This implements operations related to merging sndbuf with peer DMB in
loopback-ism. The DMB won't be freed until no sndbuf is attached to it.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the local sndbuf shares the same physical memory with peer DMB,
the cursor update processing needs to be adapted to ensure that the
data to be consumed won't be overwritten.
So in this case, the fin_curs and sndbuf_space that were originally
updated after sending the CDC message should be modified to not be
update until the peer updates cons_curs.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the device used by SMC-D supports merging local sndbuf to peer DMB,
then create sndbuf descriptor and attach it to peer DMB once peer
token is obtained, and detach and free the sndbuf descriptor when the
connection is freed.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In some scenarios using Emulated-ISM device, sndbuf can share the same
physical memory region with peer DMB to avoid data copy from one side
to the other. In such case the sndbuf is only a descriptor that
describes the shared memory and does not actually occupy memory, it's
more like a ghost buffer.
+----------+ +----------+
| socket A | | socket B |
+----------+ +----------+
| |
+--------+ +--------+
| sndbuf | | DMB |
| desc | | desc |
+--------+ +--------+
| |
| +----v-----+
+--------------------------> memory |
+----------+
So here introduces three new SMC-D device operations to check if this
feature is supported by device, and to {attach|detach} ghost sndbuf to
peer DMB. For now only loopback-ism supports this.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the loopback-ism device is ready, add it to the SMC-D device list
as an ISMv2 device, and always keep it at the beginning to ensure it is
preferred for providing a shortcut for data transfer within the same
kernel.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since loopback-ism is not a PCI device, the PCI information fed back by
smc_nl_handle_smcd_dev() does not apply to loopback-ism. So currently
ignore loopback-ism when dumping SMC-D devices. The netlink function of
loopback-ism will be refactored when SMC netlink interface is updated.
Link: https://lore.kernel.org/r/caab067b-f5c3-490f-9259-262624c236b4@linux.ibm.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some operations are not supported by new introduced Emulated-ISM, so
mark them as optional and check if the device supports them when called.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This implements DMB (un)registration and data move operations of
loopback-ism device.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This implements operations related to IDs for the loopback-ism device.
loopback-ism uses an Extended GID that is a 128-bit GID instead of the
existing ISM 64-bit GID, and uses the CHID defined with the reserved
value 0xFFFF.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This introduces a kind of Emulated-ISM device named loopback-ism for
SMCv2.1. The loopback-ism device is currently exclusive for SMC usage,
and aims to provide an SMC shortcut for sockets within the same kernel,
leading to improved intra-OS traffic performance. Configuration of this
feature is managed through the config SMC_LO.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The struct 'ism_client' is specialized for s390 platform firmware ISM.
So replace it with 'void' to make SMCD DMB registration helper generic
for both Emulated-ISM and existing ISM.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "ids" variable is a pointer to "struct sctp_assoc_ids" and this
structure ends in a flexible array:
struct sctp_assoc_ids {
[...]
sctp_assoc_t gaids_assoc_id[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + size * count" in
the kmalloc() function.
Also, refactor the code adding the "ids_size" variable to avoid sizing
twice.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/PAXPR02MB724871DB78375AB06B5171C88B152@PAXPR02MB7248.eurprd02.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To enhance functionality, we now support reporting statistics through
the netdev-generic netlink (netdev-genl) queue stats interface. However,
this does not extend to all statistics, so a new field, qstat_offset,
has been introduced. This field determines which statistics should be
reported via netdev-genl queue stats.
Given that queue stats are retrieved individually per queue, it's
necessary for the virtnet_get_hw_stats() function to be capable of
fetching statistics for a specific queue.
As the document https://docs.kernel.org/next/networking/statistics.html#notes-for-driver-authors
We should not duplicate the stats which get reported via the netlink API in
ethtool. If the stats are for queue stat, that will not be reported by
ethtool -S.
python3 ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml
--dump qstats-get --json '{"scope": "queue"}'
[{'ifindex': 2,
'queue-id': 0,
'queue-type': 'rx',
'rx-bytes': 157844011,
'rx-csum-bad': 0,
'rx-csum-none': 0,
'rx-csum-unnecessary': 2195386,
'rx-hw-drop-overruns': 0,
'rx-hw-drop-ratelimits': 0,
'rx-hw-drops': 12964,
'rx-packets': 598929},
{'ifindex': 2,
'queue-id': 0,
'queue-type': 'tx',
'tx-bytes': 1938511,
'tx-csum-none': 0,
'tx-hw-drop-errors': 0,
'tx-hw-drop-ratelimits': 0,
'tx-hw-drops': 0,
'tx-needs-csum': 61263,
'tx-packets': 15515}]
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the last commit, we introduced some helpers for device stats.
