This reverts commit 8e0ef41286.
It's broken, and causes the boot to fail on encrypted volumes.
Reported-and-bisected-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/20240311235023.GA1205@cmpxchg.org/
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use queue_limits_set which validates the limits and takes care of
updating the readahead settings instead of directly assigning them to
the queue. For that make sure all limits are actually updated before
the assignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240228225653.947152-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kvmalloc function fails with a warning if the size is larger than
INT_MAX. The warning was triggered by a syscall testing robot.
In order to avoid the warning, this commit limits the number of targets to
1048576 and the size of the parameter area to 1073741824.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
When zones were first added the SCSI and ATA specs, two different
models were supported (in addition to the drive managed one that
is invisible to the host):
- host managed where non-conventional zones there is strict requirement
to write at the write pointer, or else an error is returned
- host aware where a write point is maintained if writes always happen
at it, otherwise it is left in an under-defined state and the
sequential write preferred zones behave like conventional zones
(probably very badly performing ones, though)
Not surprisingly this lukewarm model didn't prove to be very useful and
was finally removed from the ZBC and SBC specs (NVMe never implemented
it). Due to to the easily disappearing write pointer host software
could never rely on the write pointer to actually be useful for say
recovery.
Fortunately only a few HDD prototypes shipped using this model which
never made it to mass production. Drop the support before it is too
late. Note that any such host aware prototype HDD can still be used
with Linux as we'll now treat it as a conventional HDD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dm-error is used in several test cases in the xfstests test suite to
check the handling of IO errors in file systems. However, with several
file systems getting native support for zoned block devices (e.g.
btrfs and f2fs), dm-error's lack of zoned block device support creates
problems as the file system attempts executing zone commands (e.g. a
zone append operation) against a dm-error non-zoned block device,
which causes various issues in the block layer (e.g. WARN_ON
triggers).
This commit adds supports for zoned block devices to dm-error, allowing
a DM device table containing an error target to be exposed as a zoned
block device (if all targets have a compatible zoned model support and
mapping). This is done as follows:
1) Allow passing 2 arguments to an error target, similar to dm-linear:
a backing device and a start sector. These arguments are optional and
dm-error retains its characteristics if the arguments are not
specified.
2) Implement the iterate_devices method so that dm-core can normally
check the zone support and restrictions (e.g. zone alignment of the
targets). When the backing device arguments are not specified, the
iterate_devices method never calls the fn() argument.
When no backing device is specified, as before, we assume that the DM
device is not zoned. When the backing device arguments are specified,
the zoned model of the DM device will depend on the backing device
type:
- If the backing device is zoned and its model and mapping is
compatible with other targets of the device, the resulting device
will be zoned, with the dm-error mapped portion always returning
errors (similar to the default non-zoned case).
- If the backing device is not zoned, then the DM device will not be
either.
This zone support for dm-error requires the definition of a functional
report_zones operation so that dm_revalidate_zones() can operate
correctly and resources for emulating zone append operations
initialized. This is necessary for cases where dm-error is used to
partially map a device and have an overall correct handling of zone
append. This means that dm-error does not fail report zones operations.
Two changes that are not obvious are included to avoid issues:
1) dm_table_supports_zoned_model() is changed to directly check if
the backing device of a wildcard target (= dm-error target) is
zoned. Otherwise, we wouldn't be able to catch the invalid setup of
dm-error without a backing device (non zoned case) being combined
with zoned targets.
2) dm_table_supports_dax() is modified to return false if the wildcard
target is found. Otherwise, when dm-error is set without a backing
device, we end up with a NULL pointer dereference in
set_dax_synchronous (dax_dev is NULL). This is consistent with the
current behavior because dm_table_supports_dax() always returned
false for targets that do not define the iterate_devices method.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
There's a race condition in the multipath target when retrieve_deps
races with multipath_message calling dm_get_device and dm_put_device.
retrieve_deps walks the list of open devices without holding any lock
but multipath may add or remove devices to the list while it is
running. The end result may be memory corruption or use-after-free
memory access.
See this description of a UAF with multipath_message():
https://listman.redhat.com/archives/dm-devel/2022-October/052373.html
Fix this bug by introducing a new rw semaphore "devices_lock". We grab
devices_lock for read in retrieve_deps and we grab it for write in
dm_get_device and dm_put_device.
