At the moment we cannot instantiate two dmaengine_pcms with the same
parent device, as the components will be named the same, leading to
conflicts.
Add 'name' field to the snd_dmaengine_pcm_config, and use that (if
defined) as the component name instead of deriving the component name
from the device.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://msgid.link/r/20240319-xilinx-dp-audio-v2-1-92d6d3a7ca7e@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When pcm_runtime is adding platform components it will scan all
registered components. In case of DPCM FE/BE some DAI links will
configure dummy platform. However both dummy codec and dummy platform
are using "snd-soc-dummy" as component->name. Dummy codec should be
skipped when adding platforms otherwise there'll be overflow and UBSAN
complains.
Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240305065606.3778642-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC machine driver can use snd_soc_{of_}get_dlc() (A) to get DAI name
for dlc (snd_soc_dai_link_component). In this function call
dlc->dai_name is parsed via snd_soc_dai_name_get() (B).
(A) int snd_soc_get_dlc(...)
{
...
(B) dlc->dai_name = snd_soc_dai_name_get(dai);
...
}
(B) has a priority to return dai->name as dlc->dai_name. In most cases
card can probe successfully. However it has an issue that ASoC tries to
rebind card. Here is a simplified flow for example:
| a) Card probes successfully at first
| b) One of the component bound to this card is removed for some
| reason the component->dev is released
| c) That component is re-registered
v d) ASoC calls snd_soc_try_rebind_card()
a) points dlc->dai_name to dai->name. b) releases all resource of the
old DAI. c) creates new DAI structure. In result d) can not use
dlc->dai_name to add new created DAI.
So it's reasonable that prefer to return dai->driver->name in
snd_soc_dai_name_get() because dai->driver is a pre-defined global
variable. Also update snd_soc_is_matching_dai() for alignment.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240304072128.2845432-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_is_matching_dai() checks DAI name, which is paired function
with snd_soc_dai_name_get().
It checks dlc->dai_name and dai->name (A) or dai->driver_name (B) or
dai->component->name (C)
static int snd_soc_is_matching_dai(...)
{
...
if (strcmp(dlc->dai_name, dai->name) == 0)
~~~~~~~~~~~~~ ^^^^^^^^^(A)
if (...
strcmp(dai->driver->name, dlc->dai_name) == 0)
(B)^^^^^^^^^^^^^^^^ ~~~~~~~~~~~~~
if (...
strcmp(dlc->dai_name, dai->component->name) == 0)
~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^(C)
...
}
But (B) part order is different with (A) and (C) (= ^^^^ and ~~~~).
This is not a big deal, but confusable to read. Fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87wmqxjbcg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify pointer to of_phandle_args in few function arguments, for code
safety and self-documenting code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240216145448.224185-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Many ASoC drivers define CPU/Codec/Platform dai_link by below macro.
SND_SOC_DAILINK_DEFS(link,
(A) DAILINK_COMP_ARRAY(COMP_CPU("cpu_dai")),
(B) DAILINK_COMP_ARRAY(COMP_CODEC("codec", "dai1"),
(B) COMP_CODEC("codec", "dai2")),
(C) DAILINK_COMP_ARRAY(COMP_EMPTY()));
In this case, this macro will be converted to like below
[o] = static struct snd_soc_dai_link_component
(A) [o] link_cpus[] = {{ .dai_name = "cpu_dai" }};
(B) [o] link_codecs[] = {{ .dai_name = "dai1", .name = "codec" },
{ .dai_name = "dai2", .name = "codec" }}
(C) [o] link_platforms[] = {{ }};
CPU and Codec info will be filled by COMP_CPU() / COMP_CODEC (= A,B),
and Platform will have empty data by COMP_EMPTY() (= C) in this case.
Platform empty info will be filled when driver probe()
(most of case, CPU info will be copied to use soc-generic-dmaengine-pcm).
For example in case of DPCM FE/BE, it will be like below.
Codec will be dummy Component / DAI in this case (X).
