- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZUFJRgAKCRCivnWIJHzd
FtgYAP9cMsc1Mhlw3jNQnTc6q0cbTulD/SoEDPUat1dXMqjs+gEAnskwQTrTX834
fgGQeCAyp7Gmar+KeP64H0xm8kPSpAw=
=R4M7
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
Restricted CXL Host (RCH) Error Handling undoes the topology munging of
CXL 1.1 to enabled some AER recovery, and lands some base infrastructure
for handling Root-Complex-Event-Collectors (RCECs) with CXL. Include
this long running series finally for v6.7.
Core & protocols
----------------
- Support usec resolution of TCP timestamps, enabled selectively by
a route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were created
via the kernel cmdline at boot, rather than via configfs at runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF
---
- Add new veth-like netdevice where BPF program defines the logic
of the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should
never be true but are hard for the verifier to infer.
With some extra flexibility around handling of the exit / failure.
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on
the value for the current CPU. This allows to deprecate local
one-off implementations of per-CPU storage like
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code
----------------------
- overflow: add DEFINE_FLEX() for on-stack definition of structs
with flexible array members.
- Process doc update with more guidance for reviewers.
Driver API
----------
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring
and querying state of PLL circuits used for clock syntonization,
in network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc
----
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed
-------
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block selection
for IPv6 multicast forwarding and ordering of blocks in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS
to make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=46nS
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
-----BEGIN PGP SIGNATURE-----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=sfp8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.7' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.7:
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests
-----BEGIN PGP SIGNATURE-----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=TFKQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.7-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.7
- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/rAQACgkQJNaLcl1U
h9AXVwf/SwWrxTus3+O2hS5rwusjqQBn1t2mzlnxsYNVCYGBcjOpMGL4HrJzn++e
DJXoMyWis5FNKFWyPtKMGE1kZYdUUE/g7LpZOBew4P47nBv6SQWRvUxPfoq8mdOg
Xb4+kjBzTq1dhwZnZPvNdsknvM7cLfx/lyo2vUJR4peDL0rzgnx72fhRZAjzh2OH
CSz69aTjpliqikp+V7JVFYf2yma2LjTOCL2saiIF/PcxsqUUa73XTggg610EPY+R
pOFb2MBRDbZuJrETbaiytLwtcPuvrpiHRHhxuClsjHGVTDbGfE7GzePS+yUu66y9
LO8oAl7kJebw+WWffIOoL2IjXcG9tA==
=nn11
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
* cpuset now supports remote partitions where CPUs can be reserved for
exclusive use down the tree without requiring all the intermediate nodes
to be partitions. This makes it easier to use partitions without modifying
existing cgroup hierarchy.
* cpuset partition configuration behavior improvement.
* cgroup_favordynmods= boot param added to allow setting the flag on boot on
cgroup1.
* Misc code and doc updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZUBUKA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGWfMAP9WP+Z21qzzL2bY5I5kOxu+rD2fF9ORk7azILrI
c3gXSQD/bdxNWcdtrCQMvs+ToNEJvqDFxrmgG5uRUF8Ea+FCtQ8=
=gZj2
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now supports remote partitions where CPUs can be reserved for
exclusive use down the tree without requiring all the intermediate
nodes to be partitions. This makes it easier to use partitions
without modifying existing cgroup hierarchy.
- cpuset partition configuration behavior improvement
- cgroup_favordynmods= boot param added to allow setting the flag on
boot on cgroup1
- Misc code and doc updates
* tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs/cgroup: Add the list of threaded controllers to cgroup-v2.rst
cgroup: use legacy_name for cgroup v1 disable info
cgroup/cpuset: Cleanup signedness issue in cpu_exclusive_check()
cgroup/cpuset: Enable invalid to valid local partition transition
cgroup: add cgroup_favordynmods= command-line option
cgroup/cpuset: Extend test_cpuset_prs.sh to test remote partition
cgroup/cpuset: Documentation update for partition
cgroup/cpuset: Check partition conflict with housekeeping setup
cgroup/cpuset: Introduce remote partition
cgroup/cpuset: Add cpuset.cpus.exclusive for v2
cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2
cgroup/cpuset: Fix load balance state in update_partition_sd_lb()
cgroup: Avoid extra dereference in css_populate_dir()
cgroup: Check for ret during cgroup1_base_files cft addition
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
This pull request contains the following branches:
rcu/torture: RCU torture, locktorture and generic torture infrastructure
updates that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
rcu/fixes: Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments.
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM.
* Object information is now dumped in case of invalid callback
invocation.
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed.
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test minor fixes and doc
improvements.
rcu/tasks: RCU tasks minor fixes
rcu/stall: Stall detection updates. Introduce RCU CPU Stall notifiers
that allows a subsystem to provide informations to help debugging.
Also cure some false positive stalls.
-----BEGIN PGP SIGNATURE-----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=cVD7
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
o Add stdarg.h header and a few additional system-call upgrades.
o Add support for constructors and destructors.
o Add tests to verify the ability to link multiple .o files
against nolibc.
o Numerous string-function optimizations and improvements.
o Prevent redundant kernel relinks by avoiding embedding of
initramfs into the kernel image.
o Allow building i386 with multiarch compiler and make ppc64le
use qemu-system-ppc64.
o Miscellaneous fixups, including addition of -nostdinc for
nolibc-test, avoiding -Wstringop-overflow warnings, and avoiding
unused parameter warnings for ENOSYS fallbacks.
-----BEGIN PGP SIGNATURE-----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=UKBQ
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2023.10.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Add stdarg.h header and a few additional system-call upgrades
- Add support for constructors and destructors
- Add tests to verify the ability to link multiple .o files against
nolibc
- Numerous string-function optimizations and improvements
- Prevent redundant kernel relinks by avoiding embedding of initramfs
into the kernel image
- Allow building i386 with multiarch compiler and make ppc64le use
qemu-system-ppc64
- Miscellaneous fixups, including addition of -nostdinc for
nolibc-test, avoiding -Wstringop-overflow warnings, and avoiding
unused parameter warnings for ENOSYS fallbacks
* tag 'nolibc.2023.10.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: add tests for multi-object linkage
selftests/nolibc: use qemu-system-ppc64 for ppc64le
tools/nolibc: add support for constructors and destructors
tools/nolibc: drop test for getauxval(AT_PAGESZ)
tools/nolibc: automatically detect necessity to use pselect6
tools/nolibc: don't define new syscall number
tools/nolibc: avoid unused parameter warnings for ENOSYS fallbacks
selftests/nolibc: allow building i386 with multiarch compiler
selftests/nolibc: don't embed initramfs into kernel image
selftests/nolibc: libc-test: avoid -Wstringop-overflow warnings
tools/nolibc: string: Remove the `_nolibc_memcpy_up()` function
tools/nolibc: string: Remove the `_nolibc_memcpy_down()` function
tools/nolibc: x86-64: Use `rep stosb` for `memset()`
tools/nolibc: x86-64: Use `rep movsb` for `memcpy()` and `memmove()`
selftests/nolibc: use -nostdinc for nolibc-test
tools/nolibc: add stdarg.h header
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency reduction efforts
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tT5F
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm handling updates from Ingo Molnar:
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency
reduction efforts
- Misc cleanups & fixes
* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
selftests/x86/lam: Zero out buffer for readlink()
x86/sev: Drop unneeded #include
x86/sev: Move sev_setup_arch() to mem_encrypt.c
x86/tdx: Replace deprecated strncpy() with strtomem_pad()
selftests/x86/mm: Add new test that userspace stack is in fact NX
x86/sev: Make boot_ghcb_page[] static
x86/boot: Move x86_cache_alignment initialization to correct spot
x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
x86_64: Show CR4.PSE on auxiliaries like on BSP
x86/iommu/docs: Update AMD IOMMU specification document URL
x86/sev/docs: Update document URL in amd-memory-encryption.rst
x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
x86/numa: Introduce numa_fill_memblks()
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping symbols
- Minor cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9U5x
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Misc fixes and cleanups:
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping
symbols
- Minor cleanups"
* tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Skip over mapping symbols in output from readelf
scripts/faddr2line: Use LLVM addr2line and readelf if LLVM=1
scripts/faddr2line: Don't filter out non-function symbols from readelf
objtool: Remove max symbol name length limitation
objtool: Propagate early errors
objtool: Use 'the fallthrough' pseudo-keyword
x86/speculation, objtool: Use absolute relocations for annotations
x86/unwind/orc: Remove redundant initialization of 'mid' pointer in __orc_find()
machinery and other, general cleanups to the hw mitigations code,
by Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=E7c4
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by
Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
* tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/retpoline: Document some thunk handling aspects
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
x86/callthunks: Delete unused "struct thunk_desc"
x86/vdso: Run objtool on vdso32-setup.o
objtool: Fix return thunk patching in retpolines
x86/srso: Remove unnecessary semicolon
x86/pti: Fix kernel warnings for pti= and nopti cmdline options
x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk()
x86/nospec: Refactor UNTRAIN_RET[_*]
x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros
x86/srso: Disentangle rethunk-dependent options
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
x86/bugs: Remove default case for fully switched enums
x86/srso: Remove 'pred_cmd' label
x86/srso: Unexport untraining functions
x86/srso: Improve i-cache locality for alias mitigation
x86/srso: Fix unret validation dependencies
x86/srso: Fix vulnerability reporting for missing microcode
x86/srso: Print mitigation for retbleed IBPB case
x86/srso: Print actual mitigation if requested mitigation isn't possible
...