Reported-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
early_lookup_bdev is supposed to only be called from the early boot
code, but dm_get_device calls it as a general fallback when lookup_bdev
fails, which is problematic because early_lookup_bdev bypasses all normal
path based permission checking, and might cause problems with certain
container environments renaming devices.
Switch to only call early_lookup_bdev when dm is built-in and the system
state in not running yet. This means it is still available when tables
are constructed by dm-init.c from the kernel command line, but not
otherwise.
Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems. They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again. But if
avoidable in any way I'd rather avoid that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Open code dm_get_dev_t in the only remaining caller, and propagate the
exact error code from lookup_bdev and early_lookup_bdev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
name_to_dev_t has a very misleading name, that doesn't make clear
it should only be used by the early init code, and also has a bad
calling convention that doesn't allow returning different kinds of
errors. Rename it to early_lookup_bdev to make the use case clear,
and return an errno, where -EINVAL means the string could not be
parsed, and -ENODEV means it the string was valid, but there was
no device found for it.
Also stub out the whole call for !CONFIG_BLOCK as all the non-block
root cases are always covered in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dm-bufio's locking to allow increased concurrent IO -- particularly
for read access for buffers already in dm-bufio's cache.
- Also split dm-bio-prison-v1's spinlock and rbtree with comparable
aim at improving concurrent IO (for the DM thinp target).
- Both the dm-bufio and dm-bio-prison-v1 scaling of the number of
locks and rbtrees used are managed by dm_num_hash_locks(). And the
hash function used by both is dm_hash_locks_index().
- Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE
to be split at the target specified boundary (in terms of
max_discard_sectors, max_write_zeroes_sectors and
max_secure_erase_sectors respectively).
- DM verity error handling fix for check_at_most_once on FEC.
- Update DM verity target to emit audit events on verification failure
and more.
- DM core ->io_hints improvements needed in support of new discard
support that is added to the DM "zero" and "error" targets.
- Fix missing kmem_cache_destroy() call in initialization error path
of both the DM integrity and DM clone targets.
- A couple fixes for DM flakey, also add "error_reads" feature.
- Fix DM core's resume to not lock FS when the DM map is NULL;
otherwise initial table load can race with FS mount that takes
superblock's ->s_umount rw_semaphore.
- Various small improvements to both DM core and DM targets.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmRGtWwACgkQxSPxCi2d
A1pBqgf/W7op3/PdXBI+tlb7j05MEvMaZx0vz3l+qF36SMglaP1yZLZPiU9MCX2V
Sm2t4p7VEn5gAxvmzqa0/pLINC7u/m1IW9O6y3qdOEFAgwJ2st+/yaDqgguN5kiA
uOzecyDfR7n0WU5rkaO2EUneO7MrYweLR3IROFNFNHndl4bVJOafDcOJvmsI4YYe
5PIMHb+AGND+O2lIVOvSiPD6e85trcRWkr2X6DUYlllV3XEaBLke5MP1OAp+o/Y5
MFPfznnuiEvcFAzsBoDebC5j7RBQjHw12Bp8ltZV1ZFbdvluw9q1GD2/uyR5UolV
jmerZXKThV7lRJYqilUmt74Rxl2JSg==
=zPkM
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Split dm-bufio's rw_semaphore and rbtree. Offers improvements to
dm-bufio's locking to allow increased concurrent IO -- particularly
for read access for buffers already in dm-bufio's cache.
- Also split dm-bio-prison-v1's spinlock and rbtree with comparable aim
at improving concurrent IO (for the DM thinp target).
- Both the dm-bufio and dm-bio-prison-v1 scaling of the number of locks
and rbtrees used are managed by dm_num_hash_locks(). And the hash
function used by both is dm_hash_locks_index().
- Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE to
be split at the target specified boundary (in terms of
max_discard_sectors, max_write_zeroes_sectors and
max_secure_erase_sectors respectively).
- DM verity error handling fix for check_at_most_once on FEC.
- Update DM verity target to emit audit events on verification failure
and more.
- DM core ->io_hints improvements needed in support of new discard
support that is added to the DM "zero" and "error" targets.
- Fix missing kmem_cache_destroy() call in initialization error path of
both the DM integrity and DM clone targets.