SND_SOC_DAILINK_DEFS(link,
DAILINK_COMP_ARRAY(COMP_CPU(...)),
(X) DAILINK_COMP_ARRAY(COMP_DUMMY()),
DAILINK_COMP_ARRAY(COMP_EMPTY()));
(X) part will converted like below
[o] link_codecs[] = {{ .name = "snd-soc-dummy",
.dai_name = "snd-soc-dummy-dai", }}
Even though we already have common asoc_dummy_dlc for dummy
Component / DAI, this macro will re-create new dummy dlc.
Some drivers defines many dai_link info via SND_SOC_DAILINK_DEFS(),
this means many dummy dlc also will be re-created. This is waste of
memory.
If we can use existing common asoc_dummy_dlc at (X),
we can avoid to re-creating dummy dlc, then, we can save the memory.
At that time, we want to keep existing code as much as possible, because
too many drivers are using this macro. But because of its original style,
using common asoc_dummy_dlc from it is very difficult or impossible.
So let's change the mind. The macro is used like below
SND_SOC_DAILINK_DEFS(link,
DAILINK_COMP_ARRAY(COMP_CPU(...)),
(x) DAILINK_COMP_ARRAY(COMP_DUMMY()),
DAILINK_COMP_ARRAY(COMP_EMPTY()));
static struct snd_soc_dai_link dai_links[] = {
{
.name = ...,
.stream_name = ...,
(y) SND_SOC_DAILINK_REG(link),
},
(y) part will be like below
static struct snd_soc_dai_link dai_links[] = {
{
.name = ...,
.stream_name = ...,
^ ...
| .codecs = link_codecs,
(y) .num_codecs = ARRAY_SIZE(link_codecs),
v ...
}
This patch try to use trick on COMP_DUMMY()
- #define COMP_DUMMY() { .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", }
+ #define COMP_DUMMY()
By this tric, (x) part will be like below.
before
[o] link_codecs[] = {{ .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", }}
after
[o] link_codecs[] = { };
This is same as below
[o] link_codecs[0];
This means it has pointer (link_codecs), but the array size is 0.
(y) part will be like below.
static struct snd_soc_dai_link dai_links[] = {
{
...
.codecs = link_codecs,
.num_codecs = 0,
...
},
This is very special settings that normal use usually not do,
but new macro do.
We can find this special settings on soc-core.c and fill it as
"dummy DAI" (= asoc_dummy_dlc). By this tric, we can avoid to re-create
dummy dlc and save the memory.
This patch add tric at COMP_DUMMY() and add snd_soc_fill_dummy_dai()
to fill dummy DAI.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/871qbi93qu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC CPU:Codec = N:M connection is using connection mapping idea,
but it is used for N < M case only. We want to use it for any case.
By this patch, not only N:M connection, but all existing connection
(1:1, 1:N, N:N) will use same connection mapping. Then, because it will
use default mapping, no conversion patch is needed to exising drivers.
More over, CPU:Codec = N:M (N > M) also supported in the same time.
ch_maps array will has CPU/Codec index by this patch.
Image
CPU0 <---> Codec0
CPU1 <-+-> Codec1
CPU2 <-/
ch_map
ch_map[0].cpu = 0 ch_map[0].codec = 0
ch_map[1].cpu = 1 ch_map[1].codec = 1
ch_map[2].cpu = 2 ch_map[2].codec = 1
Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/87ttpq4f2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On init we have sequence:
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_pcm_runtime(card, dai_link);
ret = init_some_other_things(...);
if (ret)
goto probe_end:
for_each_card_rtds(card, rtd) {
ret = soc_init_pcm_runtime(card, rtd);
probe_end:
while on exit:
for_each_card_rtds(card, rtd)
snd_soc_link_exit(rtd);
If init_some_other_things() step fails due to error we end up with
not fully setup rtds and try to call snd_soc_link_exit on them, which
depending on contents on .link_exit handler, can end up dereferencing
NULL pointer.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929103243.705433-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When printing log related to component it is useful to know, to which
component it applies to.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929103243.705433-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87msxsp8tp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent cleanup of soc_dai_link_sanity_check() is responsible for
generating lots of confusing errors before returning -EPROBE_DEFER:
acp5x_mach acp5x_mach.0: ASoC: Component acp5x_i2s_dma.0 not found for link acp5x-8821-play
[...]
acp5x_mach acp5x_mach.0: ASoC: Component spi-VLV1776:00 not found for link acp5x-CS35L41-Stereo
[...]
acp5x_mach acp5x_mach.0: ASoC: Component spi-VLV1776:01 not found for link acp5x-CS35L41-Stereo
Switch back to the initial behaviour of logging those messages on
KERN_DEBUG level instead of KERN_ERR.
