Commit 30b8b0066c "init: Get rid of x86isms" broke the UP boot on
x86_64. That happens because CONFIG_UP_LATE_INIT depends on
CONFIG_X86_UP_APIC. X86_UP_APIC is a 32bit only config switch and
therefor not set on 64bit UP builds. As a consequence the UP init of
the local APIC and the IOAPIC is not called, which results in a boot
failure.
Make it depend on !SMP && X86_LOCAL_APIC instead.
Fixes: 30b8b0066c init: Get rid of x86isms
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that the APIC bringup is consolidated we can move the setup call
for the percpu clock event device to apic_bsp_setup().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211704.162567839@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Extend apic_bsp_setup() so the same code flow can be used for
APIC_init_uniprocessor().
Folded Jiangs fix to provide proper ordering of the UP setup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211704.084765674@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The UP related setups for local apic are mangled into smp_sanity_check().
That results in duplicate calls to disable_smp() and makes the code
hard to follow. Let smp_sanity_check() return dedicated values for the
various exit reasons and handle them at the call site.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.987833932@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We better provide proper functions which implement the required code
flow in the apic code rather than letting the smpboot code open code
it. That allows to make more functions static and confines the APIC
functionality to apic.c where it belongs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.907616730@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The UP local API support can be set up from an early initcall. No need
for horrible hackery in the init code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the code to a different place so we can make other functions
inline. Preparatory patch for further cleanups. No change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.731329006@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
smpboot is very creative with the ways to disable ioapic.
smpboot_clear_io_apic() smpboot_clear_io_apic_irqs() and
disable_ioapic_support() serve a similar purpose.
smpboot_clear_io_apic_irqs() is the most useless of all
functions as it clears a variable which has not been setup yet.
Aside of that it has the same ifdef mess and conditionals around the
ioapic related code, which can now be removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.650280684@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have proper stubs for the IOAPIC=n case and the setup/enable
function have the required checks inside now. Remove the ifdeffery and
the copy&pasted conditionals.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>C
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.569830549@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point to have the same checks at every call site. Add them to the
functions, so they can be called unconditionally.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.490719938@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To avoid lots of ifdeffery provide proper stubs for setup_IO_APIC(),
enable_IO_APIC() and setup_ioapic_dest().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.397170414@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point for a separate header file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.304126687@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the state information to simplify the disable logic further.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.209387598@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
enable_x2apic() is a convoluted unreadable mess because it is used for
both enablement in early boot and for setup in cpu_init().
Split the code into x2apic_enable() for enablement and x2apic_setup()
for setup of (secondary cpus). Make use of the new state tracking to
simplify the logic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.129287153@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is no point in postponing the hardware disablement of x2apic. It
can be disabled right away in the nox2apic setup function.
Disable it right away and set the state to DISABLED . This allows to
remove all the nox2apic conditionals all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.051214090@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Having 3 different variables to track the state is just silly and
error prone. Add a proper state tracking variable which covers the
three possible states: ON/OFF/DISABLED.
We cannot use x2apic_mode for this as this would require to change all
users of x2apic_mode with explicit comparisons for a state value
instead of treating it as boolean.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.955392443@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename the argument of try_to_enable_x2apic() so the purpose becomes
more clear.
Make the pr_warning more consistent and avoid the double print of
"disabling".
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.876012628@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point in having try_to_enable_x2apic() outside of the
CONFIG_X86_X2APIC section and having inline functions and more ifdefs
to deal with it. Move the code into the existing ifdef section and
remove the inline cruft.
Fixup the printk about not enabling interrupt remapping as suggested
by Boris.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.795388613@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point in delaying the x2apic detection for the CONFIG_X86_X2APIC=n
case to enable_IR_x2apic(). We rather detect that before we try to
setup anything there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.702479404@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If x2apic_preenabled is not enabled, then disable_x2apic() is not
called from various places which results in x2apic_disabled not being
set. So other code pathes can happily reenable the x2apic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.621431109@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The x2apic_preenabled flag is just a horrible hack and if X2APIC
support is disabled it does not reflect the actual hardware
state. Check the hardware instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.541280622@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Having several disjunct pieces of code for x2apic support makes
reading the code unnecessarily hard. Move it to one ifdeffed section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.445212133@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point in having a static variable around which is always 0. Let the
compiler optimize code out if disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.363274310@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
enable_IR_x2apic() grew a open coded x2apic detection. Implement a
proper helper function which shares the code with the already existing
x2apic_enabled().
