thread_group_cputime() looks as if it is rcu-safe, but in fact this
was wrong until ea6d290c which pins task->signal to task_struct.
It checks ->sighand != NULL under rcu, but this can't help if ->signal
can go away. Fortunately the caller either holds ->siglock, or it is
fastpath_timer_check() which uses current and checks exit_state == 0.
- Since ea6d290c commit tsk->signal is stable, we can read it first
and avoid the initialization from INIT_CPUTIME.
- Even if tsk->signal is always valid, we still have to check it
is safe to use next_thread() under rcu_read_lock(). Currently
the code checks ->sighand != NULL, change it to use pid_alive()
which is commonly used to ensure the task wasn't unhashed before
we take rcu_read_lock().
Add the comment to explain this check.
- Change the main loop to use the while_each_thread() helper.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230956.GA25921@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
account_group_xxx() functions check ->exit_state to ensure that
current->signal is valid and can't go away. This is not needed
since ea6d290c, task->signal is pinned to task_struct.
The comment and another hack in account_group_exec_runtime() refers
to task_rq_unlock_wait() which was already removed by b7b8ff63.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230952.GA25914@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__sched_setscheduler() takes lock_task_sighand() to access task->signal.
This is not needed since ea6d290c, ->signal can't go away.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230944.GA25903@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Docbook fails in sched_fair.c due to comments added in the asymmetric
packing patch series.
This fixes these errors. No code changes.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <24737.1276135581@neuling.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The CPU power test is the wrong way around in fix_small_capacity.
This was due to a small changes made in the posted patch on lkml to what
was was taken upstream.
This patch fixes asymmetric packing for POWER7.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <12629.1276124617@neuling.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix null pointer deref with SEND_SIG_FORCED
perf: Fix signed comparison in perf_adjust_period()
powerpc/oprofile: fix potential buffer overrun in op_model_cell.c
perf symbols: Set the DSO long name when using symbol_conf.vmlinux_name
Check to see if the group is packed in a sched doman.
This is primarily intended to used at the sibling level. Some cores
like POWER7 prefer to use lower numbered SMT threads. In the case of
POWER7, it can move to lower SMT modes only when higher threads are
idle. When in lower SMT modes, the threads will perform better since
they share less core resources. Hence when we have idle threads, we
want them to be the higher ones.
This adds a hook into f_b_g() called check_asym_packing() to check the
packing. This packing function is run on idle threads. It checks to
see if the busiest CPU in this domain (core in the P7 case) has a
higher CPU number than what where the packing function is being run
on. If it is, calculate the imbalance and return the higher busier
thread as the busiest group to f_b_g(). Here we are assuming a lower
CPU number will be equivalent to a lower SMT thread number.
It also creates a new SD_ASYM_PACKING flag to enable this feature at
any scheduler domain level.
It also creates an arch hook to enable this feature at the sibling
level. The default function doesn't enable this feature.
Based heavily on patch from Peter Zijlstra.
Fixes from Srivatsa Vaddagiri.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20100608045702.2936CCC897@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle cpu capacity being reported as 0 on cores with more number of
hardware threads. For example on a Power7 core with 4 hardware
threads, core power is 1177 and thus power of each hardware thread is
1177/4 = 294. This low power can lead to capacity for each hardware
thread being calculated as 0, which leads to tasks bouncing within the
core madly!
Fix this by reporting capacity for hardware threads as 1, provided
their power is not scaled down significantly because of frequency
scaling or real-time tasks usage of cpu.
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <20100608045702.21D03CC895@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the new push model, all idle CPUs indeed go into nohz mode. There is
still the concept of idle load balancer (performing the load balancing
on behalf of all the idle cpu's in the system). Busy CPU kicks the nohz
balancer when any of the nohz CPUs need idle load balancing.
The kickee CPU does the idle load balancing on behalf of all idle CPUs
instead of the normal idle balance.
This addresses the below two problems with the current nohz ilb logic:
* the idle load balancer continued to have periodic ticks during idle and
wokeup frequently, even though it did not have any rebalancing to do on
behalf of any of the idle CPUs.
* On x86 and CPUs that have APIC timer stoppage on idle CPUs, this
periodic wakeup can result in a periodic additional interrupt on a CPU
doing the timer broadcast.
Also currently we are migrating the unpinned timers from an idle to the cpu
doing idle load balancing (when all the cpus in the system are idle,
there is no idle load balancing cpu and timers get added to the same idle cpu
where the request was made. So the existing optimization works only on semi idle
system).