While at it, use the correct form of the verb in 'component_not_find'
label.
Fixes: 0e66a2c694 ("ASoC: soc-core.c: cleanup soc_dai_link_sanity_check()")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com
Link: https://lore.kernel.org/r/20230824193837.369761-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
snd_soc_dai_driver has .ops for call back functions (A), but it also
has other call back functions (B). It is duplicated and confusable.
struct snd_soc_dai_driver {
...
^ int (*probe)(...);
| int (*remove)(...);
(B) int (*compress_new)(...);
| int (*pcm_new)(...);
v ...
(A) const struct snd_soc_dai_ops *ops;
...
}
This patch merges (B) into (A).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8dpb0w6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To use multi Component support, we need to check dai_args whether
Card could get DAI from args (CPU/Codec needs set dai_args on DAI driver).
If it could, we need to allocate dai_args for dlc.
This patch adds snd_soc_copy_dai_args() for it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkgko94e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_is_matching_component() checks "of_node" or "dai_args".
Thus coping "of_node" only is not enough to use CPU as Platform.
This patch adds snd_soc_dlc_use_cpu_as_platform() and help it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cz10o94k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To enable multi Component, Card driver need to get DAI via dai_args
to identify it. This patch adds snd_soc_get_dai_via_args() for it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edlgo94p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC Card is using dlc (snd_soc_dai_link_component) to find
target DAI / Component to be used.
Current dlc has below 3 items to identify DAI / Component
(a) name for Component
(b) of_node for Component
(c) dai_name for DAI
(a) or (b) is used to identify target Component, and (c) is used
to identify DAI.
One of the biggest issue on it today is dlc needs "name matching"
for "dai_name" (c).
It was not a big deal when we were using platform_device, because we
could specify nessesary "dai_name" via its platform_data.
But we need to find DAI name pointer from whole registered datas and/or
each related driver somehow in case of DT, because we can't specify it.
Therefore, Card driver parses DT and assumes the DAI, and find its name
pointer. How to assume is based on each Component and/or Card.
Next biggest issue is Component node (a)/(b).
Basically, Component is registered when CPU/Codec driver was
probed() (X). Here, 1 Component is possible to have some DAIs.
int xxx_probe(struct platform_device *pdev)
{
...
(X) ret = devm_snd_soc_register_component(pdev->dev,
&component_driver,
&dai_driver, dai_driver_num);
...
}
The image of each data will be like below.
One note here is "driver" is included for later explanation.
+-driver------+
|+-component-+|
|| dai0||
|| dai1||
|| ...||
|+-----------+|
+-------------+
The point here is 1 driver has 1 Component, because basically driver
calles snd_soc_register_component() (= X) once.
Here is the very basic CPU/Codec connection image.
HW image SW image
+-- Board ------------+ +-card--------------------------+
|+-----+ +------+| |+-driver------+ +-driver------+|
|| CPU | <--> |CodecA|| ||+-component-+| |+-component-+||
|+-----+ +------+| ||| dai|<=>|dai |||
+---------------------+ ||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It will be very complex if it has multi DAIs.
Here is intuitive easy to understandable HW / SW example.