And the drivers stats are realized by the open code.
This commit make the helpers to support driver stats.
Then we can have the unify helper for device and driver stats.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The key size of ethtool -S is controlled by this macro.
ETH_GSTRING_LEN 32
That includes the \0 at the end. So the max length of the key name must
is 31. But the length of the prefix "rx_queue_0_" is 11. If the queue
num is larger than 10, the length of the prefix is 12. So the
key name max is 19. That is too short. We will introduce some keys
such as "gso_packets_coalesced". So we should change the prefix
to "rx0_".
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The virtio-net device stats spec:
42f3899898
We introduce the relative feature and structures.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As the spec 42f3899898
Based on the description provided in the above specification, we have
enabled the virtio-net driver to support acquiring some response
information from the device via the CVQ (Control Virtqueue).
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/E1s0OH2-009hgx-Qw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/E1s0OGx-009hgr-NP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/E1s0OGs-009hgl-Jg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink as the interrupts are informing us about changes to the PCS
state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/E1s0OGn-009hgf-G6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We must initialize prune_proxy_timer before we attempt
a del_timer_sync() on it.
syzbot reported the following splat:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 11 Comm: kworker/u8:1 Not tainted 6.9.0-rc5-syzkaller-01199-gfc48de77d69d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: netns cleanup_net
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
assign_lock_key+0x238/0x270 kernel/locking/lockdep.c:976
register_lock_class+0x1cf/0x980 kernel/locking/lockdep.c:1289
__lock_acquire+0xda/0x1fd0 kernel/locking/lockdep.c:5014
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__timer_delete_sync+0x148/0x310 kernel/time/timer.c:1648
del_timer_sync include/linux/timer.h:185 [inline]
hsr_dellink+0x33/0x80 net/hsr/hsr_netlink.c:132
default_device_exit_batch+0x956/0xa90 net/core/dev.c:11737
ops_exit_list net/core/net_namespace.c:175 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:637
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
ODEBUG: assert_init not available (active state 0) object: ffff88806d3fcd88 object type: timer_list hint: 0x0
WARNING: CPU: 1 PID: 11 at lib/debugobjects.c:517 debug_print_object+0x17a/0x1f0 lib/debugobjects.c:514
Fixes: 5055cccfc2 ("net: hsr: Provide RedBox support (HSR-SAN)")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240426163355.2613767-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: dsa: microchip: use phylink_mac_ops for ksz driver
This four patch series switches the Microchip KSZ DSA driver to use
phylink_mac_ops support, and for this one we go a little further
beyond a simple conversion. This driver has four distinct cases:
lan937x
ksz9477
ksz8
ksz8830
Three of these cases are handled by shimming the existing DSA calls
through ksz_dev_ops, and the final case is handled through a
conditional in ksz_phylink_mac_config(). These can all be handled
with separate phylink_mac_ops.
To get there, we do a progressive conversion.
Patch 1 removes ksz_dev_ops' phylink_mac_config() method which is
not populated in any of the arrays - and is thus redundant.
Patch 2 switches the driver to use a common set of phylink_mac_ops
for all cases, doing the simple conversion to avoid the DSA shim.
Patch 3 pushes the phylink_mac_ops down to the first three classes
(lan937x, ksz9477, ksz8) adding an appropriate pointer to the
phylink_mac_ops to struct ksz_chip_data, and using that to
populate DSA's ds->phylink_mac_ops pointer. The difference between
each of these are the mac_link_up() method. mac_config() and
mac_link_down() remain common between each at this stage.
Patch 4 splits out ksz8830, which needs different mac_config()
handling, and thus means we have a difference in mac_config()
methods between the now four phylink_mac_ops structures.
Build tested only, with additional -Wunused-const-variable flag.