And In semi idle system, we no longer have periodic ticks on the idle load
balancer CPU. Using that cpu will add more delays to the timers than intended
(as that cpu's timer base may not be uptodate wrt jiffies etc). This was
causing mysterious slowdowns during boot etc.
For now, in the semi idle case, use the nearest busy cpu for migrating timers
from an idle cpu. This is good for power-savings anyway.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1274486981.2840.46.camel@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
tickless idle has a negative side effect on update_cpu_load(), which
in turn can affect load balancing behavior.
update_cpu_load() is supposed to be called every tick, to keep track
of various load indicies. With tickless idle, there are no scheduler
ticks called on the idle CPUs. Idle CPUs may still do load balancing
(with idle_load_balance CPU) using the stale cpu_load. It will also
cause problems when all CPUs go idle for a while and become active
again. In this case loads would not degrade as expected.
This is how rq->nr_load_updates change looks like under different
conditions:
<cpu_num> <nr_load_updates change>
All CPUS idle for 10 seconds (HZ=1000)
0 1621
10 496
11 139
12 875
13 1672
14 12
15 21
1 1472
2 2426
3 1161
4 2108
5 1525
6 701
7 249
8 766
9 1967
One CPU busy rest idle for 10 seconds
0 10003
10 601
11 95
12 966
13 1597
14 114
15 98
1 3457
2 93
3 6679
4 1425
5 1479
6 595
7 193
8 633
9 1687
All CPUs busy for 10 seconds
0 10026
10 10026
11 10026
12 10026
13 10025
14 10025
15 10025
1 10026
2 10026
3 10026
4 10026
5 10026
6 10026
7 10026
8 10026
9 10026
That is update_cpu_load works properly only when all CPUs are busy.
If all are idle, all the CPUs get way lower updates. And when few
CPUs are busy and rest are idle, only busy and ilb CPU does proper
updates and rest of the idle CPUs will do lower updates.
The patch keeps track of when a last update was done and fixes up
the load avg based on current time.
On one of my test system SPECjbb with warehouse 1..numcpus, patch
improves throughput numbers by ~1% (average of 6 runs). On another
test system (with different domain hierarchy) there is no noticable
change in perf.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <AANLkTilLtDWQsAUrIxJ6s04WTgmw9GuOODc5AOrYsaR5@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Contrary to what 6d558c3a says, there is no need to reload
prev = rq->curr after the context switch. You always schedule
back to where you came from, prev must be equal to current
even if cpu/rq was changed.
- This also means reacquire_kernel_lock() can use prev instead
of current.
- No need to reassign switch_count if reacquire_kernel_lock()
reports need_resched(), we can just move the initial assignment
down, under the "need_resched_nonpreemptible:" label.
- Try to update the comment after context_switch().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100519125711.GA30199@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For people who otherwise get to write: cpu_clock(smp_processor_id()),
there is now: local_clock().
Also, as per suggestion from Andrew, provide some documentation on
the various clock interfaces, and minimize the unsigned long long vs
u64 mess.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
LKML-Reference: <1275052414.1645.52.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Concurrency managed workqueue needs to know when workers are going to
sleep and waking up. Using these two hooks, cmwq keeps track of the
current concurrency level and throttles execution of new works if it's
too high and wakes up another worker from the sleep hook if it becomes
too low.
This patch introduces PF_WQ_WORKER to identify workqueue workers and
adds the following two hooks.
* wq_worker_waking_up(): called when a worker is woken up.
* wq_worker_sleeping(): called when a worker is going to sleep and may
return a pointer to a local task which should be woken up. The
returned task is woken up using try_to_wake_up_local() which is
simplified ttwu which is called under rq lock and can only wake up
local tasks.
Both hooks are currently defined as noop in kernel/workqueue_sched.h.
Later cmwq implementation will replace them with proper
implementation.
These hooks are hard coded as they'll always be enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Factor ttwu_activate() and ttwu_woken_up() out of try_to_wake_up().
The factoring out doesn't affect try_to_wake_up() much
code-generation-wise. Depending on configuration options, it ends up
generating the same object code as before or slightly different one
due to different register assignment.
This is to help future implementation of try_to_wake_up_local().
