Fix function name in fs/ubifs/io.c kernel-doc comment
to remove some warnings found by clang(make W=1 LLVM=1).
fs/ubifs/io.c:497: warning: expecting prototype for
wbuf_timer_callback(). Prototype was for wbuf_timer_callback_nolock()
instead
fs/ubifs/io.c:513: warning: expecting prototype for new_wbuf_timer().
Prototype was for new_wbuf_timer_nolock() instead
fs/ubifs/io.c:538: warning: expecting prototype for cancel_wbuf_timer().
Prototype was for cancel_wbuf_timer_nolock() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link].
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214785
Reported-by: Chengsong Ke <kechengsong@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Not all ubifs filesystem errors are propagated to userspace.
Export bad magic, bad node and crc errors via sysfs. This allows userspace
to notice filesystem errors:
/sys/fs/ubifs/ubiX_Y/errors_magic
/sys/fs/ubifs/ubiX_Y/errors_node
/sys/fs/ubifs/ubiX_Y/errors_crc
The counters are reset to 0 with a remount.
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Function ubifs_dump_node() has been modified to avoid memory oob
accessing while dumping node, node length (corresponding to the
size of allocated memory for node) should be passed into all node
dumping callers.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit acc5af3efa ("ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len")
No need to avoid memory oob in dumping for data node alone. Later, node
length will be passed into function 'ubifs_dump_node()' which replaces
all node dumping places.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Write buffers use a kmalloc()'ed buffer, they can leak
up to seven bytes of kernel memory to flash if writes are not
aligned.
So use ubifs_pad() to fill these gaps with padding bytes.
This was never a problem while scanning because the scanner logic
manually aligns node lengths and skips over these gaps.
Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Delete repeated words in fs/ubifs/.
{negative, is, of, and, one, it}
where "it it" was changed to "if it".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: linux-fsdevel@vger.kernel.org
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Richard Weinberger <richard@nod.at>
In “ubifs_check_node”, when the value of "node_len" is abnormal,
the code will goto label of "out_len" for execution. Then, in the
following "ubifs_dump_node", if inode type is "UBIFS_DATA_NODE",
in "print_hex_dump", an out-of-bounds access may occur due to the
wrong "ch->len".
Therefore, when the value of "node_len" is abnormal, data length
should to be adjusted to a reasonable safe range. At this time,
structured data is not credible, so dump the corrupted data directly
for analysis.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 246 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With authentication support some nodes (master node, super block node)
get a HMAC embedded into them. This patch adds functions to prepare and
write such a node.
The difficulty is that besides the HMAC the nodes also have a CRC which
must stay valid. This means we first have to initialize all fields in
the node, then calculate the HMAC (not covering the CRC) and finally
calculate the CRC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
When adding authentication support we will embed a HMAC into some
nodes. To prepare these nodes we have to first initialize the nodes,
then add a HMAC and finally add a CRC. To accomplish this add separate
ubifs_init_node/ubifs_crc_node functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
This allows us to have more context in ubifs_assert()
and take different actions depending on the configuration.
Signed-off-by: Richard Weinberger <richard@nod.at>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now wbuf timer has hardcoded timeouts and there is no place for
manual adjustments. Some projects / cases many need that though. Few
file systems allow doing that by respecting dirty_writeback_interval
that can be set using sysctl (dirty_writeback_centisecs).
Lowering dirty_writeback_interval could be some way of dealing with user
space apps lacking proper fsyncs. This is definitely *not* a perfect
solution but we don't have ideal (user space) world. There were already
advanced discussions on this matter, mostly when ext4 was introduced and
it wasn't behaving as ext3. Anyway, the final decision was to add some
hacks to the ext4, as trying to fix whole user space or adding new API
was pointless.
We can't (and shouldn't?) just follow ext4. We can't e.g. sync on close
as this would cause too many commits and flash wearing. On the other
hand we still should allow some trade-off between -o sync and default
wbuf timeout. Respecting dirty_writeback_interval should allow some sane
cutomizations if used warily.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Values of these fields are set during init and never modified. They are
used (read) in a single function only. There isn't really any reason to
keep them in a struct. It only makes struct just a bit bigger without
any visible gain.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In the case where we have more than one volumes on different UBI
devices, it may be not that easy to tell which volume prints the
messages. Add ubi number and volume id in ubifs_msg/warn/error
to help debug. These two values are passed by struct ubifs_info.
For those where ubifs_info is not initialized yet, ubifs_* is
replaced by pr_*. For those where ubifs_info is not avaliable,
ubifs_info is passed to the calling function as a const parameter.
