Commit Graph

58 Commits

Author SHA1 Message Date
Linus Torvalds
42cf0f203e Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:

 - clang assembly fixes from Ard

 - optimisations and cleanups for Aurora L2 cache support

 - efficient L2 cache support for secure monitor API on Exynos SoCs

 - debug menu cleanup from Daniel Thompson to allow better behaviour for
   multiplatform kernels

 - StrongARM SA11x0 conversion to irq domains, and pxa_timer

 - kprobes updates for older ARM CPUs

 - move probes support out of arch/arm/kernel to arch/arm/probes

 - add inline asm support for the rbit (reverse bits) instruction

 - provide an ARM mode secondary CPU entry point (for Qualcomm CPUs)

 - remove the unused ARMv3 user access code

 - add driver_override support to AMBA Primecell bus

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (55 commits)
  ARM: 8256/1: driver coamba: add device binding path 'driver_override'
  ARM: 8301/1: qcom: Use secondary_startup_arm()
  ARM: 8302/1: Add a secondary_startup that assumes ARM mode
  ARM: 8300/1: teach __asmeq that r11 == fp and r12 == ip
  ARM: kprobes: Fix compilation error caused by superfluous '*'
  ARM: 8297/1: cache-l2x0: optimize aurora range operations
  ARM: 8296/1: cache-l2x0: clean up aurora cache handling
  ARM: 8284/1: sa1100: clear RCSR_SMR on resume
  ARM: 8283/1: sa1100: collie: clear PWER register on machine init
  ARM: 8282/1: sa1100: use handle_domain_irq
  ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver
  ARM: 8280/1: sa1100: switch to irq_domain_add_simple()
  ARM: 8279/1: sa1100: merge both GPIO irqdomains
  ARM: 8278/1: sa1100: split irq handling for low GPIOs
  ARM: 8291/1: replace magic number with PAGE_SHIFT macro in fixup_pv code
  ARM: 8290/1: decompressor: fix a wrong comment
  ARM: 8286/1: mm: Fix dma_contiguous_reserve comment
  ARM: 8248/1: pm: remove outdated comment
  ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X)
  ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX
  ...
2015-02-12 08:51:56 -08:00
Dmitry Eremin-Solenikov
1ff990c018 ARM: 8283/1: sa1100: collie: clear PWER register on machine init
Let kernel drivers to control wakeup sources instead of hardcoding them
in the collie.c board file.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-29 15:24:52 +00:00
Dmitry Eremin-Solenikov
dd45077799 arm: sa1100: move irda header to linux/platform_data
In the end asm/mach/irda.h header is not used by anybody except sa1100.
Move the header to the platform data includes dir and rename it to
irda-sa11x0.h.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30 18:44:07 -05:00
Dmitry Eremin-Solenikov
119acbd24c ARM: 8217/1: sa1100 collie: use gpio-charger instead of pda-power
Use gpio-charger driver instead of pda-power: it automatically cares
about used gpio and since collie does not differentiate between usb and
ac chargers, pda-power is an overkill for it.

As a bonus this allows us to remove gpio_to_irq calls from machine init
call - it is fragile. These gpio_to_irq calls will fail if gpios are
registered later, via device driver mechanisms.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-27 16:15:32 +00:00
Andrea Adami
3abe742339 ARM: 8085/1: sa1100: collie: add top boot mtd partition
The CFI mapping is now perfect so we can expose the top block, read only.
There isn't much to read, though, just the sharpsl_params values.

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29 10:29:34 +01:00
Andrea Adami
92183103d8 ARM: 8084/1: sa1100: collie: revert back to cfi_probe
Reverts commit d26b17edaf
ARM: sa1100: collie.c: fall back to jedec_probe flash detection

Unfortunately the detection was challenged on the defective unit used for tests:
one of the NOR chips did not respond to the CFI query.
Moreover that bad device needed extra delays on erase-suspend/resume cycles.

Tested personally on 3 different units and with feedback of two other users.

