We are checking cp_irq_count from the wrong hdcp structure which
ends up giving timed out errors. We only increment the cp_irq_count
of the primary connector's hdcp structure but here in case of
multidisplay setup we end up checking the secondary connector's hdcp
structure, which will not have its cp_irq_count incremented. This leads
to a timed out at CP_IRQ error even though a CP_IRQ was raised. Extract
it from the correct intel_hdcp structure.
--v2
-Explain why it was the wrong hdcp structure [Jani]
Fixes: 8c9e4f68b8 ("drm/i915/hdcp: Use per-device debugs")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809114127.3940699-2-suraj.kandpal@intel.com
(cherry picked from commit dd92590263)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
__i915_ttm_get_pages was updated to use flags instead of the separate
'busy' placement list. However, the behaviour was subtly changed.
Originally, the function would attempt to use the preferred placement
without eviction, and give an opportunity to restart the operation
before falling back to allowing eviction.
This was unintentionally changed, as the preferred placement was not
given the TTM_PL_FLAG_DESIRED flag, and so eviction could be triggered
in that first pass. This caused thrashing, and a significant performance
regression on DG2 systems with small BAR. For example, Minecraft and
Team Fortress 2 would drop to single-digit framerates.
Restore the original behaviour by marking the initial placement as
desired on that first attempt. Also, rework this to use a separate
struct ttm_palcement, as the individual placements are marked 'const',
so hot-patching the flags is even more dodgy than before.
Thanks to Justin Brewer for bisecting this.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-3-david@davidgow.net
(cherry picked from commit 92653f2a57)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
the old system of having a separate placement list (for placements
which should be used without eviction) and a 'busy' placement list (for
placements which should be attempted if eviction is required) was
replaced with a new one where placements could be marked 'FALLBACK' (to
be attempted if eviction is required) or 'DESIRED' (to be attempted
first, but not if eviction is required).
i915 had always included the requested placement in the list of
'busy' placements: i.e., the placement could be used either if eviction
is required or not. But when the new system was put in place, the
requested (first) placement was marked 'DESIRED', so would never be used
if eviction became necessary. While a bug in the original commit
prevented this flag from working, when this was fixed in
4a0e7b3c ("drm/i915: fix applying placement flag"), it caused long hangs
on DG2 systems with small BAR.
Don't mark the requested placement DESIRED (or FALLBACK), allowing it to
be used in both situations. This matches the old behaviour, and resolves
the hangs.
Thanks to Justin Brewer for bisecting the issue.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Fixes: 4a0e7b3c37 ("drm/i915: fix applying placement flag")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-2-david@davidgow.net
(cherry picked from commit 54bf0af908)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af18 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <jannh@google.com>
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
[Joonas: Add Requires: tag]
Requires: 60a2066c50 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com
(cherry picked from commit 97b6784753)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When mapping a framebuffer object, the virtual memory area (VMA)
offset ('vm_pgoff') should be adjusted by the start of the
'vma_node' associated with the object. This ensures that the VMA
offset is correctly aligned with the corresponding offset within
the GGTT aperture.
Increment vm_pgoff by the start of the vma_node with the offset=
provided by the user.
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
[Joonas: Add Cc: stable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-2-andi.shyti@linux.intel.com
(cherry picked from commit 60a2066c50)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On the PCH side the second PPS was introduced in ICP+.Add condition
On MTL_PCH and greater platform also having the second PPS.
Note that DG1/2 south block only has the single PPS, so need
to exclude the fake DG1/2 PCHs
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11488
Fixes: 93cbc1accb ("drm/i915/mtl: Add fake PCH for Meteor Lake")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801111141.574854-1-dnyaneshwar.bhadane@intel.com
(cherry picked from commit da1878b61c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.
Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 82d3543701 ("drm/i915/skl: Implementation of SKL DPLL programming")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru
(cherry picked from commit 833cf12846)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fix HDCP2_STREAM_STATUS macro, it called pipe instead of port never
threw a compile error as no one used it.
