In case of errors during core start operation from sysfs, the driver
directly returns with the -EPERM error code. Fix this to ensure that
mailbox channels are freed on error before returning by jumping to the
'put_mbox' error handling label. Similarly, jump to the 'out' error
handling label to return with required -EPERM error code during the
core stop operation from sysfs.
Fixes: 3c8a9066d5 ("remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240506141849.1735679-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Set the error code to ERR_PTR(-ENOMEM). Otherwise if there is an
allocation failure it leads to a NULL dereference in the caller.
Fixes: c08a824945 ("remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/b2114e3c-fa64-4edb-a1ff-d2009e544c3f@moroto.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second
core when the first core is in ON state. Power-state for core0 should be
equal to or higher than core1.
Therefore, prevent core1 from powering up before core0 during the start
process from sysfs. Similarly, prevent core0 from shutting down before
core1 has been shut down from sysfs.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second core
when the first core is in ON state. Power-state for core0 should be equal
to or higher than core1, else the kernel is seen hanging during rproc
loading.
Make the powering up of cores sequential, by waiting for the current core
to power-up before proceeding to the next core, with a timeout of 2sec.
Add a wait queue event in k3_r5_cluster_rproc_init call, that will wait
for the current core to be released from reset before proceeding with the
next core.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The SCP on different chips will require different DRAM sizes and IPI
shared buffer sizes based on varying requirements.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-4-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
MT8188 SCP has two RISC-V cores which is similar to MT8195 but without
L1TCM. We've added MT8188-specific functions to configure L1TCM in
multicore setups.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-3-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
AMD-Xilinx Versal platform is successor of ZynqMP platform.
Real-time Processing Unit R5 cluster IP on Versal is same as
of ZynqMP Platform. Power-domains ids for Versal platform is
different than ZynqMP.
AMD-Xilinx Versal-NET platform is successor of Versal platform.
Versal-NET Real-Time Processing Unit has two clusters and each
cluster contains dual core ARM Cortex-R52 processors. Each R52
core is assigned 128KB of TCM memory.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240418220125.744322-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
ZynqMP TCM information was fixed in driver. Now ZynqMP TCM information
is available in device-tree. Parse TCM information in driver
as per new bindings.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240412183708.4036007-5-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In lockstep mode, r5 core0 uses TCM of R5 core1. Following is lockstep
mode memory region as per hardware reference manual.
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 |
However, driver shouldn't model it as above because R5 core0 TCM and core1
TCM has different power-domains mapped to it.
Hence, TCM address space in lockstep mode should be modeled as 64KB
regions only where each region has its own power-domain as following:
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM0 (64 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM0 (64 KB) | 0x0002_0000 | 0xFFE2_0000 |
| R5_0 ATCM1 (64 KB) | 0x0001_0000 | 0xFFE1_0000 |
| R5_0 BTCM1 (64 KB) | 0x0003_0000 | 0xFFE3_0000 |
This makes driver maintanance easy and makes design robust for future
platorms as well.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240412183708.4036007-2-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Supporting remoteproc coredump requires the platform-specific driver to
register coredump segments to be dumped. Do this by calling
rproc_coredump_add_segment for every carveout.
Also call rproc_coredump_set_elf_info when then rproc is created. If the
ELFCLASS parameter is not provided then coredump fails with an error.
Other drivers seem to pass EM_NONE for the machine argument but for me
this shows a warning in gdb. Pass EM_ARM because this is an ARM R5.
Signed-off-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/r/d4556268-8274-4089-949f-3b97d67793c7@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The IPI buffer location is read from the firmware that we load to the
System Companion Processor, and it's not granted that both the SRAM
(L2TCM) size that is defined in the devicetree node is large enough
for that, and while this is especially true for multi-core SCP, it's
still useful to check on single-core variants as well.
Failing to perform this check may make this driver perform R/W
operations out of the L2TCM boundary, resulting (at best) in a
kernel panic.
To fix that, check that the IPI buffer fits, otherwise return a
failure and refuse to boot the relevant SCP core (or the SCP at
all, if this is single core).
