,136-143
Clear the flag when the CPU is removed from shared_cpu_map when
cache_shared_cpu_map_remove() is called during CPU hotplug. This will
allow cache_shared_cpu_map_setup() to add the CPU coming back online in
the shared_cpu_map. Set the flag again when the shared_cpu_map is setup.
Following are results of performing the same test as described above with
the changes:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
8,136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
8-15,136-143
Fixes: 5c2712387d ("cacheinfo: Fix LLC is not exported through sysfs")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-3-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While building the shared_cpu_map, check if the cache level and cache
type matches. On certain systems that build the cache topology based on
the instance ID, there are cases where the same ID may repeat across
multiple cache levels, leading inaccurate topology.
In event of CPU offlining, the cache_shared_cpu_map_remove() does not
consider if IDs at same level are being compared. As a result, when same
IDs repeat across different cache levels, the CPU going offline is not
removed from all the shared_cpu_map.
Below is the output of cache topology of CPU8 and it's SMT sibling after
CPU8 is offlined on a dual socket 3rd Generation AMD EPYC processor
(2 x 64C/128T) running kernel release v6.3:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
CPU8 is removed from index0 (L1i) but remains in the shared_cpu_list of
index1 (L1d) and index2 (L2). Since L1i, L1d, and L2 are shared by the
SMT siblings, and they have the same cache instance ID, CPU 2 is only
removed from the first index with matching ID which is index1 (L1i) in
this case. With this fix, the results are as expected when performing
the same experiment on the same system:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
When rebuilding topology, the same problem appears as
cache_shared_cpu_map_setup() implements a similar logic. Consider the
same 3rd Generation EPYC processor: CPUs in Core 1, that share the L1
and L2 caches, have L1 and L2 instance ID as 1. For all the CPUs on
the second chiplet, the L3 ID is also 1 leading to grouping on CPUs from
Core 1 (1, 17) and the entire second chiplet (8-15, 24-31) as CPUs
sharing one cache domain. This went undetected since x86 processors
depended on arch specific populate_cache_leaves() method to repopulate
the shared_cpus_map when CPU came back online until kernel release
v6.3-rc5.
Fixes: 198102c910 ("cacheinfo: Fix shared_cpu_map to handle shared caches at different levels")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-2-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Usage of 'attr' and 'name' in the context of a sysfs attribute
definition are confusing because those read as being related to:
struct attribute .name
Rename 'name' to 'property' in preparation for renaming 'struct
node_hmem_attr' to a more generic name that can be used in more contexts
('struct access_coordinate'), and not be confused with 'struct
attribute'.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168332213518.2189163.18377767521423011290.stgit@djiang5-mobl3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The isa_dev->dev.platform_data is initialized with incoming
parameter isa_driver. After it isa_dev->dev.platform_data is
checked for NULL, but incoming parameter isa_driver is not
NULL since it is dereferenced many times before this check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20230517125025.434005-1-VEfanov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The most important fix here is for missing dropping of the RCU read lock
when syncing maple tree register caches, the physical devices I have
that use the code don't do any syncing so I'd only ever tested this with
virtual devices and missed the fact that we need to drop the lock in
order to write to buses that need to sleep. Otherwise there's a fix for
an edge case when splitting up large batch writes which has been lurking
for a long time, a check to make sure nobody writes new drivers with a
bug that was found in several SoundWire drivers and a tweak to the way
the new kunit tests are enabled to ensure they don't cause regmap to be
enabled when it wouldn't otherwise be.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmR15dQACgkQJNaLcl1U
h9BGKgf+NFD98ZNPsvOoFqAdG33yTDWISTf8FtIakM074vhz0xrBTFolqf/wmBGF
8VEabgfpmLSyuGEizjK/YLDK4f143XBgivyXUH04vGeAQUx4MfBaf0DSxBlQLh4K
K3LebH5QNQqdv9Qx7xMy7Y06r3KiQUxUvM8AINukspY0pmY8LtxyGLvv8T3kSpjz
WU28umwPrNsr36TcSuowncvZmMJ7Y1kSEnNjer1cdVlJVn4cFzkl/Sashmy8Rg3g
5Qmbg6Kuc6mLetoshtsculYntoLUJeCt6oX01Iq3cxVqkNi+mpOgwMOgjFFlwtrc
fela1GXUFEKe31FKyQPE0DRKv697eg==
=iAaD
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"The most important fix here is for missing dropping of the RCU read
lock when syncing maple tree register caches, the physical devices I
have that use the code don't do any syncing so I'd only ever tested
this with virtual devices and missed the fact that we need to drop the
lock in order to write to buses that need to sleep.