--v2
-Add Fixes [Jani]
Fixes: d631b984cc ("drm/i915/hdcp: Add HDCP 2.2 stream register")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730035505.3759899-1-suraj.kandpal@intel.com
(cherry picked from commit 73d7cd542b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
PWR_CLK_STATE only needs to be modified up until gen11. For gen12 this
code is not applicable. Remove code to update context image with
PWR_CLK_STATE for gen12.
Fixes: 00a7f0d715 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240629005643.3050678-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7b5bdae774)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
amdgpu:
- Bump driver version for GFX12 DCC
- DC documention warning fixes
- VCN unified queue power fix
- SMU fix
- RAS fix
- Display corruption fix
- SDMA 5.2 workaround
- GFX12 fixes
- Uninitialized variable fix
- VCN/JPEG 4.0.3 fixes
- Misc display fixes
- RAS fixes
- VCN4/5 harvest fix
- GPU reset fix
i915:
- Reset intel_dp->link_trained before retraining the link
- Don't switch the LTTPR mode on an active link
- Do not consider preemption during execlists_dequeue for gen8
- Allow NULL memory region
xe:
- xe_exec ioctl minor fix on sync entry cleanup upon error
- SRIOV: limit VF LMEM provisioning
- Wedge mode fixes
v3d:
- fix indirect dispatch on newer v3d revs
panel:
- fix panel backlight bindings
-----BEGIN PGP SIGNATURE-----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=R3HS
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-26' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Fixes for rc1, mostly amdgpu, i915 and xe, with some other misc ones,
doesn't seem to be anything too serious.
amdgpu:
- Bump driver version for GFX12 DCC
- DC documention warning fixes
- VCN unified queue power fix
- SMU fix
- RAS fix
- Display corruption fix
- SDMA 5.2 workaround
- GFX12 fixes
- Uninitialized variable fix
- VCN/JPEG 4.0.3 fixes
- Misc display fixes
- RAS fixes
- VCN4/5 harvest fix
- GPU reset fix
i915:
- Reset intel_dp->link_trained before retraining the link
- Don't switch the LTTPR mode on an active link
- Do not consider preemption during execlists_dequeue for gen8
- Allow NULL memory region
xe:
- xe_exec ioctl minor fix on sync entry cleanup upon error
- SRIOV: limit VF LMEM provisioning
- Wedge mode fixes
v3d:
- fix indirect dispatch on newer v3d revs
panel:
- fix panel backlight bindings"
* tag 'drm-next-2024-07-26' of https://gitlab.freedesktop.org/drm/kernel: (39 commits)
drm/amdgpu: reset vm state machine after gpu reset(vram lost)
drm/amdgpu: add missed harvest check for VCN IP v4/v5
drm/amdgpu: Fix eeprom max record count
drm/amdgpu: fix ras UE error injection failure issue
drm/amd/display: Remove ASSERT if significance is zero in math_ceil2
drm/amd/display: Check for NULL pointer
drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF
drm/amdgpu: Add empty HDP flush function to VCN v4.0.3
drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3
drm/amd/amdgpu: Fix uninitialized variable warnings
drm/amdgpu: Fix atomics on GFX12
drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell
drm/i915: Allow NULL memory region
drm/i915/gt: Do not consider preemption during execlists_dequeue for gen8
dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
drm/xe: Don't suspend device upon wedge
drm/xe: Wedge the entire device
drm/xe/pf: Limit fair VF LMEM provisioning
drm/xe/exec: Fix minor bug related to xe_sync_entry_cleanup
drm/amd/display: fix corruption with high refresh rates on DCN 3.0
...
We're seeing a GPU hang issue on a CHV platform, which was caused by commit
bac24f59f4 ("drm/i915/execlists: Enable coarse preemption boundaries for
Gen8").
The Gen8 platform only supports timeslicing and doesn't have a preemption
mechanism, as its engines do not have a preemption timer.