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29 10:29:33 +01:00
Dmitry Eremin-Solenikov
287d4d51e6 ARM: 7936/1: sa1100: collie: add support for IrDA transceiver
Collie has onboard IrDA transceiver controlled via active-low gpio. Add
corresponding platform data.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-12 10:36:05 +00:00
Dmitry Eremin-Solenikov
162e68c08c ARM: 7935/1: sa1100: collie: add gpio-keys configuration
collie has several GPIO lines that act like keys - Sync/Wakeup button on
dock station is connected to GPIO line. Another one is connected to
on/off button. Add corresponding gpio-keys configuration.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-11 15:34:32 +00:00
Andrea Adami
d26b17edaf ARM: sa1100: collie.c: fall back to jedec_probe flash detection
Zaurus collie contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16) and
at the moment cfi will not detect the collie NOR.
In the meanwhile we can revert to the jedec-probe map which has been
fixed with following commit:

mtd: jedec_probe: fix LH28F640BF definition
fe2f4c8e0b

Somehow this is unsatisfactory because the flash is mounted READ ONLY
(as from factory, with a RO cramfs)

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18 08:20:27 -07:00
Stephen Warren
6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Russell King
6920b5a791 ARM: move serial_sa1100.h header file to linux/platform_data
This is really driver platform data, so move it to the appropriate
directory.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-16 11:35:29 +00:00
Arnd Bergmann
a1fd844c6e ARM: sa1100: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the sa1100 include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jochen Friedrich <jochen@scram.de>
2012-09-14 11:18:57 +02:00
Shawn Guo
7fea1ba58e ARM: sa1100: use machine specific hook for late init
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08 20:36:34 +08:00
Paul Gortmaker
beca98c93d ARM: fix lcd power build failure in collie_defconfig
Commit 086ada54ab

  "FB: sa1100: remove global sa1100fb_.*_power function pointers"

got rid of all instances but one in locomolcd.c -- which was
conditional on CONFIG_SA1100_COLLIE.  The associated .power
field which replaces the global is populated in mach-sa1100/collie.c
so move the assignment there, but make it conditional on the
locomolcd support, so use CONFIG_BACKLIGHT_LOCOMO in that file.

Cc: arm@kernel.org
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-02 22:03:44 -07:00
Rob Herring
f314f33be7 ARM: 7342/2: sa1100: prepare for sparse irq conversion
In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine
and explicitly include mach/irqs.h as needed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-25 23:57:20 +01:00
Russell King
7256ecc2b7 Merge branch 'sa11x0-mcp' into sa11x0
Conflicts:
	arch/arm/mach-sa1100/assabet.c
	arch/arm/mach-sa1100/collie.c
	arch/arm/mach-sa1100/generic.c
	arch/arm/mach-sa1100/lart.c
	arch/arm/mach-sa1100/shannon.c
2012-03-25 23:57:10 +01:00
Russell King
18bbff9f67 Merge branch 'sa11x0-lcd' into sa11x0
Conflicts:
	arch/arm/mach-sa1100/assabet.c
2012-03-25 23:55:54 +01:00
Russell King
e1b7a72aeb FB: sa1100: move platform data to platform files
Move platform data out of the sa1100fb driver into the various
platform files themselves.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:19 +00:00
Russell King
abe06082d0 MFD: mcp/ucb1x00: separate ucb1x00 driver data from the MCP data
Patch taken from 5dd7bf59e0 (ARM: sa11x0: Implement autoloading of codec
and codec pdata for mcp bus.) by Jochen Friedrich <jochen@scram.de>.

This adds just the codec data part of the patch.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:30 +00:00
Russell King
a181099e2f ARM: sa11x0: convert to use DEFINE_RES_xxx macros
Convert StrongARM-11x0 platforms and core SoC code to use the
DEFINE_RES_xxx macros.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09 15:34:12 +00:00
Russell King
e36e26a8b7 MFD: mcp-sa11x0: move setup of PPC unit out of mcp-sa11x0.c
Patch taken from af9081ae64 (ARM: sa1100: Refactor mcp-sa11x0 to use
platform resources.) by Jochen Friedrich <jochen@scram.de>, and
consolidated to use a common function.