Here's the bcachefs filesystem pull request.
One new patch since last week: the exportfs constants ended up
conflicting with other filesystems that are also getting added to the
global enum, so switched to new constants picked by Amir.
I'll also be sending another pull request later on in the cycle bringing
things up to date my master branch that people are currently running;
that will be restricted to fs/bcachefs/, naturally.
Testing - fstests as well as the bcachefs specific tests in ktest:
https://evilpiepirate.org/~testdashboard/ci?branch=bcachefs-for-upstream
It's also been soaking in linux-next, which resulted in a whole bunch of
smatch complaints and fixes and a patch or two from Kees.
The only new non fs/bcachefs/ patch is the objtool patch that adds
bcachefs functions to the list of noreturns. The patch that exports
osq_lock() has been dropped for now, per Ingo.
Prereq patch list:
faf1dce852 objtool: Add bcachefs noreturns
73badee428 lib/generic-radix-tree.c: Add peek_prev()
9492261ff2 lib/generic-radix-tree.c: Don't overflow in peek()
0fb5d567f5 MAINTAINERS: Add entry for generic-radix-tree
b414e8ecd4 closures: Add a missing include
48b7935722 closures: closure_nr_remaining()
ced58fc7ab closures: closure_wait_event()
bd0d22e41e MAINTAINERS: Add entry for closures
8c8d2d9670 bcache: move closures to lib/
957e48087d locking: export contention tracepoints for bcachefs six locks
21db931445 lib: Export errname
83feeb1955 lib/string_helpers: string_get_size() now returns characters wrote
7d672f4094 stacktrace: Export stack_trace_save_tsk
771eb4fe8b fs: factor out d_mark_tmpfile()
2b69987be5 sched: Add task_struct->faults_disabled_mapping
-----BEGIN PGP SIGNATURE-----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=g+ia
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefs
Pull initial bcachefs updates from Kent Overstreet:
"Here's the bcachefs filesystem pull request.
One new patch since last week: the exportfs constants ended up
conflicting with other filesystems that are also getting added to the
global enum, so switched to new constants picked by Amir.
The only new non fs/bcachefs/ patch is the objtool patch that adds
bcachefs functions to the list of noreturns. The patch that exports
osq_lock() has been dropped for now, per Ingo"
* tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefs: (2781 commits)
exportfs: Change bcachefs fid_type enum to avoid conflicts
bcachefs: Refactor memcpy into direct assignment
bcachefs: Fix drop_alloc_keys()
bcachefs: snapshot_create_lock
bcachefs: Fix snapshot skiplists during snapshot deletion
bcachefs: bch2_sb_field_get() refactoring
bcachefs: KEY_TYPE_error now counts towards i_sectors
bcachefs: Fix handling of unknown bkey types
bcachefs: Switch to unsafe_memcpy() in a few places
bcachefs: Use struct_size()
bcachefs: Correctly initialize new buckets on device resize
bcachefs: Fix another smatch complaint
bcachefs: Use strsep() in split_devs()
bcachefs: Add iops fields to bch_member
bcachefs: Rename bch_sb_field_members -> bch_sb_field_members_v1
bcachefs: New superblock section members_v2
bcachefs: Add new helper to retrieve bch_member from sb
bcachefs: bucket_lock() is now a sleepable lock
bcachefs: fix crc32c checksum merge byte order problem
bcachefs: Fix bch2_inode_delete_keys()
...
- Fix regression in reading scale and unit files from sysfs for PMU
events, so that we can use that info to pretty print instead of
printing raw numbers:
# perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2
Performance counter stats for 'system wide':
1.64 Joules power/energy-ram/
0.20 Joules power/energy-gpu/
2.001228914 seconds time elapsed
#
# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
#
- The small llvm.cpp file used to check if the llvm devel files are present was
incorrectly deleted when removing the BPF event in 'perf trace', put it back
as it is also used by tools/bpf/bpftool, that uses llvm routines to do
disassembly of BPF object files.
- Fix use of addr_location__exit() in dlfilter__object_code(), making sure that
it is only used to pair a previous addr_location__init() call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZTKh5AAKCRCyPKLppCJ+
J/g/AP0f6SNyHJz21JzDTzyjXAeSdMzKwic0LXv+kATQy31HJAD+Kf7UKQieUeZB
fxvp60aKyFN8IVIgpYiAjZMS3k9XPAY=
=N7Gv
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' into perf-tools-next
To get the latest fixes in the perf tools including perf stat output,
dlfilter and LLVM feature detection.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
* kvm-arm64/pmu_pmcr_n:
: User-defined PMC limit, courtesy Raghavendra Rao Ananta
:
: Certain VMMs may want to reserve some PMCs for host use while running a
: KVM guest. This was a bit difficult before, as KVM advertised all
: supported counters to the guest. Userspace can now limit the number of
: advertised PMCs by writing to PMCR_EL0.N, as KVM's sysreg and PMU
: emulation enforce the specified limit for handling guest accesses.
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: PMU: Set PMCR_EL0.N for vCPU based on the associated PMU
KVM: arm64: PMU: Add a helper to read a vCPU's PMCR_EL0
KVM: arm64: Select default PMU in KVM_ARM_VCPU_INIT handler
KVM: arm64: PMU: Introduce helpers to set the guest's PMU
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/writable-id-regs:
: Writable ID registers, courtesy of Jing Zhang
:
: This series significantly expands the architectural feature set that
: userspace can manipulate via the ID registers. A new ioctl is defined
: that makes the mutable fields in the ID registers discoverable to
: userspace.
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: selftests: Test for setting ID register from usersapce
tools headers arm64: Update sysreg.h with kernel sources
KVM: selftests: Generate sysreg-defs.h and add to include path
perf build: Generate arm64's sysreg-defs.h and add to include path
tools: arm64: Add a Makefile for generating sysreg-defs.h
KVM: arm64: Document vCPU feature selection UAPIs
KVM: arm64: Allow userspace to change ID_AA64ZFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64PFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1
KVM: arm64: Allow userspace to change ID_AA64ISAR{0-2}_EL1
KVM: arm64: Bump up the default KVM sanitised debug version to v8p8
KVM: arm64: Reject attempts to set invalid debug arch version
KVM: arm64: Advertise selected DebugVer in DBGDIDR.Version
KVM: arm64: Use guest ID register values for the sake of emulation
KVM: arm64: Document KVM_ARM_GET_REG_WRITABLE_MASKS
KVM: arm64: Allow userspace to get the writable masks for feature ID registers
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The 'prepare' target that generates the arm64 sysreg headers had no
prerequisites, so it wound up forcing a rebuild of all KVM selftests
each invocation. Add a rule for the generated headers and just have
dependents use that for a prerequisite.