Commit 751f82b353 ("drm/i915/gt: Only disable preemption on Gen8 render
engines") addressed this issue only for render engines. This patch extends
that fix by ensuring that preemption is not considered for all engines on
Gen8 platforms.
v4:
- Use the correct Fixes tag (Rodrigo Vivi)
- Reworded commit log (Andi Shyti)
v3:
- Inside need_preempt(), condition of can_preempt() is not required
as simplified can_preempt() is enough. (Chris Wilson)
v2: Simplify can_preempt() function (Tvrtko Ursulin)
Fixes: 751f82b353 ("drm/i915/gt: Only disable preemption on gen8 render engines")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11396
Suggested-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
CC: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711163208.1355736-1-nitin.r.gote@intel.com
(cherry picked from commit 7df0be6e62)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Kuan-Wei Chiu has significantly reworked the min_heap library code and
has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally more
rational.
- Kuan-Wei Chiu has sent along some maintenance work against our sorting
library code in the series "lib/sort: Optimizations and cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB
command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2GvwAKCRDdBJ7gKXxA
jlf/AP48xP5ilIHbtpAKm2z+MvGuTxJQ5VSC0UXFacuCbc93lAEA+Yo+vOVRmh6j
fQF2nVKyKLYfSz7yqmCyAaHWohIYLgg=
=Stxz
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
Switching to transparent mode leads to a loss of link synchronization,
so prevent doing this on an active link. This happened at least on an
Intel N100 system / DELL UD22 dock, the LTTPR residing either on the
host or the dock. To fix the issue, keep the current mode on an active
link, adjusting the LTTPR count accordingly (resetting it to 0 in
transparent mode).
v2: Adjust code comment during link training about reiniting the LTTPRs.
(Ville)
Fixes: 7b2a4ab8b0 ("drm/i915: Switch to LTTPR transparent mode link training")
Reported-and-tested-by: Gareth Yu <gareth.yu@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10902
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-3-imre.deak@intel.com
(cherry picked from commit 211ad49cf8)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Regularly retraining a link during an atomic commit happens with the
given pipe/link already disabled and hence intel_dp->link_trained being
false. Ensure this also for retraining a DP SST link via direct calls to
the link training functions (vs. an actual commit as for DP MST). So far
nothing depended on this, however the next patch will depend on
link_trained==false for changing the LTTPR mode to non-transparent.
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-2-imre.deak@intel.com
(cherry picked from commit a4d5ce6176)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaB0NweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkvwH/36UJRk/o6wvXnyH
E6QjCSWo2226APyWks22NjtC3I/8Iqdvkneuh6wG0qL2sXAB078EMjUq5R81bF8H
wWFBJwetjYTp8GEyLioMEb2wCH/J3R29dLFC4UYTplafXRGP6//xcpJaKmTxcgdR
31IzvTPXbApZ7L3k1U6rA2bK9PNKcFCOvZlrNMUCuwMrabymHsDfOUt1DqXyg2xp
zjqiWYBwlklozmgawSWt/mdEgkWuTcAbg+KyqDVQF59s9aj/OOwZ0j+HACq5V8CM
quTPIAYL6CC9p7uxa69lGr/sgC0Is/BZLPX7RTZAwCgarGvnX+1HUsjDcaFCtrVg
O6fPUV8=
=pgUx
-----END PGP SIGNATURE-----
Merge v6.10-rc6 into drm-next
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There were several instances of the string "assocat" in the kernel, which
should have been spelled "associat", with the various endings of -ive,
-ed, -ion, and sometimes beginnging with dis-.
Add to the spelling dictionary the corrections so that future instances
will be caught by checkpatch, and fix the instances found.
Originally noticed by accident with a 'git grep socat'.
Link: https://lkml.kernel.org/r/20240612001247.356867-1-jesse.brandeburg@intel.com
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In TBT-alt mode the driver doesn't program the PHY's PLL, which is
handled instead by Thunderbolt driver/FW components, hence the PLL's HW
vs. SW state verification should be skipped. During HW readout set a flag
in the PLL state if the port was at the moment in TBT-alt mode and skip
the verification of PLL parameters in this case.
