Commit Graph

40 Commits

Author SHA1 Message Date
Tom Haynes
d67ae825a5 pnfs/flexfiles: Add the FlexFile Layout Driver
The flexfile layout is a new layout that extends the
file layout. It is currently being drafted as a specification at
https://datatracker.ietf.org/doc/draft-ietf-nfsv4-layout-types/

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Tao Peng <bergwolf@primarydata.com>
2015-02-03 11:06:52 -08:00
Tom Haynes
f54bcf2ece pnfs: Prepare for flexfiles by pulling out common code
The flexfilelayout driver will share some common code
with the filelayout driver. This set of changes refactors
that common code out to avoid any module depenencies.

Signed-off-by: Tom Haynes <loghyr@primarydata.com>
2015-02-03 11:06:31 -08:00
Anna Schumaker
1c6dcbe5ce NFS: Implement SEEK
The SEEK operation is used when an application makes an lseek call with
either the SEEK_HOLE or SEEK_DATA flags set.  I fall back on
nfs_file_llseek() if the server does not have SEEK support.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-30 16:24:56 -04:00
Tom Haynes
b5968725f4 Push the file layout driver into a subdirectory
The object and block layouts already exist in their own
subdirectories. This patch completes the set!

Note that as a layout denotes nfs4 already, I stripped
that prefix out of the file names.

Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-29 20:21:56 -04:00
Chuck Lever
9d33059c1b NFS: Enable slot table helpers for NFSv4.0
I'd like to re-use NFSv4.1's slot table machinery for NFSv4.0
transport blocking.  Re-organize some of nfs4session.c so the slot
table code is built even when NFS_V4_1 is disabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-03 15:26:33 -04:00
Trond Myklebust
c6d01c6f9b NFSv4: Add tracepoints for debugging state management problems
Set up basic tracepoints for debugging client id creation/destruction
and session creation/destruction.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:21 -04:00
Trond Myklebust
f4ce1299b3 NFS: Add event tracing for generic NFS events
Add tracepoints for inode attribute updates, attribute revalidation,
writeback start/end fsync start/end, attribute change start/end,
permission check start/end.

The intention is to enable performance tracing using 'perf'as well as
improving debugging.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:17 -04:00
Trond Myklebust
c8d74d9b68 NFSv4: Move the DNS resolver into the NFSv4 module
The other protocols don't use it, so make it local to NFSv4, and
remove the EXPORT.
Also ensure that we only compile in cache_lib.o if we're using
the legacy DNS resolver.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
2013-06-18 13:47:18 -04:00
Trond Myklebust
73e39aaa83 NFSv4.1: Cleanup move session slot management to fs/nfs/nfs4session.c
NFSv4.1 session management is getting complex enough to deserve
a separate file.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06 00:30:45 +01:00
bjschuma@gmail.com
1ae811ee27 NFS: Fix a regression when loading the NFS v4 module
Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias
pointing to nfs.ko, rather than nfs4.ko.  This can prevent the v4 module
from loading on mount, since the kernel sees that something named "nfs4"
has already been loaded.  To work around this, I've renamed the modules
to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko".

I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount
-t nfs4` still works.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-08-16 16:15:49 -04:00
Bryan Schumaker
89d77c8fa8 NFS: Convert v4 into a module
This patch exports symbols needed by the v4 module.  In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.

The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:52 -04:00
Bryan Schumaker
1c606fb74c NFS: Convert v3 into a module
This patch exports symbols and moves over the final structures needed by
the v3 module.  In addition, I also switch over to using IS_ENABLED() to
check if CONFIG_NFS_V3 or CONFIG_NFS_V3_MODULE are set.

