Commit Graph

186 Commits

Author SHA1 Message Date
Kuniyuki Iwashima
9ab0faa7f9 sctp: Fix null-ptr-deref in reuseport_add_sock().
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]

The repro first creates a listener with SO_REUSEPORT.  Then, it creates
another listener on the same port and concurrently closes the first
listener.

The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().

The problem is SCTP does not properly synchronise reuseport_alloc(),
reuseport_add_sock(), and reuseport_detach_sock().

The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must
provide synchronisation for sockets that are classified into the same
reuseport group.

Otherwise, such sockets form multiple identical reuseport groups, and
all groups except one would be silently dead.

  1. Two sockets call listen() concurrently
  2. No socket in the same group found in sctp_ep_hashtable[]
  3. Two sockets call reuseport_alloc() and form two reuseport groups
  4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives
      incoming packets

Also, the reported null-ptr-deref could occur.

TCP/UDP guarantees that would not happen by holding the hash bucket lock.

Let's apply the locking strategy to __sctp_hash_endpoint() and
__sctp_unhash_endpoint().

[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350
Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14
RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012
RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385
R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __sctp_hash_endpoint net/sctp/input.c:762 [inline]
 sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790
 sctp_listen_start net/sctp/socket.c:8570 [inline]
 sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625
 __sys_listen_socket net/socket.c:1883 [inline]
 __sys_listen+0x1b7/0x230 net/socket.c:1894
 __do_sys_listen net/socket.c:1902 [inline]
 __se_sys_listen net/socket.c:1900 [inline]
 __x64_sys_listen+0x5a/0x70 net/socket.c:1900
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f24e46039b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9
RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004
RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0
R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c
R13: 00007f24e465a5dc R14: 0020000000000001 R15: 00007ffcced5f7d8
 </TASK>
Modules linked in:

Fixes: 6ba8457402 ("sctp: process sk_reuseport in sctp_get_port_local")
Reported-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e6979a5d2f10ecb700e4
Tested-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240731234624.94055-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-02 16:25:06 -07:00
Eric Dumazet
6b5f43ea08 inet: move inet->recverr to inet->inet_flags
IP_RECVERR socket option can now be set/get without locking the socket.

This patch potentially avoid data-races around inet->recverr.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Xin Long
add7370a39 sctp: delete the nested flexible array params
This patch deletes the flexible-array params[] from the structure
sctp_inithdr, sctp_addiphdr and sctp_reconf_chunk to avoid some
sparse warnings:

  # make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
  net/sctp/input.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
  ./include/linux/sctp.h:278:29: warning: nested flexible array
  ./include/linux/sctp.h:675:30: warning: nested flexible array

This warning is reported if a structure having a flexible array
member is included by other structures.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21 08:19:29 +01:00
Eric Dumazet
2f2d9972af net: annotate lockless accesses to sk->sk_err_soft
This field can be read/written without lock synchronization.

tcp and dccp have been handled in different patches.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-17 08:25:05 +00:00
Xin Long
0af0317063 sctp: add dif and sdif check in asoc and ep lookup
This patch at first adds a pernet global l3mdev_accept to decide if it
accepts the packets from a l3mdev when a SCTP socket doesn't bind to
any interface. It's set to 1 to avoid any possible incompatible issue,
and in next patch, a sysctl will be introduced to allow to change it.

Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is
added to check either dif or sdif is equal to sk_bound_dev_if, and to
check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set.
This function is used to match a association or a endpoint, namely
called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match().
All functions that needs updating are:

sctp_rcv():
  asoc:
  __sctp_rcv_lookup()
    __sctp_lookup_association() -> sctp_addrs_lookup_transport()
    __sctp_rcv_lookup_harder()
      __sctp_rcv_init_lookup()
         __sctp_lookup_association() -> sctp_addrs_lookup_transport()
      __sctp_rcv_walk_lookup()
         __sctp_rcv_asconf_lookup()
           __sctp_lookup_association() -> sctp_addrs_lookup_transport()

  ep:
  __sctp_rcv_lookup_endpoint() -> sctp_endpoint_is_match()

sctp_connect():
  sctp_endpoint_is_peeled_off()
    __sctp_lookup_association()
      sctp_has_association()
        sctp_lookup_association()
          __sctp_lookup_association() -> sctp_addrs_lookup_transport()

sctp_diag_dump_one():
  sctp_transport_lookup_process() -> sctp_addrs_lookup_transport()

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18 11:42:54 +00:00
Eric Dumazet
a20ea29807 sctp: read sk->sk_bound_dev_if once in sctp_rcv()
sctp_rcv() reads sk->sk_bound_dev_if twice while the socket
is not locked. Another cpu could change this field under us.

Fixes: 0fd9a65a76 ("[SCTP] Support SO_BINDTODEVICE socket option on incoming packets.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16 10:31:06 +01:00
Xin Long
3d3b2f57d4 sctp: move hlist_node and hashent out of sctp_ep_common
Struct sctp_ep_common is included in both asoc and ep, but hlist_node
and hashent are only needed by ep after asoc_hashtable was dropped by
Commit b5eff71283 ("sctp: drop the old assoc hashtable of sctp").

