Commit Graph

34 Commits

Author SHA1 Message Date
Neale Ferguson
c07127b48c dlm: fix missing endian conversion of rcom_status flags
The flags are already converted to le when being sent,
but are not being converted back to cpu when received.

Signed-off-by: Neale Ferguson <neale@sinenomine.net>
Signed-off-by: David Teigland <teigland@redhat.com>
2014-10-14 15:11:48 -05:00
David Teigland
475f230c60 dlm: fix unlock balance warnings
The in_recovery rw_semaphore has always been acquired and
released by different threads by design.  To work around
the "BUG: bad unlock balance detected!" messages, adjust
things so the dlm_recoverd thread always does both down_write
and up_write.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-08-08 11:33:49 -05:00
David Teigland
1d7c484eeb dlm: use idr instead of list for recovered rsbs
When a large number of resources are being recovered,
a linear search of the recover_list takes a long time.
Use an idr in place of a list.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-07-16 14:17:52 -05:00
David Teigland
c04fecb4d9 dlm: use rsbtbl as resource directory
Remove the dir hash table (dirtbl), and use
the rsb hash table (rsbtbl) as the resource
directory.  It has always been an unnecessary
duplication of information.

This improves efficiency by using a single rsbtbl
lookup in many cases where both rsbtbl and dirtbl
lookups were needed previously.

This eliminates the need to handle cases of rsbtbl
and dirtbl being out of sync.

In many cases there will be memory savings because
the dir hash table no longer exists.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-07-16 14:16:19 -05:00
David Teigland
4875647a08 dlm: fixes for nodir mode
The "nodir" mode (statically assign master nodes instead
of using the resource directory) has always been highly
experimental, and never seriously used.  This commit
fixes a number of problems, making nodir much more usable.

- Major change to recovery: recover all locks and restart
  all in-progress operations after recovery.  In some
  cases it's not possible to know which in-progess locks
  to recover, so recover all.  (Most require recovery
  in nodir mode anyway since rehashing changes most
  master nodes.)

- Change the way nodir mode is enabled, from a command
  line mount arg passed through gfs2, into a sysfs
  file managed by dlm_controld, consistent with the
  other config settings.

- Allow recovering MSTCPY locks on an rsb that has not
  yet been turned into a master copy.

- Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages
  from a previous, aborted recovery cycle.  Base this
  on the local recovery status not being in the state
  where any nodes should be sending LOCK messages for the
  current recovery cycle.

- Hold rsb lock around dlm_purge_mstcpy_locks() because it
  may run concurrently with dlm_recover_master_copy().

- Maintain highbast on process-copy lkb's (in addition to
  the master as is usual), because the lkb can switch
  back and forth between being a master and being a
  process copy as the master node changes in recovery.

- When recovering MSTCPY locks, flag rsb's that have
  non-empty convert or waiting queues for granting
  at the end of recovery.  (Rename flag from LOCKS_PURGED
  to RECOVER_GRANT and similar for the recovery function,
  because it's not only resources with purged locks
  that need grant a grant attempt.)

- Replace a couple of unnecessary assertion panics with
  error messages.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-05-02 14:15:27 -05:00
David Teigland
d6e24788d2 dlm: limit rcom debug messages
Unify the checking for both types of ignored
rcom messages, and replace the two log_debug
statements with a single, rate limited debug
message.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 15:37:37 -05:00
David Teigland
757a427196 dlm: add node slots and generation
Slot numbers are assigned to nodes when they join the lockspace.
The slot number chosen is the minimum unused value starting at 1.
Once a node is assigned a slot, that slot number will not change
while the node remains a lockspace member.  If the node leaves
and rejoins it can be assigned a new slot number.

A new generation number is also added to a lockspace.  It is
set and incremented during each recovery along with the slot
collection/assignment.

The slot numbers will be passed to gfs2 which will use them as
journal id's.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04 08:55:57 -06:00
David Teigland
8304d6f24c dlm: record full callback state
Change how callbacks are recorded for locks.  Previously, information
about multiple callbacks was combined into a couple of variables that
indicated what the end result should be.  In some situations, we
could not tell from this combined state what the exact sequence of
callbacks were, and would end up either delivering the callbacks in
the wrong order, or suppress redundant callbacks incorrectly.  This
new approach records all the data for each callback, leaving no
uncertainty about what needs to be delivered.