HW image SW image
+-- Board ---------------+ +-card--------------------------+
|+--------+ +------+| |+-driver------+ +-driver------+|
|| CPU ch0| <--> |CodecA|| ||+-component-+| |+-component-+||
|| | +------+| ||| ch0 dai|<=>|dai |||
|| | +------+| ||| || |+-----------+||
|| ch1| <--> |CodecB|| ||| || +-------------+|
|+--------+ +------+| ||| || +-driver------+|
+------------------------+ ||| || |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It will be handled as multi interface as "one Card".
card0,0: CPU-ch0 - CodecA
card0,1: CPU-ch1 - CodecB
^
But, here is the HW image example which will be more complex
+-- Basic Board ---------+
|+--------+ +------+|
|| CPU ch0| <--> |CodecA||
|| ch1| <-+ +------+|
|+--------+ | |
+-------------|----------+
+-- expansion board -----+
| | +------+|
| +->|CodecB||
| +------+|
+------------------------+
We intuitively think we want to handle these as "2 Sound Cards".
card0,0: CPU-ch0 - CodecA
card1,0: CPU-ch1 - CodecB
^
But below image which we can register today doesn't allow it,
because the same Component will be connected to both Card0/1,
but it will be rejected by (Z).
+-driver------+
|+-component-+|
+-card0-------------------------+
||| || +-driver------+|
||| || |+-component-+||
||| ch0 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
+-------------------------------+
|| ||
+-card1-------------------------+
||| || +-driver------+|
||| || |+-component-+||
||| ch1 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
+-------------------------------+
|+-----------+|
+-------------+
static int soc_probe_component()
{
...
if (component->card) {
(Z) if (component->card != card) {
dev_err(component->dev, ...);
return -ENODEV;
}
return 0;
}
...
}
So, how about to call snd_soc_register_component() (= X) multiple times
on probe() to avoid buplicated component->card limitation, to be like
below ?
+-driver------+
+-card0-------------------------+
|| | +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||+-----------+| |+-----------+||
|| | +-------------+|
+-------------------------------+
| |
+-card1-------------------------+
|| | +-driver------+|
||+-component-+| |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|| | +-------------+|
+-------------------------------+
+-------------+
Yes, looks good. But unfortunately it doesn't help us for now.
Let's see soc_component_to_node() and snd_soc_is_matching_component()
static struct device_node
*soc_component_to_node(struct snd_soc_component *component)
{
...
(A) of_node = component->dev->of_node;
...
}
static int snd_soc_is_matching_component(...)
{
...
(B) if (dlc->of_node && component_of_node != dlc->of_node)
...
}
dlc checkes "of_node" to identify target component (B),
but this "of_node" came from component->dev (A) which is added
by snd_soc_register_component() (X) on probe().
This means we can have different "component->card", but have same
"component->dev" in this case.
Even though we calls snd_soc_register_component() (= X) multiple times,
all Components have same driver's dev, thus it is impossible to
identified the Component.
And if it was impossible to identify Component, it is impossible to
identify DAI on current implementation.
So, how to handle above complex HW image today is 2 patterns.
One is handles it as "1 big sound card".
The SW image is like below.
SW image
+-card--------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
||| || +-driver------+|
||| || |+-component-+||
||| ch1 dai|<->|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
But the problem is not intuitive.
We want to handle it as "2 Cards".
2nd pattern is like below.
SW image
+-card0-------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
+-card1-------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It handles as "2 Cards", but CPU part needs to be probed as 2 drivers.
It is also not intuitive.
To solve this issue, we need to have multi Component support.
In current implementation, we need to identify Component first
to identify DAI, and it is using name matching to identify DAI.
But how about to be enable to directly identify DAI by unique way
instead of name matching ? In such case, we can directly identify DAI,
then it can identify Component from DAI.
For example Simple-Card / Audio-Graph-Card case, it is specifying DAI
via its node.
Simple-Card
sound-dai = <&cpu-sound>;
Audio-Graph-Card
dais = <&cpu-sound>;
If each CPU/Codec driver keeps this property when probing,
we can identify DAI directly from Card.
Being able to identify DAI directly means being able to identify its
Component as well even though Component has same dev (= B).
This patch adds new "dai_node" for it.
To keeping compatibility, it checks "dai_node" first if it has,
otherwise, use existing method (name matching).
Link: https://lore.kernel.org/r/87fskz5yrr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs5wo94v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is specifying and checking DAI name.
But where it came from and how to check was ambiguous.
This patch adds snd_soc_dai_name_get() / snd_soc_dlc_dai_is_match()
and makes it clear.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6qco952.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dlc->of_node will be set on snd_soc_get_dlc(), but we want
1) protect it by mutex, 2) set only when successed.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rc1kerv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Required CPU/Codec/Platform dlc (snd_soc_dai_link_component) are similar
but not same, and very complex. Current implementation is very confusable
and it will be more complex if multi Component was supported.