Made it use rdmsrl_safe as suggested by Boris.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.285038186@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Simplify irq_remapping code by killing irq_remapping_supported() and
related interfaces.
Joerg posted a similar patch at https://lkml.org/lkml/2014/12/15/490,
so assume an signed-off from Joerg.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-14-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When interrupt remapping hardware is not in X2APIC, CPU X2APIC mode
will be disabled if:
1) Maximum CPU APIC ID is bigger than 255
2) hypervisior doesn't support x2apic mode.
But we should only check whether hypervisor supports X2APIC mode when
hypervisor(CONFIG_HYPERVISOR_GUEST) is enabled, otherwise X2APIC will
always be disabled when CONFIG_HYPERVISOR_GUEST is disabled and IR
doesn't work in X2APIC mode.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-12-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If remapping is in XAPIC mode, the setup code just skips X2APIC
initialization without checking max CPU APIC ID in system, which may
cause problem if system has a CPU with APIC ID bigger than 255.
Handle IR in XAPIC mode the same way as if remapping is disabled.
[ tglx: Split out from previous patch ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Refine enable_IR_x2apic() and related functions for better readability.
[ tglx: Removed the XAPIC mode change and split it out into a seperate
patch. Added comments. ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
X2APIC will be disabled if user specifies "nox2apic" on kernel command
line, even when x2apic_preenabled is true. So correctly detect X2APIC
status by using x2apic_enabled() instead of x2apic_preenabled.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-7-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Local variable x2apic_enabled has been assigned to but never referred,
so kill it.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-6-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When kernel doesn't support X2APIC but BIOS has enabled X2APIC, system
may panic or hang without useful messages. On the other hand, it's
hard to dynamically disable X2APIC when CONFIG_X86_X2APIC is disabled.
So panic with a clear message in such a case.
Now system panics as below when X2APIC is disabled and interrupt remapping
is enabled:
[ 0.316118] LAPIC pending interrupts after 512 EOI
[ 0.322126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.368655] Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC
[ 0.378300] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0+ #340
[ 0.385300] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0051.L05.1406240953 06/24/2014
[ 0.396997] ffff88046dc03000 ffff88046c307dd8 ffffffff8179dada 00000000000043f2
[ 0.405629] ffffffff81a92158 ffff88046c307e58 ffffffff8179b757 0000000000000002
[ 0.414261] 0000000000000008 ffff88046c307e68 ffff88046c307e08 ffffffff813ad82b
[ 0.422890] Call Trace:
[ 0.425711] [<ffffffff8179dada>] dump_stack+0x45/0x57
[ 0.431533] [<ffffffff8179b757>] panic+0xc1/0x1f5
[ 0.436978] [<ffffffff813ad82b>] ? delay_tsc+0x3b/0x70
[ 0.442910] [<ffffffff8166fa2c>] panic_if_irq_remap+0x1c/0x20
[ 0.449524] [<ffffffff81d73645>] setup_IO_APIC+0x405/0x82e
[ 0.464979] [<ffffffff81d6fcc2>] native_smp_prepare_cpus+0x2d9/0x31c
[ 0.472274] [<ffffffff81d5d0ac>] kernel_init_freeable+0xd6/0x223
[ 0.479170] [<ffffffff81792ad0>] ? rest_init+0x80/0x80
[ 0.485099] [<ffffffff81792ade>] kernel_init+0xe/0xf0
[ 0.490932] [<ffffffff817a537c>] ret_from_fork+0x7c/0xb0
[ 0.497054] [<ffffffff81792ad0>] ? rest_init+0x80/0x80
[ 0.502983] ---[ end Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC
System hangs as below when X2APIC and interrupt remapping are both disabled:
[ 1.102782] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 1.109351] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 1.115915] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 1.122479] pci 0000:00:03.3: System wakeup disabled by ACPI
[ 1.132274] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 1.137620] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 1.145239] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.151790] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 1.157128] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 1.164748] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 1.171447] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.178612] acpiphp: Slot [8] registered
[ 1.183095] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.188867] acpiphp: Slot [2] registered
With this patch applied, the system panics in both cases with a proper
panic message.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-5-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If x2apic got disabled on the kernel command line, then the following
issue can happen:
enable_IR_x2apic()
....
x2apic_mode = 1;
enable_x2apic();
if (x2apic_disabled) {
__disable_x2apic();
return;
}
That leaves X2APIC disabled in hardware, but x2apic_mode stays 1. So
all other code which checks x2apic_mode gets the wrong information.
