- We now correctly allow soft limits to be exceeded, instead of always
returning -EDQUOT
- Disk quota grate times/warnings can now be set, not just the
systemwide defaults
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
local_clock() isn't always completely accurate - e.g. on machines with
TSC drift - but ktime_get_ns() overhead is too high, unfortunately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- In userspace, we don't have real percpu variables; this patch
disables the percpu freelists in userspace
- add some error messages for the asserts in
bch2_fs_btree_key_cache_exit(); we've been hitting this (only in
userspace, oddly), perhaps this will help us track down the error.
- bkey_cached_reuse() should likely be taking the key cache lock, and
it's a slowpath so it doesn't hurt to
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were forgetting to count down the number of nodes to prefetch, firing
off _way_ more than intended - whoops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We don't actually allocate memory under the btree key cache lock - so
there's no recursion concerns, and the shrinker can just use
mutex_lock().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On journal read, previously we would do full journal entry validation
immediately after reading a journal entry.
However, this would lead to errors for journal entries we weren't
actually going to use, either because they were too old or too new
(newer than the most recent flush).
We've observed write tearing on journal entries newer than the newest
flush - which makes sense, prior to a flush there's no guarantees about
write persistence.
This patch defers full journal entry validation until the end of the
journal read path, when we know which journal entries we'll want to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for the next patch, to defer journal entry validation: we now
track for each replica whether we had a good checksum.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This module provides a fast 64bit implementation of basic statistics
functions, including mean, variance and standard deviation in both
weighted and unweighted variants, the unweighted variant has a 32bit
limitation per sample to prevent overflow when squaring.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When modifying a file, we may be required to drop the suid/sgid bits -
we were missing a file_modified() call to do this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
An error case was jumping to the wrong label, creating an infinite loop
- oops.
This fixes fstests generic/648.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were removing 1 more entry than we were supposed to - oops.
Also some other simplifications and cleanups, and bring back the abort
preference code in a better fashion.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We already have support for the flag's semantics: inode options are
inherited by children if they were explicitly set on the parent. This
patch just maps the FS_XFLAG_PROJINHERIT flag to the "this option was
epxlicitly set" bit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is the right thing to do, and conforms with our own behaviour on
rename and xfs's behaviour on hardlink.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For compliance with other quota implementations, we should be
initializing quota information with a default 1 week timelimit: this
fixes fstests generic/235.
Also, this adds to_text() functions for some quota structs - useful
debugging aids.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree nodes can be written by other threads (shrinker, journal reclaim)
with only a read lock, but brand new nodes should only be written by the
thread doing the split/interior update. bch2_btree_update_add_new_node()
sets btree node flags to indicate that this is a new node and should not
be written out by other threads, thus we need to call it before dropping
our write lock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new helper, quota_reserve_range(), which takes a quota
reservation for unallocated blocks in a given file range, and uses it in
bch2_remap_file_range().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the drop_alloc tests, we may end up calling
bch2_btree_iter_peek_slot() on an interior level that doesn't exist.
Previously, this would hit the path->uptodate assertion in
bch2_btree_path_peek_slot(); this path first checks a NULL btree node,
which is how we know we're at the end of the btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree iterator code may allocate extra btree paths, temporarily,
that do not refer to keys being returned: we don't need to wait until
transaction restart to drop these, when they're not referenced they
should be deleted right away.
This fixes a transaction path overflow bug.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Negating without casting to a signed integer means the value wasn't
getting sign extended properly - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, bch2_btree_update_start() would always take all intent
locks, all the way up to the root.
We've finally got data from users where this became a scalability issue
- so, this patch fixes bch2_btree_update_start() to only take the locks
we need.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have an error path plumbed through, there's no need to be
using bch2_btree_node_lock_write_nofail().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The next patch in the series is (finally!) going to change btree splits
(and interior updates in general) to not take intent locks all the way
up to the root - instead only locking the nodes they'll need to modify.
However, this will be introducing a race since if we're not holding a
write lock on a btree node it can be written out by another thread, and
then we might not have enough space for a new bset entry.
We can handle this by retrying - we just need to introduce a new error
path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In order to avoid locking all btree nodes up to the root for btree node
splits, we're going to have to introduce a new error path into
bch2_btree_insert_node(); this mean we can't have done any writes or
modified global state before that point.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We'd like to prioritize aborting transactions that have done less work -
however, it appears breaking cycles by telling other threads to abort
may still be buggy, so disable that for now.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Some lock operations can't fail; a cycle of nofail locks is impossible
to recover from. So we want to get rid of these nofail locking
operations, but as this is tricky it'll be done incrementally.
If such a cycle happens, this patch prints out which codepaths are
involved so we know what to work on next.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cached pointers are generally dropped, not moved: this led to an
assertion firing in the data update path when there were no new replicas
being written.
This path adds a data_options field for pointers to be dropped, and
tweaks move_extent() to check if we're only dropping pointers, not
writing new ones, before kicking off a data update operation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When errors=panic, we want to make sure we print the error before
calling bch2_inconsistent_error().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_node_lock_nopath() is something we'd like to get rid of, it's
always prone to deadlocks if we accidentally are holding other locks,
because it doesn't mark the lock it's taking in a path: we'll want to
get rid of it in the future, but for now this patch works it by calling
bch2_trans_unlock().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This changes bch2_check_for_deadlock() to print the longest chains it
finds - when we have a deadlock because the cycle detector isn't finding
something, this will let us see what it's missing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were incorrectly returning -BCH_ERR_insufficient_devices when we'd
received a different error from bch2_bucket_alloc_trans(), which
(erronously) turns into -EROFS further up the call chain.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_delete_range_trans() was using btree_trans_too_many_iters()
to avoid path overflow, but this was buggy here (and also
btree_trans_too_many_iters() is suspect in general).
btree_trans_too_many_iters() only returns true when we're close to the
maximum number of paths - within 8 - but extent insert/delete assumes
that it can use more paths than that.
Instead, we need to call bch2_trans_begin() on every loop iteration.
Since we don't want to call bch2_trans_begin() (restarting the outer
transaction) if the call was a no-op - if we had no work to do - we have
to structure things a bit oddly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This refactoring puts our various allocation path counters into a
dedicated struct - the upcoming nocow patch is going to add another
counter.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There was a rare bug when path->locks_want was nonzero, but not
BTREE_MAX_DEPTH, where we'd return on a valid node that wasn't locked -
oops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This used to be needed more for buffered IO, but now the block layer has
writeback throttling - we can delete this now.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It now includes more info - whether the bucket was for metadata or data
- and also call it in the same place as the bucket_alloc_fail
tracepoint.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This function is fairly small and only used in two places: one very hot,
the other cold, so it should definitely be inlined.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This moves the slowpath of check_pos_snapshot_overwritten() to a
separate function, and inlines the fast path - helping performance on
btrees that don't use snapshot and for users that aren't using
snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, jset_validate() was formatting the initial part of an error
string for every entry it validating - expensive.
This moves that code to journal_entry_err_msg(), which is now only
called if there's an actual error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- move slowpath code to a separate function, btree_path_overflow()
- no need to use hweight64
- copy nr_max_paths from btree_transaction_stats to btree_trans,
avoiding a data dependency in the fast path
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