====================
Link: https://lore.kernel.org/r/ZivP/R1IwKEPb5T6@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert ksz_common to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1s0O7H-009gpq-IF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The phylink_mac_config function pointer member of struct ksz_dev_ops is
never initialised, so let's remove it to simplify the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1s0O7C-009gpk-Dh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZi9+AAAKCRDbK58LschI
g0nEAP487m7L0nLVriC2oIOWsi29tklW3etm6DO7gmGRGIHgrgEAnMyV1xBj3bGj
v6jJwDcybCym1hLx+1x1JCZ4eoAFswE=
=xbna
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the PTP programmable gpios to implement also PTP_PF_EXTTS
function. The pins can be configured to capture both of rising
and falling edge. Once the event is seen, then an interrupt is
generated and the LTC is saved in the registers.
On lan8814 only GPIO 3 can be configured for this.
This was tested using:
ts2phc -m -l 7 -s generic -f ts2phc.cfg
Where the configuration was the following:
---
[global]
ts2phc.pin_index 3
[eth0]
---
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: fix LED support for rtl8366
This series fixes the LED support for rtl8366. The existing code was not
tested in a device with switch LEDs and it was using a flawed logic.
The driver now keeps the default LED configuration if nothing requests a
different behavior. This may be enough for most devices. This can be
achieved either by omitting the LED from the device-tree or configuring
all LEDs in a group with the default state set to "keep".
The hardware trigger for LEDs in Realtek switches is shared among all
LEDs in a group. This behavior doesn't align well with the Linux LED
API, which controls LEDs individually. Once the OS changes the
brightness of a LED in a group still triggered by the hardware, the
entire group switches to software-controlled LEDs, even for those not
metioned in the device-tree. This shared behavior also prevents
offloading the trigger to the hardware as it would require an
orchestration between LEDs in a group, not currently present in the LED
API.
The assertion of device hardware reset during driver removal was removed
because it was causing an issue with the LED release code. Devres
devices are released after the driver's removal is executed. Asserting
the reset at that point was causing timeout errors during LED release
when it attempted to turn off the LED.
To: Linus Walleij <linus.walleij@linaro.org>
To: Alvin Šipraga <alsi@bang-olufsen.dk>
To: Andrew Lunn <andrew@lunn.ch>
To: Florian Fainelli <f.fainelli@gmail.com>
To: Vladimir Oltean <olteanv@gmail.com>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Changes in v2:
- Fixed commit message formatting
- Added GROUP to LED group enum values. With that, moved the code that
disables LED into a new function to keep 80-collumn limit.
- Dropped unused enable argument in rb8366rb_get_port_led()
- Fixed variable order in rtl8366rb_setup_led()
- Removed redundant led group test in rb8366rb_{g,s}et_port_led()
- Initialize ret as 0 in rtl8366rb_setup_leds()
- Updated comments related to LED blinking and setup
- Link to v1: https://lore.kernel.org/r/20240310-realtek-led-v1-0-4d9813ce938e@gmail.com
Changes in v1:
- Rebased on new relatek DSA drivers
- Improved commit messages
- Added commit to remove the reset assert during .remove
- Link to RFC: https://lore.kernel.org/r/20240106184651.3665-1-luizluca@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit introduces LED drivers for rtl8366rb, enabling LEDs to be
described in the device tree using the same format as qca8k. Each port
can configure up to 4 LEDs.
If all LEDs in a group use the default state "keep", they will use the
default behavior after a reset. Changing the brightness of one LED,
either manually or by a trigger, will disable the default hardware
trigger and switch the entire LED group to manually controlled LEDs.
Once in this mode, there is no way to revert to hardware-controlled LEDs
(except by resetting the switch).
Software triggers function as expected with manually controlled LEDs.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The necessity of asserting the reset on removal was previously
questioned, as DSA's own cleanup methods should suffice to prevent
traffic leakage[1].
When a driver has subdrivers controlled by devres, they will be
unregistered after the main driver's .remove is executed. If it asserts
a reset, the subdrivers will be unable to communicate with the hardware
during their cleanup. For LEDs, this means that they will fail to turn
off, resulting in a timeout error.