The output looks like,
[ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696
[ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1"
[ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
[ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB)
[ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model
[ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699
[ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2"
[ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB)
[ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model
[ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6)
[ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
When attempting to mount a non-ubifs formatted volume, lots of error
messages (including a stack dump) are thrown to the kernel log even if
the MS_SILENT mount flag is set.
Fix this by introducing adding an additional state-variable in
struct ubifs_info and suppress error messages in ubifs_read_node if
MS_SILENT is set.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
We do not need this feature and to our shame it even was not working
and there was a bug found very recently.
-- Artem Bityutskiy
Without the data type hint UBI2 (fastmap) will be easier to implement.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
This commit re-names all functions which dump something from "dbg_dump_*()" to
"ubifs_dump_*()". This is done for consistency with UBI and because this way it
will be more logical once we remove the debugging sompilation option.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
In case of errors we almost always need the stack dump - it makes no sense
to compile it out. Remove the 'dbg_dump_stack()' function completely.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
This is a clean-up of the power-cut emulation code - remove the custom list of
superblocks which we maintained to find the superblock by the UBI volume
descriptor. We do not need that crud any longer, because now we can get the
superblock as a function argument.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of using 'ubi_read()' function directly, used the 'ubifs_leb_read()'
helper function instead. This allows to get rid of several redundant error
messages and make sure that we always have a stack dump on read errors.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Introduce the following I/O helper functions: 'ubifs_leb_read()',
'ubifs_leb_write()', 'ubifs_leb_change()', 'ubifs_leb_unmap()',
'ubifs_leb_map()', 'ubifs_is_mapped().
The idea is to wrap all UBI I/O functions in order to encapsulate various
assertions and error path handling (error message, stack dump, switching to R/O
mode). And there are some other benefits of this which will be used in the
following patches.
This patch does not switch whole UBIFS to use these functions yet.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When switching to R/O mode due to an I/O error, always dump the stack, not only
when debugging is enabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The current free space fixup can result in some writing to the UBI volume
when the space_fixup flag is set.
To catch instances where UBIFS is writing to the NAND while the space_fixup
flag is set, add an assert to ubifs_write_node().
Artem: tweaked the patch, added similar assertion to the write buffer
write path.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Currently when UBIFS fills up the current bud (which is the last in the journal
head) and switches to the next bud, it first writes the log reference node for
the next bud and only after this synchronizes the write-buffer of the previous
bud. This is not a big deal, but an unclean power cut may lead to a situation
when we have corruption in a next-to-last bud, although it is much more logical
that we have to have corruption only in the last bud.
This patch also removes write-buffer synchronization from
'ubifs_wbuf_seek_nolock()' because this is not needed anymore (we synchronize
the write-buffer explicitly everywhere now) and also because this is just
prone to various errors.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is patch removes an unnecessary 'offs' variable from 'ubifs_wbuf_write_nolock()'
- we can just keep 'wbuf->offs' up-to-date instead. This patch is very minor
the only motivation for it was that it is cleaner to keep wbuf->offs up-to-date
by the time we call 'ubifs_leb_write()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Fix several minor stylistic issues:
* lines longer than 80 characters
* space before closing parenthesis ')'
* spaces in the indentations
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Switch write-buffers from 'c->min_io_size' to 'c->max_write_size' which
presumably has to be more write speed-efficient. However, when write-buffer
is synchronized, write only the the min. I/O units which contain the
data, do not write whole write-buffer. This is more space-efficient.
Additionally, this patch takes into account that the LEB might not start
from the max. write unit-aligned address.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Currently we assume write-buffer size is always min_io_size. But
this is about to change and write-buffers may be of variable size.
Namely, they will be of max_write_size at the beginning, but will
get smaller when we are approaching the end of LEB.
This is a preparation patch which introduces 'size' field in
the write-buffer structure which carries the current write-buffer
size.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is a preparational patch which removes the 'c->always_chk_crc' which was
set during mounting and remounting to R/W mode and introduces 'c->mounting'
flag which is set when mounting. Now the 'c->always_chk_crc' flag is the
same as 'c->remounting_rw && c->mounting'.
This patch is a preparation for the next one which will need to know when we
are mounting and remounting to R/W mode, which is exactly what
'c->always_chk_crc' effectively is, but its name does not suite the
next patch. The other possibility would be to just re-name it, but then
we'd end up with less logical flags coverage.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Commit 2fde99cb55 "UBIFS: mark VFS SB RO too"
introduced regression. This commit made UBIFS set the 'MS_RDONLY' flag in the
VFS superblock when it switches to R/O mode due to an error. This was done
to make VFS show the R/O UBIFS flag in /proc/mounts.
However, several places in UBIFS relied on the 'MS_RDONLY' flag and assume this
flag can only change when we re-mount. For example, 'ubifs_put_super()'.