So it is better to move hlist_node and hashent from sctp_ep_common to
sctp_endpoint, and it saves some space for each asoc.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-23 11:15:30 +00:00
Xin Long
f7e745f8e9 sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
We should always check if skb_header_pointer's return is NULL before
using it, otherwise it may cause null-ptr-deref, as syzbot reported:

  KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
  RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline]
  RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196
  Call Trace:
  <IRQ>
   sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109
   ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422
   ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463
   NF_HOOK include/linux/netfilter.h:307 [inline]
   NF_HOOK include/linux/netfilter.h:301 [inline]
   ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472
   dst_input include/net/dst.h:460 [inline]
   ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
   NF_HOOK include/linux/netfilter.h:307 [inline]
   NF_HOOK include/linux/netfilter.h:301 [inline]
   ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297

Fixes: 3acb50c18d ("sctp: delay as much as possible skb_linearize")
Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24 10:36:19 +01:00
Marcelo Ricardo Leitner
557fb5862c sctp: fix return value check in __sctp_rcv_asconf_lookup
As Ben Hutchings noticed, this check should have been inverted: the call
returns true in case of success.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 0c5dc070ff ("sctp: validate from_addr_param return")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 09:25:18 +01:00
Linus Torvalds
dbe69e4337 Networking changes for 5.14.
Core:
 
  - BPF:
    - add syscall program type and libbpf support for generating
      instructions and bindings for in-kernel BPF loaders (BPF loaders
      for BPF), this is a stepping stone for signed BPF programs
    - infrastructure to migrate TCP child sockets from one listener
      to another in the same reuseport group/map to improve flexibility
      of service hand-off/restart
    - add broadcast support to XDP redirect
 
  - allow bypass of the lockless qdisc to improving performance
    (for pktgen: +23% with one thread, +44% with 2 threads)
 
  - add a simpler version of "DO_ONCE()" which does not require
    jump labels, intended for slow-path usage
 
  - virtio/vsock: introduce SOCK_SEQPACKET support
 
  - add getsocketopt to retrieve netns cookie
 
  - ip: treat lowest address of a IPv4 subnet as ordinary unicast address
        allowing reclaiming of precious IPv4 addresses
 
  - ipv6: use prandom_u32() for ID generation
 
  - ip: add support for more flexible field selection for hashing
        across multi-path routes (w/ offload to mlxsw)
 
  - icmp: add support for extended RFC 8335 PROBE (ping)
 
  - seg6: add support for SRv6 End.DT46 behavior
 
  - mptcp:
     - DSS checksum support (RFC 8684) to detect middlebox meddling
     - support Connection-time 'C' flag
     - time stamping support
 
  - sctp: packetization Layer Path MTU Discovery (RFC 8899)
 
  - xfrm: speed up state addition with seq set
 
  - WiFi:
     - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
     - aggregation handling improvements for some drivers
     - minstrel improvements for no-ack frames
     - deferred rate control for TXQs to improve reaction times
     - switch from round robin to virtual time-based airtime scheduler
 
  - add trace points:
     - tcp checksum errors
     - openvswitch - action execution, upcalls
     - socket errors via sk_error_report
 
 Device APIs:
 
  - devlink: add rate API for hierarchical control of max egress rate
             of virtual devices (VFs, SFs etc.)
 
  - don't require RCU read lock to be held around BPF hooks
    in NAPI context
 
  - page_pool: generic buffer recycling
 
 New hardware/drivers:
 
  - mobile:
     - iosm: PCIe Driver for Intel M.2 Modem
     - support for Qualcomm MSM8998 (ipa)
 
  - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
 
  - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
 
  - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
 
  - NXP SJA1110 Automotive Ethernet 10-port switch
 
  - Qualcomm QCA8327 switch support (qca8k)
 
  - Mikrotik 10/25G NIC (atl1c)
 
 Driver changes:
 
  - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
    (our first foray into MAC/PHY description via ACPI)
 
  - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
 
  - Mellanox/Nvidia NIC (mlx5)
    - NIC VF offload of L2 bridging
    - support IRQ distribution to Sub-functions
 
  - Marvell (prestera):
     - add flower and match all
     - devlink trap
     - link aggregation
 
  - Netronome (nfp): connection tracking offload
 
  - Intel 1GE (igc): add AF_XDP support
 
  - Marvell DPU (octeontx2): ingress ratelimit offload
 
  - Google vNIC (gve): new ring/descriptor format support
 
  - Qualcomm mobile (rmnet & ipa): inline checksum offload support
 
  - MediaTek WiFi (mt76)
     - mt7915 MSI support
     - mt7915 Tx status reporting
     - mt7915 thermal sensors support
     - mt7921 decapsulation offload
     - mt7921 enable runtime pm and deep sleep
 
  - Realtek WiFi (rtw88)
     - beacon filter support
     - Tx antenna path diversity support
     - firmware crash information via devcoredump
 
  - Qualcomm 60GHz WiFi (wcn36xx)
     - Wake-on-WLAN support with magic packets and GTK rekeying
 