[1] https://lore.kernel.org/r/20240123215606.26716-9-luizluca@gmail.com/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This switch family supports four LEDs for each of its six ports. Each
LED group is composed of one of these four LEDs from all six ports. LED
groups can be configured to display hardware information, such as link
activity, or manually controlled through a bitmap in registers
RTL8366RB_LED_0_1_CTRL_REG and RTL8366RB_LED_2_3_CTRL_REG.
After a reset, the default LED group configuration for groups 0 to 3
indicates, respectively, link activity, link at 1000M, 100M, and 10M, or
RTL8366RB_LED_CTRL_REG as 0x5432. These configurations are commonly used
for LED indications. However, the driver was replacing that
configuration to use manually controlled LEDs (RTL8366RB_LED_FORCE)
without providing a way for the OS to control them. The default
configuration is deemed more useful than fixed, uncontrollable turned-on
LEDs.
The driver was enabling/disabling LEDs during port_enable/disable.
However, these events occur when the port is administratively controlled
(up or down) and are not related to link presence. Additionally, when a
port N was disabled, the driver was turning off all LEDs for group N,
not only the corresponding LED for port N in any of those 4 groups. In
such cases, if port 0 was brought down, the LEDs for all ports in LED
group 0 would be turned off. As another side effect, the driver was
wrongly warning that port 5 didn't have an LED ("no LED for port 5").
Since showing the administrative state of ports is not an orthodox way
to use LEDs, it was not worth it to fix it and all this code was
dropped.
The code to disable LEDs was simplified only changing each LED group to
the RTL8366RB_LED_OFF state. Registers RTL8366RB_LED_0_1_CTRL_REG and
RTL8366RB_LED_2_3_CTRL_REG are only used when the corresponding LED
group is configured with RTL8366RB_LED_FORCE and they don't need to be
cleaned. The code still references an LED controlled by
RTL8366RB_INTERRUPT_CONTROL_REG, but as of now, no test device has
actually used it. Also, some magic numbers were replaced by macros.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch elaborates on the use of PC by expanding the PC acronym,
explaining the units, and the relative position to which the offset
applies.
Signed-off-by: Dave Thaler <dthaler1968@googlemail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240426231126.5130-1-dthaler1968@gmail.com
Petr Machata says:
====================
mlxsw: Improve events processing performance
Amit Cohen writes:
Spectrum ASICs only support a single interrupt, it means that all the
events are handled by one IRQ (interrupt request) handler.
Currently, we schedule a tasklet to handle events in EQ, then we also use
tasklet for CQ, SDQ and RDQ. Tasklet runs in softIRQ (software IRQ)
context, and will be run on the same CPU which scheduled it. It means that
today we have one CPU which handles all the packets (both network packets
and EMADs) from hardware.
The existing implementation is not efficient and can be improved.
Measuring latency of EMADs in the driver (without the time in FW) shows
that latency is increased by factor of 28 (x28) when network traffic is
handled by the driver.
Measuring throughput in CPU shows that CPU can handle ~35% less packets
of specific flow when corrupted packets are also handled by the driver.
There are cases that these values even worse, we measure decrease of ~44%
packet rate.
This can be improved if network packet and EMADs will be handled in
parallel by several CPUs, and more than that, if different types of traffic
will be handled in parallel. We can achieve this using NAPI.
This set converts the driver to process completions from hardware via NAPI.
The idea is to add NAPI instance per CQ (which is mapped 1:1 to SDQ/RDQ),
which means that each DQ can be handled separately. we have DQ for EMADs
and DQs for each trap group (like LLDP, BGP, L3 drops, etc..). See more
details in commit messages.
An additional improvement which is done as part of this set is related to
doorbells' ring. The idea is to handle small chunks of Rx packets (which
is also recommended using NAPI) and ring doorbells once per chunk. This
reduces the access to hardware which is expensive (time wise) and might
take time because of memory barriers.
With this set we can see better performance.
To summerize:
EMADs latency:
+------------------------------------------------------------------------+
| | Before this set | Now |
|------------------|---------------------------|-------------------------|
| Increased factor | x28 | x1.5 |
+------------------------------------------------------------------------+
Note that we can see even measurements that show better latency when
traffic is handled by the driver.