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Fixes: 9697d84cc3 ("KVM: selftests: Generate sysreg-defs.h and add to include path")
Tested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Link: https://lore.kernel.org/r/20231027005439.3142015-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Aishwarya reports that KVM selftests for arm64 fail with the following
error:
| make[4]: Entering directory '/tmp/kci/linux/tools/testing/selftests/kvm'
| Makefile:270: warning: overriding recipe for target
| '/tmp/kci/linux/build/kselftest/kvm/get-reg-list'
| Makefile:265: warning: ignoring old recipe for target
| '/tmp/kci/linux/build/kselftest/kvm/get-reg-list'
| make -C ../../../../tools/arch/arm64/tools/
| make[5]: Entering directory '/tmp/kci/linux/tools/arch/arm64/tools'
| Makefile:10: ../tools/scripts/Makefile.include: No such file or directory
| make[5]: *** No rule to make target '../tools/scripts/Makefile.include'.
| Stop.
It would appear that this only affects builds from the top-level
Makefile (e.g. make kselftest-all), as $(srctree) is set to ".". Work
around the issue by shadowing the kselftest naming scheme for the source
tree variable.
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Fixes: 0359c946b1 ("tools headers arm64: Update sysreg.h with kernel sources")
Link: https://lore.kernel.org/r/20231027005439.3142015-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Put an upper bound on the number of I-cache invalidations by
: cacheline to avoid soft lockups
:
: - Get rid of bogus refererence count transfer for THP mappings
:
: - Do a local TLB invalidation on permission fault race
:
: - Fixes for page_fault_test KVM selftest
:
: - Add a tracepoint for detecting MMIO instructions unsupported by KVM
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: arm64: Do not transfer page refcount for THP adjustment
KVM: arm64: Avoid soft lockups due to I-cache maintenance
arm64: tlbflush: Rename MAX_TLBI_OPS
KVM: arm64: Don't use kerneldoc comment for arm64_check_features()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
It looks like a mistake to issue ISB *after* reading PAR_EL1, we should
instead perform it between the AT instruction and the reads of PAR_EL1.
As according to DDI0487J.a IJTYVP,
"When an address translation instruction is executed, explicit
synchronization is required to guarantee the result is visible to
subsequent direct reads of PAR_EL1."
Otherwise all guest_at testcases fail on my box with
==== Test Assertion Failure ====
aarch64/page_fault_test.c:142: par & 1 == 0
pid=1355864 tid=1355864 errno=4 - Interrupted system call
1 0x0000000000402853: vcpu_run_loop at page_fault_test.c:681
2 0x0000000000402cdb: run_test at page_fault_test.c:730
3 0x0000000000403897: for_each_guest_mode at guest_modes.c:100
4 0x00000000004019f3: for_each_test_and_guest_mode at page_fault_test.c:1105
5 (inlined by) main at page_fault_test.c:1131
6 0x0000ffffb153c03b: ?? ??:0
7 0x0000ffffb153c113: ?? ??:0
8 0x0000000000401aaf: _start at ??:?
0x1 != 0x0 (par & 1 != 0)
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231007124043.626-2-yuzenghui@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Running page_fault_test on a Cortex A72 fails with
Test: ro_memslot_no_syndrome_guest_cas
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
Testing memory backing src type: anonymous
==== Test Assertion Failure ====
aarch64/page_fault_test.c:117: guest_check_lse()
pid=1944087 tid=1944087 errno=4 - Interrupted system call
1 0x00000000004028b3: vcpu_run_loop at page_fault_test.c:682
2 0x0000000000402d93: run_test at page_fault_test.c:731
3 0x0000000000403957: for_each_guest_mode at guest_modes.c:100
4 0x00000000004019f3: for_each_test_and_guest_mode at page_fault_test.c:1108
5 (inlined by) main at page_fault_test.c:1134
6 0x0000ffff868e503b: ?? ??:0
7 0x0000ffff868e5113: ?? ??:0
8 0x0000000000401aaf: _start at ??:?
guest_check_lse()
because we don't have a guest_prepare stage to check the presence of
FEAT_LSE and skip the related guest_cas testing, and we end-up failing in
GUEST_ASSERT(guest_check_lse()).
Add the missing .guest_prepare() where it's indeed required.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231007124043.626-1-yuzenghui@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This release completes the SunRPC thread scheduler work that was
begun in v6.6. The scheduler can now find an svc thread to wake in
constant time and without a list walk. Thanks again to Neil Brown
for this overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based
NFSD control plane. The long-term plan is to provide the same
functionality as found in /proc/fs/nfsd, plus some interesting
additions, and then migrate the NFSD user space utilities to
netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was
applied in this release. The goals are to bring this family of
encoding functions in line with the matching NFSv4 decoding
functions and with the NFSv2 and NFSv3 XDR functions, preparing
the way for better memory safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback,
enabling the server to retrieve cached size and mtime data from
clients holding write delegations. If the server can retrieve
this information, it does not have to recall the delegation in
some cases.
The usual panoply of bug fixes and minor improvements round out
this release. As always I am grateful to all contributors,
reviewers, and testers.
-----BEGIN PGP SIGNATURE-----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=B4wJ
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release completes the SunRPC thread scheduler work that was begun
in v6.6. The scheduler can now find an svc thread to wake in constant
time and without a list walk. Thanks again to Neil Brown for this
overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based NFSD
control plane. The long-term plan is to provide the same functionality
as found in /proc/fs/nfsd, plus some interesting additions, and then
migrate the NFSD user space utilities to netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was applied
in this release. The goals are to bring this family of encoding
functions in line with the matching NFSv4 decoding functions and with
the NFSv2 and NFSv3 XDR functions, preparing the way for better memory
safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback, enabling the
server to retrieve cached size and mtime data from clients holding
write delegations. If the server can retrieve this information, it
does not have to recall the delegation in some cases.
The usual panoply of bug fixes and minor improvements round out this
release. As always I am grateful to all contributors, reviewers, and
testers"
* tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (127 commits)
svcrdma: Fix tracepoint printk format
svcrdma: Drop connection after an RDMA Read error
NFSD: clean up alloc_init_deleg()
NFSD: Fix frame size warning in svc_export_parse()
NFSD: Rewrite synopsis of nfsd_percpu_counters_init()
nfsd: Clean up errors in nfs3proc.c
nfsd: Clean up errors in nfs4state.c
NFSD: Clean up errors in stats.c
NFSD: simplify error paths in nfsd_svc()
NFSD: Clean up nfsd4_encode_seek()
NFSD: Clean up nfsd4_encode_offset_status()
NFSD: Clean up nfsd4_encode_copy_notify()
NFSD: Clean up nfsd4_encode_copy()
NFSD: Clean up nfsd4_encode_test_stateid()
NFSD: Clean up nfsd4_encode_exchange_id()
NFSD: Clean up nfsd4_do_encode_secinfo()
NFSD: Clean up nfsd4_encode_access()
NFSD: Clean up nfsd4_encode_readdir()
NFSD: Clean up nfsd4_encode_entry4()
NFSD: Add an nfsd4_encode_nfs_cookie4() helper
...
Variable found is not being initialized, in the case where the desired
mount is not found the variable contains garbage. Fix this by initializing
it to zero.
Link: https://lore.kernel.org/all/20230727150117.627730-1-colin.i.king@gmail.com/
Fixes: a957cbc025 ("rtla: Add -C cgroup support")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Update tsx_cycles_per_elision as per:
https://github.com/intel/perfmon/pull/116
Prefer the el-start event rather than cycles-t for detecting whether
the metric will work as HLE may be disabled. Remove the metric from
sapphirerapids that has no el-start event.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Spelling fixes were already incorporated in the Linux perf tree,
update the version number to reflect this.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The spelling of "in-flight" was switched to "inflight".
