Do not shadow the return code from adf_dev_down() in the error path of
the DEV_DOWN command.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 1bdc85550a ("crypto: qat - fix concurrency issue when device
state changes") introduced the function adf_dev_down() which wraps the
functions adf_dev_stop() and adf_dev_shutdown().
In a subsequent change, the sequence adf_dev_stop() followed by
adf_dev_shutdown() was then replaced across the driver with just a call
to the function adf_dev_down().
The functions adf_dev_stop() and adf_dev_shutdown() are called in error
paths to stop the accelerator and free up resources and can be called
even if the counterparts adf_dev_init() and adf_dev_start() did not
complete successfully.
However, the implementation of adf_dev_down() prevents the stop/shutdown
sequence if the device is found already down.
For example, if adf_dev_init() fails, the device status is not set as
started and therefore a call to adf_dev_down() won't be calling
adf_dev_shutdown() to undo what adf_dev_init() did.
Do not check if a device is started in adf_dev_down() but do the
equivalent check in adf_sysfs.c when handling a DEV_DOWN command from
the user.
Fixes: 2b60f79c7b ("crypto: qat - replace state machine calls")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the support of zlib-deflate and gzip.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the deflate algorithm support for hisilicon zip hardware.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds two different implementations of ECB. First of
all an lskcipher wrapper around existing ciphers is introduced as
a temporary transition aid.
Secondly a permanent lskcipher template is also added. It's simply
a wrapper around the underlying lskcipher algorithm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As an aid to the transition from cipher algorithm implementations
to lskcipher, add a temporary wrapper when creating simple lskcipher
templates by using ecb(X) instead of X if an lskcipher implementation
of X cannot be found.
This can be reverted once all cipher implementations have switched
over to lskcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new API type lskcipher designed for taking straight kernel
pointers instead of SG lists. Its relationship to skcipher will
be analogous to that between shash and ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the macro CRYPTO_ALG_TYPE_AHASH_MASK out of linux/crypto.h
and into crypto/ahash.c so that it's not visible to users of the
Crypto API.
Also remove the unused CRYPTO_ALG_TYPE_HASH_MASK macro.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop using the obsolete crypto_has_alg helper that is type-agnostic.
Instead use the type-specific helpers such as the newly added
crypto_has_aead.
This means that changes in the underlying type/mask values won't
affect IPsec.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the helper crypto_has_aead. This is meant to replace the
existing use of crypto_has_alg to locate AEAD algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tfm is assigned first, so it does not need to initialize
the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set a more reasonable timeout for calculating the initial seed.
The reference manuals says that "The initial seed takes approximately
2,000,000 clock cycles." The rngc peripheral clock runs at >= 33.25MHz,
so seeding takes at most 60ms.
A timeout of 200ms is more appropriate than the current value of 3
seconds.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set a more reasonable timeout for the rngc selftest.
According to the reference manual, "The self test takes approximately
29,000 cycles to complete." The lowest possible frequency of the rngc
peripheral clock is 33.25MHz, the selftest would then take about 872us.
2.5ms should be enough for the selftest timeout.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the membase and pci_dev pointer were moved to a new struct in priv,
the actual membase users were left untouched, and they started reading
out arbitrary memory behind the struct instead of registers. This
unfortunately turned the RNG into a constant number generator, depending
on the content of what was at that offset.
To fix this, update geode_rng_data_{read,present}() to also get the
membase via amd_geode_priv, and properly read from the right addresses
again.
Fixes: 9f6ec8dc57 ("hwrng: geode - Fix PCI device refcount leak")
Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217882
Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use unsigned long instead of u64 to silence compile warnings on
32-bit platforms. Also remove the __force bit which seems no
longer needed with a current sparse.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On some SOCs DBC is supported through the PSP mailbox instead of
the platform mailbox. This capability is advertised in the PSP
capabilities register. Allow using this communication path if
supported.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offsets are checked by the capabilities register in multiple places.
To make the code more readable add a macro.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DBC is currently accessed only from the platform access mailbox and
a lot of that implementation's communication path is intertwined
with DBC. Add an abstraction layer for pointers into the mailbox.
No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PSP mailbox supports a number of extended sub-commands. These
subcommands are placed in the header of the buffer sent to the mailbox.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the PSP mailbox registers supporting more than just TEE, access to
them must be maintained and serialized by the PSP device support. Remove
TEE support direct access and create an interface in the PSP support
where the register access can be controlled/serialized.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Tested-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The last RCU stall fix caused a massive throughput regression of the
hwrng on Raspberry Pi 0 - 3. hwrng_msleep doesn't sleep precisely enough
and usleep_range doesn't allow scheduling. So try to restore the
best possible throughput by introducing hwrng_yield which interruptable
sleeps for one jiffy.