Mike Galbraith suggested rename to ttwu_post_activation() from
ttwu_woken_up() and comment update in try_to_wake_up().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Currently, when a cpu goes down, cpu_active is cleared before
CPU_DOWN_PREPARE starts and cpuset configuration is updated from a
default priority cpu notifier. When a cpu is coming up, it's set
before CPU_ONLINE but cpuset configuration again is updated from the
same cpu notifier.
For cpu notifiers, this presents an inconsistent state. Threads which
a CPU_DOWN_PREPARE notifier expects to be bound to the CPU can be
migrated to other cpus because the cpu is no more inactive.
Fix it by updating cpu_active in the highest priority cpu notifier and
cpuset configuration in the second highest when a cpu is coming up.
Down path is updated similarly. This guarantees that all other cpu
notifiers see consistent cpu_active and cpuset configuration.
cpuset_track_online_cpus() notifier is converted to
cpuset_update_active_cpus() which just updates the configuration and
now called from cpuset_cpu_[in]active() notifiers registered from
sched_init_smp(). If cpuset is disabled, cpuset_update_active_cpus()
degenerates into partition_sched_domains() making separate notifier
for !CONFIG_CPUSETS unnecessary.
This problem is triggered by cmwq. During CPU_DOWN_PREPARE, hotplug
callback creates a kthread and kthread_bind()s it to the target cpu,
and the thread is expected to run on that cpu.
* Ingo's test discovered __cpuinit/exit markups were incorrect.
Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Menage <menage@google.com>
Instead of hardcoding priority 10 and 20 in sched and perf, collect
them into CPU_PRI_* enums.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
PROVE_RCU has a few issues with the cpu_cgroup because the scheduler
typically holds rq->lock around the css rcu derefs but the generic
cgroup code doesn't (and can't) know about that lock.
Provide means to add extra checks to the css dereference and use that
in the scheduler to annotate its users.
The addition of rq->lock to these checks is correct because the
cgroup_subsys::attach() method takes the rq->lock for each task it
moves, therefore by holding that lock, we ensure the task is pinned to
the current cgroup and the RCU derefence is valid.
That leaves one genuine race in __sched_setscheduler() where we used
task_group() without holding any of the required locks and thus raced
with the cgroup code. Solve this by moving the check under the
appropriate lock.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic reported that frequency driven swevents didn't work properly
and even caused a division-by-zero error.
It turns out there are two bugs, the division-by-zero comes from a
failure to deal with that in perf_calculate_period().
The other was more interesting and turned out to be a wrong comparison
in perf_adjust_period(). The comparison was between an s64 and u64 and
got implicitly converted to an unsigned comparison. The problem is
that period_left is typically < 0, so it ended up being always true.
Cure this by making the local period variables s64.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: fix bne2 "gave up waiting for init of module libcrc32c"
module: verify_export_symbols under the lock
module: move find_module check to end
module: make locking more fine-grained.
module: Make module sysfs functions private.
module: move sysfs exposure to end of load_module
module: fix kdb's illicit use of struct module_use.
module: Make the 'usage' lists be two-way
Problem: it's hard to avoid an init routine stumbling over a
request_module these days. And it's not clear it's always a bad idea:
for example, a module like kvm with dynamic dependencies on kvm-intel
or kvm-amd would be neater if it could simply request_module the right
one.
In this particular case, it's libcrc32c:
libcrc32c_mod_init
crypto_alloc_shash
crypto_alloc_tfm
crypto_find_alg
crypto_alg_mod_lookup
crypto_larval_lookup
request_module
If another module is waiting inside resolve_symbol() for libcrc32c to
finish initializing (ie. bne2 depends on libcrc32c) then it does so
holding the module lock, and our request_module() can't make progress
until that is released.
Waiting inside resolve_symbol() without the lock isn't all that hard:
we just need to pass the -EBUSY up the call chain so we can sleep
where we don't hold the lock. Error reporting is a bit trickier: we
need to copy the name of the unfinished module before releasing the
lock.
Other notes:
1) This also fixes a theoretical issue where a weak dependency would allow
symbol version mismatches to be ignored.
2) We rename use_module to ref_module to make life easier for the only
external user (the out-of-tree ksplice patches).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Abbot <tabbott@ksplice.com>
Tested-by: Brandon Philips <bphilips@suse.de>
It disabled preempt so it was "safe", but nothing stops another module
slipping in before this module is added to the global list now we don't
hold the lock the whole time.
So we check this just after we check for duplicate modules, and just
before we put the module in the global list.
