Commit Graph

10 Commits

Author SHA1 Message Date
Daniel Mack
4aa78264d1 [ARM] pxa: use kzalloc() in pxa_init_gpio_chip()
As slab is available early now, use kzalloc() rather than
alloc_bootmem_low() in pxa_init_gpio_chip().

This removes the following boot time warning:

<4>------------[ cut here ]------------
<4>WARNING: at mm/bootmem.c:535 alloc_arch_preferred_bootmem+0x2c/0x54()
<d>Modules linked in:
[<c0029430>] (unwind_backtrace+0x0/0xdc) from [<c0036f64>] (warn_slowpath_common+0x4c/0x80)
[<c0036f64>] (warn_slowpath_common+0x4c/0x80) from [<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54)
[<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54) from [<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0)
[<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0) from [<c000f6e4>] (___alloc_bootmem+0xc/0x34)
[<c000f6e4>] (___alloc_bootmem+0xc/0x34) from [<c000cb20>] (pxa_init_gpio+0x48/0x228)
[<c000cb20>] (pxa_init_gpio+0x48/0x228) from [<c0009794>] (init_IRQ+0x34/0x44)
[<c0009794>] (init_IRQ+0x34/0x44) from [<c00089d4>] (start_kernel+0x144/0x264)
[<c00089d4>] (start_kernel+0x144/0x264) from [<a0008034>] (0xa0008034)
<4>---[ end trace 1b75b31a2719ed1c ]---

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-07-03 14:17:51 +08:00
Eric Miao
a27ba768a1 [ARM] pxa: add PWM devices support for pxa168/910
Signed-off-by: Mingwei Wang <mingwei.wang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:06 +08:00
Eric Miao
3852ac7113 [ARM] pxa: move pwm.c to common plat-pxa directory
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:04 +08:00
Eric Miao
f0a8370139 [ARM] pxa: move mach/i2c.h to plat/i2c.h
Signed-off-by: Paul Shen <paul.shen@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:01 +08:00
Eric Miao
a8f6faebaf [ARM] pxa: fix issue of muxed GPIO irq_chip functions touching non-muxed GPIOs
pxa_gpio_irq_type() and pxa_unmask_muxed_gpio() will touch non-muxed GPIOs
(0 and 1 on PXA2xx/PXA3xx) bits in GRERx and GFERx, which is incorrect.
Actually, only those bits should get updated if the corresponding bits are
set in c->irq_mask as well. Fix this by updating only those relevant bits.

Reported-and-tested-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-27 11:45:16 +08:00
Eric Miao
707b2c247c [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
arch/arm/plat-pxa/mfp.c is not intended to be use by PXA25x/PXA27x,
make it explicit here only for use by PXA3xx or ARCH_MMP.

Reported-by: Guennadi Liakhovestski <g.liakhovestski@gmx.de>
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-26 21:30:11 +08:00
Eric Miao
14c6b5e7ad [ARM] pxa: add base support for Marvell PXA910
Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:35 +08:00
Eric Miao
f8dec04d33 [ARM] pxa: move common MFP handling code into plat-pxa
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:34 +08:00
Eric Miao
38f539a608 [ARM] pxa: move common GPIO handling code into plat-pxa
1. add common GPIO handling code into [arch/arm/plat-pxa]

2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors
   should implement its own <mach/gpio.h>, provide the following required
   definitions and '#include <plat/gpio.h>' in the end:

   - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers'
     physical I/O memory

   - macros of GPLR(), GPSR(), GPDR() for constant optimization for
     functions gpio_{set,get}_value() (so that bit-bang code can still
     have tolerable performance)

   - NR_BUILTIN_GPIO for the number of onchip GPIO

   - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they
     can be either macros or inlined functions

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:33 +08:00
Eric Miao
bd5ce43323 [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support
1. introduce folder of 'arch/arm/plat-pxa' for common code across different
   PXA processor families

2. initially moved DMA code into plat-pxa

3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors
   should implement its own <mach/dma.h>, provide the following required
   definitions and '#include <plat/dma.h>' in the end:

   - DMAC_REGS_VIRT for mapped virtual address of the DMA registers'
     physical I/O memory

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:31 +08:00