Commit Graph

1718 Commits

Author SHA1 Message Date
Johannes Berg
c3826807bb regulatory: fix world regulatory domain data
The rule definitions here aren't really valid, they would
be rejected if it came from userspace due to the bandwidth
specified being bigger than the rule's width.

This is fairly much inconsequential since the other rules
around them do enable the bandwidth, but express that better
using the NL80211_RRF_AUTO_BW flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14 11:10:13 +01:00
Dave Young
94c4fd641e wireless: change cfg80211 regulatory domain info as debug messages
cfg80211 module prints a lot of messages like below. Actually printing
once is acceptable but sometimes it will print again and again, it looks
very annoying. It is better to change these detail messages to debugging
only.

cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

The changes in this patch is to replace pr_info with pr_debug in function
print_rd_rules and print_regdomain_info

Signed-off-by: Dave Young <dyoung@redhat.com>
[change some pr_err() statements to at least keep the alpha2]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14 11:10:11 +01:00
David S. Miller
b3e0d3d7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17 22:08:28 -05:00
Ola Olsson
707554b4d1 nl80211: Fix potential memory leak in nl80211_connect
Free cached keys if the last early return path is taken.

Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-15 13:11:26 +01:00
Ola Olsson
e5dbe0701a nl80211: Fix potential memory leak in nl80211_set_wowlan
Compared to cfg80211_rdev_free_wowlan in core.h,
the error goto label lacks the freeing of nd_config.
Fix that.

Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-15 13:10:05 +01:00
Ola Olsson
09d118008f nl80211: fix a few memory leaks in reg.c
The first leak occurs when entering the default case
in the switch for the initiator in set_regdom.
The second leaks a platform_device struct if the
platform registration in regulatory_init succeeds but
the sub sequent regulatory hint fails due to no memory.

Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-15 13:08:02 +01:00
Michal Sojka
1aeb135f84 cfg80211: reg: Refactor calculation of bandwidth flags
The same piece of code appears at two places. Make a function from it.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Johannes Berg
bda95eb1d1 cfg80211: handle add_station auth/assoc flag quirks
When a new station is added to AP/GO interfaces the default behaviour
is for it to be added authenticated and associated, due to backwards
compatibility. To prevent that, the driver must be able to do that
(setting the NL80211_FEATURE_FULL_AP_CLIENT_STATE feature flag) and
userspace must set the flag mask to auth|assoc and clear the set.

Handle this quirk in the API entirely in nl80211, and always push the
full flags to the drivers. NL80211_FEATURE_FULL_AP_CLIENT_STATE is
still required for userspace to be allowed to set the mask including
those bits, but after checking that add both flags to the mask and
set in case userspace didn't set them otherwise.

This obsoletes the mac80211 code handling this difference, no other
driver is currently using these flags.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Ayala Beker
a9bc31e418 cfg80211: use NL80211_ATTR_STA_AID in nl82011_set_station
Fix nl80211_set_station() to use the value of NL80211_ATTR_STA_AID
attribute instead of NL80211_ATTR_PEER_AID attribute.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Vidyullatha Kanchanapally
91d3ab4673 cfg80211: Add support for aborting an ongoing scan
Implement new functionality for aborting an ongoing scan.

Add NL80211_CMD_ABORT_SCAN to the nl80211 interface. After
aborting the scan, driver shall provide the scan status by
calling cfg80211_scan_done().

Reviewed-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com>
Signed-off-by: Sunil Dutt <usdutt@qti.qualcomm.com>
[change command to take wdev instead of netdev so that it
 can be used on p2p-device scans]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Michal Sojka
c781944b71 cfg80211: Remove unused cfg80211_can_use_iftype_chan()
Last caller of this function was removed in 3.17 in commit
97dc94f1d9.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Michal Sojka
491728746b cfg80211: reg: Remove unused function parameter
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Ola Olsson
1b9df2d20e cfg80211: ocb: Fix null pointer deref if join_ocb is unimplemented
Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Johannes Berg
996bf99c71 lib80211: ratelimit key index mismatch
This indicates a driver key selection issue, but even then there's
no point in printing it all the time, so ratelimit it. Also remove
the priv pointer from it -- people debugging will only have a single
device anyway and it's useless as anything but a cookie.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Johannes Berg
0483eeac59 cfg80211: replace ieee80211_ie_split() with an inline
The function is a very simple wrapper around another one,
just adds a few default parameters, so replace it with a
static inline instead of using EXPORT_SYMBOL, reducing
the module size slightly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Johannes Berg
6e045905d1 cfg80211: add complete data to station add/change tracing
Complete the tracepoint with the missing data - it's not printed
by default (a lot of it is dynamic arrays) but will be recorded
and be available during post-processing.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Ilan Peer
a1056b1baa cfg80211: Add missing tracing to cfg80211
Add missing tracing for:

1. start_radar_detection()
2. set_mcast_rates()
3. set_coalesce()

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Ayala Beker
e420842724 cfg80211: allow AID/listen interval changes for unassociated station
Currently, cfg80211 rejects updates of AID and listen interval parameters
for existing entries. This information is known only at association stage
and as a result it's impossible to update entries that were added
unassociated.
Fix this by allowing updates of these properies for stations that the
driver (or mac80211) assigned unassociated state.