  - Micrel PHY (ksz886x/ksz8081): add cable test support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmDb+fUACgkQMUZtbf5S
 Irs2Jg//aqN0Q8CgIvYCVhPxQw1tY7pTAbgyqgBZ01vwjyvtIOgJiWzSfFEU84mX
 M8fcpFX5eTKrOyJ9S6UFfQ/JG114n3hjAxFFT4Hxk2gC1Tg0vHuFQTDHcUl28bUE
 mTm61e1YpdorILnv2k5JVQ/wu0vs5QKDrjcYcrcPnh+j93wvnPOgAfDBV95nZzjS
 OTt4q2fR8GzLcSYWWsclMbDNkzyTG50RW/0Yd6aGjr5QGvXfrMeXfUJNz533PMf/
 w5lNyjRKv+x9mdTZJzU0+msNUrZgUdRz7W8Ey8lD3hJZRE+D6/uU7FtsE8Mi3+uc
 HWxeZUyzA3YF1MfVl/eesbxyPT7S/OkLzk4O5B35FbqP0YltaP+bOjq1/nM3ce1/
 io9Dx9pIl/2JANUgRCAtLi8Z2dkvRoqTaBxZ/nPudCCljFwDwl6joTMJ7Ow22i5Y
 5aIkcXFmZq4LbJDiHvbTlqT7yiuaEvu2UK/23bSIg/K3nF4eAmkY9Y1EgiMf60OF
 78Ttw0wk2tUegwaS5MZnCniKBKDyl9gM2F6rbZ/IxQRR2LTXFc1B6gC+ynUxgXfh
 Ub8O++6qGYGYZ0XvQH4pzco79p3qQWBTK5beIp2eu6BOAjBVIXq4AibUfoQLACsu
 hX7jMPYd0kc3WFgUnKgQP8EnjFSwbf4XiaE7fIXvWBY8hzCw2h4=
 =LvtX
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - BPF:
      - add syscall program type and libbpf support for generating
        instructions and bindings for in-kernel BPF loaders (BPF loaders
        for BPF), this is a stepping stone for signed BPF programs
      - infrastructure to migrate TCP child sockets from one listener to
        another in the same reuseport group/map to improve flexibility
        of service hand-off/restart
      - add broadcast support to XDP redirect

   - allow bypass of the lockless qdisc to improving performance (for
     pktgen: +23% with one thread, +44% with 2 threads)

   - add a simpler version of "DO_ONCE()" which does not require jump
     labels, intended for slow-path usage

   - virtio/vsock: introduce SOCK_SEQPACKET support

   - add getsocketopt to retrieve netns cookie

   - ip: treat lowest address of a IPv4 subnet as ordinary unicast
     address allowing reclaiming of precious IPv4 addresses

   - ipv6: use prandom_u32() for ID generation

   - ip: add support for more flexible field selection for hashing
     across multi-path routes (w/ offload to mlxsw)

   - icmp: add support for extended RFC 8335 PROBE (ping)

   - seg6: add support for SRv6 End.DT46 behavior

   - mptcp:
      - DSS checksum support (RFC 8684) to detect middlebox meddling
      - support Connection-time 'C' flag
      - time stamping support

   - sctp: packetization Layer Path MTU Discovery (RFC 8899)

   - xfrm: speed up state addition with seq set

   - WiFi:
      - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
      - aggregation handling improvements for some drivers
      - minstrel improvements for no-ack frames
      - deferred rate control for TXQs to improve reaction times
      - switch from round robin to virtual time-based airtime scheduler

   - add trace points:
      - tcp checksum errors
      - openvswitch - action execution, upcalls
      - socket errors via sk_error_report

  Device APIs:

   - devlink: add rate API for hierarchical control of max egress rate
     of virtual devices (VFs, SFs etc.)

   - don't require RCU read lock to be held around BPF hooks in NAPI
     context

   - page_pool: generic buffer recycling

  New hardware/drivers:

   - mobile:
      - iosm: PCIe Driver for Intel M.2 Modem
      - support for Qualcomm MSM8998 (ipa)

   - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

   - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

   - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

   - NXP SJA1110 Automotive Ethernet 10-port switch

   - Qualcomm QCA8327 switch support (qca8k)

   - Mikrotik 10/25G NIC (atl1c)

  Driver changes:

   - ACPI support for some MDIO, MAC and PHY devices from Marvell and
     NXP (our first foray into MAC/PHY description via ACPI)

   - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

   - Mellanox/Nvidia NIC (mlx5)
      - NIC VF offload of L2 bridging
      - support IRQ distribution to Sub-functions

   - Marvell (prestera):
      - add flower and match all
      - devlink trap
      - link aggregation

   - Netronome (nfp): connection tracking offload

   - Intel 1GE (igc): add AF_XDP support

   - Marvell DPU (octeontx2): ingress ratelimit offload

   - Google vNIC (gve): new ring/descriptor format support

   - Qualcomm mobile (rmnet & ipa): inline checksum offload support

   - MediaTek WiFi (mt76)
      - mt7915 MSI support
      - mt7915 Tx status reporting
      - mt7915 thermal sensors support
      - mt7921 decapsulation offload
      - mt7921 enable runtime pm and deep sleep

   - Realtek WiFi (rtw88)
      - beacon filter support
      - Tx antenna path diversity support
      - firmware crash information via devcoredump

   - Qualcomm WiFi (wcn36xx)
      - Wake-on-WLAN support with magic packets and GTK rekeying

   - Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
  tcp: change ICSK_CA_PRIV_SIZE definition
  tcp_yeah: check struct yeah size at compile time
  gve: DQO: Fix off by one in gve_rx_dqo()
  stmmac: intel: set PCI_D3hot in suspend
  stmmac: intel: Enable PHY WOL option in EHL
  net: stmmac: option to enable PHY WOL with PMT enabled
  net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
  net: use netdev_info in ndo_dflt_fdb_{add,del}
  ptp: Set lookup cookie when creating a PTP PPS source.
  net: sock: add trace for socket errors
  net: sock: introduce sk_error_report
  net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
  net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
  net: dsa: include fdb entries pointing to bridge in the host fdb list
  net: dsa: include bridge addresses which are local in the host fdb list
  net: dsa: sync static FDB entries on foreign interfaces to hardware
  net: dsa: install the host MDB and FDB entries in the master's RX filter
  net: dsa: reference count the FDB addresses at the cross-chip notifier level
  net: dsa: introduce a separate cross-chip notifier type for host FDBs
  net: dsa: reference count the MDB entries at the cross-chip notifier level
  ...
2021-06-30 15:51:09 -07:00
Jakub Kicinski
b6df00789e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in net/netfilter/nf_tables_api.c.

Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.

skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29 15:45:27 -07:00
Alexander Aring
e3ae2365ef net: sock: introduce sk_error_report
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 11:28:21 -07:00
Marcelo Ricardo Leitner
b6ffe7671b sctp: validate chunk size in __rcv_asconf_lookup
In one of the fallbacks that SCTP has for identifying an association for an
incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek.
Thing is, at this stage nothing was validating that the chunk actually had
enough content for that, allowing the peek to happen over uninitialized
memory.

Similar check already exists in actual asconf handling in
sctp_verify_asconf().

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28 15:34:50 -07:00
Marcelo Ricardo Leitner
50619dbf8d sctp: add size validation when walking chunks
The first chunk in a packet is ensured to be present at the beginning of
sctp_rcv(), as a packet needs to have at least 1 chunk. But the second
one, may not be completely available and ch->length can be over
uninitialized memory.

Fix here is by only trying to walk on the next chunk if there is enough to
hold at least the header, and then proceed with the ch->length validation
that is already there.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28 15:34:50 -07:00
Marcelo Ricardo Leitner
0c5dc070ff sctp: validate from_addr_param return
Ilja reported that, simply putting it, nothing was validating that
from_addr_param functions were operating on initialized memory. That is,
the parameter itself was being validated by sctp_walk_params, but it
doesn't check for types and their specific sizes and it could be a 0-length
one, causing from_addr_param to potentially work over the next parameter or
even uninitialized memory.

The fix here is to, in all calls to from_addr_param, check if enough space
is there for the wanted IP address type.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28 15:34:50 -07:00
Xin Long
9e47df005c sctp: process sctp over udp icmp err on sctp side
Previously, sctp over udp was using udp tunnel's icmp err process, which
only does sk lookup on sctp side. However for sctp's icmp error process,
there are more things to do, like syncing assoc pmtu/retransmit packets
for toobig type err, and starting proto_unreach_timer for unreach type
err etc.

Now after adding PLPMTUD, which also requires to process toobig type err
on sctp side. This patch is to process icmp err on sctp side by parsing
the type/code/info in .encap_err_lookup and call sctp's icmp processing
functions. Note as the 'redirect' err process needs to know the outer
ip(v6) header's, we have to leave it to udp(v6)_err to handle it.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22 11:28:52 -07:00
Xin Long
d83060759a sctp: extract sctp_v4_err_handle function from sctp_v4_err
This patch is to extract sctp_v4_err_handle() from sctp_v4_err() to
only handle the icmp err after the sock lookup, and it also makes
the code clearer.

sctp_v4_err_handle() will be used in sctp over udp's err handling
in the following patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22 11:28:52 -07:00
Xin Long
8369640831 sctp: do state transition when receiving an icmp TOOBIG packet
PLPMTUD will short-circuit the old process for icmp TOOBIG packets.
This part is described in rfc8899#section-4.6.2 (PL_PTB_SIZE =
PTB_SIZE - other_headers_len). Note that from rfc8899#section-5.2
State Machine, each case below is for some specific states only:

  a) PL_PTB_SIZE < MIN_PLPMTU || PL_PTB_SIZE >= PROBED_SIZE,
     discard it, for any state

  b) MIN_PLPMTU < PL_PTB_SIZE < BASE_PLPMTU,
     Base -> Error, for Base state

  c) BASE_PLPMTU <= PL_PTB_SIZE < PLPMTU,
     Search -> Base or Complete -> Base, for Search and Complete states.

  d) PLPMTU < PL_PTB_SIZE < PROBED_SIZE,
     set pl.probe_size to PL_PTB_SIZE then verify it, for Search state.

The most important one is case d), which will help find the optimal
fast during searching. Like when pathmtu = 1392 for SCTP over IPv4,
the search will be (20 is iphdr_len):

  1. probe with 1200 - 20
  2. probe with 1232 - 20
  3. probe with 1264 - 20
  ...
  7. probe with 1388 - 20
  8. probe with 1420 - 20

When sending the probe with 1420 - 20, TOOBIG may come with PL_PTB_SIZE =
1392 - 20. Then it matches case d), and saves some rounds to try with the
1392 - 20 probe. But of course, PLPMTUD doesn't trust TOOBIG packets, and
it will go back to the common searching once the probe with the new size
can't be verified.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22 11:28:52 -07:00
Gustavo A. R. Silva
0572b37b27 sctp: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding a break statement and replacing a
comment with a goto statement instead of letting the code fall through
to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-05-17 20:06:33 -05:00
Xin Long
057a10fa1f sctp: change to hold/put transport for proto_unreach_timer
A call trace was found in Hangbin's Codenomicon testing with debug kernel:

  [ 2615.981988] ODEBUG: free active (active state 0) object type: timer_list hint: sctp_generate_proto_unreach_event+0x0/0x3a0 [sctp]
  [ 2615.995050] WARNING: CPU: 17 PID: 0 at lib/debugobjects.c:328 debug_print_object+0x199/0x2b0
  [ 2616.095934] RIP: 0010:debug_print_object+0x199/0x2b0
  [ 2616.191533] Call Trace:
  [ 2616.194265]  <IRQ>
  [ 2616.202068]  debug_check_no_obj_freed+0x25e/0x3f0
  [ 2616.207336]  slab_free_freelist_hook+0xeb/0x140
  [ 2616.220971]  kfree+0xd6/0x2c0
  [ 2616.224293]  rcu_do_batch+0x3bd/0xc70
  [ 2616.243096]  rcu_core+0x8b9/0xd00
  [ 2616.256065]  __do_softirq+0x23d/0xacd
  [ 2616.260166]  irq_exit+0x236/0x2a0
  [ 2616.263879]  smp_apic_timer_interrupt+0x18d/0x620
  [ 2616.269138]  apic_timer_interrupt+0xf/0x20
  [ 2616.273711]  </IRQ>

This is because it holds asoc when transport->proto_unreach_timer starts
and puts asoc when the timer stops, and without holding transport the
transport could be freed when the timer is still running.