Otherwise there's a fix for an edge case when splitting up large batch
writes which has been lurking for a long time, a check to make sure
nobody writes new drivers with a bug that was found in several
SoundWire drivers and a tweak to the way the new kunit tests are
enabled to ensure they don't cause regmap to be enabled when it
wouldn't otherwise be"
* tag 'regmap-fix-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: Drop the RCU read lock while syncing registers
regmap: sdw: check for invalid multi-register writes config
regmap: Account for register length when chunking
regmap: REGMAP_KUNIT should not select REGMAP
Move the pm_suspend_target_state definition for CONFIG_SUSPEND
unset from the wakeup code into the headers so as to allow it
to still be used elsewhere when CONFIG_SUSPEND is not set.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, while calculating residency and latency values, right
operands may overflow if resulting values are big enough.
To prevent this, albeit unlikely case, play it safe and convert
right operands to left ones' type s64.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 30f604283e ("PM / Domains: Allow domain power states to be read from DT")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently we use the normal single register write function to load the
default values into the cache, resulting in a large number of reallocations
when there are blocks of registers as we extend the memory region we are
using to store the values. Instead scan through the list of defaults for
blocks of adjacent registers and do a single allocation and insert for each
such block. No functional change.
We do not take advantage of the maple tree preallocation, this is purely at
the regcache level. It is not clear to me yet if the maple tree level would
help much here or if we'd have more overhead from overallocating and then
freeing maple tree data.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230523-regcache-maple-load-defaults-v1-1-0c04336f005d@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Unfortunately the maple tree requires us to explicitly lock it so we need
to take the RCU read lock while iterating. When syncing this means that we
end up trying to write out register values while holding the RCU read lock
which triggers lockdep issues since that is an atomic context but most
buses can't be used in atomic context. Pause the iteration and drop the
lock for each register we check to avoid this.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230523-regcache-maple-sync-lock-v1-1-530e4d68dfab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire code as it is only supports Bulk register writes and
it does not support multi-register writes.
Any drivers that set can_multi_write and use regmap_multi_reg_write() will
easily endup with programming the hardware incorrectly without any errors.
So, add this check in bus code to be able to validate the drivers config.
Fixes: 522272047d ("regmap: sdw: Remove 8-bit value size restriction")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154747.5429-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When class_dev_iter is initialized, the reference count for the subsys
private structure is incremented, but never decremented, causing a
memory leak over time. To resolve this, save off a pointer to the
internal structure into the class_dev_iter structure and then when the
iterator is finished, drop the reference count.
Reported-and-tested-by: syzbot+e7afd76ad060fa0d2605@syzkaller.appspotmail.com
Fixes: 7b884b7f24 ("driver core: class.c: convert to only use class_to_subsys")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/2023051610-stove-condense-9a77@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when regmap_raw_write() splits the data, it uses the
max_raw_write value defined for the bus. For any bus that includes
the target register address in the max_raw_write value, the chunked
transmission will always exceed the maximum transmission length.
To avoid this problem, subtract the length of the register and the
padding from the maximum transmission.
Signed-off-by: Jim Wylder <jwylder@google.com
Link: https://lore.kernel.org/r/20230517152444.3690870-2-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org
Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>:
This is a straightforward patch series, mostly just removing a bunch
of old features that were only used by a handful of drivers.
- 1/4 and 2/4 remove unused, deprecated functionality
- 3/4 makes the behavior of .handle_mask_sync() a bit more consistent
w.r.t. mask and unmask registers, to aid maintainability.
- 4/4 removes now-unused "inverted mask/unmask" compatibility code.
Regmap's stride is used for MMIO regmaps to check the correctness of
reg_width. However, it's acceptable to pass an empty config->reg_stride,
in that case the actual stride used is 1.
There are valid cases now to pass an empty stride, when using
down/upshifting of register address. In this case, the stride value
loses its sense, so ignore the reg_width when the stride isn't set.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com
Link: https://lore.kernel.org/r/20230511142735.316445-1-maxime.chevallier@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org
All users must now specify .mask_unmask_non_inverted = true to
ensure they are using the expected semantics: 1s disable IRQs
in the mask registers, and enable IRQs in the unmask registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230511091342.26604-5-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
If a .handle_mask_sync() callback is provided it supersedes all
inbuilt handling of mask registers, and judging by the commit
69af4bcaa0 ("regmap-irq: Add handle_mask_sync() callback") it
is intended to completely replace all default IRQ masking logic.
The implementation has two minor inconsistencies, which can be
fixed without breaking compatibility:
(1) mask_base must be set to enable .handle_mask_sync(), even
though mask_base is otherwise unused. This is easily fixed
because mask_base is already optional.
(2) Unmask registers aren't accounted for -- they are part of
the default IRQ masking logic and are just a bit-inverted
version of mask registers. It would be a bad idea to allow
them to be used at the same time as .handle_mask_sync(),
as the result would be confusing and unmaintainable, so
make sure this can't happen.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230511091342.26604-4-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by:
1. making REGMAP visible if CONFIG_KUNIT_ALL_TESTS is enabled,
2. making REGMAP_KUNIT depend on REGMAP instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable REGMAP and its test suite on a system where REGMAP is not enabled
by default.