This then fixes mac80211's use of NL80211_FEATURE_FULL_AP_CLIENT_STATE.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 11:20:29 +01:00
Ola Olsson
4baf6bea37 nl80211: Fix potential memory leak from parse_acl_data
If parse_acl_data succeeds but the subsequent parsing of smps
attributes fails, there will be a memory leak due to early returns.
Fix that by moving the ACL parsing later.

Cc: stable@vger.kernel.org
Fixes: 18998c381b ("cfg80211: allow requesting SMPS mode on ap start")
Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:40:58 +01:00
Johannes Berg
a515de6607 cfg80211: reg: fix reg_ignore_cell_hint return type
The return type should be enum reg_request_treatment for both
branches of the #ifdef.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-16 09:15:45 +02:00
Johannes Berg
81e925747e cfg80211: reg: reduce chan_reg_rule_print_dbg() ifdef
The function is void and static, so just ifdef its contents
instead of duplicating the declaration.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-16 09:15:45 +02:00
Johannes Berg
9f50680292 cfg80211: reg: fix antenna gain in chan_reg_rule_print_dbg()
Printing "N/A mBi" is strange - print just "N/A" instead.

Also add a missing opening parenthesis.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-16 09:15:44 +02:00
Johannes Berg
d34265a3ee cfg80211: reg: centralize freeing ignored requests
Instead of having a lot of places that free ignored requests
and then return REG_REQ_OK, make reg_process_hint() process
REG_REQ_IGNORE by freeing the request, and let functions it
calls return that instead of freeing.

This also fixes a leak when a second (different) country IE
hint was ignored.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-16 09:15:44 +02:00
Johannes Berg
480908a7ec cfg80211: reg: clarify 'treatment' handling in reg_process_hint()
This function can only deal with treatment values OK and ALREADY_SET
so make the callees not return anything else and warn if they do.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-16 09:15:44 +02:00
Johannes Berg
fd453d3c53 cfg80211: reg: rename reg_regdb_query() to reg_query_builtin()
The new name better reflects the functionality.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-16 09:15:43 +02:00
Johannes Berg
b686303691 cfg80211: reg: make CRDA support optional
If there's a built-in regulatory database, there may be little point
in also calling out to CRDA and failing if the system is configured
that way. Allow removing CRDA support to save ~1K kernel size.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-16 09:15:39 +02:00
Johannes Berg
922ec58c70 cfg80211: reg: remove useless reg_timeout scheduling
When the functions reg_set_rd_driver() and reg_set_rd_country_ie()
return with an error, the calling function already restores data
by calling restore_regulatory_settings(), so there's no need to
also schedule a timeout (which would lead to other side effects
such as indicating CRDA failed, which clearly isn't true.) Remove
the scheduling.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-15 16:17:09 +02:00
Johannes Berg
c7d319e542 cfg80211: reg: search built-in database directly
Instead of searching the built-in database only in the worker,
search it directly and return an error if the entry cannot be
found (or memory cannot be allocated.) This means that builtin
database queries no longer rely on the timeout.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-15 16:17:09 +02:00
Johannes Berg
cecbb069cc cfg80211: reg: rename reg_call_crda to reg_query_database
The new name is more appropriate since in the case of a built-in
database it may not really rely on CRDA.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-15 16:17:08 +02:00
Johannes Berg
25b20dbdc4 cfg80211: reg: fix reg_call_crda() return value bug
The function reg_call_crda() can't actually validly return
REG_REQ_IGNORE as it does now when calling CRDA fails since
that return value isn't handled properly. Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-15 16:17:08 +02:00
Johannes Berg
7cf3741823 cfg80211: reg: remove useless non-NULL check
There's no way that the alpha2 pointer can be NULL, so
no point in checking that it isn't.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-15 16:17:07 +02:00
Johannes Berg
8047d2616d cfg80211: fix gHz to GHz
There's no "g" prefix, only "G" (1e9) that was clearly intended here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-15 16:17:07 +02:00
Avraham Stern
3b06d27795 cfg80211: Add multiple scan plans for scheduled scan
Add the option to configure multiple 'scan plans' for scheduled scan.
Each 'scan plan' defines the number of scan cycles and the interval
between scans. The scan plans are executed in the order they were
configured. The last scan plan will always run infinitely and thus
defines only the interval between scans.
The maximum number of scan plans supported by the device and the
maximum number of iterations in a single scan plan are advertised
to userspace so it can configure the scan plans appropriately.