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update alderlake and alderlaken events from v1.21 to v1.23 adding the
changes from:
8df4db9433846bd247c6
The tsx_cycles_per_elision metric is updated from PR:
https://github.com/intel/perfmon/pull/116
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The Component Register base address @component_reg_phys is no longer
used after the rework of the Component Register setup which now uses
struct member @reg_map instead. Remove the base address.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-9-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While building on a wide range of distros and clang versions it was
noticed that at least version 12.0.1 (noticed on Alpine 3.15 with
"Alpine clang version 12.0.1") is needed to not fail with BTF generation
errors such as:
Debian:10
Debian clang version 11.0.1-2~deb10u1:
CLANG /tmp/build/perf/util/bpf_skel/.tmp/sample_filter.bpf.o
<SNIP>
GENSKEL /tmp/build/perf/util/bpf_skel/sample_filter.skel.h
libbpf: failed to find BTF for extern 'bpf_cast_to_kern_ctx' [21] section: -2
Error: failed to open BPF object file: No such file or directory
make[2]: *** [Makefile.perf:1121: /tmp/build/perf/util/bpf_skel/sample_filter.skel.h] Error 254
make[2]: *** Deleting file '/tmp/build/perf/util/bpf_skel/sample_filter.skel.h'
Amazon Linux 2:
clang version 11.1.0 (Amazon Linux 2 11.1.0-1.amzn2.0.2)
GENSKEL /tmp/build/perf/util/bpf_skel/sample_filter.skel.h
libbpf: elf: skipping unrecognized data section(18) .eh_frame
libbpf: elf: skipping relo section(19) .rel.eh_frame for section(18) .eh_frame
libbpf: failed to find BTF for extern 'bpf_cast_to_kern_ctx' [21] section: -2
Error: failed to open BPF object file: No such file or directory
make[2]: *** [/tmp/build/perf/util/bpf_skel/sample_filter.skel.h] Error 254
make[2]: *** Deleting file `/tmp/build/perf/util/bpf_skel/sample_filter.skel.h'
Ubuntu 20.04:
clang version 10.0.0-4ubuntu1
CLANG /tmp/build/perf/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o
GENSKEL /tmp/build/perf/util/bpf_skel/bench_uprobe.skel.h
GENSKEL /tmp/build/perf/util/bpf_skel/bperf_leader.skel.h
libbpf: sec '.reluprobe': corrupted symbol #27 pointing to invalid section #65522 for relo #0
GENSKEL /tmp/build/perf/util/bpf_skel/bperf_follower.skel.h
Error: failed to open BPF object file: BPF object format invalid
make[2]: *** [Makefile.perf:1121: /tmp/build/perf/util/bpf_skel/bench_uprobe.skel.h] Error 95
make[2]: *** Deleting file '/tmp/build/perf/util/bpf_skel/bench_uprobe.skel.h'
So check if the version is at least 12.0.1 otherwise disable building
BPF skels and provide a message about it, continuing the build.
The message, when running on amazonlinux:2:
Makefile.config:698: Warning: Disabled BPF skeletons as reliable BTF generation needs at least clang version 12.0.1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZTvGx/Ou6BVnYBqi@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The changes in ("perf evsel: Rename evsel__increase_rlimit to
rlimit__increase_nofile") ended up breaking the python binding that now
references the rlimit__increase_nofile function, add the util/rlimit.o
to the tools/perf/util/python-ext-sources to cure that.
This was detected by the 'perf test python' regression test:
$ perf test python
14: 'import perf' in python : FAILED!
$ perf test -v python
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
14: 'import perf' in python :
--- start ---
test child forked, pid 2912462
python usage test: "echo "import sys ; sys.path.insert(0, '/tmp/build/perf-tools-next/python'); import perf" | '/usr/bin/python3' "
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf-tools-next/python/perf.cpython-311-x86_64-linux-gnu.so: undefined symbol: rlimit__increase_nofile
test child finished with -1
---- end ----
'import perf' in python: FAILED!
$
Fixes: e093a222d7 ("perf evsel: Rename evsel__increase_rlimit to rlimit__increase_nofile")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/lkml/ZTrCS5Z3PZAmfPdV@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In case the kernel sends message back containing attribute not defined
in family spec, following exception is raised to the user:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do trap-get --json '{"bus-name": "netdevsim", "dev-name": "netdevsim1", "trap-name": "source_mac_is_multicast"}'
Traceback (most recent call last):
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 521, in _decode
attr_spec = attr_space.attrs_by_val[attr.type]
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^
KeyError: 132
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/jiri/work/linux/./tools/net/ynl/cli.py", line 61, in <module>
main()
File "/home/jiri/work/linux/./tools/net/ynl/cli.py", line 49, in main
reply = ynl.do(args.do, attrs, args.flags)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 731, in do
return self._op(method, vals, flags)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 719, in _op
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 525, in _decode
raise Exception(f"Space '{space}' has no attribute with value '{attr.type}'")
Exception: Space 'devlink' has no attribute with value '132'
Introduce a command line option "process-unknown" and pass it down to
YnlFamily class constructor to allow user to process unknown
attributes and types and print them as binaries.
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do trap-get --json '{"bus-name": "netdevsim", "dev-name": "netdevsim1", "trap-name": "source_mac_is_multicast"}' --process-unknown
{'UnknownAttr(129)': {'UnknownAttr(0)': b'\x00\x00\x00\x00\x00\x00\x00\x00',
'UnknownAttr(1)': b'\x00\x00\x00\x00\x00\x00\x00\x00',
'UnknownAttr(2)': b'\x0e\x00\x00\x00\x00\x00\x00\x00'},
'UnknownAttr(132)': b'\x00',
'UnknownAttr(133)': b'',
'UnknownAttr(134)': {'UnknownAttr(0)': b''},
'bus-name': 'netdevsim',
'dev-name': 'netdevsim1',
'trap-action': 'drop',
'trap-group-name': 'l2_drops',
'trap-name': 'source_mac_is_multicast'}
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231027092525.956172-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cxl-cli unit test for firmware update does operations like starting
an asynchronous firmware update, making sure it is in progress, and
attempting to cancel it. In some cases, such as with no or minimal
dynamic debugging turned on, the firmware update completes too quickly,
not allowing the test to have a chance to verify it was in progress.
This caused a failure of the signature:
expected fw_update_in_progress:true
test/cxl-update-firmware.sh: failed at line 88
Fix this by adding a delay (~1.5 - 2 ms) to each firmware transfer
request handled by the mocked interface.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20231026-vv-fw_upd_test_fix-v2-1-5282fd193883@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Root decoder granularity must match value from CFWMS, which may not
be the region's granularity for non-interleaved root decoders.
So when calculating granularities for host bridge decoders, use the
region's granularity instead of the root decoder's granularity to ensure
the correct granularities are set for the host bridge decoders and any
downstream switch decoders.
Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch.
Region created with 2048 granularity using following command line:
cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \
-g 2048 -s 2048M
Use "cxl list -PDE | grep granularity" to get a view of the granularity
set at each level of the topology.
Before this patch:
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":512,
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":512,
"interleave_granularity":256,
After:
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":4096,
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":4096,
"interleave_granularity":2048,
Fixes: 27b3f8d138 ("cxl/region: Program target lists")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in
[djbw: fixup the prebuilt cxl_test region]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add 2 tests to the layout1 fixture:
* topology_changes_with_net_only: Checks that FS topology
changes are not denied by network-only restrictions.
* topology_changes_with_net_and_fs: Make sure that FS topology
changes are still denied with FS and network restrictions.
This specifically test commit d722036403 ("landlock: Allow FS topology
changes for domains without such rule type").