The module (nfs3.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:46 -04:00
Bryan Schumaker
ddda8e0aa8 NFS: Convert v2 into a module
The module (nfs2.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v2.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:41 -04:00
Bryan Schumaker
1179acc6a3 NFS: Only initialize the ACL client in the v3 case
v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:05:54 -04:00
Bryan Schumaker
ab7017a3a0 NFS: Add version registering framework
This patch adds in the code to track multiple versions of the NFS
protocol.  I created default structures for v2, v3 and v4 so that each
version can continue to work while I convert them into kernel modules.
I also removed the const parameter from the rpc_version array so that I
can change it at runtime.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:04:17 -04:00
Bryan Schumaker
428360d77c NFS: Initialize the NFS v4 client from init_nfs_v4()
And split these functions out of the generic client into a v4 specific
file.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:33:52 -04:00
Bryan Schumaker
a38a9eac75 NFS: Move the v4 getroot code to nfs4getroot.c
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:33:51 -04:00
Bryan Schumaker
ce4ef7c0a8 NFS: Split out NFS v4 file operations
This patch moves the NFS v4 file functions into a new file that is only
compiled when CONFIG_NFS_V4 is enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:33:50 -04:00
Bryan Schumaker
466bfe7f4a NFS: Initialize v4 sysctls from nfs_init_v4()
And split them out of the generic client into their own file.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:33:18 -04:00
Bryan Schumaker
129d1977ed NFS: Create an init_nfs_v4() function
I want to initialize all of NFS v4 in a single function that will
eventually be used as the v4 module init function.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:33:13 -04:00
Bryan Schumaker
2ba68002a7 NFS: Make v2 configurable
With this patch NFS v2 can be disabled during Kconfig.  I default the
option to "y" to match the current behavior.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:42:22 -07:00
Fred Isaman
155e7524f2 pnfsblock: add blocklayout Kconfig option, Makefile, and stubs
Define a configuration variable to enable/disable compilation of the
block driver code.

Add the minimal structure for a pnfs block layout driver, and empty
list-heads that will hold the extent data

[pnfsblock: make NFS_V4_1 select PNFS_BLOCK]
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs-block: fix CONFIG_PNFS_BLOCK dependencies]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfs: move pnfs_layout_type inline in nfs_inode]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: layout alloc and free]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfs: move pnfs_layout_type inline in nfs_inode]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: define module alias]
Signed-off-by: Peng Tao <peng_tao@emc.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 12:18:15 -04:00
Benny Halevy
c93407d03c pnfs-obj: objlayoutdriver module skeleton
* Define the PNFS_OBJLAYOUT Kconfig option in the nfs
  master Kconfig file.
* Add the objlayout driver to the Kernel's Kbuild system.
* Add the fs/nfs/objlayout/Kbuild file for building the
  objlayoutdriver.ko driver
* Define fs/nfs/objlayout/objio_osd.c, register the driver on module
  initialization and unregister on exit.

[pnfs-obj: remove of CONFIG_PNFS fallout]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[added "unsure" clause]
[depend on NFS_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:52:35 +03:00
Benny Halevy
a1eaecbc4c NFSv4.1: make deviceid cache global
Move deviceid cache from the pnfs files layout driver to the
generic layer in preparation for the objects layout driver.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 12:09:48 +03:00
Andy Adamson
16b374ca43 NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
Implement the driver's io_ops->alloc_lseg and free_lseg functions,
which integrate into the deviceid cache and calls out to
nfs4_proc_getdeviceinfo when necessary.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:11 -04:00
Dean Hildebrand
7ab672ce31 NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
This driver just registers itself and supplies trivial mount/umount functions.

Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:10 -04:00
Ricardo Labiaga
85e174ba6b NFS: set layout driver
Put in the infrastructure that uses information returned from the
server at mount to select a layout driver module.

In this patch, a stub is used that always returns "no driver found".

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24 18:07:10 -04:00
Trond Myklebust
e571cbf1a4 NFS: Add a dns resolver for use with NFSv4 referrals and migration
The NFSv4 and NFSv4.1 protocols both allow for the redirection of a client
from one server to another in order to support filesystem migration and
replication. For full protocol support, we need to add the ability to
convert a DNS host name into an IP address that we can feed to the RPC
client.

We'll reuse the sunrpc cache, now that it has been converted to work with
rpc_pipefs.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-19 18:22:15 -04:00
David Howells
147272813e NFS: Define and create server-level objects
Define and create server-level cache index objects (as managed by nfs_client
structs).

Each server object is created in the NFS top-level index object and is itself
an index into which superblock-level objects are inserted.

Ideally there would be one superblock-level object per server, and the former
would be folded into the latter; however, since the "nosharecache" option
exists this isn't possible.

The server object key is a sequence consisting of:

 (1) NFS version

 (2) Server address family (eg: AF_INET or AF_INET6)

 (3) Server port.

 (4) Server IP address.

The key blob is of variable length, depending on the length of (4).