- A couple fixes for DM flakey, also add "error_reads" feature.
- Fix DM core's resume to not lock FS when the DM map is NULL;
otherwise initial table load can race with FS mount that takes
superblock's ->s_umount rw_semaphore.
- Various small improvements to both DM core and DM targets.
* tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits)
dm: don't lock fs when the map is NULL in process of resume
dm flakey: add an "error_reads" option
dm flakey: remove trailing space in the table line
dm flakey: fix a crash with invalid table line
dm ioctl: fix nested locking in table_clear() to remove deadlock concern
dm: unexport dm_get_queue_limits()
dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE
dm: add helper macro for simple DM target module init and exit
dm raid: remove unused d variable
dm: remove unnecessary (void*) conversions
dm mirror: add DMERR message if alloc_workqueue fails
dm: push error reporting down to dm_register_target()
dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path
dm clone: call kmem_cache_destroy() in dm_clone_init() error path
dm error: add discard support
dm zero: add discard support
dm table: allow targets without devices to set ->io_hints
dm verity: emit audit events on verification failure and more
dm verity: fix error handling for check_at_most_once on FEC
dm: improve hash_locks sizing and hash function
...
In dm_calculate_queue_limits, add call to ->io_hints hook if the
target doesn't provide ->iterate_devices.
This is needed so the "error" and "zero" targets may support
discards. The 2 following commits will add their respective discard
support.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option. So there is nothing the caller can do
with errors except log them. (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)
Just make blk_crypto_evict_key() return void and log errors itself.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'GPL-2.0-only' is used instead of 'GPL-2.0' because SPDX has
deprecated its use.
Suggested-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If a DM device's table references itself, it will crash the kernel with an
infinite recursion. Check for a self-reference in dm_get_device(). This
is a quick check, but it won't catch more complicated circular references.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change DMWARN to DMERR in cases when there is an unrecoverable error.
Change DMWARN to DMCRIT when handling of a case is unimplemented.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Replace blk_queue_nowait with a bdev_nowait helpers that takes the
block_device given that the I/O submission path should not have to
look into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20220927075815.269694-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
being split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmLoAAUACgkQxSPxCi2d
A1rFUAf/RnLkzNPS1QJ1uVbiiW64zQUD2o5U8kAliOZxoXQ45U+CgL22a5VaT2R+
rI9+YSg/VX9YkdJwB6I+y7VRWjUCO3NfYOfQUX5NS8GfcPQQn2Zp+jy3t8VnjjXN
5+8Ylu5tX1+QSQiBB9JvIgiK71rSorT6H+KF6bZypL7te5kj39hDaRbmh40VOMOY
QWfs8DmyJft9IHPG7Mku/rFJbdVJph3f31IoqUOoGTOKoDPDUDezhCVHi2vpFcV+
S+iCKkeXmP6eUdCnNzBreYPTcP9OtCvkZEPhFg4lh+jyhjyFq1o0B8G5cRo5jvgr
GcN1GUT040sSqNXFquA4UU6RGvaxlg==
=gBRJ
-----END PGP SIGNATURE-----
Merge tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Refactor DM core's mempool allocation so that it clearer by not being
split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
* tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm: fix dm-raid crash if md_handle_request() splits bio
dm raid: fix address sanitizer warning in raid_resume
dm raid: fix address sanitizer warning in raid_status
dm: Start pr_preempt from the same starting path
dm: Fix PR release handling for non All Registrants
dm: Start pr_reserve from the same starting path
dm: Allow dm_call_pr to be used for path searches
dm: return early from dm_pr_call() if DM device is suspended
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
dm writecache: count number of blocks discarded, not number of discard bios
dm writecache: count number of blocks written, not number of write bios
dm writecache: count number of blocks read, not number of read bios
dm writecache: return void from functions
dm kcopyd: use __GFP_HIGHMEM when allocating pages
dm writecache: set a default MAX_WRITEBACK_JOBS
Documentation: dm writecache: Render status list as list
Documentation: dm writecache: add blank line before optional parameters
dm snapshot: fix typo in snapshot_map() comment
dm raid: remove redundant "the" in parse_raid_params() comment
dm cache: fix typo in 2 comment blocks
...
Rename from "tgt" to "ti" so that all of dm-table.c code uses the same
naming for dm_target variables.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
All callers of dm_table_get_target() are expected to do proper bounds
checking on the index they pass.
