strncpy() is deprecated for use on NUL-terminated destination strings [0]
and as such we should prefer more robust and less ambiguous string interfaces.
The CAPI (part II) [1] states that the manufacturer id should be a
"zero-terminated ASCII string" and should "always [be] zero-terminated."
Much the same for the serial number: "The serial number, a seven-digit
number coded as a zero-terminated ASCII string".
Along with this, its clear the original author intended for these
buffers to be NUL-padded as well. To meet the specification as well as
properly NUL-pad, use strscpy_pad().
In doing this, an opportunity to simplify this code is also present.
Remove the min_t() and combine the length check into the main if.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [0]
Link: https://capi.org/downloads.html [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba3369 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For tracking multiple devices concurrently with a condition.
The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk
on RTL8852B controller.
The quirk setting is based on commit 9e14606d8f ("Bluetooth: msft:
Extended monitor tracking by address filter")
With this setting, when a pattern monitor detects a device, this
feature issues an address monitor for tracking that device. Let the
original pattern monitor keep monitor new devices.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A LED trigger's activate() callback gets called when the LED trigger
gets activated for a specific LED, so that the trigger code can ensure
the LED state matches the current state of the trigger condition
(LED_FULL when HCI_UP is set in this case).
led_trigger_event() is intended for trigger condition state changes and
iterates over _all_ LEDs which are controlled by this trigger changing
the brightness of each of them.
In the activate() case only the brightness of the LED which is being
activated needs to change and that LED is passed as an argument to
activate(), switch to led_set_brightness() to only change the brightness
of the LED being activated.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.
No functional change intended.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Starting a BCM UART controller not defined as a platform device or
a serdev with "btattach -B /dev/ttyS1 -P bcm -S 3000000" works fine
but the serial port remains at the init_speed, i.e. 115200.
The oper_speed is only set if a device is declared in ACPI, device
tree or as a platform device.
This commit copies the serial port speed fixed by hciattach to the
oper_speed on line discipline opening.
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since kzalloc already zeroes the allocated memory, the subsequent
memset call is unnecessary. This patch removes the redundant memset to
clean up the code and enhance efficiency.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Describe the inputs from the PMU that the Bluetooth module on wcn6855
consumes and drop the ones from the host. This breaks the current
contract but the only two users of wcn6855 upstream - sc8280xp based
boards - will be updated in DTS patches sent separately while the
hci_qca driver will remain backwards compatible with older DT sources.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables btnxpuart driver to handle ISO RX packet when DUT is
configured as audio sink.
Tested IW612 on iMX8MMini platform and BlueZ-5.77 as follows:
1) Configured DUT with bap_bcast_sink role in pipewire configuration file.
2) Started pipewire and DUT is able to sync with Broadcast source through
pipewire.
3) ISO data RX is seen in btmon.
4) Audio/Music is heard on audio jack.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Tested-by: Sarveshwar Bajaj <sarveshwar.bajaj@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds ISO packet support in h4_recv.h, which was created before ISO
packet handling was added to hci_h4.c and hci_uart.c
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This inverts the LE State flag so by default we assume the controllers
would report valid states rather than invalid so it is inline with the
respective quirk (HCI_QUIRK_BROKEN_LE_STATES).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Amlogic Bluetooth entry to MAINTAINERS to clarify the maintainers
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a new HCI protocol HCI_UART_AML for the Amlogic Bluetooth
controller. It works on the standard H4 protocol via a 4-wire UART
interface, with baud rates up to 4 Mbps.
The controller supports two types of commands: the TCI commands and the
vendor command. The former is for initial setup including setting baud
rates, downloading fw, starting chip and etc, while the latter is for
dumping firmware versions and setting public address after firmware
updates and normal startup.
It was verified on board of T602 (S905X4 + W265S2).
dmesg:
..