Move the setup of the PPC unit out of mcp-sa11x0 into the core SA11x0
code, and call it from each platforms initialization file.  This
centralizes the setup of the PPC unit while not polluting the mcp-sa11x0
driver with these details.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-03 17:38:02 +00:00
Russell King
9a95b9e741 Merge branch 'sa11x0-mcp-fixes' into fixes 2012-01-26 21:06:54 +00:00
Russell King
65f2e753f1 Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus."
This reverts commit 5dd7bf59e0.

Conflicts:

	scripts/mod/file2alias.c

This change is wrong on many levels.  First and foremost, it causes a
regression.  On boot on Assabet, which this patch gives a codec id of
'ucb1x00', it gives:

	ucb1x00 ID not found: 1005

0x1005 is a valid ID for the UCB1300 device.

Secondly, this patch is way over the top in terms of complexity.  The
only device which has been seen to be connected with this MCP code is
the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same
driver.  Adding a match table, requiring the codec string to match the
hardware ID read out of the ID register, etc is completely over the top
when we can just read the hardware ID register.
2012-01-20 17:38:58 +00:00
Russell King
216f63c41c Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources."
This reverts commit af9081ae64.

This revert is necessary to revert 5dd7bf59e0.
2012-01-20 17:37:21 +00:00
Russell King
5f76559a77 ARM: sa11x0: fix collie build error
f408c985ce (GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion)
made gpio_to_irq() a function.  This breaks collie where it's used to
initialize some static data.  Fix that by moving the initialization to
the init code.

arch/arm/mach-sa1100/collie.c:139: error: initializer element is not constant
arch/arm/mach-sa1100/collie.c:139: error: (near initialization for 'collie_power_resource[0].start')
arch/arm/mach-sa1100/collie.c:140: error: initializer element is not constant
arch/arm/mach-sa1100/collie.c:140: error: (near initialization for 'collie_power_resource[0].end')

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19 17:26:27 +00:00
Linus Torvalds
21ebd6c68b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  rtc: max8925: Add function to work as wakeup source
  mfd: Add pm ops to max8925
  mfd: Convert aat2870 to dev_pm_ops
  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
  mfd: Introduce missing kfree in 88pm860x probe routine
  mfd: Add S5M series configuration
  mfd: Add s5m series irq driver
  mfd: Add S5M core driver
  mfd: Improve mc13xxx dt binding document
  mfd: Fix stmpe section mismatch
  mfd: Fix stmpe build warning
  mfd: Fix STMPE I2c build failure
  mfd: Constify aat2870-core i2c_device_id table
  gpio: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 610
  mfd: Add support for STMPE SPI interface
  mfd: Separate out STMPE controller and interface specific code
  misc: Remove max8997-muic sysfs attributes
  mfd: Remove unused wm831x_irq_data_to_mask_reg()
  ...

Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-13 20:43:32 -08:00
Jochen Friedrich
af9081ae64 ARM: sa1100: Refactor mcp-sa11x0 to use platform resources.
Make use of memory resources rather than hardcoded IO adresses.
This is a first step towards DT support.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09 00:37:34 +01:00
Jochen Friedrich
5dd7bf59e0 ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09 00:37:33 +01:00
Russell King
d9ca5839fd ARM: restart: sa1100: use new restart hook
Hook these platforms restart code into the new restart hook rather
than using arch_reset().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05 12:57:19 +00:00
Paul Gortmaker
9e54d33fbf arm: fix implicit use of page.h in several arch/arm files
Add the include to fix things like this:

arch/arm/mach-sa1100/jornada720.c:278: error: 'PAGE_SHIFT' undeclared here (not in a function)
arch/arm/mach-bcmring/mm.c:32: error: 'PAGE_SHIFT' undeclared here (not in a function)
arch/arm/mach-sa1100/collie.c:361: error: 'PAGE_SHIFT' undeclared here (not in a function)

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:46 -04:00
Dmitry Eremin-Solenikov
34cd2d38db ARM: 6658/1: collie: do actually pass locomo_info to locomo driver
locomo_info isn't actually used as a platform_data on collie platform:
 arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used