This patch cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7l9blsn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_get_dai_id() is initializing dlc *manually*,
but it will might be a problem if dlc had new extra parameter.
This patch uses default initialization, otherwise, non initialized
part will be strange value.
This is prepare for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pm5pblst.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Suppress probe deferral error messages when probing link components to
avoid spamming the logs, for example, if a required component has not
yet been registered:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
Note that dev_err_probe() is not used as the card can be unbound and
rebound while the underlying platform device remains bound to its
driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230705123018.30903-9-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The generic snd_soc_dai_get_dlc() contains a default translation function
for DAI names which has factored out common code in a number of card
drivers, resolving the dai_name and of_node either using a driver provided
translation function or with a generic implementation. Unfortunately the
of_node can't be set by the translation function since it currently doesn't
have an interface to do that but snd_soc_dai_get_dlc() only initialises the
of_node in the case where there is no translation function.
This breaks the Meson support after conversion to use the generic helpers
since the DPCM cards for it check which component of the SoC is connected
to each link by checking the compatible for the component and the Meson
components provide a custom operation so don't use the generic code.
Fix this and potentially other cards by unconditionally storing the node in
the dai_link_component, there shouldn't be a binding specific of_node
selected since that's how we determine the translation function.
Fixes: 2e1dbea1f8 ("ASoC: meson: use snd_soc_{of_}get_dlc()")
Fixes: 3c8b586185 ("ASoC: soc-core.c: add index on snd_soc_of_get_dai_name()")
Link: https://lore.kernel.org/r/Message-Id: <20230623-asoc-fix-meson-probe-v1-1-82b2c2ec5ca4@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_{of_}get_dai_name() to get DAI name
for dlc (snd_soc_dai_link_component).
But we now can use snd_soc_{of_}get_dlc() for it. Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6r2dgmi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_of_get_dai_name() doesn't accept index
for #sound-dai-cells. It is not useful for user.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pm5qdgng.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-core.c has snd_soc_{of_}get_dai_name() to get DAI name
for dlc (snd_soc_dai_link_component). It gets .dai_name, but we need
.of_node too. Therefor user need to arrange.
It will be more useful if it gets both .dai_name and .of_node.
This patch adds snd_soc_{of_}get_dlc() for it, and existing functions
uses it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0q6dgnm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using get_stream_cpu() to get CPU stream which cares
Codec2Codec. But it is static function for now, and we want to use it
from other files. This patch makes it global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs7cj9mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC need to use card->mutex with _INIT or _RUNTIME,
but there is no helper function for it.
This patch adds its helper function and use it.
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_card_mutex_lock_root() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a5zlx3tw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has snd_soc_dpcm_mutex_lock/unlock(),
but other files can't use it because it is static function.
It requests snd_soc_pcm_runtime as parameter (A), but sometimes we
want to use it by snd_soc_card (B).
(A) static inline void snd_soc_dpcm_mutex_lock(struct snd_soc_pcm_runtime *rtd)
{
mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
} ^^^^^^^^^
(B) mutex_lock_nested(&card->pcm_mutex, card->pcm_subclass);
^^^^
We want to use it with both "rtd" and "card" for dapm lock/unlock.
To enable it, this patch uses _Generic macro.
This patch makes snd_soc_dpcm_mutex_{un}lock() global function, and use it on
each files.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkk1x3ud.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC supports snd_soc_add_pcm_runtime(), but user need to
call it one-by-one if it has multi dai_links.
This patch adds snd_soc_add_pcm_runtimes() which supports multi
dai_links.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6u76nhq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c is using dev_dbg(), but some of them are useless.
It indicates many dev_dbg() at snd_soc_runtime_get_dai_fmt(),
but all of them are just noise, almost no meanings.
dev_dbg() on soc_probe_link_dais() indicates dai link and its
loop order, but it is just noise, no information.
dev_dbg() on snd_soc_register_dai() is duplicated.
This patch cleanup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttyy64cy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has many helper function.
