Introduce new st,stm32mp25-rtc compatible. It is based on st,stm32mp1-rtc.
Difference is that stm32mp25 soc implements a triple protection on RTC
registers:
- Secure bit based protection
- Privileged context based protection
- Compartment ID filtering based protection
This driver will now check theses configurations before probing to avoid
exceptions and fake reads on register.
At this time, driver needs only to check two resources: INIT and ALARM_A.
Other resources are not used.
Resource isolation framework (RIF) is a comprehensive set of hardware
blocks designed to enforce and manage isolation of STM32 hardware
resources, like memory and peripherals.
Link: https://www.st.com/resource/en/reference_manual/rm0457-stm32mp25xx-advanced-armbased-3264bit-mpus-stmicroelectronics.pdf#page=4081
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240708153434.416287-3-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove a comma after the sentinel entry in
rtc-hym8563.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240515194336.58342-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
`rtc_add_offset()` is called by `__rtc_read_time()`
and `__rtc_read_alarm()` to add the RTC's offset to
the raw read-outs from the device drivers. However,
in the latter case, a fix-up algorithm is run if
the RTC device does not report a full `struct rtc_time`
alarm value. In that case, the offset was forgot to be
added.
Fixes: fd6792bb02 ("rtc: fix alarm read and set offset")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240619140451.2800578-1-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
`tm_year` may go up to 299 if the device supports the
century bit. Therefore, subtracting may not give us
a valid 2-digit number, but modulo does.
Co-developed-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240611072411.671600-2-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch enables the detection of the oscillator failure on mcp794xx chips.
Co-developed-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240611072411.671600-1-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As per the latest HW manual[1], there is an internal delay(~250 microsec)
from setting ALME = 0 to disabling the alarm function, so the user must
add a short delay of greater than 250µs between setting ALME = 0 and
clearing ALM.
Currently setting of ALME = 0 is done after clearing the ALM, so just
reverse the operation and add a delay of 275 microsec.
[1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240618152635.48956-3-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As per the latest HW manual[1], the INT# output is pulled low after the
alarm is triggered. After the INT# output is pulled low, it is low for at
least 250ms, even if the correct action is taken to clear it. It is
impossible to clear ALM if it is still active. The host must wait for the
RTC to progress past the alarm time plus the 250ms delay before clearing
ALM.
[1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240618152635.48956-2-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/lib_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-goldfish.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-omap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-rc5t583.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-tps65910.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-twl.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE(). This includes rtc-mpc5121.c,
which does not produce a warning with the x86 allmodconfig since it is
not built for x86, but it may cause this warning with Freescale PPC
configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240608-md-drivers-rtc-v1-1-5f44222adfae@quicinc.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read callbacks registered with nvmem core expect 0 to be returned on
success and a negative value to be returned on failure.
abx80x_nvmem_xfer() on read calls i2c_smbus_read_i2c_block_data() which
returns the number of bytes read on success as per its api description,
this return value is handled as an error and returned to nvmem even on
success.
Fix to handle all possible values that would be returned by
i2c_smbus_read_i2c_block_data().
Fixes: e90ff8ede7 ("rtc: abx80x: Add nvmem support")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20240613120750.1455209-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
cmos_nvram_read()/cmos_nvram_write() currently return the number of
bytes read or written, fix to return 0 on success and -EIO incase number
of bytes requested was not read or written.
Fixes: 8b5b7958fd ("rtc: cmos: use generic nvmem")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240612083635.1253039-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
isl1208_nvmem_read()/isl1208_nvmem_write() currently return the number of
bytes read/written on success, fix to return 0 on success and negative on
failure.
Fixes: c3544f6f51 ("rtc: isl1208: Add new style nvmem support to driver")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Link: https://lore.kernel.org/r/20240612080831.1227131-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add power management support to the driver. This allows a SoC to wake
from suspend using the nINT provided by the RTC.
It takes care of the case when the interrupt has not been caught because
the kernel has not yet woke up.
(This is the case when only edges interrupt are caught)
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-4-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch will prepare for the next one (power management support) by
introducing struct tps6594_rtc.