Move dm_table_get_target() to dm-core.h to make it extra clear that only
DM core code should be using it. Switch it to be inlined while at it.
Standardize all DM core callers to use the same for loop pattern and
make associated variables as local as possible. Rename some variables
(e.g. s/table/t/ and s/tgt/ti/) along the way.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
More efficient and readable to just access table->num_targets directly.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use bdev_is_zoned in all places where a block_device is available instead
of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current split between dm_table_alloc_md_mempools and
dm_alloc_md_mempools is rather arbitrary, so merge the two
into one easy to follow function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The use of bioset_init_from_src mean that the pre-allocated pools weren't
used for anything except parameter passing, and the integrity pool
creation got completely lost for the actual live mapped_device. Fix that
by assigning the actual preallocated dm_md_mempools to the mapped_device
and using that for I/O instead of creating new mempools.
Fixes: 2a2a4c510b ("dm: use bioset_init_from_src() to copy bio_set")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
It was reported that the "generic/250" test in xfstests (which uses
the dm-error target) demonstrates a regression where the kernel
crashes in bioset_exit().
Since commit cfc97abcbe ("dm: conditionally enable
BIOSET_PERCPU_CACHE for dm_io bioset") the bioset_init() for the dm_io
bioset will setup the bioset's per-cpu alloc cache if all devices have
QUEUE_FLAG_POLL set.
But there was an bug where a target that doesn't have any data devices
(and that doesn't even set the .iterate_devices dm target callback)
will incorrectly return true from dm_table_supports_poll().
Fix this by updating dm_table_supports_poll() to follow dm-table.c's
well-worn pattern for testing that _all_ targets in a DM table do in
fact have underlying devices that set QUEUE_FLAG_POLL.
NOTE: An additional block fix is still needed so that
bio_alloc_cache_destroy() clears the bioset's ->cache member.
Otherwise, a DM device's table reload that transitions the DM device's
bioset from using a per-cpu alloc cache to _not_ using one will result
in bioset_exit() crashing in bio_alloc_cache_destroy() because dm's
dm_io bioset ("io_bs") was left with a stale ->cache member.
Fixes: cfc97abcbe ("dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset")
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use jump_labels to further reduce cost of unlikely branches for zoned
block devices, dm-stats and swap_bios throttling.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
A bioset's per-cpu alloc cache may have broader utility in the future
but for now constrain it to being tightly coupled to QUEUE_FLAG_POLL.
Also change dm_io_complete() to use bio_clear_polled() so that it
properly clears all associated bio state on requeue.
This commit improves DM's hipri bio polling (REQ_POLLED) perf by
7 - 20% depending on the system.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the stable writes flag based on the block_device
instead of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
Support bio polling (REQ_POLLED) in the following approach:
1) only support io polling on normal READ/WRITE, and other abnormal IOs
still fallback to IRQ mode, so the target io (and DM's clone bio) is
exactly inside the dm io.
2) hold one refcnt on io->io_count after submitting this dm bio with
REQ_POLLED
3) support dm native bio splitting, any dm io instance associated with
current bio will be added into one list which head is bio->bi_private
which will be recovered before ending this bio
4) implement .poll_bio() callback, call bio_poll() on the single target
bio inside the dm io which is retrieved via bio->bi_bio_drv_data; call
dm_io_dec_pending() after the target io is done in .poll_bio()
5) enable QUEUE_FLAG_POLL if all underlying queues enable QUEUE_FLAG_POLL,
which is based on Jeffle's previous patch.
These changes are good for a 30-35% IOPS improvement for polled IO.
For detailed test results please see (Jens, thanks for testing!):
https://listman.redhat.com/archives/dm-devel/2022-March/049868.html
or https://marc.info/?l=linux-block&m=164684246214700&w=2
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Just use the %pg format specifier instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.
Link: https://lore.kernel.org/r/20220209082828.2629273-7-hch@lst.de
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
subsystem. Also enhance both the integrity and crypt targets to emit
events to via dm-audit.