(find_symbol finds symbols in coming and going modules, too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I think Rusty may have made the lock a bit _too_ finegrained there, and
didn't add it to some places that needed it. It looks, for example, like
PATCH 1/2 actually drops the lock in places where it's needed
("find_module()" is documented to need it, but now load_module() didn't
hold it at all when it did the find_module()).
Rather than adding a new "module_loading" list, I think we should be able
to just use the existing "modules" list, and just fix up the locking a
bit.
In fact, maybe we could just move the "look up existing module" a bit
later - optimistically assuming that the module doesn't exist, and then
just undoing the work if it turns out that we were wrong, just before
adding ourselves to the list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Kay Sievers <kay.sievers@vrfy.org> reports that we still have some
contention over module loading which is slowing boot.
Linus also disliked a previous "drop lock and regrab" patch to fix the
bne2 "gave up waiting for init of module libcrc32c" message.
This is more ambitious: we only grab the lock where we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
These were placed in the header in ef665c1a06 to get the various
SYSFS/MODULE config combintations to compile.
That may have been necessary then, but it's not now. These functions
are all local to module.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
This means a little extra work, but is more logical: we don't put
anything in sysfs until we're about to put the module into the
global list an parse its parameters.
This also gives us a logical place to put duplicate module detection
in the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus changed the structure, and luckily this didn't compile any more.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>
When adding a module that depends on another one, we used to create a
one-way list of "modules_which_use_me", so that module unloading could
see who needs a module.
It's actually quite simple to make that list go both ways: so that we
not only can see "who uses me", but also see a list of modules that are
"used by me".
In fact, we always wanted that list in "module_unload_free()": when we
unload a module, we want to also release all the other modules that are
used by that module. But because we didn't have that list, we used to
first iterate over all modules, and then iterate over each "used by me"
list of that module.
By making the list two-way, we simplify module_unload_free(), and it
allows for some trivial fixes later too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned & rebased)
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (27 commits)
block: make blk_init_free_list and elevator_init idempotent
block: avoid unconditionally freeing previously allocated request_queue
pipe: change /proc/sys/fs/pipe-max-pages to byte sized interface
pipe: change the privilege required for growing a pipe beyond system max
pipe: adjust minimum pipe size to 1 page
block: disable preemption before using sched_clock()
cciss: call BUG() earlier
Preparing 8.3.8rc2
drbd: Reduce verbosity
drbd: use drbd specific ratelimit instead of global printk_ratelimit
drbd: fix hang on local read errors while disconnected
drbd: Removed the now empty w_io_error() function
drbd: removed duplicated #includes
drbd: improve usage of MSG_MORE
drbd: need to set socket bufsize early to take effect
drbd: improve network latency, TCP_QUICKACK
drbd: Revert "drbd: Create new current UUID as late as possible"
brd: support discard
Revert "writeback: fix WB_SYNC_NONE writeback from umount"
Revert "writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync"
...
The commit 80b5184cc5 ("kernel/: convert cpu
notifier to return encapsulate errno value") changed the return value of
cpu notifier callbacks.
Those callbacks don't return NOTIFY_BAD on failures anymore. But there
are a few callbacks which are called directly at init time and checking
the return value.
I forgot to change BUG_ON checking by the direct callers in the commit.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Child groups should have a greater depth than their parents. Prior to
this change, the parent would incorrectly report zero memory usage for
child cgroups when use_hierarchy is enabled.
test script:
mount -t cgroup none /cgroups -o memory
cd /cgroups
mkdir cg1
echo 1 > cg1/memory.use_hierarchy
mkdir cg1/cg11
echo $$ > cg1/cg11/tasks
dd if=/dev/zero of=/tmp/foo bs=1M count=1
echo
echo CHILD
grep cache cg1/cg11/memory.stat
echo
echo PARENT
grep cache cg1/memory.stat
echo $$ > tasks
rmdir cg1/cg11 cg1
cd /
umount /cgroups
Using fae9c79, a recent patch that changed alloc_css_id() depth computation,
the parent incorrectly reports zero usage:
root@ubuntu:~# ./test
1+0 records in
1+0 records out
1048576 bytes (1.0 MB) copied, 0.0151844 s, 69.1 MB/s
CHILD
cache 1048576
total_cache 1048576
PARENT
cache 0
total_cache 0
With this patch, the parent correctly includes child usage:
root@ubuntu:~# ./test
1+0 records in
1+0 records out
1048576 bytes (1.0 MB) copied, 0.0136827 s, 76.6 MB/s
CHILD
cache 1052672
total_cache 1052672
PARENT
cache 0
total_cache 1052672
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: <stable@kernel.org> [2.6.34.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
task_struct->pesonality is "unsigned int", but sys_personality() paths use
"unsigned long pesonality". This means that every assignment or
comparison is not right. In particular, if this argument does not fit
into "unsigned int" __set_personality() changes the caller's personality
and then sys_personality() returns -EINVAL.