So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the
driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11 22:53:40 +00:00
Nicolas Pitre
6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Pavel Machek
a2531293db update email address
pavel@suse.cz no longer works, replace it with working address.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-19 10:56:54 +02:00
Eric Miao
ac609d266e [ARM] locomo: allow cascaded IRQ base to be specified by platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:50 +08:00
Russell King
ba71e17269 Merge branch 'for-lak' of git://git.linuxtogo.org/home/thesing/collie into sa1100 2009-12-06 16:53:12 +00:00
Russell King
7a5b4e16c8 ARM: sa11x0: convert set_xxx_data() to register_xxx()
Only register devices if we have platform data for those which require
platform data.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06 16:52:23 +00:00
Thomas Kunze
9823b2d0f9 collie: support pda_power driver
This add the pda-power platform device to collie.
2009-11-27 21:07:24 +01:00
Thomas Kunze
f7177c8452 collie: convert to gpiolib for ucb1x00
Only the parts used for collie_battery are converted.
The rest will be cleaned up later.
2009-11-27 21:07:22 +01:00
Thomas Kunze
1d0ad843b0 collie: prepare for gpiolib use
prefix gpio definitions for direct register access with '_' so we
can use the other names for gpio_request & co
2009-11-27 21:07:16 +01:00
Thomas Kunze
f151ccf76b collie: fix scoop convesion to new api 2009-11-27 21:07:15 +01:00
Russell King
e63cedb656 [ARM] collie: fix two minor formatting nits
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:15:00 +00:00
Dmitry Baryshkov
224be092d1 [ARM] 5429/1: collie: start scoop converton to new api
Start converting scoop gpio access to new API instead of old
deprecated one.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:13:56 +00:00
Kristoffer Ericson
93982535a2 [ARM] 5336/1: Formatting/Whitespace cleanups in mach-sa1100
This patch fixes bad formatting found in
mach-sa1100 files.

What it does is to replace/delete things like
excessive spaces (start || endline). The code
looks the same just alot less junk.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01 17:22:45 +00:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King
be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Thomas Kunze
864d0ec9db [ARM] 5025/2: fix collie cpu initialisation
collie.h:
     * add some meaningfull names to some gpios
collie.c:
    * initialize cpu registers correctly

Signed-off-by: Thomas Kunze <thommycheck@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 14:03:20 +01:00
Richard Purdie
8d48427ecb [ARM] 3847/2: Convert LOMOMO to use struct device for GPIOs
Convert LOMOMO to use struct device * for GPIOs instead of struct
locomo_dev. This enables access to the GPIOs from code which is not
a locomo device itself (such as audio). Access for gpio 31 is removed
for error handling (no such hardware exists).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:58:59 +01:00
Pavel Machek
b94ea6c08d [ARM] 3727/1: fix ucb initialization on collie
Patch from Pavel Machek

From: Dirk Opfer <Dirk@Opfer-Online.de>

Fix ucb initialization on collie. Wrong frequency was used and that
led to things not working quite correctly. (I had to actually disable
checks in my tree to get it to boot). It now includes all the
neccessary parts to get it to compile :-).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-11 22:54:15 +01:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Pavel Machek
50c37e2161 [ARM] 3436/1: 2.6.16-git18: collie_defconfig broken
Patch from Pavel Machek

> The kautobuild found the following error while trying to build 2.6.16-git18
> using collie_defconfig:
>
> arch/arm/mach-sa1100/collie.c:92: error: 'collie_uart_set_mctrl' undeclared here (not in a function)
> arch/arm/mach-sa1100/collie.c:93: error: 'collie_uart_get_mctrl' undeclared here (not in a function)
> make[1]: *** [arch/arm/mach-sa1100/collie.o] Error 1
> make: *** [arch/arm/mach-sa1100] Error 2
> make: Leaving directory `/var/tmp/kernel-orig'

This fixes above compile error by adding missing pieces of uart
support, and fixes compilation.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 12:13:31 +01:00