Fixes: 2238959b6a ("regmap: Add some basic kunit tests")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org
Link: https://lore.kernel.org/r/b0a5dbb17c1d5ea482e052e585ae83bb69c48806.1682516005.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org
Remove the map parameter from the struct regmap_irq_chip callback
handle_mask_sync() because it can be passed via the irq_drv_data
parameter instead. The gpio-104-dio-48e driver is the only consumer of
this callback and is thus updated accordingly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com
Link: https://lore.kernel.org/r/1f44fb0fbcd3dccea3371215b00f1b9a956c1a12.1679323449.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----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=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
This is a much bigger change for regmap than is normal, the main things
being the addition of some KUnit coverage and a maple tree based
register cache which longer term is likely to replace the rbtree cache
except possibly for very small register maps. While it's complete
overkill for most applications the code for maple trees is there and
there are some larger, sparser devices where the data structure is a
better fit.
The maple tree support is still a work in progress but already useful,
there's some conversions of drivers ready to go after the merge window.
- Support for shifting register addresses up as well as down, there's a
use cases with memory mapped MDIO.
- Refactoring of the type configuration in regmap-irq to allow access
to driver data in the handler, needed by some GPIO devices.
- Some initial KUnit coverage, the bulk of the driver facing API is
covered but there's holes and things like the data marshalling for
bytestream buses are just not covered in the slightest.
- Removal of the compressed cache type, it had zero users and was
getting in the way of KUnit.
- Addition of a maple tree based register cache, there's more work to
do but it's already useful for some devices with a flatter data
structure than rbtree and getting to use all the optimisation work
Liam is doing.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGe7QACgkQJNaLcl1U
h9BNSwf9ElqCWZgVGjMoF4b5+1M0rD6jQXbWshwRYjnvVIBaMtTXuCIZmzdmV6pH
oQTiDaTCiZGQVne3Cobncf0Pk1FTtuE3IL39CB5X355cqrkMOOxw57NYufDhhQTk
UJNTORbHPZGLOmLigVeK5nVFyGUTcSt9s9Haqz1S85Ao3rnXMw9IrC5L1QAv73zQ
pNQTLOdZDyg+vdW5Yuc0sVY5PnmVLIF5abI6E1MXumCLyQ8wS2Px1fUYXnQHmtJ1
2pZFYoqjxxIfObzC1SIsZFh0lkDdPe7WBeSKsGORhWiiCY5nYba1CiZ5DFNWR8hf
hJkxbALhdk6Iksvz0X14nAP6ESv66A==
=1hr2
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much bigger change for regmap than is normal, the main
things being the addition of some KUnit coverage and a maple tree
based register cache which longer term is likely to replace the rbtree
cache except possibly for very small register maps.
While it's complete overkill for most applications the code for maple
trees is there and there are some larger, sparser devices where the
data structure is a better fit.
The maple tree support is still a work in progress but already useful,
there's some conversions of drivers ready to go after the merge
window.
Summary:
- Support for shifting register addresses up as well as down, there's
a use cases with memory mapped MDIO.
- Refactoring of the type configuration in regmap-irq to allow access
to driver data in the handler, needed by some GPIO devices.
- Some initial KUnit coverage, the bulk of the driver facing API is
covered but there's holes and things like the data marshalling for
bytestream buses are just not covered in the slightest.
- Removal of the compressed cache type, it had zero users and was
getting in the way of KUnit.
- Addition of a maple tree based register cache, there's more work to
do but it's already useful for some devices with a flatter data
structure than rbtree and getting to use all the optimisation work
Liam is doing"
* tag 'regmap-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: allow upshifting register addresses before performing operations
regmap: Pass irq_drv_data as a parameter for set_type_config()
regmap: Use mas_walk() instead of mas_find()
regmap: Fix double unlock in the maple cache
regmap: Add maple tree based register cache
regmap: Factor out single value register syncing
regmap: Add some basic kunit tests
regmap: Add RAM backed register map
regmap: Removed compressed cache support
regmap: Support paging for buses with reg_read()/reg_write()
regmap: Clarify error for unknown cache types
regmap: Handle sparse caches in the default sync
regmap: add a helper to translate the register address
regmap: cache: Silence checkpatch warning
regmap: cache: Return error in cache sync operations for REGCACHE_NONE
regmap-irq: Place kernel doc of struct regmap_irq_chip in order
regmap-irq: Add no_status support
regmap: sdw: Remove 8-bit value size restriction
regmap: sdw: Update misleading comment
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
device_property functions do not modify the device pointer passed to them.