Fixes: 45fe957ae7 ("drm/i915/display: Add compare config for MTL+ platforms")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11258
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626170813.806470-1-imre.deak@intel.com
DSB_STATUS bit 16 is supposed to be a sticky bit informing us whether
the DSB was idle or not when the pipe's delayed vblank (when double
buffered registers latch) occurred. Unfortunately it turns out this
is a level triggred signal, ie. the bit will be set whenever the
DSB is busy during the scanline window between start of delayed
vblank and vtotal. Try to document that fact by renaming the bit.
Sadly this also thwarts my plan to use this bit to sanity check
that the (to be introduced) DSB based vblank evasion did its job
correctly. That would require an edge triggered signal instead.
So looks like we'll have to rely mostly on luck instead :(
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611133344.30673-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
There are couple of bits in PSR2_CTL which needs to be written in case of
eDP Panel Replay
Bspec: 68920
v2: use boolean instead of assuming eDP Panel Replay mean Early Transport
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-12-jouni.hogander@intel.com
Move Early Transport validity check to be performed for Panel Replay as
well and use Early Transport for eDP Panel Replay always.
v2:set crtc_state->enable_psr2_su_region_et directly (not in if block)
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-11-jouni.hogander@intel.com
eDP1.5 support ALPM with Panel Replay as well. We need to check ALPM
related things for Panel Replay as well.
Bspec: 68920
v5:
- instead of using crtc_state->has_panel_replay provide aux_less flag
v4:
- do not move _compute_psr2_sdp_prior_scanline_indication
- move ALPM related checks to separate function
v3: move vblank check as well
v2: do not move Vblank >= PSR2_CTL Block Count Number maximum line count
check
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-9-jouni.hogander@intel.com
Take into account in Panel Replay compute config that HW will not allow PR
on eDP when HDCP enabled.
v2: add debug message to print out why Panel Replay is not possible
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-7-jouni.hogander@intel.com
Take into account that 128b/132b Panel Replay is not supported on eDP.
Bspec: 68920
v2:
- make crtc_state as const
- add debug message to print out why Panel Replay is not possible
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-6-jouni.hogander@intel.com
eDP1.5 allows Panel Replay on eDP as well. Take this into account when
enabling sink PSR/Panel Replay. Write also PANEL_REPLAY_CONFIG2 register
accordingly.
v3:
- set DP_PANEL_REPLAY_CRC_VERIFICATION in PANEL_REPLAY_CONFIG2
- PANEL_REPLAY_CONFIG2 is available in DP2.1 as well
v2: do not configure ALPM for DP2.0 Panel Replay
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-4-jouni.hogander@intel.com
Our HW doesn't support Panel Replay without AUX_LESS ALPM on eDP. Check
panel support for this and prevent eDP panel replay if it doesn't exits.
Bspec: 68920
v3: remove excessive parens
v2: use intel_alpm_aux_less_wake_supported
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-2-jouni.hogander@intel.com
In case of legacy cursor update, the cursor VMA needs to be unpinned
only after vblank. This exceeds the lifetime of the whole atomic commit.
Any trick I attempted to keep the atomic commit alive didn't work, as
drm_atomic_helper_setup_commit() force throttles on any old commit that
wasn't cleaned up.
The only option remaining is to remove the plane from the atomic commit,
and use the same path as the legacy cursor update to clean the state
after vblank.
Changes since previous version:
- Call the memset for plane state immediately when scheduling vblank,
this prevents a use-after-free in cursor cleanup.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522053341.137592-4-maarten.lankhorst@linux.intel.com
The cursor hardware only does sync updates, and thus the hardware
will be scanning out from the old fb until the next start of vblank.
So in order to make the legacy cursor fastpath actually safe we
should not unpin the old fb until we're sure the hardware has
ceased accessing it. The simplest approach is to just use a vblank
work here to do the delayed unpin.
Not 100% sure it's a good idea to put this onto the same high
priority vblank worker as eg. our timing critical gamma updates.
But let's keep it simple for now, and it we later discover that
this is causing problems we can think about adding a lower
priority worker for such things.