This patch use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87k013ea2u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Flows leading to link->init() and link->exit() are not symmetric.
Currently the relevant part of card probe sequence goes as:
for_each_card_rtds(card, rtd)
for_each_rtd_components(rtd, i, component)
component->probe()
for_each_card_rtds(card, rtd)
for_each_rtd_dais(rtd, i, dai)
dai->probe()
for_each_card_rtds(card, rtd)
rtd->init()
On the other side, equivalent remove sequence goes as:
for_each_card_rtds(card, rtd)
for_each_rtd_dais(rtd, i, dai)
dai->remove()
for_each_card_rtds(card, rtd)
for_each_rtd_components(rtd, i, component)
component->remove()
for_each_card_rtds(card, rtd)
rtd->exit()
what can lead to errors as link->exit() may still operate on resources
owned by its components despite the probability of them being freed
during the component->remove().
This change modifies the remove sequence to:
for_each_card_rtds(card, rtd)
rtd->exit()
for_each_card_rtds(card, rtd)
for_each_rtd_dais(rtd, i, dai)
dai->remove()
for_each_card_rtds(card, rtd)
for_each_rtd_components(rtd, i, component)
component->remove()
so code found in link->exit() is safe to touch any component stuff as
component->remove() has not been called yet.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221027085840.1562698-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The actual space for struct snd_soc_component has been allocated by
snd_soc_register_component, here rtd's components are pointers to
components, I replace the base size from *component to component.
Signed-off-by: lishqchn <lishqchn@qq.com>
Link: https://lore.kernel.org/r/tencent_59850BB028662B6F2D49D7F3624AB84CCF05@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KASAN reports a use-after-free:
BUG: KASAN: use-after-free in device_del+0xb5b/0xc60
Read of size 8 at addr ffff888008655050 by task rmmod/387
CPU: 2 PID: 387 Comm: rmmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl+0x79/0x9a
print_report+0x17f/0x47b
kasan_report+0xbb/0xf0
device_del+0xb5b/0xc60
platform_device_del.part.0+0x24/0x200
platform_device_unregister+0x2e/0x40
snd_soc_exit+0xa/0x22 [snd_soc_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
</TASK>
It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail,
but its ret is ignored, which makes soc_dummy_dev unregistered twice.
snd_soc_init()
snd_soc_util_init()
platform_device_register_simple(soc_dummy_dev)
platform_driver_register() # fail
platform_device_unregister(soc_dummy_dev)
platform_driver_register() # success
...
snd_soc_exit()
snd_soc_util_exit()
# soc_dummy_dev will be unregistered for second time
To fix it, handle error and stop snd_soc_init() when util_init() fail.
Also clean debugfs when util_init() or driver_register() fail.
Fixes: fb257897bf ("ASoC: Work around allmodconfig failure")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221028031603.59416-1-chenzhongjin@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver field in the struct snd_ctl_card_info is a valid
user space identifier. Actually, many ASoC drivers do not care
and let to initialize this field using a standard wrapping method.
Unfortunately, in this way, this field becomes unusable and
unreadable for the drivers with longer card names. Also,
there is a possibility to have clashes (driver field has
only limit of 15 characters).
This change will print an error when the wrapping is used.
The developers of the affected drivers should fix the problem.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd has both dai_link pointer (A) and num_cpus/codecs (B).
(A) rtd->dai_link = dai_link;
(B) rtd->num_cpus = dai_link->num_cpus;
(B) rtd->num_codecs = dai_link->num_codecs;
But, we can get num_cpus/codecs (B) via dai_link (A).
This means we don't need to keep num_cpus/codecs on rtd.
This patch removes these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfkmv9n3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Almost all default rtd->xxx are setup at soc_new_pcm_runtime()
which is sub-function of snd_soc_add_pcm_runtime() (A).
But "rtd->pmdown_time" is setup at soc_init_pcm_runtime() (B).
It is very random timing setup. This patch setup it at (A),
same as other rtd->xxx.
static int snd_soc_bind_card(...)
{
...
for_each_card_prelinks(...) {
(A) ret = snd_soc_add_pcm_runtime(...);
...