Throughput:
+------------------------------------------------------------------------+
| | Before this set | Now |
|-------------|----------------------------|-----------------------------|
| Reduced | 35% | 6% |
| packet rate | | |
+------------------------------------------------------------------------+
Additional improvements are planned - use page pool for buffer allocations
and avoid cache miss of each SKB using napi_build_skb().
Patch set overview:
Patches #1-#2 improve access to hardware by reducing dorbells' rings
Patch #3-#4 are preaparations for NAPI usage
Patch #5 converts the driver to use NAPI
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Spectrum ASICs only support a single interrupt, that means that all the
events are handled by one IRQ (interrupt request) handler. Once an
interrupt is received, we schedule tasklet to handle events from EQ and
then schedule tasklets to handle completions from CQs. Tasklet runs in
softIRQ (software IRQ) context, and will be run on the same CPU which
scheduled it. That means that today we use only one CPU to handle all the
packets (both network packets and EMADs) from hardware.
This can be improved using NAPI. The idea is to use NAPI instance per
CQ, which is mapped 1:1 to DQ (RDQ or SDQ). NAPI poll method can be run
in kernel thread, so then the driver will be able to handle WQEs in several
CPUs. Convert the existing code to use NAPI APIs.
Add NAPI instance as part of 'struct mlxsw_pci_queue' and initialize it
as part of CQs initialization. Set the appropriate poll method and dummy
net device, according to queue number, similar to tasklet setup. For CQs
which are used for completions of RDQ, use Rx poll method and
'napi_dev_rx', which is set as 'threaded'. It means that Rx poll method
will run in kernel context, so several RDQs will be handled in parallel.
For CQs which are used for completions of SDQ, use Tx poll method and
'napi_dev_tx', this method will run in softIRQ context, as it is
recommended in NAPI documentation, as Tx packets' processing is short task.
Convert mlxsw_pci_cq_{rx,tx}_tasklet() to poll methods. Handle 'budget'
argument - ignore it in Tx poll method, as it is recommended to not limit
Tx processing. For Rx processing, handle up to 'budget' completions.
Return 'work_done' which is the amount of completions that were handled.
Handle the following cases:
1. After processing 'budget' completions, the driver still has work to do:
Return work-done = budget. In that case, the NAPI instance will be
polled again (without the need to be rescheduled). Do not re-arm the
queue, as NAPI will handle the reschedule, so we do not have to involve
hardware to send an additional interrupt for the completions that should
be processed.
2. Event processing has been completed:
Call napi_complete_done() to mark NAPI processing as completed, which
means that the poll method will not be rescheduled. Re-arm the queue,
as all completions were handled.
In case that poll method handled exactly 'budget' completions, return
work-done = budget -1, to distinguish from the case that driver still
has completions to handle. Otherwise, return the amount of completions
that were handled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The next patch will set the driver to use NAPI for event processing. Then
tasklet mechanism will be used only for EQ. Reorganize 'mlxsw_pci_queue'
to hold EQ and CQ attributes in a union. For now, add tasklet for both EQ
and CQ. This will be changed in the next patch, as 'tasklet_struct' will be
replaced with NAPI instance.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw will use NAPI for event processing in a next patch. As preparation,
add two dummy net devices and initialize them.
NAPI instance should be attached to net device. Usually each queue is used
by a single net device in network drivers, so the mapping between net
device to NAPI instance is intuitive. In our case, Rx queues are not per
port, they are per trap-group. Tx queues are mapped to net devices, but we
do not have a separate queue for each local port, several ports share the
same queue.
Use init_dummy_netdev() to initialize dummy net devices for NAPI.
To run NAPI poll method in a kernel thread, the net device which NAPI
instance is attached to should be marked as 'threaded'. It is
recommended to handle Tx packets in softIRQ context, as usually this is
a short task - just free the Tx packet which has been transmitted.
Rx packets handling is more complicated task, so drivers can use a
dedicated kernel thread to process them. It allows processing packets from
different Rx queues in parallel. We would like to handle only Rx packets in
kernel threads, which means that we will use two dummy net devices
(one for Rx and one for Tx). Set only one of them with 'threaded' as it
will be used for Rx processing. Do not fail in case that setting 'threaded'
fails, as it is better to use regular softIRQ NAPI rather than preventing
the driver from loading.