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231027154615.815134-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Just like displaying "invert" after "Info: ", "simult" should be
displayed too when rm_subflow_nr doesn't match the expect value in
chk_rm_nr():
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
rm [ ok ]
rmsf [ ok ] 3 in [2:4]
Info: invert simult
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-10-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Global var mptcp_connect defined at the front of mptcp_sockopt.sh is
duplicate with local var mptcp_connect defined in do_transfer(), drop
this useless global one.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-9-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's
1, wait_rm_addr/sf will never break, and will loop ten times, then
'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long,
which can sometimes make the tests fail.
A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain
the current value, and then pass into wait_rm_addr/sf.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some userspace pm tests failed are reported by CI:
112 userspace pm add & remove address
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
mptcp_info subflows=1:1 [ ok ]
subflows_total 2:2 [ ok ]
mptcp_info add_addr_signal=1:1 [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
mptcp_info subflows=0:0 [ ok ]
subflows_total 1:1 [fail]
got subflows 0:0 expected 1:1
Server ns stats
TcpPassiveOpens 2 0.0
TcpInSegs 118 0.0
This patch fixes them by changing 'speed' to 5 to run the tests much more
slowly.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test the new MDB get functionality by converting dump and grep to MDB
get.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test the new MDB get functionality by converting dump and grep to MDB
get.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZTp12QAKCRDbK58LschI
g8BrAQDifqp5liEEdXV8jdReBwJtqInjrL5tzy5LcyHUMQbTaAEA6Ph3Ct3B+3oA
mFnIW/y6UJiJrby0Xz4+vV5BXI/5WQg=
=pLCV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-26
We've added 51 non-merge commits during the last 10 day(s) which contain
a total of 75 files changed, 5037 insertions(+), 200 deletions(-).
The main changes are:
1) Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF,
from Chuyi Zhou.
2) Fix BPF verifier's iterator convergence logic to use exact states
comparison for convergence checks, from Eduard Zingerman,
Andrii Nakryiko and Alexei Starovoitov.
3) Add BPF programmable net device where bpf_mprog defines the logic
of its xmit routine. It can operate in L3 and L2 mode,
from Daniel Borkmann and Nikolay Aleksandrov.
4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking
for global per-CPU allocator, from Hou Tao.
5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section
was going to be present whenever a binary has SHT_GNU_versym section,
from Andrii Nakryiko.
6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into
atomic_set_release(), from Paul E. McKenney.
7) Add a warning if NAPI callback missed xdp_do_flush() under
CONFIG_DEBUG_NET which helps checking if drivers were missing
the former, from Sebastian Andrzej Siewior.
8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing
a warning under sleepable programs, from Yafang Shao.
9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before
checking map_locked, from Song Liu.
10) Make BPF CI linked_list failure test more robust,
from Kumar Kartikeya Dwivedi.
11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik.
12) Fix xsk starving when multiple xsk sockets were associated with
a single xsk_buff_pool, from Albert Huang.
13) Clarify the signed modulo implementation for the BPF ISA standardization
document that it uses truncated division, from Dave Thaler.
14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider
signed bounds knowledge, from Andrii Nakryiko.
15) Add an option to XDP selftests to use multi-buffer AF_XDP
xdp_hw_metadata and mark used XDP programs as capable to use frags,
from Larysa Zaremba.
16) Fix bpftool's BTF dumper wrt printing a pointer value and another
one to fix struct_ops dump in an array, from Manu Bretelle.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits)
netkit: Remove explicit active/peer ptr initialization
selftests/bpf: Fix selftests broken by mitigations=off
samples/bpf: Allow building with custom bpftool
samples/bpf: Fix passing LDFLAGS to libbpf
samples/bpf: Allow building with custom CFLAGS/LDFLAGS
bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free
selftests/bpf: Add selftests for netkit
selftests/bpf: Add netlink helper library
bpftool: Extend net dump with netkit progs
bpftool: Implement link show support for netkit
libbpf: Add link-based API for netkit
tools: Sync if_link uapi header
netkit, bpf: Add bpf programmable net device
bpf: Improve JEQ/JNE branch taken logic
bpf: Fold smp_mb__before_atomic() into atomic_set_release()
bpf: Fix unnecessary -EBUSY from htab_lock_bucket
xsk: Avoid starving the xsk further down the list
bpf: print full verifier states on infinite loop detection
selftests/bpf: test if state loops are detected in a tricky case
bpf: correct loop detection for iterators convergence
...
====================
Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Page pool code is compiled conditionally, but the operations
are part of the shared netlink family. We can handle this
by reporting empty list of pools or -EOPNOTSUPP / -ENOSYS
but the cleanest way seems to be removing the ops completely
at compilation time. That way user can see that the page
pool ops are not present using genetlink introspection.
Same way they'd check if the kernel is "new enough" to
support the ops.
Extend the specs with the ability to specify the config
condition under which op (and its policies, etc.) should
be hidden.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231025162253.133159-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct nla_policy is usually constant itself, but unless
we make the ranges inside constant we won't be able to
make range structs const. The ranges are not modified
by the core.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231025162204.132528-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 82 test suites to check edge cases related to bind() and connect()
actions. They are defined with 6 fixtures and their variants:
The "protocol" fixture is extended with 12 variants defined as a matrix
of: sandboxed/not-sandboxed, IPv4/IPv6/unix network domain, and
stream/datagram socket. 4 related tests suites are defined:
* bind: Tests bind action.
* connect: Tests connect action.
* bind_unspec: Tests bind action with the AF_UNSPEC socket family.
* connect_unspec: Tests connect action with the AF_UNSPEC socket family.
The "ipv4" fixture is extended with 4 variants defined as a matrix
of: sandboxed/not-sandboxed, and stream/datagram socket. 1 related test
suite is defined:
* from_unix_to_inet: Tests to make sure unix sockets' actions are not
restricted by Landlock rules applied to TCP ones.
The "tcp_layers" fixture is extended with 8 variants defined as a matrix
of: IPv4/IPv6 network domain, and different number of landlock rule
layers. 2 related tests suites are defined:
* ruleset_overlap: Tests nested layers with less constraints.
* ruleset_expand: Tests nested layers with more constraints.
In the "mini" fixture 4 tests suites are defined:
* network_access_rights: Tests handling of known access rights.
* unknown_access_rights: Tests handling of unknown access rights.
* inval: Tests unhandled allowed access and zero access value.
* tcp_port_overflow: Tests with port values greater than 65535.
The "ipv4_tcp" fixture supports IPv4 network domain with stream socket.
2 tests suites are defined:
* port_endianness: Tests with big/little endian port formats.
* with_fs: Tests a ruleset with both filesystem and network
restrictions.
The "port_specific" fixture is extended with 4 variants defined
as a matrix of: sandboxed/not-sandboxed, IPv4/IPv6 network domain,
and stream socket. 2 related tests suites are defined:
* bind_connect_zero: Tests with port 0.
* bind_connect_1023: Tests with port 1023.
Test coverage for security/landlock is 92.4% of 710 lines according to
gcc/gcov-13.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-11-konstantin.meskhidze@huawei.com
[mic: Extend commit message, update test coverage, clean up capability
use, fix useless TEST_F_FORK, and improve ipv4_tcp.with_fs]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add network rules support in the ruleset management helpers and the
landlock_create_ruleset() syscall. Extend user space API to support
network actions:
* Add new network access rights: LANDLOCK_ACCESS_NET_BIND_TCP and
LANDLOCK_ACCESS_NET_CONNECT_TCP.
* Add a new network rule type: LANDLOCK_RULE_NET_PORT tied to struct
landlock_net_port_attr. The allowed_access field contains the network
access rights, and the port field contains the port value according to
the controlled protocol. This field can take up to a 64-bit value
but the maximum value depends on the related protocol (e.g. 16-bit
value for TCP). Network port is in host endianness [1].
* Add a new handled_access_net field to struct landlock_ruleset_attr
that contains network access rights.
* Increment the Landlock ABI version to 4.
Implement socket_bind() and socket_connect() LSM hooks, which enable
to control TCP socket binding and connection to specific ports.