So fix it by holding/putting transport instead for proto_unreach_timer
in transport, just like other timers in transport.

v1->v2:
  - Also use sctp_transport_put() for the "out_unlock:" path in
    sctp_generate_proto_unreach_event(), as Marcelo noticed.

Fixes: 50b5d6ad63 ("sctp: Fix a race between ICMP protocol unreachable and connect()")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/102788809b554958b13b95d33440f5448113b8d6.1605331373.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14 11:57:12 -08:00
Jules Irenge
887cf3d139 sctp: Add missing annotation for sctp_err_finish()
Sparse reports a warning at sctp_err_finish()
warning: context imbalance in sctp_err_finish() - unexpected unlock

The root cause is a missing annotation at sctp_err_finish()
Add the missing  __releases(&((__sk)->sk_lock.slock)) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24 13:26:48 -08:00
Xin Long
4e7696d90b sctp: get netns from asoc and ep base
Commit 312434617c ("sctp: cache netns in sctp_ep_common") set netns
in asoc and ep base since they're created, and it will never change.
It's a better way to get netns from asoc and ep base, comparing to
calling sock_net().

This patch is to replace them.

v1->v2:
  - no change.

Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09 20:14:01 -08:00
Xin Long
312434617c sctp: cache netns in sctp_ep_common
This patch is to fix a data-race reported by syzbot:

  BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj

  write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1:
    sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091
    sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465
    sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916
    inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734
    __sys_accept4+0x224/0x430 net/socket.c:1754
    __do_sys_accept net/socket.c:1795 [inline]
    __se_sys_accept net/socket.c:1792 [inline]
    __x64_sys_accept+0x4e/0x60 net/socket.c:1792
    do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0:
    sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894
    rht_key_get_hash include/linux/rhashtable.h:133 [inline]
    rht_key_hashfn include/linux/rhashtable.h:159 [inline]
    rht_head_hashfn include/linux/rhashtable.h:174 [inline]
    head_hashfn lib/rhashtable.c:41 [inline]
    rhashtable_rehash_one lib/rhashtable.c:245 [inline]
    rhashtable_rehash_chain lib/rhashtable.c:276 [inline]
    rhashtable_rehash_table lib/rhashtable.c:316 [inline]
    rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420
    process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
    worker_thread+0xa0/0x800 kernel/workqueue.c:2415
    kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate
is changing its value. However, what rhashtable wants is netns from asoc
base.sk, and for an asoc, its netns won't change once set. So we can
simply fix it by caching netns since created.

Fixes: d6c0256a60 ("sctp: add the rhashtable apis for sctp global transport hashtable")
Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23 18:26:14 -08:00
Eric Dumazet
8265792bf8 net: silence KCSAN warnings around sk_add_backlog() calls
sk_add_backlog() callers usually read sk->sk_rcvbuf without
owning the socket lock. This means sk_rcvbuf value can
be changed by other cpus, and KCSAN complains.

Add READ_ONCE() annotations to document the lockless nature
of these reads.

Note that writes over sk_rcvbuf should also use WRITE_ONCE(),
but this will be done in separate patches to ease stable
backports (if we decide this is relevant for stable trees).

BUG: KCSAN: data-race in tcp_add_backlog / tcp_recvmsg

write to 0xffff88812ab369f8 of 8 bytes by interrupt on cpu 1:
 __sk_add_backlog include/net/sock.h:902 [inline]
 sk_add_backlog include/net/sock.h:933 [inline]
 tcp_add_backlog+0x45a/0xcc0 net/ipv4/tcp_ipv4.c:1737
 tcp_v4_rcv+0x1aba/0x1bf0 net/ipv4/tcp_ipv4.c:1925
 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118
 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208
 napi_skb_finish net/core/dev.c:5671 [inline]
 napi_gro_receive+0x28f/0x330 net/core/dev.c:5704
 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061
 virtnet_receive drivers/net/virtio_net.c:1323 [inline]
 virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428
 napi_poll net/core/dev.c:6352 [inline]
 net_rx_action+0x3ae/0xa50 net/core/dev.c:6418

read to 0xffff88812ab369f8 of 8 bytes by task 7271 on cpu 0:
 tcp_recvmsg+0x470/0x1a30 net/ipv4/tcp.c:2047
 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
 sock_recvmsg_nosec net/socket.c:871 [inline]
 sock_recvmsg net/socket.c:889 [inline]
 sock_recvmsg+0x92/0xb0 net/socket.c:885
 sock_read_iter+0x15f/0x1e0 net/socket.c:967
 call_read_iter include/linux/fs.h:1864 [inline]
 new_sync_read+0x389/0x4f0 fs/read_write.c:414
 __vfs_read+0xb1/0xc0 fs/read_write.c:427
 vfs_read fs/read_write.c:461 [inline]
 vfs_read+0x143/0x2c0 fs/read_write.c:446
 ksys_read+0xd5/0x1b0 fs/read_write.c:587
 __do_sys_read fs/read_write.c:597 [inline]
 __se_sys_read fs/read_write.c:595 [inline]
 __x64_sys_read+0x4c/0x60 fs/read_write.c:595
 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7271 Comm: syz-fuzzer Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09 21:42:59 -07:00
Xin Long
819be8108f sctp: add chunks to sk_backlog when the newsk sk_socket is not set
This patch is to fix a NULL-ptr deref in selinux_socket_connect_helper:

