Remove redundant 'AND' with cpu_online_mask as the policy->cpus always
contains only the currently online CPUs.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/lkml/20231003050019.a6mcchw2o2z2wkrh@vireshk-i7/
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
[ Viresh: Fix rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use reference clock count based loop instead of "udelay()" for
sampling of counters to improve the accuracy of re-generated CPU
frequency. "udelay()" internally calls "WFE" which stops the
counters and results in bigger delta between the last set freq
and the re-generated value from counters. The counter sampling
window used in loop is the minimum number of reference clock
cycles which is known to give a stable value of CPU frequency.
The change also helps to reduce the sampling window from "500us"
to "<50us".
Suggested-by: Antti Miettinen <amiettinen@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently, we make SMP call on every frequency set request to get the
physical 'CPU ID' and 'CLUSTER ID' for the target CPU. This change
optimizes the repeated calls by storing the physical IDs and the per
core frequency register offset for all CPUs during boot. Later this
info is used directly when required to set the frequency or read it
from ACTMON counters.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
MSM8909 uses qcom-cpufreq-nvmem to attach power domains and to parse the
speedbin from NVMEM (for opp-supported-hw).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Viresh: Fixed order in table ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm QCM6490 platform uses the qcom-cpufreq-hw driver, so add it
to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The boost control currently applies to the whole system. However, users
may prefer to boost a subset of cores in order to provide prioritized
performance to workloads running on the boosted cores.
Enable per-policy boost by adding a 'boost' sysfs interface under each
policy path. This can be found at:
/sys/devices/system/cpu/cpufreq/policy<*>/boost
Same to the global boost switch, writing 1/0 to the per-policy 'boost'
enables/disables boost on a cpufreq policy respectively.
The user view of global and per-policy boost controls should be:
1. Enabling global boost initially enables boost on all policies, and
per-policy boost can then be enabled or disabled individually, given that
the platform does support so.
2. Disabling global boost makes the per-policy boost interface illegal.
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pcc_cpufreq_target():
cpufreq_freq_transition_begin();
spin_lock(&pcc_lock);
[critical section]
cpufreq_freq_transition_end();
spin_unlock(&pcc_lock);
Above code has a performance issue, consider that Task0 executes
'cpufreq_freq_transition_end()' to wake Task1 and preempted imediatedly
without releasing 'pcc_lock', then Task1 needs to wait for Task0 to
release 'pcc_lock'. In the worst case, this locking order can result in
Task1 wasting two scheduling rounds before it can enter the critical
section.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Due to the kobject embedded in the dbs_data doest not has a release()
method yet, it needs to use kfree() to free dbs_data directly when
governor fails to allocate the tunner field of dbs_data.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The field 'transition_task' of policy structure is used to track the
task which is performing the frequency transition. Using this field to
print a warning once detect a case where the same task is calling
_begin() again before completing the preivous frequency transition via
the _end().
However, there is a potential race condition in _end() and _begin() APIs
while updating the field 'transition_task' of policy, the scenario is
depicted below:
Task A Task B
/* 1st freq transition */
Invoke _begin() {
...
...
}
/* 2nd freq transition */
Invoke _begin() {
... //waiting for A to
... //clear
... //transition_ongoing
... //in _end() for
... //the 1st transition
|
Change the frequency |
|
Invoke _end() { |
... |
... |
transition_ongoing = false; V
transition_ongoing = true;
transition_task = current;
transition_task = NULL;
... //A overwrites the task
... //performing the transition
... //result in error warning.
}
To fix this race condition, the transition_lock of policy structure is
now acquired before updating policy structure in _end() API. Which ensure
that only one task can update the 'transition_task' field at a time.
Link: https://lore.kernel.org/all/b3c61d8a-d52d-3136-fbf0-d1de9f1ba411@huawei.com/
Fixes: ca654dc3a9 ("cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pointer value of policy and driver structure are currently printed
in the error messages of cpufreq_resume(), this is not recommended and
helpful.