Expand access_masks_t from u16 to u32 to be able to store network access
rights alongside filesystem access rights for rulesets' handled access
rights.
Access rights are not tied to socket file descriptors but checked at
bind() or connect() call time against the caller's Landlock domain. For
the filesystem, a file descriptor is a direct access to a file/data.
However, for network sockets, we cannot identify for which data or peer
a newly created socket will give access to. Indeed, we need to wait for
a connect or bind request to identify the use case for this socket.
Likewise a directory file descriptor may enable to open another file
(i.e. a new data item), but this opening is also restricted by the
caller's domain, not the file descriptor's access rights [2].
[1] https://lore.kernel.org/r/278ab07f-7583-a4e0-3d37-1bacd091531d@digikod.net
[2] https://lore.kernel.org/r/263c1eb3-602f-57fe-8450-3f138581bee7@digikod.net
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-9-konstantin.meskhidze@huawei.com
[mic: Extend commit message, fix typo in comments, and specify
endianness in the documentation]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
There are two reasons to do this, firstly there is a shellcheck warning
in cs_etm_dev_name(), which can be completely deleted. And secondly the
current iteration method doesn't support systems with both ETE and ETM
because it picks one or the other. There isn't a known system with this
configuration, but it could happen in the future.
Iterating over all the sources for each CPU can be done by going through
/sys/bus/event_source/devices/cs_etm/cpu* and following the symlink back
to the Coresight device in /sys/bus/coresight/devices. This will work
whether the device is ETE, ETM or any future name, and is much simpler
and doesn't require any hard coded version numbers
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: tianruidong@linux.alibaba.com
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: atrajeev@linux.vnet.ibm.com
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231023131550.487760-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add tma_info_system_socket_clks and uncore_freq metrics.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add tma_info_system_socket_clks and uncore_freq metrics that require a
broadwellx style uncore event for UNC_CLOCK.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112
Fixes: 7d124303d6 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The IOMMU_HWPT_ALLOC ioctl now supports passing user_data to allocate a
user-managed domain for nested HWPTs. Add its coverage for that. Also,
update _test_cmd_hwpt_alloc() and add test_cmd/err_hwpt_alloc_nested().
Link: https://lore.kernel.org/r/20231026043938.63898-11-yi.l.liu@intel.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When we configure the kernel command line with 'mitigations=off' and set
the sysctl knob 'kernel.unprivileged_bpf_disabled' to 0, the commit
bc5bc309db ("bpf: Inherit system settings for CPU security mitigations")
causes issues in the execution of `test_progs -t verifier`. This is
because 'mitigations=off' bypasses Spectre v1 and Spectre v4 protections.
Currently, when a program requests to run in unprivileged mode
(kernel.unprivileged_bpf_disabled = 0), the BPF verifier may prevent
it from running due to the following conditions not being enabled:
- bypass_spec_v1
- bypass_spec_v4
- allow_ptr_leaks
- allow_uninit_stack
While 'mitigations=off' enables the first two conditions, it does not
enable the latter two. As a result, some test cases in
'test_progs -t verifier' that were expected to fail to run may run
successfully, while others still fail but with different error messages.
This makes it challenging to address them comprehensively.
Moreover, in the future, we may introduce more fine-grained control over
CPU mitigations, such as enabling only bypass_spec_v1 or bypass_spec_v4.
Given the complexity of the situation, rather than fixing each broken test
case individually, it's preferable to skip them when 'mitigations=off' is
in effect and introduce specific test cases for the new 'mitigations=off'
scenario. For instance, we can introduce new BTF declaration tags like
'__failure__nospec', '__failure_nospecv1' and '__failure_nospecv4'.
In this patch, the approach is to simply skip the broken test cases when
'mitigations=off' is enabled. The result of `test_progs -t verifier` as
follows after this commit,
Before this commit
==================
- without 'mitigations=off'
- kernel.unprivileged_bpf_disabled = 2
Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED
- kernel.unprivileged_bpf_disabled = 0
Summary: 74/1336 PASSED, 0 SKIPPED, 0 FAILED <<<<
- with 'mitigations=off'
- kernel.unprivileged_bpf_disabled = 2
Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED
- kernel.unprivileged_bpf_disabled = 0
Summary: 63/1276 PASSED, 0 SKIPPED, 11 FAILED <<<< 11 FAILED
After this commit
=================
- without 'mitigations=off'
- kernel.unprivileged_bpf_disabled = 2
Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED
- kernel.unprivileged_bpf_disabled = 0
Summary: 74/1336 PASSED, 0 SKIPPED, 0 FAILED <<<<
- with this patch, with 'mitigations=off'
- kernel.unprivileged_bpf_disabled = 2
Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED
- kernel.unprivileged_bpf_disabled = 0
Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED <<<< SKIPPED
Fixes: bc5bc309db ("bpf: Inherit system settings for CPU security mitigations")
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Closes: https://lore.kernel.org/bpf/CAADnVQKUBJqg+hHtbLeeC2jhoJAWqnmRAzXW3hmUCNSV9kx4sQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20231025031144.5508-1-laoar.shao@gmail.com
Merge updates related to system sleep handling, one power capping update
and one PM utility update for 6.7-rc1:
- Use __get_safe_page() rather than touching the list in hibernation
snapshot code (Brian Geffon).
- Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav).
- Clean up sync_read handling in snapshot_write_next() (Brian Geffon).
- Fix kerneldoc comments for swsusp_check() and swsusp_close() to
better match code (Christoph Hellwig).
- Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
capping driver to pr_debug() (Ville Syrjälä).
- Change the minimum python version for the intel_pstate_tracer utility
from 2.7 to 3.6 (Doug Smythies).
* pm-sleep:
PM: hibernate: fix the kerneldoc comment for swsusp_check() and swsusp_close()
PM: hibernate: Clean up sync_read handling in snapshot_write_next()
PM: sleep: Fix symbol export for _SIMPLE_ variants of _PM_OPS()
PM: hibernate: Use __get_safe_page() rather than touching the list
* powercap:
powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
* pm-tools:
tools/power/x86/intel_pstate_tracer: python minimum version
Broadwell-de has a consumer core and server uncore. The uncore_arb PMU
isn't present and the broadwellx style cbox PMU should be used
instead. Fix the tma_info_system_dram_bw_use metric to use the server
metric rather than client.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/111
Fixes: 7d124303d6 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926031034.1201145-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fix leak where mem_info__put wouldn't release the maps/map as used by
perf mem. Add exit functions and use elsewhere that the maps and map
are released.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Display code doesn't modify the branch_type_stat so switch uses to
const. This is done to aid refactoring struct callchain_list where
current the branch_type_stat is embedded even if not used.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Caught by address/leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 40826c45eb ("perf thread: Remove notion of dead threads")
removed dead threads but the list head wasn't removed. Remove it here.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Caught using reference count checking on perf top with
"--call-graph=lbr". After this no memory leaks were detected.
Fixes: 57849998e2 ("perf report: Add processing for cycle histograms")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Comparing pointers with reference count checking is tricky to avoid a
SEGV. Add a convenience macro to simplify and use.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Make the implicit REFCOUNT_CHECKING robust to when building with GCC.
Fixes: 9be6ab181b ("libperf rc_check: Enable implicitly with sanitizers")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running perf top with address sanitizer and "--call-graph=lbr" fails
due to reading sample 0 when no samples exist. Add a guard to prevent
this.
Fixes: e2b23483eb ("perf machine: Factor out lbr_callchain_add_lbr_ip()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Mutex error check will capture trying to take the lock recursively and
other problems that rwlock won't. At the expense of concurrency, adda
debug mode that uses a mutex in place of a rwsem.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To address this grep 3.8 warning:
grep: warning: stray \ before #
We needed to remove the '' around the grep expression and keep the \
before # so that it is escaped by the $(shell grep ...) and thus doesn't
get to grep.
We need that \ before the #, otherwise we get this:
Makefile.perf:364: *** unterminated call to function 'shell': missing ')'. Stop.