This patch introduces new UBIFS flag - 'c->ro_mount' which changes only when
we re-mount, and preserves the way UBIFS was originally mounted (R/W or R/O).
This allows us to de-initialize UBIFS cleanly in 'ubifs_put_super()'.
This patch also changes all 'ubifs_assert(!c->ro_media)' assertions to
'ubifs_assert(!c->ro_media && !c->ro_mount)', because we never should write
anything if the FS was mounter R/O.
All the places where we test for 'MS_RDONLY' flag in the VFS SB were changed
and now we test the 'c->ro_mount' flag instead, because it preserves the
original UBIFS mount type, unlike the 'MS_RDONLY' flag.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The R/O state may have various reasons:
1. The UBI volume is R/O
2. The FS is mounted R/O
3. The FS switched to R/O mode because of an error
However, in UBIFS we have only one variable which represents cases
1 and 3 - 'c->ro_media'. Indeed, we set this to 1 if we switch to
R/O mode due to an error, and then we test it in many places to
make sure that we stop writing as soon as the error happens.
But this is very unclean. One consequence of this, for example, is
that in 'ubifs_remount_fs()' we use 'c->ro_media' to check whether
we are in R/O mode because on an error, and we print a message
in this case. However, if we are in R/O mode because the media
is R/O, our message is bogus.
This patch introduces new flag - 'c->ro_error' which is set when
we switch to R/O mode because of an error. It also changes all
"if (c->ro_media)" checks to "if (c->ro_error)" checks, because
this is what the checks actually mean. We do not need to check
for 'c->ro_media' because if the UBI volume is in R/O mode, we
do not allow R/W mounting, and now writes can happen. This is
guaranteed by VFS. But it is good to double-check this, so this
patch also adds many "ubifs_assert(!c->ro_media)" checks.
In the 'ubifs_remount_fs()' function this patch makes a bit more
changes - it fixes the error messages as well.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When an error happens during validation of read node, the typical situation is that
the LEB we read is unmapped (due to some bug). It is handy to include the mapping
status into the error message.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
If some read/write error happens (eg.CRC error), UBIFS swotches to
read-only mode, but the VFS infomation still not update.
This patch add this also make /proc/mounts update.
Signed-off-by: Zhang Jiejing <kzjeef@gmail.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
This patch adds the following minor optimization:
1. If write-buffer does not use the timer, indicate it with the
wbuf->no_timer variable, instead of using the wbuf->softlimit
variable. This is better because wbuf->softlimit is of ktime_t
type, and the ktime_to_ns function contains 64-bit multiplication.
2. Do not call the 'hrtimer_cancel()' function for write-buffers
which do not use timers.
3. Do not cancel the timer in 'ubifs_put_super()' because the
synchronization function does this.
This patch also removes a confusing comment.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
1. Make the I/O debugging message print the journal head number.
2. Add prints to timer functions.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Fix the following warning:
fs/ubifs/io.c: In function 'ubifs_wbuf_init':
fs/ubifs/io.c:860: warning: integer overflow in expression
And limit maximum hrtimer delta to ULONG_MAX because the
argument is 'unsigned long'.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS uses timers for write-buffer write-back. It is not
crucial for us to write-back exactly on time. We are fine
to write-back a little earlier or later. And this means
we may optimize UBIFS timer so that it could be groped
with a close timer event, so that the CPU would not be
waken up just to do the write back. This is optimization
to lessen power consumption, which is important in
embedded devices UBIFS is used for.
hrtimers have a nice feature: they are effectively range
timers, and we may defind the soft and hard limits for
it. Standard timers do not have these feature. They may
only be made deferrable, but this means there is effectively
no hard limit. So, we will better use hrtimers.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When data CRC checking is disabled, UBIFS returns incorrect return
code from the 'try_read_node()' function (0 instead of 1, which means
CRC error), which make the caller re-read the data node again, but using
a different code patch, so the second read is fine. Thus, we read the
same node twice. And the result of this is that UBIFS is slower
with no_chk_data_crc option than it is with chk_data_crc option.
This patches fixes the problem.
Reported-by: Reuben Dowle <Reuben.Dowle@navico.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When UBIFS switches to R/O mode because of an error,
it is reasonable to enable data CRC checking.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS read performance can be improved by skipping the CRC
check when data nodes are read. This option can be used if
the underlying media is considered to be highly reliable.
Note that CRCs are always checked for metadata.
Read speed on Arm platform with OneNAND goes from 19 MiB/s
to 27 MiB/s with data CRC checking disabled.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
We use ubifs_ro_mode() quite a lot, and not in fast-path, so
there is no reason to blow the code up by having it inlined.
Also, we usually want R/O mode change to be seen to other
CPUs as soon as possible, so when we make this a function
call, we will automatically have a memory barrier.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