Turn this argument into "unsigned int" and avoid overflows. Obviously,
this is the user-visible change, we just ignore the upper bits. But this
can't break the sane application.
There is another thing which can confuse the poorly written applications.
User-space thinks that this syscall returns int, not long. This means
that the returned value can be negative and look like the error code. But
note that libc won't be confused and thus errno won't be set, and with
this patch the user-space can never get -1 unless sys_personality() really
fails. And, most importantly, the negative RET != -1 is only possible if
that app previously called personality(RET).
Pointed-out-by: Wenming Zhang <wezhang@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched, trace: Fix sched_switch() prev_state argument
sched: Fix wake_affine() vs RT tasks
sched: Make sure timers have migrated before killing the migration_thread
* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix crash in swevents
perf buildid-list: Fix --with-hits event processing
perf scripts python: Give field dict to unhandled callback
perf hist: fix objdump output parsing
perf-record: Check correct pid when forking
perf: Do the comm inheritance per thread in event__process_task
perf: Use event__process_task from perf sched
perf: Process comm events by tid
blktrace: Fix new kernel-doc warnings
perf_events: Fix unincremented buffer base on partial copy
perf_events: Fix event scheduling issues introduced by transactional API
perf_events, trace: Fix perf_trace_destroy(), mutex went missing
perf_events, trace: Fix probe unregister race
perf_events: Fix races in group composition
perf_events: Fix races and clean up perf_event and perf_mmap_data interaction
Frederic reported that because swevents handling doesn't disable IRQs
anymore, we can get a recursion of perf_adjust_period(), once from
overflow handling and once from the tick.
If both call ->disable, we get a double hlist_del_rcu() and trigger
a LIST_POISON2 dereference.
Since we don't actually need to stop/start a swevent to re-programm
the hardware (lack of hardware to program), simply nop out these
callbacks for the swevent pmu.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275557609.27810.35218.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This changes the interface to be based on bytes instead. The API
matches that of F_SETPIPE_SZ in that it rounds up the passed in
size so that the resulting page array is a power-of-2 in size.
The proc file is renamed to /proc/sys/fs/pipe-max-size to
reflect this change.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In commit e9fb7631eb ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") the new helper functions access
cpu_chain. As a result, it shouldn't be marked __cpuinitdata (via
section mismatch warning).
Alternatively, the helper functions should be forced inline, or marked
__ref or __cpuinit. In the meantime, this patch silences the warning
the trivial way.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
kbuild: Revert part of e8d400a to resolve a conflict
kbuild: Fix checking of scm-identifier variable
gconfig: add support to show hidden options that have prompts
menuconfig: add support to show hidden options which have prompts
gconfig: remove show_debug option
gconfig: remove dbg_print_ptype() and dbg_print_stype()
kconfig: fix zconfdump()
kconfig: some small fixes
add random binaries to .gitignore
kbuild: Include gen_initramfs_list.sh and the file list in the .d file
kconfig: recalc symbol value before showing search results
.gitignore: ignore *.lzo files
headerdep: perlcritic warning
scripts/Makefile.lib: Align the output of LZO
kbuild: Generate modules.builtin in make modules_install
Revert "kbuild: specify absolute paths for cscope"
kbuild: Do not unnecessarily regenerate modules.builtin
headers_install: use local file handles
headers_check: fix perl warnings
export_report: fix perl warnings
...
Mike reports that since e9e9250b (sched: Scale down cpu_power due to RT
tasks), wake_affine() goes funny on RT tasks due to them still having a
!0 weight and wake_affine() still subtracts that from the rq weight.
Since nobody should be using se->weight for RT tasks, set the value to
zero. Also, since we now use ->cpu_power to normalize rq weights to
account for RT cpu usage, add that factor into the imbalance computation.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275316109.27810.22969.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rafael sees a sometimes crash at precpu_modfree from kernel/module.c; it
only occurred with another (since-reverted) patch, but that patch simply
changed timing to uncover this bug, it was otherwise unrelated.