Fixes: 3efa0ea743 ("remoteproc/mediatek: read IPI buffer offset from FW")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240321084614.45253-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the rproc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-remoteproc2-v1-1-1b139e9828c9@marliere.net
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Qualcomm SM8650 audio, compute and modem remoteproc are added. Qualcomm
X1 Elite audio and compute remoteprocs are added, after support for
shutting down the bootloader-loaded firmware loaded into the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres helpers
for remoteproc and memory allocations.
It makes it possible to acquire in-kernel handle to individual
remoteproc instances in a cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups.
-----BEGIN PGP SIGNATURE-----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=na/C
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Qualcomm SM8650 audio, compute and modem remoteproc are added.
Qualcomm X1 Elite audio and compute remoteprocs are added, after
support for shutting down the bootloader-loaded firmware loaded into
the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres
helpers for remoteproc and memory allocations - this makes it possible
to acquire in-kernel handle to individual remoteproc instances in a
cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups"
* tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP
remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP
remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper
dt-bindings: remoteproc: do not override firmware-name $ref
dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label
remoteproc: qcom: pas: correct data indentation
remoteproc: Make rproc_get_by_phandle() work for clusters
remoteproc: qcom: pas: Add SM8650 remoteproc support
remoteproc: qcom: pas: make region assign more generic
dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
remoteproc: k3-dsp: Use devm_rproc_add() helper
remoteproc: k3-dsp: Use devm_ioremap_wc() helper
remoteproc: k3-dsp: Add devm action to release tsp
remoteproc: k3-dsp: Use devm_kzalloc() helper
remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper
...
The UEFI loads a lite variant of the ADSP firmware to support charging
use cases. The kernel needs to unload and reload it with the firmware
that has full feature support for audio. This patch arbitarily shutsdown
the lite firmware before loading the full firmware.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240212-x1e80100-remoteproc-v2-3-604614367f38@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for PIL loading on ADSP and CDSP on X1E80100 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240212-x1e80100-remoteproc-v2-2-604614367f38@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-7-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-6-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-5-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-4-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-3-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct indentation of several struct adsp_data instances to always use
a single TAB character instead of two.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-4-6858fa1ac1c8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's avoid some of the boilerplate code to manage the various PM domain
cases, by converting into using dev_pm_domain_attach|detach_list().
As a part of the conversion, we are moving over to use device_links, which
simplifies the runtime PM support too. Moreover, while attaching let's
trust that an already attached single PM domain is the correct one.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: <linux-remoteproc@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240130123951.236243-5-ulf.hansson@linaro.org
Multi-cluster remoteproc designs typically have the following DT
declaration:
remoteproc-cluster {
compatible = "soc,remoteproc-cluster";
core0: core0 {
compatible = "soc,remoteproc-core"
memory-region;
sram;
};
core1: core1 {
compatible = "soc,remoteproc-core"
memory-region;
sram;
}
};
A driver exists for the cluster rather than the individual cores
themselves so that operation mode and HW specific configurations
applicable to the cluster can be made.
Because the driver exists at the cluster level and not the individual
core level, function rproc_get_by_phandle() fails to return the
remoteproc associated with the phandled it is called for.
This patch enhances rproc_get_by_phandle() by looking for the cluster's
driver when the driver for the immediate remoteproc's parent is not
found.
Reported-by: Ben Levinsky <ben.levinsky@xilinx.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Co-developed-by: Tarak Reddy <tarak.reddy@amd.com>
Signed-off-by: Tarak Reddy <tarak.reddy@amd.com>
Co-developed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240130154849.1018666-1-tanmay.shah@amd.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The current memory region assign only supports a single
memory region.
But new platforms introduces more regions to make the
memory requirements more flexible for various use cases.
Those new platforms also shares the memory region between the
DSP and HLOS.
To handle this, make the region assign more generic in order
to support more than a single memory region and also permit
setting the regions permissions as shared.