- Various other simple code improvements and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmGJlFkACgkQxSPxCi2d
A1pqwwf/YZ6kNKRQaKF1mbkkHOxa/ULf7qIhi/R0epwJu4j1RGsCACS34EqzLc4c
x15h6flCNj1IBVAqTvMUETYTjTLtyrcfD0yBRWYw2RL0ksHMHyMvd1r/7aE64+pj
EeZk9Xzcx3Gsq9GOzKfYA2AX0PrypkKSjgHK7hgv+Jh5heqkFcnMXSl3l7BQ6vbr
ue9joPSI7+6eVFMDn32KxyHzfm6zZo1nmKZ6tQBBHD1D9yBqWTAhXiyXhRA+BOYH
Tg5wE1fvZ/htyZNEc1cMRArzLF6q9pEU4r8j472N6IcJbhIJzSu0V60zVvexNWG3
fJSIWqlta1KFK8SQttmDmfFnJiFcyw==
=t097
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM core support for emitting audit events through the audit
subsystem. Also enhance both the integrity and crypt targets to emit
events to via dm-audit.
- Various other simple code improvements and cleanups.
* tag 'for-5.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: log table creation error code
dm: make workqueue names device-specific
dm writecache: Make use of the helper macro kthread_run()
dm crypt: Make use of the helper macro kthread_run()
dm verity: use bvec_kmap_local in verity_for_bv_block
dm log writes: use memcpy_from_bvec in log_writes_map
dm integrity: use bvec_kmap_local in __journal_read_write
dm integrity: use bvec_kmap_local in integrity_metadata
dm: add add_disk() error handling
dm: Remove redundant flush_workqueue() calls
dm crypt: log aead integrity violations to audit subsystem
dm integrity: log audit events for dm-integrity target
dm: introduce audit event module for device mapper
Help debugging table creation errors by adding the error name in the log.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Vadi
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block
Pull bdev size cleanups from Jens Axboe:
"Clean up the bdev size handling with new bdev_nr_bytes() helper"
* tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits)
partitions/ibm: use bdev_nr_sectors instead of open coding it
partitions/efi: use bdev_nr_bytes instead of open coding it
block/ioctl: use bdev_nr_sectors and bdev_nr_bytes
block: cache inode size in bdev
udf: use sb_bdev_nr_blocks
reiserfs: use sb_bdev_nr_blocks
ntfs: use sb_bdev_nr_blocks
jfs: use sb_bdev_nr_blocks
ext4: use sb_bdev_nr_blocks
block: add a sb_bdev_nr_blocks helper
block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate
squashfs: use bdev_nr_bytes instead of open coding it
reiserfs: use bdev_nr_bytes instead of open coding it
pstore/blk: use bdev_nr_bytes instead of open coding it
ntfs3: use bdev_nr_bytes instead of open coding it
nilfs2: use bdev_nr_bytes instead of open coding it
nfs/blocklayout: use bdev_nr_bytes instead of open coding it
jfs: use bdev_nr_bytes instead of open coding it
hfsplus: use bdev_nr_sectors instead of open coding it
hfs: use bdev_nr_sectors instead of open coding it
...
blk_keyslot_manager is misnamed because it doesn't necessarily manage
keyslots. It actually does several different things:
- Contains the crypto capabilities of the device.
- Provides functions to control the inline encryption hardware.
Originally these were just for programming/evicting keyslots;
however, new functionality (hardware-wrapped keys) will require new
functions here which are unrelated to keyslots. Moreover,
device-mapper devices already (ab)use "keyslot_evict" to pass key
eviction requests to their underlying devices even though
device-mapper devices don't have any keyslots themselves (so it
really should be "evict_key", not "keyslot_evict").
- Sometimes (but not always!) it manages keyslots. Originally it
always did, but device-mapper devices don't have keyslots
themselves, so they use a "passthrough keyslot manager" which
doesn't actually manage keyslots. This hack works, but the
terminology is unnatural. Also, some hardware doesn't have keyslots
and thus also uses a "passthrough keyslot manager" (support for such
hardware is yet to be upstreamed, but it will happen eventually).
Let's stop having keyslot managers which don't actually manage keyslots.
Instead, rename blk_keyslot_manager to blk_crypto_profile.
This is a fairly big change, since for consistency it also has to update
keyslot manager-related function names, variable names, and comments --
not just the actual struct name. However it's still a fairly
straightforward change, as it doesn't change any actual functionality.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helpers to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the integrity/metadata handling definitions out into a new header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