As everything after the # will be considered a comment.
Removing the single quotes needs some more escaping so that _some_ of
the escaped chars gets to grep, like the '\|' that becomes '\\\|´.
Running on debian:10, where there is no libtraceevent-devel available,
we get:
Makefile.perf:367: *** PYTHON_EXT_SRCS= util/python.c ../lib/ctype.c util/cap.c util/evlist.c util/evsel.c util/evsel_fprintf.c util/perf_event_attr_fprintf.c util/cpumap.c util/memswap.c util/mmap.c util/namespaces.c ../lib/bitmap.c ../lib/find_bit.c ../lib/list_sort.c ../lib/hweight.c ../lib/string.c ../lib/vsprintf.c util/thread_map.c util/util.c util/cgroup.c util/parse-branch-options.c util/rblist.c util/counts.c util/print_binary.c util/strlist.c ../lib/rbtree.c util/string.c util/symbol_fprintf.c util/units.c util/affinity.c util/rwsem.c util/hashmap.c util/perf_regs.c util/fncache.c util/perf-regs-arch/perf_regs_aarch64.c util/perf-regs-arch/perf_regs_arm.c util/perf-regs-arch/perf_regs_csky.c util/perf-regs-arch/perf_regs_loongarch.c util/perf-regs-arch/perf_regs_mips.c util/perf-regs-arch/perf_regs_powerpc.c util/perf-regs-arch/perf_regs_riscv.c util/perf-regs-arch/perf_regs_s390.c util/perf-regs-arch/perf_regs_x86.c. Stop.
make[1]: *** [Makefile.perf:242: sub-make] Error 2
I.e. both the comments and the util/trace-event.c were removed.
When using:
msg := $(error PYTHON_EXT_SRCS=$(PYTHON_EXT_SRCS))
While on the more recent fedora:38, with the new grep and make packages
and libtraceevent-devel installed:
Makefile.perf:367: *** PYTHON_EXT_SRCS= util/python.c ../lib/ctype.c util/cap.c util/evlist.c util/evsel.c util/evsel_fprintf.c util/perf_event_attr_fprintf.c util/cpumap.c util/memswap.c util/mmap.c util/namespaces.c ../lib/bitmap.c ../lib/find_bit.c ../lib/list_sort.c ../lib/hweight.c ../lib/string.c ../lib/vsprintf.c util/thread_map.c util/util.c util/cgroup.c util/parse-branch-options.c util/rblist.c util/counts.c util/print_binary.c util/strlist.c util/trace-event.c ../lib/rbtree.c util/string.c util/symbol_fprintf.c util/units.c util/affinity.c util/rwsem.c util/hashmap.c util/perf_regs.c util/fncache.c util/perf-regs-arch/perf_regs_aarch64.c util/perf-regs-arch/perf_regs_arm.c util/perf-regs-arch/perf_regs_csky.c util/perf-regs-arch/perf_regs_loongarch.c util/perf-regs-arch/perf_regs_mips.c util/perf-regs-arch/perf_regs_powerpc.c util/perf-regs-arch/perf_regs_riscv.c util/perf-regs-arch/perf_regs_s390.c util/perf-regs-arch/perf_regs_x86.c. Stop.
make[1]: *** [Makefile.perf:242: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
$
I.e. only the comments were removed.
If we build it on the same fedora:38 system, but using NO_LIBTRACEEVENT=1
$ make NO_LIBTRACEEVENT=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD) -C tools/perf install-bin
Makefile.perf:367: *** PYTHON_EXT_SRCS= util/python.c ../lib/ctype.c util/cap.c util/evlist.c util/evsel.c util/evsel_fprintf.c util/perf_event_attr_fprintf.c util/cpumap.c util/memswap.c util/mmap.c util/namespaces.c ../lib/bitmap.c ../lib/find_bit.c ../lib/list_sort.c ../lib/hweight.c ../lib/string.c ../lib/vsprintf.c util/thread_map.c util/util.c util/cgroup.c util/parse-branch-options.c util/rblist.c util/counts.c util/print_binary.c util/strlist.c ../lib/rbtree.c util/string.c util/symbol_fprintf.c util/units.c util/affinity.c util/rwsem.c util/hashmap.c util/perf_regs.c util/fncache.c util/perf-regs-arch/perf_regs_aarch64.c util/perf-regs-arch/perf_regs_arm.c util/perf-regs-arch/perf_regs_csky.c util/perf-regs-arch/perf_regs_loongarch.c util/perf-regs-arch/perf_regs_mips.c util/perf-regs-arch/perf_regs_powerpc.c util/perf-regs-arch/perf_regs_riscv.c util/perf-regs-arch/perf_regs_s390.c util/perf-regs-arch/perf_regs_x86.c. Stop.
make[1]: *** [Makefile.perf:242: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
$
Both comments and the util/trace-event.c file removed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZTj6mfM9UqY2DggC@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The hierarchy mode needs to setup output formats for each evsel.
Normally setup_sorting() handles this at the beginning, but it cannot
do that if data comes from a pipe since there's no evsel info before
reading the data. And then perf report cannot process the samples
in hierarchy mode and think as if there's no sample.
Let's check the condition and setup the output formats after reading
data so that it can find evsels.
Before:
$ ./perf record -o- true | ./perf report -i- --hierarchy -q
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
Error:
The - data has no samples!
After:
$ ./perf record -o- true | ./perf report -i- --hierarchy -q
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
94.76% true
94.76% [kernel.kallsyms]
94.76% [k] filemap_fault
5.24% perf-ex
5.24% [kernel.kallsyms]
5.06% [k] __memset
0.18% [k] native_write_msr
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20231025003121.2811738-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Currently lock contention timestamp is maintained in a hash map keyed by
pid. That means it needs to get and release a map element (which is
proctected by spinlock!) on each contention begin and end pair. This
can impact on performance if there are a lot of contention (usually from
spinlocks).
It used to go with task local storage but it had an issue on memory
allocation in some critical paths. Although it's addressed in recent
kernels IIUC, the tool should support old kernels too. So it cannot
simply switch to the task local storage at least for now.
As spinlocks create lots of contention and they disabled preemption
during the spinning, it can use per-cpu array to keep the timestamp to
avoid overhead in hashmap update and delete.
In contention_begin, it's easy to check the lock types since it can see
the flags. But contention_end cannot see it. So let's try to per-cpu
array first (unconditionally) if it has an active element (lock != 0).
Then it should be used and per-task tstamp map should not be used until
the per-cpu array element is cleared which means nested spinlock
contention (if any) was finished and it nows see (the outer) lock.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231020204741.1869520-3-namhyung@kernel.org
When pelem is NULL, it'd create a new entry with zero data. But it
might be preempted by IRQ/NMI just before calling bpf_map_update_elem()
then there's a chance to call it twice for the same pid. So it'd be
better to use BPF_NOEXIST flag and check the return value to prevent
the race.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231020204741.1869520-2-namhyung@kernel.org
It checks the current lock to calculated the delta of contention time.
The address is saved in the tstamp map which is allocated at begining of
contention and released at end of contention.
But it's possible for bpf_map_delete_elem() to fail. In that case, the
element in the tstamp map kept for the current lock and it makes the
next contention for the same lock tracked incorrectly. Specificially
the next contention begin will see the existing element for the task and
it'd just return. Then the next contention end will see the element and
calculate the time using the timestamp for the previous begin.
This can result in a large value for two small contentions happened from
time to time. Let's clear the lock address so that it can be updated
next time even if the bpf_map_delete_elem() failed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231020204741.1869520-1-namhyung@kernel.org
evsel__increase_rlimit() helper does nothing with evsel, and description
of the functionality is inaccurate, rename it and move to util/rlimit.c.
By the way, fix a checkppatch warning about misplaced license tag:
WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead
#160: FILE: tools/perf/util/rlimit.h:3:
/* SPDX-License-Identifier: LGPL-2.1 */
No functional change.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231023033144.1011896-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The -G/--cgroups option is to put sender and receiver in different
cgroups in order to measure cgroup context switch overheads.