In order to be consistent with the error message in cpufreq_suspend()
and easier to understand, print the name of driver strcture and the
manage CPU of policy structure individually in the error messages of
cpufreq_resume().
Link: https://lore.kernel.org/all/b7be717c-41d8-bbbf-3e97-3799948ab757@huawei.com
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Migrate various platforms to use remove callback returning void
(Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang
and Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva).
-----BEGIN PGP SIGNATURE-----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=o0wB
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 6.6 from Viresh Kumar:
"- Migrate various platforms to use remove callback returning void
(Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang
and Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)."
* tag 'cpufreq-arm-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (33 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
cpufreq: Prefer to print cpuid in MIN/MAX QoS register error message
cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value
cpufreq: mediatek-hw: Remove unused define
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug
cpufreq: blocklist MSM8998 in cpufreq-dt-platdev
cpufreq: omap: Convert to platform remove callback returning void
cpufreq: qoriq: Convert to platform remove callback returning void
cpufreq: acpi: Convert to platform remove callback returning void
cpufreq: tegra186: Convert to platform remove callback returning void
cpufreq: qcom-nvmem: Convert to platform remove callback returning void
cpufreq: kirkwood: Convert to platform remove callback returning void
cpufreq: pcc-cpufreq: Convert to platform remove callback returning void
...
Add exit hook and remove OPP table when the device gets unregistered.
This will fix the error messages when the CPU FREQ driver module is
removed and then re-inserted. It also fixes these messages while
onlining the first CPU from a policy whose all CPU's were previously
offlined.
debugfs: File 'cpu5' in directory 'opp' already present!
debugfs: File 'cpu6' in directory 'opp' already present!
debugfs: File 'cpu7' in directory 'opp' already present!
Fixes: f41e1442ac ("cpufreq: tegra194: add OPP support and set bandwidth")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
[ Viresh: Dropped irrelevant change from it ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.
Fixes: c3274763bf ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Implement the light-weight tear down and bring up helpers to reduce the
amount of work to do on CPU offline/online operation.
This change helps to make the hotplugging paths much faster.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/lkml/20230816033402.3abmugb5goypvllm@vireshk-i7/
[ Viresh: Fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support for up to 4 frequency domains as used on new
platforms.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In amd-pstate-ut, shared memory-based systems call
get_shared_mem() as part of amd_pstate_ut_check_enabled()
function. This function was written when CONFIG_X86_AMD_PSTATE
was tristate config and amd_pstate can be built as a module.
Currently CONFIG_X86_AMD_PSTATE is a boolean config and module
parameter shared_mem is removed. But amd-pstate-ut code still
accesses this module parameter. Remove those accesses.
Fixes: 456ca88d8a ("cpufreq: amd-pstate: change amd-pstate driver to be built-in type")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Meng Li <li.meng@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Suggested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The intel_pstate CPU frequency scaling driver does not
use policy->cur and it is 0.
When the CPU frequency is outdated arch_freq_get_on_cpu()
will default to the nominal clock frequency when its call to
cpufreq_quick_getpolicy_cur returns the never updated 0.
Thus, the listed frequency might be outside of currently
set limits. Some users are complaining about the high
reported frequency, albeit stale, when their system is
idle and/or it is above the reduced maximum they have set.
This patch will maintain policy_cur for the intel_pstate
driver at the current minimum CPU frequency.
Reported-by: Yang Jie <yang.jie@linux.intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217597
Signed-off-by: Doug Smythies <dsmythies@telus.net>
[ rjw: White space damage fixes and comment adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the worst case, the freq_table of policy data is not sorted and
contains duplicate frequencies, this means that it needs to iterate
through the entire freq_table of policy to ensure each frequency is
unique in the freq_table of stats data, this has a time complexity of
O(N^2), where N is the number of frequencies in the freq_table of
policy.