The underlying of_device and fwnode_ functions actually already take
const * arguments. Mark the parameter constant to simplify conversion
from of_property to device_property functions, and to let the calling code
use const device pointers where possible.
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230419164127.3773278-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document that some subsystems are still going to use device_rename for
the time being, so it is not a good idea to assume it's not used. Also
remove mentions of a plan to stop renaming net devices.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230406045435.19452-1-wedsonaf@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't require the use of dynamic debug (or modification of the kernel to
add a #define DEBUG to the top of this file) to get the printk message
about driver probe timing. This printk is only emitted when
initcall_debug is enabled on the kernel commandline, and it isn't
immediately obvious that you have to do something else to debug boot
timing issues related to driver probe. Add a comment too so it doesn't
get converted back to pr_debug().
Fixes: eb7fbc9fb1 ("driver core: Add missing '\n' in log messages")
Cc: stable <stable@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230412225842.3196599-1-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The crypto dependencies for the firmwware loader are incomplete,
in particular a built-in FW_LOADER fails to link against a modular
crypto hash driver:
ld.lld: error: undefined symbol: crypto_alloc_shash
ld.lld: error: undefined symbol: crypto_shash_digest
ld.lld: error: undefined symbol: crypto_destroy_tfm
>>> referenced by main.c
>>> drivers/base/firmware_loader/main.o:(fw_log_firmware_info) in archive vmlinux.a
Rework this to use the usual 'select' from the driver module,
to respect the built-in vs module dependencies, and add a
more verbose crypto dependency to the debug option to prevent
configurations that lead to a link failure.
Fixes: 02fe26f253 ("firmware_loader: Add debug message with checksum for FW file")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230414080329.76176-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having helped an user recently figure out why the customized path being
specified was not taken into account landed on a subtle difference
between using:
echo "/xyz/firmware" > /sys/module/firmware_class/parameters/path
which inserts an additional newline which is passed as is down to
fw_get_filesystem_firmware() and ultimately kernel_read_file_from_path()
and fails.
Strip off \n from the customized firmware path such that users do not
run into these hard to debug situations.
Link: https://lore.kernel.org/all/20230402135423.3235-1-f.fainelli@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230413191757.1949088-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cache information can be extracted from either a Device Tree(DT),
the PPTT ACPI table, or arch registers (clidr_el1 for arm64).
When the DT is used but no cache properties are advertised, the current
code doesn't correctly fallback to using arch information. The changes
fixes the same and also assuse the that L1 data/instruction caches
are private and L2/higher caches are shared when the cache information
is missing in DT/ACPI and is derived form clidr_el1/arch registers.
Currently the cacheinfo is built from the primary CPU prior to secondary
CPUs boot, if the DT/ACPI description contains cache information.
However, if not present, it still reverts to the old behavior, which
allocates the cacheinfo memory on each secondary CPUs which causes
RT kernels to triggers a "BUG: sleeping function called from invalid
context".
The changes here attempts to enable automatic detection for RT kernels
when no DT/ACPI cache information is available, by pre-allocating
cacheinfo memory on the primary CPU.
-----BEGIN PGP SIGNATURE-----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=4hhJ
-----END PGP SIGNATURE-----
Merge tag 'cacheinfo-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next
Sudeep writes:
cacheinfo and arch_topology updates for v6.4
The cache information can be extracted from either a Device Tree(DT),
the PPTT ACPI table, or arch registers (clidr_el1 for arm64).
When the DT is used but no cache properties are advertised, the current
code doesn't correctly fallback to using arch information. The changes
fixes the same and also assuse the that L1 data/instruction caches
are private and L2/higher caches are shared when the cache information
is missing in DT/ACPI and is derived form clidr_el1/arch registers.
Currently the cacheinfo is built from the primary CPU prior to secondary
CPUs boot, if the DT/ACPI description contains cache information.
However, if not present, it still reverts to the old behavior, which
allocates the cacheinfo memory on each secondary CPUs which causes
RT kernels to triggers a "BUG: sleeping function called from invalid
context".
The changes here attempts to enable automatic detection for RT kernels
when no DT/ACPI cache information is available, by pre-allocating
cacheinfo memory on the primary CPU.
* tag 'cacheinfo-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
The cache information can be extracted from either a Device
Tree (DT), the PPTT ACPI table, or arch registers (clidr_el1
for arm64).
The clidr_el1 register is used only if DT/ACPI information is not
available. It does not states how caches are shared among CPUs.
Add a use_arch_cache_info field/function to identify when the
DT/ACPI doesn't provide cache information. Use this information
to assume L1 caches are privates and L2 and higher are shared among
all CPUs.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230414081453.244787-5-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
fetch_cache_info() tries to get the number of cache leaves/levels
for each CPU in order to pre-allocate memory for cacheinfo struct.