No functionnal change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-3-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
struct rtc_device is allocated twice in probe(), once with
devm_kzalloc(), and then with devm_rtc_allocate_device().
The allocation with devm_kzalloc() is lost and superfluous.
Fixes: 9f67c1e639 ("rtc: tps6594: Add driver for TPS6594 RTC")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-2-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In some platforms, the RTC is able to wake up the system but is not
directly connected to an IRQ. Add wakeup-source property support to be able
to express this in the Device Tree.
Link: https://lore.kernel.org/r/20240426225821.448963-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Allow userspace to get battery status information and be able to warn when
battery is low and has to be replaced.
Tested-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/20240417191937.33790-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The proper way for userspace to react on a read time error is to have a
look at the voltage low information. There is no point in cluttering dmesg
as it is often not even visible to the end user.
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/20240417191937.33790-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
'regmap_spi_config' and 'regmap_i2c_config' are not modified in this diver
and are only used as a const struct regmap_config.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
8896 1554 32 10482 28f2 drivers/rtc/rtc-rx6110.o
After:
text data bss dec hex filename
9536 914 32 10482 28f2 drivers/rtc/rtc-rx6110.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/833a7f612c0de9dcb1179a0b75b189c237a335ac.1714862560.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154910.126991-1-krzk@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On slow systems, the rtc unit test may result in soft lockups and/or
generate messages such as
# rtc_time64_to_tm_test_date_range: Test should be marked slow (runtime: 34.253230015s)
# rtc_time64_to_tm_test_date_range: pass:1 fail:0 skip:0 total:1
The test covers a date range of 160,000 years, resulting in the long
runtime.
Unit tests running for more than 1 second are supposed to be marked as
slow. Just marking the test as slow would prevent it from running when
slow tests are disabled, which would not be desirable. At the same time,
the current test range of 160,000 years seems to be of limited value.
Split the test into two parts, one covering a range of 1,000 years and
the other covering the current range of 160,000 years. Mark the 160,000
year test as slow to be able to separate it from the faster test.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240313174221.1999654-1-linux@roeck-us.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Subsytem:
- rtc_class is now const
Drivers:
- ds1511: driver cleanup, set date and time range and alarm offset limit
- max31335: fix interrupt handler
- pcf8523: improve suspend support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmX8uCcACgkQY6TcMGxw
OjI1hA//fK1Cs2eDL2E7e8bQCJtDJ+gdzVT210LwT9TCOgUV+arqLjF/i/pq8m5j
CK/ukk5OLZL3v5dS7rsOZAiTg1N9Q+3SEoaTP029kRfA2SxOE2isR9W5nNAvyJC0
L4Y4YEcEMsJpluK94G1/4ult1We9vCGSlqlNknChp3BL5ELxg7T/Ea5wda2OLSRx
+ZgQpB6O+LIIQucm8mgCAlucMJrAj4+qEF7HO0AeElDh+md4OvjrF8Y30vTfs82L
hGazWQgu8J4Jmy4u6q00s5IhfsvwNZVYgaASv8ivB8/9qgQLktZ6HFHRSwloRXg2
o9OqcM/OR7Lw4taH/6pnVQ37UUAQ/Vy9QJy2GHza1uDzlBBjtqVz8zFqheu/rmnJ
3AX7hlowBx9fPpxmStP2Ac9WIvtepV25eOlDDSlDiS8/4T/DRJHwpRQghSTDnFJ4
fRU1HFbaj3ZKRgBzu5zJU4XvQO4X/DKxSHVMy+rVtsndWzDa8q11QZrQJAP4ZpLM
/+zfar2RFnsnop1Dg9cz/hq0gWbQUMJ16qN3cFYl3jVVzC3JSld7B0+DhZdII1Lg
YsCXuUQusnOTFm9GtyC6doHgmC3Dy2wentz6Vn6ynyBOR4NKjJPkI7PICdgzkIDi
AJI9qSxQcT6gOSw2PAlzOcYb7AD3cOJCeg3ukt7aDl8S38RKR3w=
=Is7n
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsytem:
- rtc_class is now const
Drivers:
- ds1511: cleanup, set date and time range and alarm offset limit
- max31335: fix interrupt handler
- pcf8523: improve suspend support"
* tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches
dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs
rtc: class: make rtc_class constant
dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints
MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER
rtc: nct3018y: fix possible NULL dereference
rtc: max31335: fix interrupt status reg
rtc: mt6397: select IRQ_DOMAIN instead of depending on it
dt-bindings: rtc: abx80x: convert to yaml
rtc: m41t80: Use the unified property API get the wakeup-source property
dt-bindings: at91rm9260-rtt: add sam9x7 compatible
dt-bindings: rtc: convert MT7622 RTC to the json-schema
dt-bindings: rtc: convert MT2717 RTC to the json-schema
rtc: pcf8523: add suspend handlers for alarm IRQ
rtc: ds1511: set alarm offset limit
rtc: ds1511: set range
rtc: ds1511: drop inline/noinline hints
rtc: ds1511: rename pdata
rtc: ds1511: implement ds1511_rtc_read_alarm properly
rtc: ds1511: remove partial alarm support
...