However, if the policy.freq_table is already sorted and contains no
duplicate frequencies, it can reduce the time complexity of creating
stats.freq_table to O(N), the 'freq_table_sorted' field of policy data
can be used to indicate whether the policy.freq_table is sorted.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
[ rjw: Fix typo in changelog, remove redundant parens ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function cppc_freq_invariance_init() may failed to create
kworker_fie, make it more robust by setting fie_disabled to FIE_DISBALED
to prevent an invalid pointer dereference in kthread_destroy_worker(),
which called from cppc_freq_invariance_exit().
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The cpufreq framework used to use the zero of return value to reflect
the cppc_cpufreq_get_rate() had failed to get current frequecy and treat
all positive integer to be succeed. Since cppc_get_perf_ctrs() returns a
negative integer in error case, so it is better to convert the value to
zero as the return value of cppc_cpufreq_get_rate().
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When a cpufreq_policy is allocated, the cpus, related_cpus and real_cpus
of policy are still unset. Therefore, it is preferable to print the
passed 'cpu' parameter instead of a empty 'cpus' cpumask in error
message when registering MIN/MAX QoS notifier fails.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The previous function amd_get_highest_perf() will be deprecated.
It can only return 166 or 255 by cpuinfo. For platforms that
support preferred core, the value of highest perf can be between
166 and 255. Therefore, it will cause amd-pstate-ut to fail when
run amd_pstate_ut_check_perf().
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
DYNAMIC_POWER does not seem to be used anywhere in the tree, remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
All Qualcomm platforms utilizing the qcom-cpufreq-hw driver have no
business in using cpufreq-dt. Prevent that from happening.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In commit 3666062b87 ("cpufreq: amd-pstate: move to use bus_get_dev_root()")
the "amd_pstate" attributes where moved from a dedicated kobject to the
cpu root kobject.
While the dedicated kobject expects to contain kobj_attributes the root
kobject needs device_attributes.
As the changed arguments are not used by the callbacks it works most of
the time.
However CFI will detect this issue:
[ 4947.849350] CFI failure at dev_attr_show+0x24/0x60 (target: show_status+0x0/0x70; expected type: 0x8651b1de)
...
[ 4947.849409] Call Trace:
[ 4947.849410] <TASK>
[ 4947.849411] ? __warn+0xcf/0x1c0
[ 4947.849414] ? dev_attr_show+0x24/0x60
[ 4947.849415] ? report_cfi_failure+0x4e/0x60
[ 4947.849417] ? handle_cfi_failure+0x14c/0x1d0
[ 4947.849419] ? __cfi_show_status+0x10/0x10
[ 4947.849420] ? handle_bug+0x4f/0x90
[ 4947.849421] ? exc_invalid_op+0x1a/0x60
[ 4947.849422] ? asm_exc_invalid_op+0x1a/0x20
[ 4947.849424] ? __cfi_show_status+0x10/0x10
[ 4947.849425] ? dev_attr_show+0x24/0x60
[ 4947.849426] sysfs_kf_seq_show+0xa6/0x110
[ 4947.849433] seq_read_iter+0x16c/0x4b0
[ 4947.849436] vfs_read+0x272/0x2d0
[ 4947.849438] ksys_read+0x72/0xe0
[ 4947.849439] do_syscall_64+0x76/0xb0
[ 4947.849440] ? do_user_addr_fault+0x252/0x650
[ 4947.849442] ? exc_page_fault+0x7a/0x1b0
[ 4947.849443] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes: 3666062b87 ("cpufreq: amd-pstate: move to use bus_get_dev_root()")
Reported-by: Jannik Glückert <jannik.glueckert@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217765
Link: https://lore.kernel.org/lkml/c7f1bf9b-b183-bf6e-1cbb-d43f72494083@gmail.com/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allocate extra space for terminating element at:
drivers/cpufreq/brcmstb-avs-cpufreq.c:
449 table[i].frequency = CPUFREQ_TABLE_END;
and add code comment to make this clear.
This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
449 | table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/cpufreq.h:12,
from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
323 | return devm_kmalloc(dev, bytes, flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.
Link: https://github.com/KSPP/linux/issues/324
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the MSM8998 to the blocklist since the CPU scaling on this platform
is handled by a separate driver.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