Allocating this memory later triggers a:
'BUG: sleeping function called from invalid context'
in PREEMPT_RT kernels.
If there is no cache related information available in DT or ACPI,
fetch_cache_info() fails and an error message is printed:
'Early cacheinfo failed, ret = ...'
Not having cache information should be a valid configuration.
Remove the error message if fetch_cache_info() fails with -ENOENT.
Suggested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/20230404-hatred-swimmer-6fecdf33b57a@spud/
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-4-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If a Device Tree (DT) is used, the presence of cache properties is
assumed. Not finding any is not considered. For arm64 platforms,
cache information can be fetched from the clidr_el1 register.
Checking whether cache information is available in the DT
allows to switch to using clidr_el1.
init_of_cache_level()
\-of_count_cache_leaves()
will assume there a 2 cache leaves (L1 data/instruction caches), which
can be different from clidr_el1 information.
cache_setup_of_node() tries to read cache properties in the DT.
If there are none, this is considered a success. Knowing no
information was available would allow to switch to using clidr_el1.
Fixes: de0df442ee ("cacheinfo: Check 'cache-unified' property to count cache leaves")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/all/20230404-hatred-swimmer-6fecdf33b57a@spud/
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-3-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If there is no ACPI/DT information, it is assumed that L1 caches
are private and L2 (and higher) caches are shared. A cache is
'shared' between two CPUs if it is accessible from these two
CPUs.
Each CPU owns a representation (i.e. has a dedicated cacheinfo struct)
of the caches it has access to. cache_leaves_are_shared() tries to
identify whether two representations are designating the same actual
cache.
In cache_leaves_are_shared(), if 'this_leaf' is a L2 cache (or higher)
and 'sib_leaf' is a L1 cache, the caches are detected as shared as
only this_leaf's cache level is checked.
This is leads to setting sib_leaf as being shared with another CPU,
which is incorrect as this is a L1 cache.
Check 'sib_leaf->level'. Also update the comment as the function is
called when populating 'shared_cpu_map'.
Fixes: f16d1becf9 ("cacheinfo: Use cache identifiers to check if the caches are shared if available")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just
implicitly including other includes, and is no longer needed. Update the
includes to use of.h instead of of_device.h.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-10-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Recent work enables cacheinfo memory for secondary CPUs to be allocated
early, while still running on the primary CPU. That allows cacheinfo
memory to be allocated safely on RT kernels. To make that work, the
number of cache levels/leaves must be defined in the device tree or ACPI
tables. Further work adds a path for early detection of the number of
cache levels/leaves, which makes it possible to allocate the cacheinfo
memory early without requiring extra DT/ACPI information.
This patch addresses a specific issue with ACPI systems with no PPTT. In
that case, parse_acpi_topology() returns an error code, which in turn
makes init_cpu_topology() return early, before fetch_cache_info() is
called. In that case, the early cache level detection doesn't run.
The solution is to simply remove the "return" statement and let the code
flow fall through to calling fetch_cache_info().
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/all/dea94484-797f-3034-7b86-6d88801c0d91@arm.com/
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230412185759.755408-4-rrendec@redhat.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch gives architecture specific code the ability to initialize
the cache level and allocate cacheinfo memory early, when cache level
initialization runs on the primary CPU for all possible CPUs.
This is part of a patch series that attempts to further the work in
commit 5944ce092b ("arch_topology: Build cacheinfo from primary CPU").
Previously, in the absence of any DT/ACPI cache info, architecture
specific cache detection and info allocation for secondary CPUs would
happen in non-preemptible context during early CPU initialization and
trigger a "BUG: sleeping function called from invalid context" splat on
an RT kernel.
More specifically, this patch adds the early_cache_level() function,
which is called by fetch_cache_info() as a fallback when the number of
cache leaves cannot be extracted from DT/ACPI. In the default generic
(weak) implementation, this new function returns -ENOENT, which
preserves the original behavior for architectures that do not implement
the function.
Since early detection can get the number of cache leaves wrong in some
cases*, additional logic is added to still call init_cache_level() later
on the secondary CPU, therefore giving the architecture specific code an
opportunity to go back and fix the initial guess. Again, the original
behavior is preserved for architectures that do not implement the new
function.
* For example, on arm64, CLIDR_EL1 detection works only when it runs on
the current CPU. In other words, a CPU cannot detect the cache depth
for any other CPU than itself.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230412185759.755408-2-rrendec@redhat.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Similar to the existing reg_downshift mechanism, that is used to
translate register addresses on busses that have a smaller address
stride, it's also possible to want to upshift register addresses.
Such a case was encountered when network PHYs and PCS that usually sit
on a MDIO bus (16-bits register with a stride of 1) are integrated
directly as memory-mapped devices. Here, the same register layout
defined in 802.3 is used, but the register now have a larger stride.
Introduce a mechanism to also allow upshifting register addresses.