}
...
for_each_card_rtds(...) {
(B) ret = soc_init_pcm_runtime(...);
...
}
...
}
One note is that current topology/intel are directly calling
snd_soc_add_pcm_runtime() (A) without calling soc_init_pcm_runtime() (B).
This means, its "rtd->pmdown_time settings" was 0, but will have default
value by this patch.
"rtd->pmdown_time settings" will be used at
snd_soc_runtime_ignore_pmdown_time(). This patch adds
"ignore_pmdown_time" to these driver to keep compatibility.
bool snd_soc_runtime_ignore_pmdown_time(...)
{
...
=> if (!rtd->pmdown_time || rtd->dai_link->ignore_pmdown_time)
return true;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yhxmjjd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces the sprintf()
usage straightforwardly with a new helper, sysfs_emit().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801170108.26340-7-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC has snd_soc_of_get_dai_link_cpus/codecs(), and these are almost same
code. The main difference are below.
for_each_link_cpus() dai_link->cpus dai_link->num_cpus
for_each_link_codecs() dai_link->codecs dai_link->num_codecs
Because we need to use these parameters, we can't share full-code for now,
but can share some codes.
This patch adds __snd_soc_of_get/put_xxx() functions, and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1xpp7ju.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 900dedd7e4 ("ASoC: Introduce snd_soc_of_get_dai_link_cpus")
adds new snd_soc_of_get_dai_link_cpus(), but it is using
"codec" everywhere. It is very strange, and is issue when error case.
It should call cpu instead of codec in error case.
This patch tidyup it.
Fixes: 900dedd7e4 ("ASoC: Introduce snd_soc_of_get_dai_link_cpus")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/87zgi5p7k1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now all the drivers are updated to have the new legacy_dai_naming
flag, update the core code so it also uses the new flag. Paving
the way for the old non_legacy_dai_naming flag to be removed.
It should be noted this patch will affect the CODEC drivers that don't
specify the non_legacy_dai_naming flag. These drivers will update from
using legacy DAI naming to the new scheme after this patch, this is
being considered a fix as the intention was for all CODEC drivers to use
the new scheme and all existing CODEC drivers were updated to do so
before componentisation. This just corrects those devices that have
snuck in since componentisation. The corrected devices are as
follows:
adau1372, cros_ec_codec, cs35l41, cs35l45, cx2072x, hdac_hda,
jz4725/60/70, lpass-rx/tx/va/wsa-macro, max98504, max9877,
mt6351/58/59, mt6660, pcm3060, rk3328, rt1308/16, rt5514,
rt5677, rt700/11/15, rt9120, sdw-mockup, tlv320adc3xxx, tscs454,
wcd9335/4x/8x, wsa881x
Some of these devices are used in some in kernel machine drivers,
however it appears all the usages use the actual DAI driver name
(since snd_soc_find_dai checks both the DAI name and the DAI driver
name). So it is not believed this change will break any in tree
machine drivers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-35-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function snd_soc_unregister_card() returned 0 unconditionally and most
callers don't care to check the return value. Make it return void and
adapt the callers that didn't ignore the return value before.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220621145834.198519-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The new method is called just before the card is registered, providing
an opportune time for machine-level drivers to do some final controls
amending: deactivating individual controls or obtaining control
references for later use.
Some controls can be created by DAPM after 'late_probe' has been called,
hence the need for this new method.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220606191910.16580-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All CPU drivers are now updated to accept a direct indication of
whether they are clock provider or consumer, rather than being told
if the CODEC is clock provider. As such update the core to always
pass this direct indication rather than only if the new set_fmt_new
callback is defined. Note this makes no difference to the CODEC
side of the DAI link as it was already being directly told if it
was clock provider under the old system.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-29-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original set_fmt callback always passes clock provider/consumer
with respect to the CODEC. This made sense when the framework was
directly broken down into platforms and CODECs. Now everything is
componentised it simplifies things if each side of the link is
just told if it is provider or consumer of the clocks. To start
this migration add a new callback that can be used to receive a
direct specification of clocking. As there are more CODEC drivers
than platform drivers, we make the new flags identical to the old
CODEC flags meaning CODEC drivers will not require an update.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