Set x2apic_mode to 0 after disabling it in hardware.
This is just a hotfix. The proper solution is to rework this code so
it has seperate functions for the initial setup on the boot processor
and the secondary cpus, but that's beyond the scope of this fix.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
enable_IR_x2apic() calls setup_irq_remapping_ops() which by default
installs the intel dmar remapping ops and then calls the amd iommu irq
remapping prepare callback to figure out whether we are running on an
AMD machine with irq remapping hardware.
Right after that it calls irq_remapping_prepare() which pointlessly
checks:
if (!remap_ops || !remap_ops->prepare)
return -ENODEV;
and then calls
remap_ops->prepare()
which is silly in the AMD case as it got called from
setup_irq_remapping_ops() already a few microseconds ago.
Simplify this and just collapse everything into
irq_remapping_prepare().
The irq_remapping_prepare() remains still silly as it assigns blindly
the intel ops, but that's not scope of this patch.
The scope here is to move the preperatory work, i.e. memory
allocations out of the atomic section which is required to enable irq
remapping.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Acked-and-tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20141205084147.232633738@linutronix.de
Link: http://lkml.kernel.org/r/1420615903-28253-2-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull ARM fixes from Russell King:
"Three small fixes from over the Christmas period, and wiring up the
new execveat syscall for ARM"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error
ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region
ARM: 8249/1: mm: dump: don't skip regions
ARM: wire up execveat syscall
Pull x86 fixes from Ingo Molnar:
"Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix
with certain odd memory mappings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, vdso: Use asm volatile in __getcpu
x86/build: Clean auto-generated processor feature files
x86: Fix mkcapflags.sh bash-ism
x86: Fix step size adjustment during initial memory mapping
x86_64, vdso: Fix the vdso address randomization algorithm
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also some kernel side fixes: uncore PMU
driver fix, user regs sampling fix and an instruction decoder fix that
unbreaks PEBS precise sampling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
perf/x86_64: Improve user regs sampling
perf: Move task_pt_regs sampling into arch code
x86: Fix off-by-one in instruction decoder
perf hists browser: Fix segfault when showing callchain
perf callchain: Free callchains when hist entries are deleted
perf hists: Fix children sort key behavior
perf diff: Fix to sort by baseline field by default
perf list: Fix --raw-dump option
perf probe: Fix crash in dwarf_getcfi_elf
perf probe: Fix to fall back to find probe point in symbols
perf callchain: Append callchains only when requested
perf ui/tui: Print backtrace symbols when segfault occurs
perf report: Show progress bar for output resorting
- Fix early mapping fixmap corruption by EFI runtime services
- Fix __NR_compat_syscalls off-by-one
- Add missing sanity checks for some 32-bit registers
- Add some missing #includes which we get transitively
- Remove unused prepare_to_copy() macro
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJUrtR3AAoJELescNyEwWM0XgYH/jDzpjtSMOtHeoGtWmIhGxI6
aklb48kq/UlNpuvm2uu1dfaQRWkUD4HHTC9oKWqZ3HViquPxcrGYhHOGqEYlM5UG
V2iPpOyLJnIREq+jNJuStUkKk7MS9A5+5lMaxLXCrx62/aDejj2OEsJBv3XyMmg2
qi+86kecWkIRTDDTFJLYsRdgQC9CZe261obbctHbkaop+T2YBNWDPbe106jcH2HZ
DruBKFu982IVjKNSDkMTLkoK0bngZF6oMImwizgra+3yWuITt1KX+QlDcmo6Cz1X
xby+s7Z2TiyypCkXLWt++lvr5u42gDOUM4rR7uVwo7TnI1fvLYfAb52vRrQH/pY=
=BMQH
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here is a handful of minor arm64 fixes discovered and fixed over the
Christmas break. The main part is adding some missing #includes that
we seem to be getting transitively but have started causing problems
in -next.