When scheduled scan results are received there is no way to know which
scan plan is being currently executed, so there is no way to know when
the next scan iteration will start. This is not a problem, however.
The scan start timestamp is only used for flushing old scan results,
and there is no difference between flushing all results received until
the end of the previous iteration or the start of the current one,
since no results will be received in between.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:35:26 +02:00
Dmitry Shmidt
6e19bc4b70 nl80211: allow BSS data to include CLOCK_BOOTTIME timestamp
For location and connectivity services, userspace would often like
to know the time when the BSS was last seen. The current "last seen"
value is calculated in a way that makes it less useful, especially
if the system suspended in the meantime.

Add the ability for the driver to report a real CLOCK_BOOTTIME stamp
that can then be reported to userspace (if present).

Drivers wishing to use this must be converted to the new API to call
cfg80211_inform_bss_data() or cfg80211_inform_bss_frame_data(). They
need to ensure the reported value is accurate enough even when the
frame might have been buffered in the device (e.g. firmware.)

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
[modified to use struct, inlines]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:32:17 +02:00
David S. Miller
2579c98f0d For the current cycle, we have the following right now:
* many internal fixes, API improvements, cleanups, etc.
  * full AP client state tracking in cfg80211/mac80211 from Ayala
  * VHT support (in mac80211) for mesh
  * some A-MSDU in A-MPDU support from Emmanuel
  * show current TX power to userspace (from Rafał)
  * support for netlink dump in vendor commands (myself)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJWEp5XAAoJEDBSmw7B7bqr8DsQAICgQL7gSkHUlc6rbMJ9MzX+
 9W0SNpZHSmfE0ZsL3cCoeHbk5dGhX82GumIz4GeqtvIKUNHkC8qlnXJIKTEva+sp
 PjcF1wS0qQFdt6sg/Zxq+4Q8lZrZf1xP9W0x0ORYi9d9qej07JAZku8zYt4agpNV
 R4nCl/gKVF375aV8y+qi+WSZXx4j80dJkokoVk4hzotWjd0bGVL1T9YwDRzxg4FI
 S0DnkxlsD3MRHJXq+9+DbF5cuTjCG2LZNcDIBy455eWN27j9CWgEPVXoySQjDgQc
 ayf2siw7BccqnV84et0vi+0WYXdZCHm3zCen44s4vaCflhdGxdx48V+Lib6mluR3
 OEM1V1l9uV97UyORPljRKvDURq2IUdLQw00of26CTX8qEnmQIfxC7qaRg0rYEiGW
 SbTClbEiEkBLV+sCStnkv8GJHNpvtI/2VQXH1ydrHsrWC3Sl9bpPOWYlNBPwdzM9
 U4zgpxf6gLqlsukQKmMDmoKW7T04Fs0qgE99ThU2x6uTGsux8bfbxgzPCfUdeY8M
 HmCB5oBCZKJ5pzv6z6lUGc0cO42IL50aBrrlatrEekjevUXW3MMOZCwGrUXxpMw1
 gd+2PnLCCUeDyKNvkpXEgr4uS9Egc0sWH1RlpDPaAA5gRdRHiDn7MK7Z+s5OpNIC
 wnFCQKB+KrNNrQFuXz9k
 =BF9F
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
For the current cycle, we have the following right now:
 * many internal fixes, API improvements, cleanups, etc.
 * full AP client state tracking in cfg80211/mac80211 from Ayala
 * VHT support (in mac80211) for mesh
 * some A-MSDU in A-MPDU support from Emmanuel
 * show current TX power to userspace (from Rafał)
 * support for netlink dump in vendor commands (myself)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 04:29:18 -07:00
Ayala Beker
47edb11b52 cfg80211: allow changing station capabilities for unassociated stations
Currently, cfg80211 rejects capability updates for existing entries
and as a result it's impossible to update entries that were added
unassociated, but that is necessary to go through the full station
states from userspace, adding a station before authentication etc.

Fix this by allowing updates to capabilities for stations that the
driver (or mac80211) assigned unassociated state. Drivers setting
the full station state support flag must use the new station type
for proper operation.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:50 +02:00
Fu, Zhonghui
9f0e13546e net/wireless: enable wiphy device to suspend/resume asynchronously
Now, PM core supports asynchronous suspend/resume mode for devices
during system suspend/resume, and the power state transition of one
device may be completed in separate kernel thread. PM core ensures
all power state transition timing dependency between devices. This
patch enables wiphy device to suspend/resume asynchronously. This can
take advantage of multicore and improve system suspend/resume speed.

Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:46 +02:00
Rafał Miłecki
d55d0d598e nl80211: put current TX power in interface info
Many drivers implement reading current TX power (using either cfg80211
or ieee80211 op) but userspace can't get it using nl80211. Right now the
only way to access it is to call some wext ioctl.
Let's put TX power in interface info reply (callback is wdev specific)
just like we do with current channel.
To be consistent (e.g. NL80211_CMD_SET_WIPHY) let's use mBm as na unit.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:27 +02:00
Johannes Berg
7bdbe400d1 nl80211: support vendor dumpit commands
In order to transfer many items in vendor commands, support the
dumpit netlink method for them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:22 +02:00
Johannes Berg
8de1c63ba1 wireless: make __freq_reg_info static
As pointed out by sparse, this symbol should be static, make it so.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:20 +02:00
Maciej S. Szmigiero
549cc1c560 cfg80211: regulatory: restore proper user alpha2
restore_regulatory_settings() should restore alpha2
as computed in restore_alpha2(), not raw user_alpha2 to
behave as described in the comment just above that code.

This fixes endless loop of calling CRDA for "00" and "97"
countries after resume from suspend on my laptop.

Looks like others had the same problem, too:
http://ath9k-devel.ath9k.narkive.com/knY5W6St/ath9k-and-crda-messages-in-logs
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/899335
https://forum.porteus.org/viewtopic.php?t=4975&p=36436
https://forums.opensuse.org/showthread.php/483356-Authentication-Regulatory-Domain-issues-ath5k-12-2

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04 14:29:25 +02:00
Bertold Van den Bergh
876dc9308e nl80211: Allow setting multicast rate on OCB interfaces
Allow setting multicast rate on OCB interfaces.
Current behaviour results in EOPNOTSUPP when attempting this.

Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:48 +02:00
Michal Kazior
9189ee31df cfg80211: propagate set_wiphy failure to userspace
If driver failed to setup wiphy params (e.g. rts
threshold, fragmentation treshold) userspace
wasn't properly notified about this. This could
lead to user confusion who would think the command
succeeded even if that wasn't the case.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:47 +02:00
Matthias May
4edd56981c cfg80211: regulatory: handle 5 and 10 MHz channels properly
The original assumption of 20MHz wide channels hasn't been true since
the addition of support for 5 and 10 MHz channels.
Change the code to no longer disable all channels that don't fit into
the 20MHz grid, but instead set the appropriate flags to disable
operation on specific bandwidths.

Signed-off-by: Matthias May <matthias.may@neratec.com>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:48:46 +02:00
Johannes Berg
72bbe3d1c2 Merge branch 'mac80211' into mac80211-next
This is necessary to merge the new TDLS and mesh patches,
as they depend on some fixes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:39:41 +02:00
John Linville
841b351cf9 wireless: remove superfluous if statement in regulatory code
Commit eeca9fce1d ('cfg80211: Schedule timeout for all CRDA calls')
left behind a superfluous check after it removed some earlier code.

In reg_process_hint, the test of "treatment == REG_REQ_IGNORE ||
treatment == REG_REQ_ALREADY_SET" is superfluous because the code in the
if-then branch is identical to the code after the if statement.

Coverity CID #1295939

I also removed the unnecessary assignment of treatment in this case,
and added a comment reminding any future patch authors to ensure that
treatment is properly assigned before it is used after the switch.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:27 +02:00
Johannes Berg
33d8783c58 cfg80211: allow mgmt_frame_register callback to sleep
This callback is currently not allowed to sleep, which makes it more
difficult to implement proper driver methods in mac80211 than it has
to be. Instead of doing asynchronous work here in mac80211, make it
possible for the callback to sleep by doing some asynchronous work
in cfg80211. This also enables improvements to other drivers, like
ath6kl, that would like to sleep in this callback.

While at it, also fix the code to call the driver on the implicit
unregistration when an interface is removed, and do that also when
a P2P-Device wdev is destroyed (otherwise we leak the structs.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:26 +02:00
Arik Nemtsov
923b352f19 cfg80211: use RTNL locked reg_can_beacon for IR-relaxation
The RTNL is required to check for IR-relaxation conditions that allow
more channels to beacon. Export an RTNL locked version of reg_can_beacon
and use it where possible in AP/STA interface type flows, where
IR-relaxation may be applicable.

Fixes: 06f207fc54 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:02:02 +02:00
Thomas Petazzoni
042ab5fc7a wireless: regulatory: reduce log level of CRDA related messages
With a basic Linux userspace, the messages "Calling CRDA to update
world regulatory domain" appears 10 times after boot every second or
so, followed by a final "Exceeded CRDA call max attempts. Not calling
CRDA". For those of us not having the corresponding userspace parts,
having those messages repeatedly displayed at boot time is a bit
annoying, so this commit reduces their log level to pr_debug().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 14:37:23 +02:00
David S. Miller
25c43bf13b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-06-13 23:56:52 -07:00