[ 5.313450] Bluetooth: HCI UART protocol AML registered
[ 6.506052] Bluetooth: hci0: fw_version: date = 42.28, number = 0xb2fd
...
Co-developed-by: Ye He <ye.he@amlogic.com>
Signed-off-by: Ye He <ye.he@amlogic.com>
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add binding document for Amlogic Bluetooth chipsets attached over UART.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for handling ISO RX and TX packets.
Signed-off-by: Kiran <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a helper function hci_iso_hdr() to extract iso header from skb.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- Move declaration of interface_lock outside of CONFIG_TIMERLAT_TRACER
The fix to some locking races moved the declaration of the
interface_lock up in the file, but also moved it into the
CONFIG_TIMERLAT_TRACER #ifdef block, breaking the build when
that wasn't set. Move it further up and out of that #ifdef block.
- Remove unused function run_tracer_selftest() stub
When CONFIG_FTRACE_STARTUP_TEST is not set the stub function
run_tracer_selftest() is not used and clang is warning about it.
Remove the function stub as it is not needed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZt9WIRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj2PAPsHsAHxF4oPhXi9UmGHH+l0NcWm87U2
B5JE+73M+RaDQgD/WpdGJaQRudUwic0wu+aHXzMFae3DVd/WUjWbGnlo5gI=
=pS08
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Move declaration of interface_lock outside of CONFIG_TIMERLAT_TRACER
The fix to some locking races moved the declaration of the
interface_lock up in the file, but also moved it into the
CONFIG_TIMERLAT_TRACER #ifdef block, breaking the build when that
wasn't set. Move it further up and out of that #ifdef block.
- Remove unused function run_tracer_selftest() stub
When CONFIG_FTRACE_STARTUP_TEST is not set the stub function
run_tracer_selftest() is not used and clang is warning about it.
Remove the function stub as it is not needed.
* tag 'trace-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Drop unused helper function to fix the build
tracing/osnoise: Fix build when timerlat is not enabled
This reverts commit defd28aa5a.
Recover the code to disable premapped mode.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Takero Funaki <flintglass@gmail.com>
Link: https://patch.msgid.link/20240906123137.108741-2-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.
When I am verifying iperf3 over UDP, the network hangs.
Like the log below.
root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0
Connecting to host 192.168.100.100, port 5201
[ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%)
[ 4] Sent 20 datagrams
iperf3: error - the server has terminated
The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.
Fixes: 10cbd64076 ("ftgmac100: Rework NAPI & interrupts handling")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Was slightly misleading before, because printed is pointer to fwnode,
not to phy device, as placement in message suggested. Include header
for dev_dbg() declaration while at it.
Output before:
[ +0.001247] mdio_bus f802c000.ethernet-ffffffff: registered phy 2612f00a fwnode at address 3
Output after:
[ +0.001229] mdio_bus f802c000.ethernet-ffffffff: registered phy fwnode /ahb/apb/ethernet@f802c000/ethernet-phy@3 at address 3
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20240906062256.11289-1-ada@thorsis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Fixes: 5d9b976d44 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit 48b6190a00 ("net/smc: Limit SMC visits when handshake workqueue congested"),
we introduce a mechanism to put constraint on SMC connections visit
according to the pressure of SMC handshake process.
At that time, we believed that controlling the feature through netlink
was sufficient. However, most people have realized now that netlink is
not convenient in container scenarios, and sysctl is a more suitable
approach.
In addition, since commit 462791bbfa ("net/smc: add sysctl interface for SMC")
had introcuded smc_sysctl_net_init(), it is reasonable for us to
initialize limit_smc_hs in it instead of initializing it in
smc_pnet_net_int().
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Link: https://patch.msgid.link/1725590135-5631-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds support to show firmware version information for both stored and
running firmware versions. The version and commit is displayed separately
to aid monitoring tools which only care about the version.