Signed-off-by: David Teigland <teigland@redhat.com>
2011-03-10 10:40:00 -06:00
David Teigland
573c24c4af dlm: always use GFP_NOFS
Replace all GFP_KERNEL and ls_allocation with GFP_NOFS.
ls_allocation would be GFP_KERNEL for userland lockspaces
and GFP_NOFS for file system lockspaces.

It was discovered that any lockspaces on the system can
affect all others by triggering memory reclaim in the
file system which could in turn call back into the dlm
to acquire locks, deadlocking dlm threads that were
shared by all lockspaces, like dlm_recv.

Signed-off-by: David Teigland <teigland@redhat.com>
2009-11-30 16:34:43 -06:00
David Teigland
599e0f584d dlm: fix rcom_names message to self
The recent patch to validate data lengths in rcom_names messages
failed to account for fake messages a node directs to itself before
ever sending it.  In this case we need to fill in the message length
in the header for the validation code to use.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-21 15:19:54 -06:00
David Teigland
e5dae548b0 dlm: proper types for asts and basts
Use proper types for ast and bast functions, and use
consistent type for ast param.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-06 00:35:45 -06:00
Al Viro
ae773d0b74 dlm: verify that places expecting rcom_lock have packet long enough
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:25:09 -06:00
Al Viro
02ed16b64d dlm: missing length check in check_config()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:24:20 -06:00
Al Viro
4007685c6e dlm: use proper type for ->ls_recover_buf
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:24:07 -06:00
Al Viro
93ff2971e9 dlm: do not byteswap rcom_config
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:23:43 -06:00
Al Viro
163a1859ec dlm: do not byteswap rcom_lock
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:23:14 -06:00
David Teigland
dbcfc34733 dlm: clean ups
A couple small clean-ups.  Remove unnecessary wrapper-functions in
rcom.c, and remove unnecessary casting and an unnecessary ASSERT in
util.c.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:43 -06:00
David Teigland
c36258b592 [DLM] block dlm_recv in recovery transition
Introduce a per-lockspace rwsem that's held in read mode by dlm_recv
threads while working in the dlm.  This allows dlm_recv activity to be
suspended when the lockspace transitions to, from and between recovery
cycles.

The specific bug prompting this change is one where an in-progress
recovery cycle is aborted by a new recovery cycle.  While dlm_recv was
processing a recovery message, the recovery cycle was aborted and
dlm_recoverd began cleaning up.  dlm_recv decremented recover_locks_count
on an rsb after dlm_recoverd had reset it to zero.  This is fixed by
suspending dlm_recv (taking write lock on the rwsem) before aborting the
current recovery.

The transitions to/from normal and recovery modes are simplified by using
this new ability to block dlm_recv.  The switch from normal to recovery
mode means dlm_recv goes from processing locking messages, to saving them
for later, and vice versa.  Races are avoided by blocking dlm_recv when
setting the flag that switches between modes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:38 +01:00
David Teigland
41684f9547 [DLM] fix NULL ls usage
Fix regression in recent patch "[DLM] variable allocation" which
attempts to dereference an "ls" struct when it's NULL.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-14 10:28:44 +01:00
Patrick Caulfield
44f487a553 [DLM] variable allocation
Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace.
This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL.
(This updated version of the patch uses gfp_t for ls_allocation.)

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-Off-By: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:17 +01:00
David Teigland
8b0e7b2cf3 [DLM] wait for config check during join [6/6]
Joining the lockspace should wait for the initial round of inter-node
config checks to complete before returning.  This way, if there's a
configuration mismatch between the joining node and the existing nodes,
the join can fail and return an error to the application.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:42 +01:00
David Teigland
68c817a1c4 [DLM] rename dlm_config_info fields
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we
can use macros to add configfs functions to access them (in a later
patch).  No functional changes in this patch, just naming changes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:37 -05:00
David Teigland
8ec6886748 [DLM] change some log_error to log_debug
Some common, non-error messages should use log_debug instead of log_error
so they can be turned off.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:34 -05:00
David Teigland
9e971b715d [DLM] add version check
Check if we receive a message from another lockspace member running a
version of the dlm with an incompatible inter-node message protocol.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:35:53 -05:00
David Teigland
38aa8b0c59 [DLM] fix old rcom messages
A reply to a recovery message will often be received after the relevant
recovery sequence has aborted and the next recovery sequence has begun.
We need to ignore replies to these old messages from the previous
recovery.  There's already a way to do this for synchronous recovery
requests using the rc_id number, but not for async.