The server object is given no coherency data to carry in the auxiliary data
permitted by the cache.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:42 +01:00
David Howells
8ec442ae4c NFS: Register NFS for caching and retrieve the top-level index
Register NFS for caching and retrieve the top-level cache index object cookie.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:42 +01:00
Chuck Lever
ecfc555a83 NFS: Always enable NFS direct I/O
Since O_DIRECT is a standard feature that is enabled in most distros,
eliminate the CONFIG_NFS_DIRECTIO build option, and change the
fs/nfs/Makefile to always build in the NFS direct I/O engine.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19 18:00:34 -04:00
Christoph Hellwig
f8cf3678f4 [NFS] [PATCH] nfs: tiny makefile cleanup
no need to set up foo-objs these days.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09 17:15:36 -04:00
Chuck Lever
3ea97309e6 NFS: Remake nfsroot_mount as a permanent part of NFS client
In preparation for supporting NFSv2 and NFSv3 mount option handling in the
kernel NFS client, convert mount_clnt.c to be a permanent part of the NFS
client, instead of built only when CONFIG_ROOT_NFS is enabled.

In addition, we also replace the "struct sockaddr_in *" argument with
something more generic, to help support IPv6 at some later point.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:46 -04:00
David Howells
54ceac4515 NFS: Share NFS superblocks per-protocol per-server per-FSID
The attached patch makes NFS share superblocks between mounts from the same
server and FSID over the same protocol.

It does this by creating each superblock with a false root and returning the
real root dentry in the vfsmount presented by get_sb(). The root dentry set
starts off as an anonymous dentry if we don't already have the dentry for its
inode, otherwise it simply returns the dentry we already have.

We may thus end up with several trees of dentries in the superblock, and if at
some later point one of anonymous tree roots is discovered by normal filesystem
activity to be located in another tree within the superblock, the anonymous
root is named and materialises attached to the second tree at the appropriate
point.

Why do it this way? Why not pass an extra argument to the mount() syscall to
indicate the subpath and then pathwalk from the server root to the desired
directory? You can't guarantee this will work for two reasons:

 (1) The root and intervening nodes may not be accessible to the client.

     With NFS2 and NFS3, for instance, mountd is called on the server to get
     the filehandle for the tip of a path. mountd won't give us handles for
     anything we don't have permission to access, and so we can't set up NFS
     inodes for such nodes, and so can't easily set up dentries (we'd have to
     have ghost inodes or something).

     With this patch we don't actually create dentries until we get handles
     from the server that we can use to set up their inodes, and we don't
     actually bind them into the tree until we know for sure where they go.

 (2) Inaccessible symbolic links.

     If we're asked to mount two exports from the server, eg:

	mount warthog:/warthog/aaa/xxx /mmm
	mount warthog:/warthog/bbb/yyy /nnn

     We may not be able to access anything nearer the root than xxx and yyy,
     but we may find out later that /mmm/www/yyy, say, is actually the same
     directory as the one mounted on /nnn. What we might then find out, for
     example, is that /warthog/bbb was actually a symbolic link to
     /warthog/aaa/xxx/www, but we can't actually determine that by talking to
     the server until /warthog is made available by NFS.

     This would lead to having constructed an errneous dentry tree which we
     can't easily fix. We can end up with a dentry marked as a directory when
     it should actually be a symlink, or we could end up with an apparently
     hardlinked directory.

     With this patch we need not make assumptions about the type of a dentry
     for which we can't retrieve information, nor need we assume we know its
     place in the grand scheme of things until we actually see that place.

This patch reduces the possibility of aliasing in the inode and page caches for
inodes that may be accessed by more than one NFS export. It also reduces the
number of superblocks required for NFS where there are many NFS exports being
used from a server (home directory server + autofs for example).

This in turn makes it simpler to do local caching of network filesystems, as it
can then be guaranteed that there won't be links from multiple inodes in
separate superblocks to the same cache file.

Obviously, cache aliasing between different levels of NFS protocol could still
be a problem, but at least that gives us another key to use when indexing the
cache.

This patch makes the following changes:

 (1) The server record construction/destruction has been abstracted out into
     its own set of functions to make things easier to get right.  These have
     been moved into fs/nfs/client.c.

     All the code in fs/nfs/client.c has to do with the management of
     connections to servers, and doesn't touch superblocks in any way; the
     remaining code in fs/nfs/super.c has to do with VFS superblock management.

 (2) The sequence of events undertaken by NFS mount is now reordered:

     (a) A volume representation (struct nfs_server) is allocated.

     (b) A server representation (struct nfs_client) is acquired.  This may be
     	 allocated or shared, and is keyed on server address, port and NFS
     	 version.

     (c) If allocated, the client representation is initialised.  The state
     	 member variable of nfs_client is used to prevent a race during
     	 initialisation from two mounts.

     (d) For NFS4 a simple pathwalk is performed, walking from FH to FH to find
     	 the root filehandle for the mount (fs/nfs/getroot.c).  For NFS2/3 we
     	 are given the root FH in advance.