Example output:
# devlink dev info
pci/0000:01:00.0:
driver fbnic
serial_number 88-25-08-ff-ff-01-50-92
versions:
running:
fw 24.07.15-017
fw.commit h999784ae9df0
fw.bootloader 24.07.10-000
fw.bootloader.commit hfef3ac835ce7
stored:
fw 24.07.24-002
fw.commit hc9d14a68b3f2
fw.bootloader 24.07.22-000
fw.bootloader.commit h922f8493eb96
fw.undi 01.00.03-000
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Machon says:
====================
net: lan966x: use the newly introduced FDMA library
This patch series is the second of a 2-part series [1], that adds a new
common FDMA library for Microchip switch chips Sparx5 and lan966x. These
chips share the same FDMA engine, and as such will benefit from a common
library with a common implementation. This also has the benefit of
removing a lot of open-coded bookkeeping and duplicate code for the two
drivers.
In this second series, the FDMA library will be taken into use by the
lan966x switch driver.
###################
# Example of use: #
###################
- Initialize the rx and tx fdma structs with values for: number of
DCB's, number of DB's, channel ID, DB size (data buffer size), and
total size of the requested memory. Also provide two callbacks:
nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr.
- Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent().
- Initialize the DCB's with fdma_dcb_init().
- Add new DCB's with fdma_dcb_add().
- Free memory with fdma_free_phys() or fdma_free_coherent().
#####################
# Patch breakdown: #
#####################
Patch #1: select FDMA library for lan966x.
Patch #2: includes the fdma_api.h header and removes old symbols.
Patch #3: replaces old rx and tx variables with equivalent ones from the
fdma struct. Only the variables that can be changed without
breaking traffic is changed in this patch.
Patch #4: uses the library for allocation of rx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #5: uses the library for adding DCB's in the rx path.
Patch #6: uses the library for freeing rx buffers.
Patch #7: uses the library for allocation of tx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #8: uses the library for adding DCB's in the tx path.
Patch #9: uses the library helpers in the tx path.
Patch #10: ditch last_in_use variable and use library instead.
Patch #11: uses library helpers throughout.
Patch #12: refactor lan966x_fdma_reload() function.
[1] https://lore.kernel.org/netdev/20240902-fdma-sparx5-v1-0-1e7d5e5a9f34@microchip.com/
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
====================
Link: https://patch.msgid.link/20240905-fdma-lan966x-v1-0-e083f8620165@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we store everything in the fdma structs, refactor
lan966x_fdma_reload() to store and restore the entire struct.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The library provides helpers for a number of DCB and DB operations. Use
these throughout the code and remove the old ones.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This variable is used in the tx path to determine the last used DCB. The
library has the variable last_dcb for the exact same purpose. Ditch the
last_in_use variable throughout.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: tx->dma, tx->dcbs and tx->curr_entry
with the equivalents from the FDMA struct.
- add lan966x_fdma_tx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the fdma_dcb_add() function to add DCB's in the rx path. This gets
rid of the open-coding of nextptr and dataptr handling and the functions
for adding DCB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: rx->dma, rx->dcbs and rx->last_entry
with the equivalents from the FDMA struct.
- make use of fdma->db_size for rx buffer size.
- add lan966x_fdma_rx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace the old rx and tx variables: channel_id, FDMA_DCB_MAX,
FDMA_RX_DCB_MAX_DBS, FDMA_TX_DCB_MAX_DBS, dcb_index and db_index with
the equivalents from the FDMA rx and tx structs. These variables are not
entangled in any buffer allocation and can therefore be replaced in
advance.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Include and use the new FDMA header, which now provides the required
masks and bit offsets for operating on the DCB's and DB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Brett Creeley says:
====================
ionic: convert Rx queue buffers to use page_pool
Our home-grown buffer management needs to go away and we need to play
nicely with the page_pool infrastructure. This patchset cleans up some
of our API use and converts the Rx traffic queues to use page_pool.