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the rtc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-abelloni-v1-1-944c026137c8@marliere.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix the register value comparison in the `max31335_volatile_reg`
function for the interrupt status register.
MAX31335_STATUS1 macro definition corresponds to the actual
interrupt status register.
Fixes: dedaf03b99 ("rtc: max31335: add driver support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240219091616.24480-1-antoniu.miclaus@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.
Fixes: 04d3ba70a3 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This allows both ACPI and Device Tree systems to specify the m41t80 as a
wakeup-source.
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Link: https://lore.kernel.org/r/20240222011129.79241-1-curtis.klein@hpe.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
ds1511_rtc_read_alarm was useless as it is only called at boot time so
the alarm members of pdata have not yet been set. Read the actual registers
so there is a chance to get a meaningful value.
Then, drop the alarm related members of pdata as they are not used anymore.
Link: https://lore.kernel.org/r/20240227230431.1837717-10-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
ds1511_rtc_update_alarm is called twice but one of the call is overkill as
it only has to enable or disable the alarm instead of updating all the alarm
registers. Merge it in its main call site and introduce a new finction to
enable or disable the alarm.
Link: https://lore.kernel.org/r/20240227230431.1837717-7-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
'days' is a s64 (from div_s64), and so should use a %lld specifier.
This was found by extending KUnit's assertion macros to use gcc's
__printf attribute.
Fixes: 1d1bb12a8b ("rtc: Improve performance of rtc_time64_to_tm(). Add tests.")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The NCT3015Y-R and NCT3018Y-R use the same datasheet
but have different topologies as follows.
- Topology (Only 1st i2c can set TWO bit and HF bit)
In NCT3015Y-R,
rtc 1st i2c is connected to a host CPU
rtc 2nd i2c is connected to a BMC
In NCT3018Y-R,
rtc 1st i2c is connected to a BMC
rtc 2nd i2c is connected to a host CPU
In order to be compatible with NCT3015Y-R and NCT3018Y-R,
- In probe,
If part number is NCT3018Y-R, only set HF bit to 24-Hour format.
Else, do nothing
- In set_time,
If part number is NCT3018Y-R && TWO bit is 0,
change TWO bit to 1, and restore TWO bit after updating time.
Signed-off-by: Mia Lin <mimi05633@gmail.com>
Link: https://lore.kernel.org/r/20231113103807.1036978-2-mimi05633@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace of_match_node()->device_get_match_data() for
the data associated with device match.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105145344.204453-3-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On some platforms (eg: RZ/{G2UL,Five} SMARC EVK), there is no IRQ
populated by default. Add irq optional support.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105145344.204453-2-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/rtc/rtc-max31335.c:211:36: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
211 | if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB)
| ^ ~~~~~~~~~~~~~~~~~~~~~~
drivers/rtc/rtc-max31335.c:211:36: note: use '|' for a bitwise operation
211 | if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB)
| ^~
| |
1 error generated.
This clearly should be a comparison against reg. Fix the comparison so
that max31335_volatile_reg() does not always return true.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1980
Fixes: dedaf03b99 ("rtc: max31335: add driver support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240117-rtc-max3133-fix-comparison-v1-1-91e98b29d564@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