- Fix early mapping fixmap corruption by EFI runtime services
- Fix __NR_compat_syscalls off-by-one
- Add missing sanity checks for some 32-bit registers
- Add some missing #includes which we get transitively
- Remove unused prepare_to_copy() macro"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/efi: add missing call to early_ioremap_reset()
arm64: fix missing asm/io.h include in kernel/smp_spin_table.c
arm64: fix missing asm/alternative.h include in kernel/module.c
arm64: fix missing linux/bug.h include in asm/arch_timer.h
arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h
arm64: sanity checks: add missing AArch32 registers
arm64: Remove unused prepare_to_copy()
arm64: Correct __NR_compat_syscalls for bpf
Merge misc fixes from Andrew Morton:
"12 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed
memcg: fix destination cgroup leak on task charges migration
mm: memcontrol: switch soft limit default back to infinity
mm/debug_pagealloc: remove obsolete Kconfig options
vfs: renumber FMODE_NONOTIFY and add to uniqueness check
arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h
ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file
MAINTAINERS: update rydberg's addresses
mm: protect set_page_dirty() from ongoing truncation
mm: prevent endless growth of anon_vma hierarchy
exit: fix race between wait_consider_task() and wait_task_zombie()
ocfs2: remove bogus check in dlm_process_recovery_data
In v3.19-rc3 tree when CONFIG_ARM_LPAE and CONFIG_DEBUG_RODATA are enabled
image failed to compile with the following error:
arch/arm/mm/init.c:661:14: error: ‘PMD_SECT_RDONLY’ undeclared here (not in a function)
It seems that '80d6b0c ARM: mm: allow text and rodata sections to be read-only'
and 'ded9477 ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE'
commits crossed. 80d6b0c uses PMD_SECT_RDONLY macro but ded9477 renames it
and uses software bits L_PMD_SECT_RDONLY instead.
Fix is to use L_PMD_SECT_RDONLY instead PMD_SECT_RDONLY as ded9477 does in
another places.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There was another report of a boot failure with a #GP fault in the
uncore SBOX initialization. The earlier work around was not enough
for this system.
The boot was failing while trying to initialize the third SBOX.
This patch detects parts with only two SBOXes and limits the number
of SBOX units to two there.
Stable material, as it affects boot problems on 3.18.
Tested-by: Andreas Oehler <andreas@oehler-net.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1420583675-9163-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Perf reports user regs for kernel-mode samples so that samples can
be backtraced through user code. The old code was very broken in
syscall context, resulting in useless backtraces.
The new code, in contrast, is still dangerously racy, but it should
at least work most of the time.
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: chenggang.qcg@taobao.com
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/243560c26ff0f739978e2459e203f6515367634d.1420396372.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86_64, at least, task_pt_regs may be only partially initialized
in many contexts, so x86_64 should not use it without extra care
from interrupt context, let alone NMI context.
This will allow x86_64 to override the logic and will supply some
scratch space to use to make a cleaner copy of user regs.
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: chenggang.qcg@taobao.com
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/e431cd4c18c2e1c44c774f10758527fb2d1025c4.1420396372.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane reported that the PEBS fixup was broken by the recent commit to
the instruction decoder. The thing had an off-by-one which resulted in
not being able to decode the last instruction and always bail.
Reported-by: Stephane Eranian <eranian@google.com>
Fixes: 6ba48ff46f ("x86: Remove arbitrary instruction size limit in instruction decoder")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # 3.18
Cc: <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Liang Kan <kan.liang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20141216104614.GV3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix ACPI power management intialization for device objects
corresponding to devices that are not present at the init time
(the _STA control method returns 0 for them) and therefore should
not be regarded as power manageable (Rafael J Wysocki).
- Rename a structure field and two functions used by the ACPI
processor driver to make them less tied to architectures that
use APICs (both x86 and ia64) and more suitable for ARM64
processors (Hanjun Guo).