Users need to make sure the cgroups exist and accessible. The following
example should the effect of this change. Please don't forget taskset
before the perf bench to measure cgroup switches properly. Otherwise
each task would run on a different CPU and generate cgroup switches
regardless of this change.
# perf stat -e context-switches,cgroup-switches \
> taskset -c 0 perf bench sched pipe -l 10000 > /dev/null
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000':
20,001 context-switches
2 cgroup-switches
0.053449651 seconds time elapsed
0.011286000 seconds user
0.041869000 seconds sys
# perf stat -e context-switches,cgroup-switches \
> taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB > /dev/null
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB':
20,001 context-switches
20,001 cgroup-switches
0.052768627 seconds time elapsed
0.006284000 seconds user
0.046266000 seconds sys
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20231017202342.1353124-1-namhyung@kernel.org
CoreSight might be not available, in such case, skip the tests.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: vmolnaro@redhat.com
Link: https://lore.kernel.org/r/20231019091137.22525-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This file was renamed from .txt to .rst and left a dangling reference.
Fix it.
Fixes: 151f4e2bdc ("docs: power: convert docs to ReST and rename to *.rst")
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
suspend/resume routines (Balsam Chihi)
- Fix probe for THERMAL_V2 for the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message in the max76620 driver when
thermal_of_zone_register() fails as the sub routine already show one
(Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible for the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() which is checking against
NULL instead of PTR_ERR() on the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in the thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl for the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for tegra124
(Rob Herring)
- Add mt7988 support for the Mediatek LVTS driver (Frank Wunderlich)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmU35s8ACgkQqDIjiipP
6E8nggf/VQei7x/fRTFRYJVyP6SdwzpZPcyMYEcwL50wpp/d/R5xapFzM7nofV6n
SYFXkpuejGH5d5JbJjpkv1S56Q/Bf6yy7cGciKiBmxaU2cWY636KmhlUPe2kfmX5
ipiNi/ZU0zAjZM7FRpBVPgp0HTvnGehDzIaSi6Y/vKVAw5TPTzjLz8oNoeHGP4/6
xNRgJuTwAvqL1lqZoo9YV7tVdkcuQamf3dkDkHqvSSL9UilHZEqrtLyh1Iz12+py
LESjlePz1jzK169oG5QiA4thIMV7CPTwkrkAJXwT2H2zWccg7JzZ7K1S3aJq2vHL
5UMcsUE2wCczfdnlhxD6wkJ3CDyirA==
=i0K9
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal control (ARM drivers mostly) updates for 6.7-rc1 from
Daniel Lezcano:
"- Add support for Mediatek LVTS MT8192 driver along with the
suspend/resume routines (Balsam Chihi)
- Fix probe for THERMAL_V2 for the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message in the max76620 driver when
thermal_of_zone_register() fails as the sub routine already show one
(Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible for the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() which is checking against
NULL instead of PTR_ERR() on the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in the thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl for the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for tegra124
(Rob Herring)
- Add mt7988 support for the Mediatek LVTS driver (Frank Wunderlich)"
* tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/qcom/tsens: Drop ops_v0_1
thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
thermal/drivers/mediatek: Fix probe for THERMAL_V2
thermal/drivers/max77620: Remove duplicate error message
dt-bindings: timer: add imx7d compatible
dt-bindings: net: microchip: Allow nvmem-cell usage
dt-bindings: imx-thermal: Add #thermal-sensor-cells property
dt-bindings: thermal: tsens: Add sa8775p compatible
thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
tools/thermal: Remove unused 'mds' and 'nrhandler' variables
dt-bindings: thermal: fsl,scu-thermal: Document imx8dl
thermal/drivers/imx8mm_thermal: Fix function pointer declaration by adding identifier name
dt-bindings: thermal: nvidia,tegra124-soctherm: Add missing unevaluatedProperties on child node schemas
thermal/drivers/mediatek/lvts_thermal: Add mt7988 support
thermal/drivers/mediatek/lvts_thermal: Make coeff configurable
dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
dt-bindings: thermal: mediatek: Add mt7988 lvts compatible
Add a minimal netlink helper library for the BPF selftests. This has been
taken and cut down and cleaned up from iproute2. This covers basics such
as netdevice creation which we need for BPF selftests / BPF CI given
iproute2 package cannot cover it yet.
Stanislav Fomichev suggested that this could be replaced in future by ynl
tool generated C code once it has RTNL support to create devices. Once we
get to this point the BPF CI would also need to add libmnl. If no further
extensions are needed, a second option could be that we remove this code
again once iproute2 package has support.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add support to dump BPF programs on netkit via bpftool. This includes both
the BPF link and attach ops programs. Dumped information contain the attach
location, function entry name, program ID and link ID when applicable.
Example with tc BPF link:
# ./bpftool net
xdp:
tc:
nk1(22) netkit/peer tc1 prog_id 43 link_id 12
[...]
Example with json dump:
# ./bpftool net --json | jq
[
{
"xdp": [],
"tc": [
{
"devname": "nk1",
"ifindex": 18,
"kind": "netkit/primary",
"name": "tc1",
"prog_id": 29,
"prog_flags": [],
"link_id": 8,
"link_flags": []
}
],
"flow_dissector": [],
"netfilter": []
}
]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-6-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add support to dump netkit link information to bpftool in similar way as
we have for XDP. The netkit link info only exposes the ifindex and the
attach_type.
Below shows an example link dump output, and a cgroup link is included for
comparison, too:
# bpftool link
[...]
10: cgroup prog 2466
cgroup_id 1 attach_type cgroup_inet6_post_bind
[...]
8: netkit prog 35
ifindex nk1(18) attach_type netkit_primary
[...]
Equivalent json output:
# bpftool link --json
[...]
{
"id": 10,
"type": "cgroup",
"prog_id": 2466,
"cgroup_id": 1,
"attach_type": "cgroup_inet6_post_bind"
},
[...]
{
"id": 12,
"type": "netkit",
"prog_id": 61,
"devname": "nk1",
"ifindex": 21,
"attach_type": "netkit_primary"
}
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This adds bpf_program__attach_netkit() API to libbpf. Overall it is very
similar to tcx. The API looks as following:
LIBBPF_API struct bpf_link *
bpf_program__attach_netkit(const struct bpf_program *prog, int ifindex,
const struct bpf_netkit_opts *opts);
The struct bpf_netkit_opts is done in similar way as struct bpf_tcx_opts
for supporting bpf_mprog control parameters. The attach location for the
primary and peer device is derived from the program section "netkit/primary"
and "netkit/peer", respectively.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Sync if_link uapi header to the latest version as we need the refresher
in tooling for netkit device. Given it's been a while since the last sync
and the diff is fairly big, it has been done as its own commit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f23 ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a vPMU test scenario to validate the userspace accesses for
the registers PM{C,I}NTEN{SET,CLR} and PMOVS{SET,CLR} to ensure
that KVM honors the architectural definitions of these registers
for a given PMCR.N.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-13-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a new test case to the vpmu_counter_access test to check
if PMU registers or their bits for unimplemented counters are not
accessible or are RAZ, as expected.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-12-rananta@google.com
[Oliver: fix issues relating to exception return address]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a new test case to the vpmu_counter_access test to check if PMU
registers or their bits for implemented counters on the vCPU are
readable/writable as expected, and can be programmed to count events.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-11-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Introduce vpmu_counter_access test for arm64 platforms.
The test configures PMUv3 for a vCPU, sets PMCR_EL0.N for the vCPU,
and check if the guest can consistently see the same number of the
PMU event counters (PMCR_EL0.N) that userspace sets.
This test case is done with each of the PMCR_EL0.N values from
0 to 31 (With the PMCR_EL0.N values greater than the host value,
the test expects KVM_SET_ONE_REG for the PMCR_EL0 to fail).
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-10-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