Note that the net devices are initialized with init_dummy_netdev(), so
they are not registered, which means that they will not be visible to user.
It will not be possible to change 'threaded' configuration from user
space, but it is reasonable in our case, as there is no another
configuration which makes sense, considering that user has no influence
on the usage of each queue.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, for each CQE in CQ, we ring CQ doorbell, then handle RDQ and
ring RDQ doorbell. Finally we ring CQ arm doorbell - once per CQ tasklet.
The idea of ringing CQ doorbell before RDQ doorbell, is to be sure that
when we post new WQE (after RDQ is handled), there is an available CQE.
This was done because of a hardware bug as part of
commit c9ebea04cb ("mlxsw: pci: Ring CQ's doorbell before RDQ's").
There is no real reason to ring RDQ and CQ doorbells for each completion,
it is better to handle several completions and reduce number of ringings,
as access to hardware is expensive (time wise) and might take time because
of memory barriers.
A previous patch changed CQ tasklet to handle up to 64 Rx packets. With
this limitation, we can ring CQ and RDQ doorbells once per CQ tasklet.
The counters of the doorbells are increased by the amount of packets
that we handled, then the device will know for which completion to send
an additional event.
To avoid reordering CQ and RDQ doorbells' ring, let the tasklet to ring
also RDQ doorbell, mlxsw_pci_cqe_rdq_handle() handles the counter but
does not ring the doorbell.
Note that with this change there is no need to copy the CQE, as we ring CQ
doorbell only after Rx packet processing (which uses the CQE) is done.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can get many completions in one interrupt. Currently, the CQ tasklet
handles up to half queue size completions, and then arms the hardware to
generate additional events, which means that in case that there were
additional completions that we did not handle, we will get immediately an
additional interrupt to handle the rest.
The decision to handle up to half of the queue size is arbitrary and was
determined in 2015, when mlxsw driver was added to the kernel. One
additional fact that should be taken into account is that while WQEs
from RDQ are handled, the CPU that handles the tasklet is dedicated for
this task, which means that we might hold the CPU for a long time.
Handle WQEs in smaller chucks, then arm CQ doorbell to notify the hardware
to send additional notifications. Set the chunk size to 64 as this number
is recommended using NAPI and the driver will use NAPI in a next patch.
Note that for now we use ARM doorbell to retrigger CQ tasklet, but with
NAPI it will be more efficient as software will reschedule the poll
method and we will not involve hardware for that.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of commit c4e86b4363 ("net: add two more
call_rcu_hurry()")
fib6_info_destroy_rcu() is calling nexthop_put() or fib6_nh_release()
We must not delay it too much or risk unregister_netdevice/ref_tracker
traces because references to netdev are not released in time.
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of commit c4e86b4363 ("net: add two more
call_rcu_hurry()")
Our reference to ifa->ifa_dev must be freed ASAP
to release the reference to the netdev the same way.
inet_rcu_free_ifa()
in_dev_put()
-> in_dev_finish_destroy()
-> netdev_put()
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This came while reviewing commit c4e86b4363 ("net: add two more
call_rcu_hurry()").
Paolo asked if adding one synchronize_rcu() would help.
While synchronize_rcu() does not help, making sure to call
rcu_barrier() before msleep(wait) is definitely helping
to make sure lazy call_rcu() are completed.
Instead of waiting ~100 seconds in my tests, the ref_tracker
splats occurs one time only, and netdev_wait_allrefs_any()
latency is reduced to the strict minimum.
Ideally we should audit our call_rcu() users to make sure
no refcount (or cascading call_rcu()) is held too long,
because rcu_barrier() is quite expensive.
Fixes: 0e4be9e57e ("net: use exponential backoff in netdev_wait_allrefs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/all/28bbf698-befb-42f6-b561-851c67f464aa@kernel.org/T/#m76d73ed6b03cd930778ac4d20a777f22a08d6824
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the base-time for taprio is in the past, start the schedule at the time
of the form "base_time + N*cycle_time" where N is the smallest possible
integer such that the above time is in the future.
Signed-off-by: Tanmay Patil <t-patil@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using YNL in tests appending the doc string to the type
name makes it harder to check that we got the correct error.
Put the doc under a separate key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240426003111.359285-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