     (e) The volume FSID is probed for on the root FH.

     (f) The volume representation is initialised from the FSINFO record
     	 retrieved on the root FH.

     (g) sget() is called to acquire a superblock.  This may be allocated or
     	 shared, keyed on client pointer and FSID.

     (h) If allocated, the superblock is initialised.

     (i) If the superblock is shared, then the new nfs_server record is
     	 discarded.

     (j) The root dentry for this mount is looked up from the root FH.

     (k) The root dentry for this mount is assigned to the vfsmount.

 (3) nfs_readdir_lookup() creates dentries for each of the entries readdir()
     returns; this function now attaches disconnected trees from alternate
     roots that happen to be discovered attached to a directory being read (in
     the same way nfs_lookup() is made to do for lookup ops).

     The new d_materialise_unique() function is now used to do this, thus
     permitting the whole thing to be done under one set of locks, and thus
     avoiding any race between mount and lookup operations on the same
     directory.

 (4) The client management code uses a new debug facility: NFSDBG_CLIENT which
     is set by echoing 1024 to /proc/net/sunrpc/nfs_debug.

 (5) Clone mounts are now called xdev mounts.

 (6) Use the dentry passed to the statfs() op as the handle for retrieving fs
     statistics rather than the root dentry of the superblock (which is now a
     dummy).

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:37 -04:00
David Howells
24c8dbbb5f NFS: Generalise the nfs_client structure
Generalise the nfs_client structure by:

 (1) Moving nfs_client to a more general place (nfs_fs_sb.h).

 (2) Renaming its maintenance routines to be non-NFS4 specific.

 (3) Move those maintenance routines to a new non-NFS4 specific file (client.c)
     and move the declarations to internal.h.

 (4) Make nfs_find/get_client() take a full sockaddr_in to include the port
     number (will be required for NFS2/3).

 (5) Make nfs_find/get_client() take the NFS protocol version (again will be
     required to differentiate NFS2, 3 & 4 client records).

Also:

 (6) Make nfs_client construction proceed akin to inodes, marking them as under
     construction and providing a function to indicate completion.

 (7) Make nfs_get_client() wait interruptibly if it finds a client that it can
     share, but that client is currently being constructed.

 (8) Make nfs4_create_client() use (6) and (7) instead of locking cl_sem.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:33 -04:00
David Howells
f7b422b17e NFS: Split fs/nfs/inode.c
As fs/nfs/inode.c is rather large, heterogenous and unwieldy, the attached
patch splits it up into a number of files:

 (*) fs/nfs/inode.c

     Strictly inode specific functions.

 (*) fs/nfs/super.c

     Superblock management functions for NFS and NFS4, normal access, clones
     and referrals.  The NFS4 superblock functions _could_ move out into a
     separate conditionally compiled file, but it's probably not worth it as
     there're so many common bits.

 (*) fs/nfs/namespace.c

     Some namespace-specific functions have been moved here.

 (*) fs/nfs/nfs4namespace.c

     NFS4-specific namespace functions (this could be merged into the previous
     file).  This file is conditionally compiled.

 (*) fs/nfs/internal.h

     Inter-file declarations, plus a few simple utility functions moved from
     fs/nfs/inode.c.

     Additionally, all the in-.c-file externs have been moved here, and those
     files they were moved from now includes this file.

For the most part, the functions have not been changed, only some multiplexor
functions have changed significantly.

I've also:

 (*) Added some extra banner comments above some functions.

 (*) Rearranged the function order within the files to be more logical and
     better grouped (IMO), though someone may prefer a different order.

 (*) Reduced the number of #ifdefs in .c files.

 (*) Added missing __init and __exit directives.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-06-09 09:34:33 -04:00
Trond Myklebust
55a975937d NFS: Ensure the client submounts, when it crosses a server mountpoint.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-06-09 09:34:19 -04:00
Trond Myklebust
a72b44222d NFSv4: Allow user to set the port used by the NFSv4 callback channel
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:52 -05:00
Andreas Gruenbacher
b7fa0554cf [PATCH] NFS: Add support for NFSv3 ACLs
This adds acl support fo nfs clients via the NFSACL protocol extension, by
 implementing the getxattr, listxattr, setxattr, and removexattr iops for the
 system.posix_acl_access and system.posix_acl_default attributes.  This patch
 implements a dumb version that uses no caching (and thus adds some overhead).
 (Another patch in this patchset adds caching as well.)

 Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
 Acked-by: Olaf Kirch <okir@suse.de>
 Signed-off-by: Andrew Morton <akpm@osdl.org>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:24 -04:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00