Re-purpose reg_downshift into a more generic, signed reg_shift, whose
sign indicates the direction of the shift. To avoid confusion, also
introduce macros to explicitly indicate if we want to downshift or
upshift.
For bisectability, change any use of reg_downshift to use reg_shift.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230407152604.105467-1-maxime.chevallier@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Assignments from pointer variables of type (void *) do not require
explicit type casts, so remove such type cases from the code in
drivers/base/power/main.c where applicable.
Signed-off-by: Li zeming <zeming@nfschina.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from William Breathitt Gray <william.gray@linaro.org>:
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
A patch to pass irq_drv_data as a parameter for struct regmap_irq_chip
set_type_config() is included. This is needed by the
idio_24_set_type_config() and ws16c48_set_type_config() callbacks in
order to update the type configuration on their respective devices.
For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.
Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.
[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]
For drivers/base/ portion:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: rcu <rcu@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 2987557f52 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Liam recommends using mas_walk() instead of mas_find() for our use case so
let's do that, it avoids some minor overhead associated with being able to
restart the operation which we don't need since we do a simple search.
Suggested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230403-regmap-maple-walk-fine-v2-1-c07371c8a867@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Doing the dance to drop the maple tree's internal spinlock means we need
multiple exit paths in our error handling.
Reported-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230403-regmap-maple-unlock-v1-1-89998991b16c@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The add_dev and remove_dev callbacks in struct class_interface currently
pass in a pointer back to the class_interface structure that is calling
them, but none of the callback implementations actually use this pointer
as it is pointless (the structure is known, the driver passed it in in
the first place if it is really needed again.)
So clean this up and just remove the pointer from the callbacks and fix
up all callback functions.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: Cai Xinchen <caixinchen1@huawei.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/2023040250-pushover-platter-509c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct class pointer in struct class_interface is never modified, so
mark it as const so that no one accidentally tries to modify it in the
future.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/2023040249-handball-gruffly-5da7@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the class code is cleaned up to not modify the class pointer
registered with it, change class_register() to take a const * to allow
the structure to be placed into read-only memory.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/2023040248-customary-release-4aec@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct class callback, class_release(), is only called in 2 places,
the pcmcia cardservices code, and in the class driver core code. Both
places it is safe to mark the structure as a const *, to allow us to
in the future mark all struct class usages as constant and move into
read-only memory.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/2023040248-outrage-obsolete-5a9a@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device_create() and device_create_with_groups() function comments
incorrectly state that they only work with a struct class that was
created using class_create(), but that is not true now and I am not sure
if it ever was. So just remove the comment as it's not needed now.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/2023040218-scouts-unplowed-24d2@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current state of the art for sparse register maps is the
rbtree cache. This works well for most applications but isn't
always ideal for sparser register maps since the rbtree can get
deep, requiring a lot of walking. Fortunately the kernel has a
data structure intended to address this very problem, the maple
tree. Provide an initial implementation of a register cache
based on the maple tree to start taking advantage of it.
The entries stored in the maple tree are arrays of register
values, with the maple tree keys holding the register addresses.
We store data in host native format rather than device native
format as we do for rbtree, this will be a benefit for devices
where we don't marshal data within regmap and simplifies the code
but will result in additional CPU overhead when syncing the cache
on devices where we do marshal data in regmap.
This should work well for a lot of devices, though there's some
additional areas that could be looked at such as caching the
last accessed entry like we do for rbtree and trying to minimise
the maple tree level locking. We should also use bulk writes
rather than single register writes when resyncing the cache where
possible, even if we don't store in device native format.
Very small register maps may continue to to better with rbtree
longer term.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-2-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to support sparse caches that don't store data in raw format
factor out the parts of the raw block sync implementation that deal with
writing a single register via _regmap_write().
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-1-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot found that we had forgotten to unregister the lock_class_key when
using it in commit dcfbb67e48 ("driver core: class: use lock_class_key
already present in struct subsys_private") so fix that up and correctly
release it when done.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reported-and-tested-by: <syzbot+41d665317c811d4d88aa@syzkaller.appspotmail.com>
Fixes: dcfbb67e48 ("driver core: class: use lock_class_key already present in struct subsys_private")
Link: https://lore.kernel.org/r/2023040126-blandness-duckling-bd55@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing outside of drivers/base/core.c uses sysfs_dev_char_kobj, so
make it static and document what it is used for so we remember it the
next time we touch it 15 years from now.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230331093318.82288-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing outside of drivers/base/core.c uses sysfs_dev_block_kobj, so
make it static and document what it is used for so we remember it the
next time we touch it 15 years from now.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230331093318.82288-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_kobj field in struct class is now only written to, but never
read from, so it can be removed as it is useless.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230331093318.82288-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a dev_t is set in a struct device, an symlink in /sys/dev/ is
created for it either under /sys/dev/block/ or /sys/dev/char/ depending
on the device type.