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-2-61283f50162f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use device lifecycle managed devm_rproc_add() helper function. This helps
prevent mistakes like deleting out of order in cleanup functions and
forgetting to delete on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-6-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed ioremap helper function. This helps prevent
mistakes like unmapping out of order in cleanup functions and forgetting
to unmap on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-5-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to release tps ti_sci_proc handle.
This helps prevent mistakes like releasing out of order in cleanup
functions and forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-4-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use device lifecycle managed devm_kzalloc() helper function. This helps
prevent mistakes like freeing out of order in cleanup functions and
forgetting to free on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-3-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed TI-SCI get() function. This helps prevent
mistakes like not put()'ing in the wrong order in cleanup functions and
forgetting to put() on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-9-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-8-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to free memory. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184913.725435-3-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to release reserved memory. This
helps prevent mistakes like releasing out of order in cleanup functions
and forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184913.725435-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184913.725435-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The sparse tool complains about the remove of the _iomem attribute.
stm32_rproc.c:660:17: warning: cast removes address space '__iomem' of expression
Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to addresses pointer,
which are then managed by the remoteproc core as a pointer to a
resource_table structure.
Fixes: 8a471396d2 ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The sparse tool complains about the attribute conversion between
a _iomem void * and a void *:
stm32_rproc.c:122:12: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected void *va @@ got void [noderef] __iomem * @@
stm32_rproc.c:122:12: sparse: expected void *va
stm32_rproc.c:122:12: sparse: got void [noderef] __iomem *
Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to virtual addresses pointer,used,
by the remoteproc core.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150052.HCiNKlqB-lkp@intel.com/
Fixes: 13140de09c ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Recovery remote processor failed when wdg irq received:
[ 0.842574] remoteproc remoteproc0: crash detected in cix-dsp-rproc: type watchdog
[ 0.842750] remoteproc remoteproc0: handling crash #1 in cix-dsp-rproc
[ 0.842824] remoteproc remoteproc0: recovering cix-dsp-rproc
[ 0.843342] remoteproc remoteproc0: stopped remote processor cix-dsp-rproc
[ 0.847901] rproc-virtio rproc-virtio.0.auto: Failed to associate buffer
[ 0.847979] remoteproc remoteproc0: failed to probe subdevices for cix-dsp-rproc: -16
The reason is that dma coherent mem would not be released when
recovering the remote processor, due to rproc_virtio_remove()
would not be called, where the mem released. It will fail when
it try to allocate and associate buffer again.
Releasing reserved memory from rproc_virtio_dev_release(), instead of
rproc_virtio_remove().
Fixes: 1d7b61c06d ("remoteproc: virtio: Create platform device for the remoteproc_virtio")
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231217053659.3245745-1-joakim.zhang@cixtech.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add support for the ADSP, CDSP and WPSS remoteprocs found on the SC7280
SoC using the q6v5-pas driver.
This driver can be used on regular LA ("Linux Android") based releases,
however the SC7280 ChromeOS devices need different driver support due to
firmware differences.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-6-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is no change in behaviour as .remove() already returned zero
unconditionally.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123211657.518181-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The error message
failed to send mailbox message (-EINVAL)
is (for a human) more useful than
failed to send mailbox message, status = -22
Adapt all error messages to use the symbolic names instead of the
numeric constants. The error paths in .probe() make use of
dev_err_probe() which automatically handles EPROBE_DEFER.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123211657.518181-7-u.kleine-koenig@pengutronix.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When the remove callback returns non-zero, the driver core emits an
error message about the error value being ignored. As the driver already
emits an error message already, return zero. This has no effect apart
from suppressing the core's message. The platform device gets unbound
irrespective of the return value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123211657.518181-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add the .find_loaded_rsc_table operation for i.MX DSP.
We need it for inter-process communication between DSP
and main core.
This callback is used to find the resource table (defined
in remote processor linker script) where the address of the
vrings along with the other allocated resources (carveouts etc)
are stored.
If this is not found, the vrings are not allocated and
the IPC between cores will not work.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231013152731.23471-2-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