  [...] kasan: GPF could be caused by NULL-ptr deref or user memory access
  [...] RIP: 0010:selinux_socket_connect_helper+0x94/0x460
  [...] Call Trace:
  [...]  selinux_sctp_bind_connect+0x16a/0x1d0
  [...]  security_sctp_bind_connect+0x58/0x90
  [...]  sctp_process_asconf+0xa52/0xfd0 [sctp]
  [...]  sctp_sf_do_asconf+0x785/0x980 [sctp]
  [...]  sctp_do_sm+0x175/0x5a0 [sctp]
  [...]  sctp_assoc_bh_rcv+0x285/0x5b0 [sctp]
  [...]  sctp_backlog_rcv+0x482/0x910 [sctp]
  [...]  __release_sock+0x11e/0x310
  [...]  release_sock+0x4f/0x180
  [...]  sctp_accept+0x3f9/0x5a0 [sctp]
  [...]  inet_accept+0xe7/0x720

It was caused by that the 'newsk' sk_socket was not set before going to
security sctp hook when processing asconf chunk with SCTP_PARAM_ADD_IP
or SCTP_PARAM_SET_PRIMARY:

  inet_accept()->
    sctp_accept():
      lock_sock():
          lock listening 'sk'
                                          do_softirq():
                                            sctp_rcv():  <-- [1]
                                                asconf chunk arrives and
                                                enqueued in 'sk' backlog
      sctp_sock_migrate():
          set asoc's sk to 'newsk'
      release_sock():
          sctp_backlog_rcv():
            lock 'newsk'
            sctp_process_asconf()  <-- [2]
            unlock 'newsk'
    sock_graft():
        set sk_socket  <-- [3]

As it shows, at [1] the asconf chunk would be put into the listening 'sk'
backlog, as accept() was holding its sock lock. Then at [2] asconf would
get processed with 'newsk' as asoc's sk had been set to 'newsk'. However,
'newsk' sk_socket is not set until [3], while selinux_sctp_bind_connect()
would deref it, then kernel crashed.

Here to fix it by adding the chunk to sk_backlog until newsk sk_socket is
set when .accept() is done.

Note that sk->sk_socket can be NULL when the sock is closed, so SOCK_DEAD
flag is also needed to check in sctp_newsk_ready().

Thanks to Ondrej for reviewing the code.

Fixes: d452930fd3 ("selinux: Add SCTP support")
Reported-by: Ying Xu <yinxu@redhat.com>
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09 16:27:04 -07:00
Florian Westphal
895b5c9f20 netfilter: drop bridge nf reset from nf_reset
commit 174e23810c
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions.  The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.

Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.

This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().

In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.

I am submitting this for "net", because we're still early in the release
cycle.  The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-10-01 18:42:15 +02:00
Thomas Gleixner
47505b8bcf treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
Based on 1 normalized pattern(s):

  this sctp implementation is free software you can redistribute it
  and or modify it under the terms of the gnu general public license
  as published by the free software foundation either version 2 or at
  your option any later version this sctp implementation is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with gnu cc see the file copying if not see
  http www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 42 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.683323110@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:39:00 +02:00
Xin Long
76c6d988ae sctp: add sock_reuseport for the sock in __sctp_hash_endpoint
This is a part of sk_reuseport support for sctp. It defines a helper
sctp_bind_addrs_check() to check if the bind_addrs in two socks are
matched. It will add sock_reuseport if they are completely matched,
and return err if they are partly matched, and alloc sock_reuseport
if all socks are not matched at all.

It will work until sk_reuseport support is added in
sctp_get_port_local() in the next patch.

v1->v2:
  - use 'laddr->valid && laddr2->valid' check instead as Marcelo
    pointed in sctp_bind_addrs_check().

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-12 09:09:51 -08:00
Xin Long
532ae2f10e sctp: do reuseport_select_sock in __sctp_rcv_lookup_endpoint
This is a part of sk_reuseport support for sctp, and it selects a
sock by the hashkey of lport, paddr and dport by default. It will
work until sk_reuseport support is added in sctp_get_port_local()
in the next patch.

v1->v2:
  - define lport as __be16 instead of __be32 as Marcelo pointed in
    __sctp_rcv_lookup_endpoint().

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-12 09:09:51 -08:00
Stefano Brivio
32bbd8793f net: Convert protocol error handlers from void to int
We'll need this to handle ICMP errors for tunnels without a sending socket
(i.e. FoU and GUE). There, we might have to look up different types of IP
tunnels, registered as network protocols, before we get a match, so we
want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both
inet_protos and inet6_protos. These error codes will be used in the next
patch.

For consistency, return sensible error codes in protocol error handlers
whenever handlers can't handle errors because, even if valid, they don't
match a protocol or any of its states.

This has no effect on existing error handling paths.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 17:13:08 -08:00
Xin Long
d805397c38 sctp: use the pmtu from the icmp packet to update transport pathmtu
Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu
is also processing transport pmtu_pending by icmp packets. But it's
meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport.

The right pmtu value should come from the icmp packet, and it would
be saved into transport->mtu_info in this patch and used later when
the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config.

Besides, without this patch, as pmtu can only be updated correctly
when receiving a icmp packet and no place is holding sock lock, it
will take long time if the sock is busy with sending packets.

Note that it doesn't process transport->mtu_info in .release_cb(),
as there is no enough information for pmtu update, like for which
asoc or transport. It is not worth traversing all asocs to check
pmtu_pending. So unlike tcp, sctp does this in tx path, for which
mtu_info needs to be atomic_t.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:54:20 -07:00
NeilBrown
0eb71a9da5 rhashtable: split rhashtable.h
Due to the use of rhashtables in net namespaces,
rhashtable.h is included in lots of the kernel,
so a small changes can required a large recompilation.
This makes development painful.