The comment about the mod being freed is self-explanatory, but neither
Tejun nor I read it. This bug was introduced in 259354deaa, after it
had previously been fixed in 6e2b75740b. How embarrassing.
Reported-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Embarrassingly-Acked-by: Tejun Heo <tj@kernel.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix blktrace.c kernel-doc warnings:
Warning(kernel/trace/blktrace.c:858): No description found for parameter 'ignore'
Warning(kernel/trace/blktrace.c:890): No description found for parameter 'ignore'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100529114507.c466fc1e.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If a sample size crosses to the next page boundary, the copy
will be made in more than one step. However we forget to advance
the source offset for the next copy, leading to unexpected double
copies that completely mess up the traces.
This fixes various kinds of bad traces that have irrelevant
data inside, as an example:
geany-4979 [001] 5758.077775: sched_switch: prev_comm=! prev_pid=121
prev_prio=0 prev_state=S|D|Z|X|x ==> next_comm= next_pid=7497072
next_prio=0
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274988898-5639-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The transactional API patch between the generic and model-specific
code introduced several important bugs with event scheduling, at
least on X86. If you had pinned events, e.g., watchdog, and were
over-committing the PMU, you would get bogus counts. The bug was
showing up on Intel CPU because events would move around more
often that on AMD. But the problem also existed on AMD, though
harder to expose.
The issues were:
- group_sched_in() was missing a cancel_txn() in the error path
- cpuc->n_added was not properly maintained, leading to missing
actions in hw_perf_enable(), i.e., n_running being 0. You cannot
update n_added until you know the transaction has succeeded. In
case of failed transaction n_added was not adjusted back.
- in case of failed transactions, event_sched_out() was called
and eventually invoked x86_disable_event() to touch the HW reg.
But with transactions, on X86, event_sched_in() does not touch
HW registers, it simply collects events into a list. Thus, you
could end up calling x86_disable_event() on a counter which
did not correspond to the current event when idx != -1.
The patch modifies the generic and X86 code to avoid all those problems.
First, we keep track of the number of events added last. In case the
transaction fails, we substract them from n_added. This approach is
necessary (as opposed to delaying updates to n_added) because not all
event updates use the transaction API, e.g., single events.
Second, we encapsulate the event_sched_in() and event_sched_out() in
group_sched_in() inside the transaction. That makes the operations
symmetrical and you can also detect that you are inside a transaction
and skip the HW reg access by checking cpuc->group_flag.
With this patch, you can now overcommit the PMU even with pinned
system-wide events present and still get valid counts.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274796225.5882.1389.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steve spotted I forgot to do the destroy under event_mutex.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274451913.1674.1707.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
tracepoint_probe_unregister() does not synchronize against the probe
callbacks, so do that explicitly. This properly serializes the callbacks
and the free of the data used therein.
Also, use this_cpu_ptr() where possible.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274438476.1674.1702.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Group siblings don't pin each-other or the parent, so when we destroy
events we must make sure to clean up all cross referencing pointers.
In particular, for destruction of a group leader we must be able to
find all its siblings and remove their reference to it.
This means that detaching an event from its context must not detach it
from the group, otherwise we can end up failing to clear all pointers.
Solve this by clearly separating the attachment to a context and
attachment to a group, and keep the group composed until we destroy
the events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to move toward separate buffer objects, rework the whole
perf_mmap_data construct to be a more self-sufficient entity, one
with its own lifetime rules.
This greatly sanitizes the whole output redirection code, which
was riddled with bugs and races.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Problem: In a stress test where some heavy tests were running along with
regular CPU offlining and onlining, a hang was observed. The system seems
to be hung at a point where migration_call() tries to kill the
migration_thread of the dying CPU, which just got moved to the current
CPU. This migration thread does not get a chance to run (and die) since
rt_throttled is set to 1 on current, and it doesn't get cleared as the
hrtimer which is supposed to reset the rt bandwidth
(sched_rt_period_timer) is tied to the CPU which we just marked dead!
Solution: This patch pushes the killing of migration thread to
"CPU_POST_DEAD" event. By then all the timers (including
sched_rt_period_timer) should have got migrated (along with other
callbacks).
Signed-off-by: Amit Arora <aarora@in.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20100525132346.GA14986@amitarora.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