The logic to determine this would trigger off of the class of the
object, and the kobj_type set in that location. But it turns out that
this deep nesting isn't needed at all, as it's either a choice of block
or "everything else" which is a char device. So make the logic a lot
more simple and obvious, and remove the incorrect comments in the code
that tried to document something that was not happening at all (it is
impossible to set class->dev_kobj to NULL as the class core prevented
that from happening.
This removes the only place that class->dev_kobj was being used, so
after this, it can be removed entirely.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230331093318.82288-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the last users of the subsystem private pointer in struct class
are gone, the pointer can be removed, as no one is using it. One step
closer to allowing struct class to be const and moved into read-only
memory.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230331093318.82288-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some classes (i.e. gpio), want to know if they have been registered or
not, and poke around in the class's internal structures to try to figure
this out. Because this is not really a good idea, provide a function
for classes to call to try to figure this out.
Note, this is racy as the state of the class could change at any moment
in time after the call is made, but as usually a class only wants to
know if it has been registered yet or not, it should be fairly safe to
use, and is just as safe as the previous "poke at the class internals"
check was.
Move the gpiolib code to use this function as proof that it works
properly.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230331093318.82288-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a number of places in core.c that need access to the private
subsystem structure of struct class, so move them to use
class_to_subsys() instead of accessing it directly.
This requires exporting class_to_subsys() out of class.c, but keeping it
local to the driver core.
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230331093318.82288-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the theory that it's better to make a start let's add some KUnit tests
for regmap. Currently this is a bit of a mess but it passes and hopefully
will at some point help catch problems. We provide very basic cover for
most of the core functionality that operates at the register level,
repeating each test for each cache type in order to exercise the caches.
There is no coverage of anything to do with the bulk operations at the bus
level or formatting for byte stream buses yet.
Each test creates it's own regmap since the cache structures are built
incrementally, meaning we gain coverage from the different access
patterns, and some of the tests cover different init scenarios.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regmap-kunit-v2-2-b208801dc2c8@kernel.org
Add a register map that is a simple array of memory, for use in
KUnit testing of the framework. This is not exposed in regmap.h
since I can't think of a non-test use case, it is purely for use
internally. To facilitate testing we track if registers have been
read or written to.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regmap-kunit-v2-1-b208801dc2c8@kernel.org
The compressed register cache support has assumptions that make it hard to
cover in testing, mainly that it requires raw registers defaults be
provided. Rather than either address these assumptions or leave it untested
by the forthcoming KUnit tests let's remove it, the use case is quite thin
and there are no current users.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regcache-lzo-v1-1-08c5d63e2a5e@kernel.org
Several SoC drivers use the same of-based mechanism to populate the machine
name. Therefore move this to the core and try to populate the machine name
in soc_device_register if it's not set yet.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/6dbdf458-9f46-613e-de58-b4a56a6cdd9f@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After entering 6.3-rc1 the LLC cacheinfo is not exported on our ACPI
based arm64 server. This is because the LLC cacheinfo is partly reset
when secondary CPUs boot up. On arm64 the primary cpu will allocate
and setup cacheinfo:
init_cpu_topology()
for_each_possible_cpu()
fetch_cache_info() // Allocate cacheinfo and init levels
detect_cache_attributes()
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // not valid, setup LLC
cache_setup_properties() // setup LLC
On secondary CPU boot up:
detect_cache_attributes()
populate_cache_leaves()
get_cache_type() // Get cache type from clidr_el1,
// for LLC type=CACHE_TYPE_NOCACHE
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // Valid and won't go to this branch,
// leave LLC's type=CACHE_TYPE_NOCACHE
The last_level_cache_is_valid() use cacheinfo->{attributes, fw_token} to
test it's valid or not, but populate_cache_leaves() will only reset
LLC's type, so we won't try to re-setup LLC's type and leave it
CACHE_TYPE_NOCACHE and won't export it through sysfs.
This patch tries to fix this by not re-populating the cache leaves if
the LLC is valid.
Fixes: 5944ce092b ("arch_topology: Build cacheinfo from primary CPU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230328114915.33340-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that class_to_subsys() can be used to get access to the internal
class private pointer, convert the remaining few places in class.c that
were accessing the pointer directly to use class_to_subsys() instead.
By doing this, the need for class_get() and class_put() goes away as no
one actually tries to increment the class structures anymore, only the
internal dynamic one.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230325194234.46588-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Much like what was done in commit 273afac615 ("driver core: bus:
implement bus_get/put() without the private pointer"), it is time to
move the driver core away from using the internal private pointer in
struct class in order to enable it to be always a constant and be placed
in read-only memory in the future.