This patch is slightly reworked by Maarten
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522053341.137592-3-maarten.lankhorst@linux.intel.com
I don't think the display hardware really has such chroma
plane tile row alignment requirements as outlined in
commit d156135e6a ("drm/i915/tgl: Make sure a semiplanar
UV plane is tile row size aligned")
Bspec had the same exact thing to say about earlier hardware
as well, but we never cared and things work just fine.
The one thing mentioned in that commit that is definitely
true however is the fence alignment issue. But we don't
deal with that on earlier hardware either. We do have code
to deal with that issue for the first color plane, but not
the chroma planes. So I think if we did want to check this
more extensively we should do it in the same places where
we already check the first color plane (namely
convert_plane_offset_to_xy() and intel_fb_bo_framebuffer_init()).
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-10-ville.syrjala@linux.intel.com
Currently we still use the SKL+ PLANE_SURF alignment even
for TGL+ even though the hardware no longer needs it.
Introduce a separate tgl_plane_min_alignment() and update
it to more accurately reflect the hardware requirements.
v2: Don't screw up DPT+semiplanar 2MiB alignment
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-9-ville.syrjala@linux.intel.com
Now that all pre-skl platforms have their own .min_alignment()
functions the remainder of intel_surf_alignment() can be hoisted
into skl_univerals_plane.c (and renamed appropriately).
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-8-ville.syrjala@linux.intel.com
Different planes could have different alignment requirements
even for the same format/modifier. Collect the alignment
requirements across all planes capable of scanning out the
fb such that the alignment is satisfactory to all those
planes.
So far this was sort of handled by making sure intel_surf_alignment()
declares the superset of all planes' alignment requirements,
but maintaining that manually is annoying. So we're going to move
towards each plane declaring only its own requirements, and thus
we need code to generate the superset.
v2: Drop the borked per-plane vma optimization (Imre)
Assert that the plane's declared alignment is POT (Imre)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Different hardware generations have different scanout alignment
requirements. Introduce a new vfunc that will allow us to
make that distinction without horrible if-ladders.
For now we directly plug in the existing intel_surf_alignment()
and intel_cursor_alignment() functions.
For fbdev we (temporarily) introduce intel_fbdev_min_alignment()
that simply queries the alignment from the primary plane of
the first crtc.
TODO: someone will need to fix xe's alignment handling
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-4-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d5 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee3509
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
Fixes: 0d86ee3509 ("drm/i915/gt: Make fence revocation unequivocal")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.8+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 24bb052d3d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Setting DP_PSR_SU_REGION_SCANLINE_CAPTURE (Selective Update Region Scan
Line Capture Indication in spec) bit was dropped when psr_enable_sink was
split to _psr_enable_sink and _panel_replay_enable_sink. Add setting it
back.
Fixes: 32f0045f90 ("drm/i915/psr: Split enabling sink for PSR and Panel Replay")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620103312.903977-1-jouni.hogander@intel.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
word configurable, support RGB888, and allow pixel formats to be
specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
- bridge-connector: Plumb in the new HDMI helpers
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes
- panels:
- More cleanup of prepare / enable state tracking in drivers
- New panel: PrimeView PM070WL4,
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZmqkZAAKCRDj7w1vZxhR
xUUeAP9ZuOvD8dGBFvR95yXQpsoaxyrC37zsckCo87SWRsyg3QEAmxmzdhgsGzKX
lXd3KsF/i1nOPflG9QeMj/lfroE28ww=
=k2mC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-06-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
word configurable, support RGB888, and allow pixel formats to be
specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
- bridge-connector: Plumb in the new HDMI helpers
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes
- panels:
- More cleanup of prepare / enable state tracking in drivers
- New panel: PrimeView PM070WL4,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613-cicada-of-infinite-unity-0955ca@houat
Pass intel_display to the encoder suspend/shutdown helpers instead of
drm_i915_private for better isolation.
v2: Pass intel_display to HAS_DISPLAY() as well, update commit log
accordingly. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618125255.4080303-2-imre.deak@intel.com