This patch splits out rhashtable-types.h which just includes
the major type declarations, and does not include (non-trivial)
inline code.  rhashtable.h is no longer included by anything
in the include/ directory.
Common include files only include rhashtable-types.h so a large
recompilation is only triggered when that changes.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22 13:43:27 +09:00
Xin Long
5306653850 sctp: remove unnecessary asoc in sctp_has_association
After Commit dae399d7fd ("sctp: hold transport instead of assoc
when lookup assoc in rx path"), it put transport instead of asoc
in sctp_has_association. Variable 'asoc' is not used any more.

So this patch is to remove it, while at it,  it also changes the
return type of sctp_has_association to bool, and does the same
for it's caller sctp_endpoint_is_peeled_off.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 10:22:11 -04:00
Daniel Axtens
1dd27cde30 net: use skb_is_gso_sctp() instead of open-coding
As well as the basic conversion, I noticed that a lot of the
SCTP code checks gso_type without first checking skb_is_gso()
so I have added that where appropriate.

Also, document the helper.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09 11:41:47 -05:00
Xin Long
27af86bb03 sctp: do not pr_err for the duplicated node in transport rhlist
The pr_err in sctp_hash_transport was supposed to report a sctp bug
for using rhashtable/rhlist.

The err '-EEXIST' introduced in Commit cd2b708750 ("sctp: check
duplicate node before inserting a new transport") doesn't belong
to that case.

So just return -EEXIST back without pr_err any kmsg.

Fixes: cd2b708750 ("sctp: check duplicate node before inserting a new transport")
Reported-by: Wei Chen <weichen@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12 11:39:32 -05:00
Marcelo Ricardo Leitner
b6c5734db0 sctp: fix the handling of ICMP Frag Needed for too small MTUs
syzbot reported a hang involving SCTP, on which it kept flooding dmesg
with the message:
[  246.742374] sctp: sctp_transport_update_pmtu: Reported pmtu 508 too
low, using default minimum of 512

That happened because whenever SCTP hits an ICMP Frag Needed, it tries
to adjust to the new MTU and triggers an immediate retransmission. But
it didn't consider the fact that MTUs smaller than the SCTP minimum MTU
allowed (512) would not cause the PMTU to change, and issued the
retransmission anyway (thus leading to another ICMP Frag Needed, and so
on).

As IPv4 (ip_rt_min_pmtu=556) and IPv6 (IPV6_MIN_MTU=1280) minimum MTU
are higher than that, sctp_transport_update_pmtu() is changed to
re-fetch the PMTU that got set after our request, and with that, detect
if there was an actual change or not.

The fix, thus, skips the immediate retransmission if the received ICMP
resulted in no change, in the hope that SCTP will select another path.

Note: The value being used for the minimum MTU (512,
SCTP_DEFAULT_MINSEGMENT) is not right and instead it should be (576,
SCTP_MIN_PMTU), but such change belongs to another patch.

Changes from v1:
- do not disable PMTU discovery, in the light of commit
06ad391919 ("[SCTP] Don't disable PMTU discovery when mtu is small")
and as suggested by Xin Long.
- changed the way to break the rtx loop by detecting if the icmp
  resulted in a change or not
Changes from v2:
none

See-also: https://lkml.org/lkml/2017/12/22/811
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:19:13 -05:00
Marcelo Ricardo Leitner
cc35c3d1ed sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled
Currently, if PMTU discovery is disabled on a given transport, but the
configured value is higher than the actual PMTU, it is likely that we
will get some icmp Frag Needed. The issue is, if PMTU discovery is
disabled, we won't update the information and will issue a
retransmission immediately, which may very well trigger another ICMP,
and another retransmission, leading to a loop.

The fix is to simply not trigger immediate retransmissions if PMTU
discovery is disabled on the given transport.

Changes from v2:
- updated stale comment, noticed by Xin Long

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:19:13 -05:00
Xin Long
8d32503efd sctp: fix some type cast warnings introduced by transport rhashtable
These warnings were found by running 'make C=2 M=net/sctp/'.

They are introduced by not aware of Endian for the port when
coding transport rhashtable patches.

Fixes: 7fda702f93 ("sctp: use new rhlist interface on sctp transport rhashtable")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 18:03:24 +09:00
Xin Long
1cc276cec9 sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
Now sctp processes icmp redirect packet in sctp_icmp_redirect where
it calls sctp_transport_dst_check in which tp->dst can be released.

The problem is before calling sctp_transport_dst_check, it doesn't
check sock_owned_by_user, which means tp->dst could be freed while
a process is accessing it with owning the socket.

An use-after-free issue could be triggered by this.

This patch is to fix it by checking sock_owned_by_user before calling
sctp_transport_dst_check in sctp_icmp_redirect, so that it would not
release tp->dst if users still hold sock lock.

Besides, the same issue fixed in commit 45caeaa5ac ("dccp/tcp: fix
routing redirect race") on sctp also needs this check.

Fixes: 55be7a9c60 ("ipv4: Add redirect support to all protocol icmp error handlers")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 12:53:45 +01:00
Xin Long
68d7546946 sctp: remove the typedef sctp_addip_chunk_t
This patch is to remove the typedef sctp_addip_chunk_t, and
replace with struct sctp_addip_chunk in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03 09:45:47 -07:00
Xin Long
01a992bea5 sctp: remove the typedef sctp_init_chunk_t
This patch is to remove the typedef sctp_init_chunk_t, and replace
with struct sctp_init_chunk in the places where it's using this
typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 09:08:42 -07:00
Xin Long
922dbc5be2 sctp: remove the typedef sctp_chunkhdr_t
This patch is to remove the typedef sctp_chunkhdr_t, and replace
with struct sctp_chunkhdr in the places where it's using this
typedef.