Each recovery sequence already has a locally unique sequence number
associated with it.  This patch adds a field to the rcom (recovery
message) structure where this recovery sequence number can be placed,
rc_seq.  When a node sends a reply to a recovery request, it copies the
rc_seq number it received into rc_seq_reply.  When the first node receives
the reply to its recovery message, it will check whether rc_seq_reply
matches the current recovery sequence number, ls_recover_seq, and if not
then it ignores the old reply.

An old, inadequate approach to filtering out old replies (checking if the
current stage of recovery has moved back to the start) has been removed
from two spots.

The protocol version number is changed to reflect the different rcom
structures.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:35:50 -05:00
Ryusuke Konishi
57adf7eede [DLM] fix format warnings in rcom.c and recoverd.c
This fixes the following gcc warnings generated on
the architectures where uint64_t != unsigned long long (e.g. ppc64).

fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'uint64_t'
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'uint64_t'
fs/dlm/recoverd.c:48: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:202: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:210: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'

Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:22 -05:00
David Teigland
98f176fb32 [DLM] don't accept replies to old recovery messages
We often abort a recovery after sending a status request to a remote node.
We want to ignore any potential status reply we get from the remote node.
If we get one of these unwanted replies, we've often moved on to the next
recovery message and incremented the message sequence counter, so the
reply will be ignored due to the seq number.  In some cases, we've not
moved on to the next message so the seq number of the reply we want to
ignore is still correct, causing the reply to be accepted.  The next
recovery message will then mistake this old reply as a new one.

To fix this, we add the flag RCOM_WAIT to indicate when we can accept a
new reply.  We clear this flag if we abort recovery while waiting for a
reply.  Before the flag is set again (to allow new replies) we know that
any old replies will be rejected due to their sequence number.  We also
initialize the recovery-message sequence number to a random value when a
lockspace is first created.  This makes it clear when messages are being
rejected from an old instance of a lockspace that has since been
recreated.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:14 -05:00
David Teigland
1babdb4531 [DLM] fix size of STATUS_REPLY message
When the not_ready routine sends a "fake" status reply with blank status
flags, it needs to use the correct size for a normal STATUS_REPLY by
including the size of the would-be config parameters.  We also fill in the
non-existant config parameters with an invalid lvblen value so it's easier
to notice if these invalid paratmers are ever being used.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:08 -05:00
David Teigland
435618b75b [DLM] status messages ping-pong between unmounted nodes
Red Hat BZ 213682

If two nodes leave the lockspace (while unmounting the fs in the case of
gfs) after one has sent a STATUS message to the other, STATUS/STATUS_REPLY
messages will then ping-pong between the nodes when neither of them can
find the lockspace in question any longer.  We kill this by not sending
another STATUS message when we get a STATUS_REPLY for an unknown
lockspace.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:35:06 -05:00
David Teigland
f5888750aa [DLM] sequence number missing in not_ready reply
When a status reply is sent for a lockspace that doesn't yet exist, the
message sequence number from the sender was not being copied into the
reply causing the sender to ignore the reply.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-24 09:37:43 -04:00
David Teigland
4a99c3d9d6 [DLM] reject replies to old requests
When recoveries are aborted by other recoveries we can get replies to
status or names requests that we've given up on.  This can cause problems
if we're making another request and receive an old reply.  Add a sequence
number to status/names requests and reject replies that don't match.  A
field already exists for the seq number that's used in other message
types.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-09 17:32:07 -04:00
David Teigland
faa0f26772 [DLM] show nodeid for recovery message
To aid debugging, it's useful to be able to see what nodeid the dlm is
waiting on for a message reply.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-09 09:46:38 -04:00
David Teigland
3bcd3687f8 [DLM] Remove range locks from the DLM
This patch removes support for range locking from the DLM

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-23 09:56:38 +00:00
David Teigland
e7fd41792f [DLM] The core of the DLM for GFS2/CLVM
This is the core of the distributed lock manager which is required
to use GFS2 as a cluster filesystem. It is also used by CLVM and
can be used as a standalone lock manager independantly of either
of these two projects.

It implements VAX-style locking modes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-18 09:30:29 +00:00