- Add a disable_native_backlight quirk for Dell XPS15 L521X
designed in an unusual way preventing native backlight from
working on that machine (Hans de Goede).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=NEY0
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are an ACPI device power management initialization fix (-stable
material), two commits renaming stuff in the ACPI processor driver to
make it more suitable for ARM64 processors and a new ACPI backlight
blacklist entry.
Specifics:
- Fix ACPI power management intialization for device objects
corresponding to devices that are not present at the init time (the
_STA control method returns 0 for them) and therefore should not be
regarded as power manageable (Rafael J Wysocki).
- Rename a structure field and two functions used by the ACPI
processor driver to make them less tied to architectures that use
APICs (both x86 and ia64) and more suitable for ARM64 processors
(Hanjun Guo).
- Add a disable_native_backlight quirk for Dell XPS15 L521X designed
in an unusual way preventing native backlight from working on that
machine (Hans de Goede)"
* tag 'pm+acpi-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X
ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
ACPI / processor: Convert apic_id to phys_id to make it arch agnostic
ACPI / PM: Fix PM initialization for devices that are not present
Pull crypto fixes from Herbert Xu:
"This fixes a build problem with sha-mb with old toolchains and an
implementation bug in the ctr(aes)/by8 branch of aesni-intel that's
enabled when AVX is available"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha-mb - Add avx2_supported check.
crypto: aesni - fix "by8" variant for 128 bit keys
The early ioremap support introduced by patch bf4b558eba
("arm64: add early_ioremap support") failed to add a call to
early_ioremap_reset() at an appropriate time. Without this call,
invocations of early_ioremap etc. that are done too late will go
unnoticed and may cause corruption.
This is exactly what happened when the first user of this feature
was added in patch f84d02755f ("arm64: add EFI runtime services").
The early mapping of the EFI memory map is unmapped during an early
initcall, at which time the early ioremap support is long gone.
Fix by adding the missing call to early_ioremap_reset() to
setup_arch(), and move the offending early_memunmap() to right after
the point where the early mapping of the EFI memory map is last used.
Fixes: f84d02755f ("arm64: add EFI runtime services")
Cc: <stable@vger.kernel.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now local variables kernel_x_start and kernel_x_end defined using
'unsigned long' type which is wrong because they represent physical
memory range and will be calculated wrongly if LPAE is enabled.
As result, all following code in map_lowmem() will not work correctly.
For example, Keystone 2 boot is broken because
kernel_x_start == 0x0000 0000
kernel_x_end == 0x0080 0000
instead of
kernel_x_start == 0x0000 0008 0000 0000
kernel_x_end == 0x0000 0008 0080 0000
and as result whole low memory will be mapped with MT_MEMORY_RW
permissions by code (start > kernel_x_end):
} else if (start >= kernel_x_end) {
map.pfn = __phys_to_pfn(start);
map.virtual = __phys_to_virt(start);
map.length = end - start;
map.type = MT_MEMORY_RW;
create_mapping(&map);
}
Hence, fix it by using phys_addr_t type for variables kernel_x_start
and kernel_x_end.
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Currently the arm page table dumping code starts dumping page tables
from USER_PGTABLES_CEILING. This is unnecessary for skipping any entries
related to userspace as the swapper_pg_dir does not contain such
entries, and results in a couple of unfortuante side effects.
Firstly, any kernel mappings which might exist below
USER_PGTABLES_CEILING will not be accounted in the dump output. This
masks any entries erroneously created below this address.
Secondly, if the final page table entry walked is part of a valid
mapping the page table dumping code will not log the region this entry
is part of, as the final note_page call in walk_pgd will trigger an
early return when 0 < USER_PGTABLES_CEILING. Luckily this isn't seen on
contemporary systems as they typically don't have enough RAM to extend
the linear mapping right to the end of the address space.
Due to the way addr is constructed in the walk_* functions, it can never
be less than USER_PGTABLES_CEILING when walking the page tables, so it
is not necessary to avoid dereferencing invalid table addresses. The
existing checks for st->current_prot and st->marker[1].start_address are
sufficient to ensure we will not print and/or dereference garbage when
trying to log information.
This patch removes both problematic uses of USER_PGTABLES_CEILING from
the arm page table dumping code, preventing both of these issues. We
will now report any low mappings, and the final note_page call will not
return early, ensuring all regions are logged.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