Some performance measurements on Raspberry Pi 3B+ (arm64/defconfig):
sudo dd if=/dev/hwrng of=/dev/null count=1 bs=10000
cpu_relax ~138025 Bytes / sec
hwrng_msleep(1000) ~13 Bytes / sec
hwrng_yield ~2510 Bytes / sec
Fixes: 96cb9d0554 ("hwrng: bcm2835 - use hwrng_msleep() instead of cpu_relax()")
Link: https://lore.kernel.org/linux-arm-kernel/bc97ece5-44a3-4c4e-77da-2db3eb66b128@gmx.net/
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This error handling looks really strange.
Check if the string has been truncated instead.
Fixes: 02ab994635 ("crypto: hisilicon - Fixed some tiny bugs of HPRE")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We found a hungtask bug in test_aead_vec_cfg as follows:
INFO: task cryptomgr_test:391009 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call trace:
__switch_to+0x98/0xe0
__schedule+0x6c4/0xf40
schedule+0xd8/0x1b4
schedule_timeout+0x474/0x560
wait_for_common+0x368/0x4e0
wait_for_completion+0x20/0x30
wait_for_completion+0x20/0x30
test_aead_vec_cfg+0xab4/0xd50
test_aead+0x144/0x1f0
alg_test_aead+0xd8/0x1e0
alg_test+0x634/0x890
cryptomgr_test+0x40/0x70
kthread+0x1e0/0x220
ret_from_fork+0x10/0x18
Kernel panic - not syncing: hung_task: blocked tasks
For padata_do_parallel, when the return err is 0 or -EBUSY, it will call
wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal
case, aead_request_complete() will be called in pcrypt_aead_serial and the
return err is 0 for padata_do_parallel. But, when pinst->flags is
PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it
won't call aead_request_complete(). Therefore, test_aead_vec_cfg will
hung at wait_for_completion(&wait->completion), which will cause
hungtask.
The problem comes as following:
(padata_do_parallel) |
rcu_read_lock_bh(); |
err = -EINVAL; | (padata_replace)
| pinst->flags |= PADATA_RESET;
err = -EBUSY |
if (pinst->flags & PADATA_RESET) |
rcu_read_unlock_bh() |
return err
In order to resolve the problem, we replace the return err -EBUSY with
-EAGAIN, which means parallel_data is changing, and the caller should call
it again.
v3:
remove retry and just change the return err.
v2:
introduce padata_try_do_parallel() in pcrypt_aead_encrypt and
pcrypt_aead_decrypt to solve the hungtask.
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve AES/XTS performance of 6-way unrolling for PowerPC up
to 17% with tcrypt. This is done by using one instruction,
vpermxor, to replace xor and vsldoi.
The same changes were applied to OpenSSL code and a pull request was
submitted.
This patch has been tested with the kernel crypto module tcrypt.ko and
has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert list_for_each() to list_for_each_entry() so that the list_itr
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some of the tests for unfused parts referenced a named member parameter,
but when the test suite was switched to call a python ctypes library they
weren't updated. Adjust them to refer to the first argument of the
process_param() call and set the data type of the signature appropriately.
Fixes: 15f8aa7bb3 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When parameters are sent the PSP returns back it's own signature
for the application to verify the authenticity of the result.
Display this signature to the caller instead of the one the caller
sent.
Fixes: f40d42f116 ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed322 ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sample application was taking values from ioctl() and treating
those as the error codes to present to a user.
This is incorrect when ret is non-zero, the error is stored to `errno`.
Use this value instead.
Fixes: f40d42f116 ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed322 ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A local environment change was importing ioctl_opt which is required
for ioctl tests to pass. Add the missing import for it.
Fixes: 15f8aa7bb3 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dbc_dev_init() gets a free page from `GFP_KERNEL`, but if that page has
any data in it the first nonce request will fail.
This prevents dynamic boost control from probing. To fix this, explicitly
request a zeroed page with `__GFP_ZERO` to ensure first nonce fetch works.
Fixes: c04cf9e14f ("crypto: ccp - Add support for fetching a nonce for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs description for fw_counters reports an incorrect path
indicating a qat folder that does not exist. Fix it.
Fixes: 865b50fe6e ("crypto: qat - add fw_counters debugfs file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add inclusion of linux/errno.h as otherwise the reference to EINVAL
may be invalid.
Fixes: f3cf4134c5 ("bpf: Add bpf_lookup_*_key() and bpf_key_put() kfuncs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308261414.HKw1Mrip-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a MODULE_DESCRIPTION to fix the W=1 warning
WARNING: modpost: missing MODULE_DESCRIPTION() in
drivers/char/hw_random/st-rng.o
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