First step in doing this is to create a helper function that turns a
'struct class' into 'struct subsys_private' called class_to_subsys().
class_to_subsys() walks the list of registered busses in the system and
finds the matching one based on the pointer to the class itself. As
this is a short list, and this function is not on any fast path, it
should not be noticable.
Implement class_get() and class_put() using this new helper function.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230325194234.46588-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct class should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
class to be moved to read-only memory.
While we are touching all class sysfs callbacks also mark the attribute
as constant as it can not be modified. The bonding code still uses this
structure so it can not be removed from the function callbacks.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steve French <sfrench@samba.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-cifs@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230325084537.3622280-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a build time equivalent of fw_devlink.sync_state=timeout so that
board specific kernels could enable it and not have to deal with setting
or cluttering the kernel commandline.
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230317205134.964098-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The class_unregister() and class_destroy() function should be taking a
const * to struct class, not just a *, so fix that up.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230325084526.3622123-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure sysfs_dev_char_kobj is local only to the driver core code,
so move it out of the global class.h file and into the internal base.h
file as no one else should be touching this symbol.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230327160319.513974-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit dcfbb67e48 ("driver core: class: use lock_class_key already
present in struct subsys_private") we removed the key parameter to the
function class_create() but forgot to remove it from the kerneldoc,
which causes a build warning. Fix that up by removing the key parameter
from the documentation as it is now gone.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: dcfbb67e48 ("driver core: class: use lock_class_key already present in struct subsys_private")
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230327081828.1087364-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error message printed when we fail to locate the cache type the map
requested says it can't find a compress type rather than a cache type,
fix that. Since the compressed type is the only one currently compiled
conditionally it's likely to be the missing type but that might not always
be true and is still unclear.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regcache-unknown-v1-1-80deecbf196b@kernel.org
In commit 37e98d9bed ("driver core: bus: move lock_class_key into
dynamic structure"), the lock_key variable moved out of struct bus_type
and into struct subsys_private, yet the documentation for it did not
move. Fix that up and place the documentation comment in the correct
location.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Fixes: 37e98d9bed ("driver core: bus: move lock_class_key into dynamic structure")
Link: https://lore.kernel.org/r/20230324090814.386654-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from Maxime Chevallier <maxime.chevallier@bootlin.com>:
This introduces a helper that factors out register rewriting, it
will be the basis for further work that will need cross tree
merges so is on a branch.
Register addresses passed to regmap operations can be offset with
regmap.reg_base and downshifted with regmap.reg_downshift.
Add a helper to apply both these operations and return the translated
address, that we can then use to perform the actual register operation
ont the underlying bus.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20230324093644.464704-2-maxime.chevallier@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from drivers/base/physical_location.h as
they are not needed.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230324122711.2664537-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from drivers/base/base.h as they are not
needed.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230324122711.2664537-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 37e98d9bed ("driver core: bus: move lock_class_key into
dynamic structure"), we moved the lock_class_key into the internal
structure shared by busses and classes, but only used it for buses.
Move the class code to use this structure as it is already present and
being allocated, instead of the statically allocated on-the-stack
variable that class_create() was using as part of a macro wrapper around
the core function call.
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230324100132.1633647-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fwnode parameter is not altered in the following APIs:
- fwnode_get_next_parent_dev()
- fwnode_is_ancestor_of()
- fwnode_graph_get_endpoint_count()
so constify them.
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230324112720.71315-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fwnode_get_phy_mode() does not modify the fwnode argument, merely
using it to obtain the phy-mode property value. Therefore, it can
be made const.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/E1pfdh9-00EQ8t-HB@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's funny to think about getting a reference count of a constant
structure pointer, but this locks into place the private data
"underneath" the struct bus_type() which is important to not go away
while we are working with the bus structure for some callbacks.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313182918.1312597-27-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bus_rescan_devices() function was missed in the previous change of
the bus_for_each* constant pointer changes, so fix it up now to take a
const * to struct bus_type.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313182918.1312597-25-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bus_register() is now safe to take a constant * to bus_type, so make
that change and mark the subsys_private bus_type * constant as well.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313182918.1312597-24-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct bus_type should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
bus_type to be moved to read-only memory.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hu Haowen <src.res@email.cn>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd
Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl
Reviewed-by: Alex Shi <alexs@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi
Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that all accesses of dev_root is through the bus_get_dev_root()
call, move the pointer out of struct bus_type and into the private
dynamic structure, subsys_private.
With this change, there is no modifiable portions of struct bus_type so
it can be marked as a constant structure and moved to read-only memory.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313182918.1312597-22-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions device_create() and device_create_with_groups() do not
modify the struct class passed into it, so enforce this by changing the
function parameters to be struct const class.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer to a struct class in a struct device should never be used to
change anything in that class. So mark it as constant to enforce this
requirement.
This requires a few minor changes to some internal driver core functions
to enforce the const * being used here now.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-11-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