The first few patches are for tidying up things, then a small XDP
configuration refactor, adding page_pool support, and finally adding
support to hot swap an XDP program without having to reconfigure
anything.
The result is code that more closely follows current patterns, as well as
a either a performance boost or equivalent performance as seen with
iperf testing:
mss netio tx_pps rx_pps total_pps tx_bw rx_bw total_bw
---- ------- ---------- ---------- ----------- ------- ------- ----------
Before:
256 bidir 13,839,293 15,515,227 29,354,520 34 38 71
512 bidir 13,913,249 14,671,693 28,584,942 62 65 127
1024 bidir 13,006,189 13,695,413 26,701,602 109 115 224
1448 bidir 12,489,905 12,791,734 25,281,639 145 149 294
2048 bidir 9,195,622 9,247,649 18,443,271 148 149 297
4096 bidir 5,149,716 5,247,917 10,397,633 160 163 323
8192 bidir 3,029,993 3,008,882 6,038,875 179 179 358
9000 bidir 2,789,358 2,800,744 5,590,102 181 180 361
After:
256 bidir 21,540,037 21,344,644 42,884,681 52 52 104
512 bidir 23,170,014 19,207,260 42,377,274 103 85 188
1024 bidir 17,934,280 17,819,247 35,753,527 150 149 299
1448 bidir 15,242,515 14,907,030 30,149,545 167 174 341
2048 bidir 10,692,542 10,663,023 21,355,565 177 176 353
4096 bidir 6,024,977 6,083,580 12,108,557 187 180 367
8192 bidir 3,090,449 3,048,266 6,138,715 180 176 356
9000 bidir 2,859,146 2,864,226 5,723,372 178 180 358
v2: https://lore.kernel.org/20240826184422.21895-1-brett.creeley@amd.com
v1: https://lore.kernel.org/20240625165658.34598-1-shannon.nelson@amd.com
====================
Link: https://patch.msgid.link/20240906232623.39651-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using examples of other driver(s), add the ability to hot-swap an XDP
program without having to reconfigure the queues. To prevent the
q->xdp_prog to be read/written more than once use READ_ONCE() and
WRITE_ONCE() on the q->xdp_prog.
The q->xdp_prog was being checked in multiple different for loops in the
hot path. The change to allow xdp_prog hot swapping created the
possibility for many READ_ONCE(q->xdp_prog) calls during a single napi
callback. Refactor the Rx napi handling to allow a previous
READ_ONCE(q->xdp_prog) (or NULL for hwstamp_rxq) to be passed into the
relevant functions.
Also, move other Rx related hotpath handling into the newly created
ionic_rx_cq_service() function to reduce the scope of the xdp_prog
local variable and put all Rx handling in one function similar to Tx.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-8-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our home-grown buffer management needs to go away and we need
to be playing nicely with the page_pool infrastructure. This
converts the Rx traffic queues to use page_pool.
Also, since ionic_rx_buf_size() was removed, redefine
IONIC_PAGE_SIZE to account for IONIC_MAX_BUF_LEN being the
largest allowed buffer to prevent overflowing u16 variables,
which could happen when PAGE_SIZE is defined as >= 64KB.
include/linux/minmax.h:93:37: warning: conversion from 'long unsigned int' to 'u16' {aka 'short unsigned int'} changes value from '65536' to '0' [-Woverflow]
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-7-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently when going to/from a NULL XDP program the driver uses
ionic_stop_queues_reconfig() and then ionic_start_queues_reconfig() in
order to re-register the xdp_rxq_info and re-init the queues. This is
fine until page_pool(s) are used in an upcoming patch.
In preparation for adding page_pool support make sure to completely
rebuild the queues when going to/from a NULL XDP program. Without this
change the call to mem_allocator_disconnect() never happens when going
to a NULL XDP program, which eventually results in
xdp_rxq_info_reg_mem_model() failing with -ENOSPC due to the mem_id_pool
ida having no remaining space.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-6-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