It is also to fix some indents and use sizeof(variable) instead
of sizeof(type)., especially in sctp_new.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 09:08:41 -07:00
Davide Caratti
804ec7ebe8 sctp: fix ICMP processing if skb is non-linear
sometimes ICMP replies to INIT chunks are ignored by the client, even if
the encapsulated SCTP headers match an open socket. This happens when the
ICMP packet is carried by a paged skb: use skb_header_pointer() to read
packet contents beyond the SCTP header, so that chunk header and initiate
tag are validated correctly.

v2:
- don't use skb_header_pointer() to read the transport header, since
  icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26 14:40:46 -04:00
Xin Long
3ebfdf0821 sctp: get sock from transport in sctp_transport_update_pmtu
This patch is almost to revert commit 02f3d4ce9e ("sctp: Adjust PMTU
updates to accomodate route invalidation."). As t->asoc can't be NULL
in sctp_transport_update_pmtu, it could get sk from asoc, and no need
to pass sk into that function.

It is also to remove some duplicated codes from that function.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 07:20:06 -07:00
Xin Long
5179b26694 sctp: call rcu_read_lock before checking for duplicate transport nodes
Commit cd2b708750 ("sctp: check duplicate node before inserting a
new transport") called rhltable_lookup() to check for the duplicate
transport node in transport rhashtable.

But rhltable_lookup() doesn't call rcu_read_lock inside, it could cause
a use-after-free issue if it tries to dereference the node that another
cpu has freed it. Note that sock lock can not avoid this as it is per
sock.

This patch is to fix it by calling rcu_read_lock before checking for
duplicate transport nodes.

Fixes: cd2b708750 ("sctp: check duplicate node before inserting a new transport")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-01 09:50:58 -08:00
Xin Long
cd2b708750 sctp: check duplicate node before inserting a new transport
sctp has changed to use rhlist for transport rhashtable since commit
7fda702f93 ("sctp: use new rhlist interface on sctp transport
rhashtable").

But rhltable_insert_key doesn't check the duplicate node when inserting
a node, unlike rhashtable_lookup_insert_key. It may cause duplicate
assoc/transport in rhashtable. like:

 client (addr A, B)                 server (addr X, Y)
    connect to X           INIT (1)
                        ------------>
    connect to Y           INIT (2)
                        ------------>
                         INIT_ACK (1)
                        <------------
                         INIT_ACK (2)
                        <------------

After sending INIT (2), one transport will be created and hashed into
rhashtable. But when receiving INIT_ACK (1) and processing the address
params, another transport will be created and hashed into rhashtable
with the same addr Y and EP as the last transport. This will confuse
the assoc/transport's lookup.

This patch is to fix it by returning err if any duplicate node exists
before inserting it.

Fixes: 7fda702f93 ("sctp: use new rhlist interface on sctp transport rhashtable")
Reported-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-19 18:19:37 -05:00
Marcelo Ricardo Leitner
b77b7565a6 sctp: add pr_debug for tracking asocs not found
This pr_debug may help identify why the system is generating some
Aborts. It's not something a sysadmin would be expected to use.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28 14:26:17 -05:00
Xin Long
7fda702f93 sctp: use new rhlist interface on sctp transport rhashtable
Now sctp transport rhashtable uses hash(lport, dport, daddr) as the key
to hash a node to one chain. If in one host thousands of assocs connect
to one server with the same lport and different laddrs (although it's
not a normal case), all the transports would be hashed into the same
chain.

It may cause to keep returning -EBUSY when inserting a new node, as the
chain is too long and sctp inserts a transport node in a loop, which
could even lead to system hangs there.

The new rhlist interface works for this case that there are many nodes
with the same key in one chain. It puts them into a list then makes this
list be as a node of the chain.

This patch is to replace rhashtable_ interface with rhltable_ interface.
Since a chain would not be too long and it would not return -EBUSY with
this fix when inserting a node, the reinsert loop is also removed here.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16 23:22:17 -05:00
Xin Long
dae399d7fd sctp: hold transport instead of assoc when lookup assoc in rx path
Prior to this patch, in rx path, before calling lock_sock, it needed to
hold assoc when got it by __sctp_lookup_association, in case other place
would free/put assoc.

But in __sctp_lookup_association, it lookup and hold transport, then got
assoc by transport->assoc, then hold assoc and put transport. It means
it didn't hold transport, yet it was returned and later on directly
assigned to chunk->transport.

Without the protection of sock lock, the transport may be freed/put by
other places, which would cause a use-after-free issue.

This patch is to fix this issue by holding transport instead of assoc.
As holding transport can make sure to access assoc is also safe, and
actually it looks up assoc by searching transport rhashtable, to hold
transport here makes more sense.

Note that the function will be renamed later on on another patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31 16:20:33 -04:00
Xin Long
7c17fcc726 sctp: return back transport in __sctp_rcv_init_lookup
Prior to this patch, it used a local variable to save the transport that is
looked up by __sctp_lookup_association(), and didn't return it back. But in
sctp_rcv, it is used to initialize chunk->transport. So when hitting this,
even if it found the transport, it was still initializing chunk->transport
with null instead.

This patch is to return the transport back through transport pointer
that is from __sctp_rcv_lookup_harder().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31 16:20:32 -04:00