This ensures that the sense/prio lists are sorted at registration time,
enabling us to use a simple binary search for an optimized lookup
(something that had been on the TODO for some time).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
intc_set_affinity() updates the cpumask in place, so there's no need for
the upper layer to do this itself.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
It's possible to use IRQCHIP_SKIP_SET_WAKE to get the behaviour that
we're after, without having to bother with a dummy ->set_wake() callback
for the IRQ chip.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: bcm5974 - set BUTTONPAD property
Input: serio_raw - return proper result when serio_raw_write fails
Input: serio_raw - really signal HUP upon disconnect
Input: serio_raw - remove stray semicolon
Input: revert some over-zealous conversions to module_platform_driver()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
FUSE: Notifying the kernel of deletion.
fuse: support ioctl on directories
fuse: Use kcalloc instead of kzalloc to allocate array
fuse: llseek optimize SEEK_CUR and SEEK_SET
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJPDmxIAAoJENkgDmzRrbjxjZAP/00I83SuAfx8aDDgPB8o0Sv2
9xI8ZhYIu0S8KfT8tu6Sl7pww7VoTP6gBm/cySnrOw1a3diWjhT5Xa3EVHIicWSV
CWyCZK5cbTmPl2/NPs5cWbzrMGdSWotZN/7cCaKVQ5z43+uvRBLJj8s8LT5epzdA
hGJZ5FDX01kQamrTdITIDpRJgMcO0A5e2rPNYQavJFf1SFZR5sdRmeyB8BqOmlyL
r2cC13cNsHvyKc+xPZd0X96geslAah5XMJJacTMh9qaw1K/hyv5715iYciKANPEH
5+XKzb2gGIX9H2qOMklB/sngA+pEczfO9SD0oM21PyVzZPfWcl8xHkCJq1R1VMTS
vSCwvg/g9hBW6RgW3c3VE1b6usrLUbcaO1dzR1e5A7tPE48QZBzdi6CiJsWYlPPe
gIOU7MDjmRGSiryOetzj9Rp0jAJvLiD7DXNn9brQzbNaTKi6BvIEWxgKVYzXr8bk
pE9j8dNPU8TCBEQsrVNHKrgHL2Um8Mpbi8fzdzwi8odG7Ucu7oWKzsBiGkBiNB0B
5swRrUGDgiMkElLn6rwdg+lSrtZyzWEGZe3bd+4ATD0vhTt3p8oGCFtTwTtz6yfW
WhkzsToQA/EFR0JzaFkH9t1mnxTKTGli83cKVnljIP69Q3W5Bby8aTgkI2giAJkW
q+rPPmt3v5BY3rYwTgFe
=dgrs
-----END PGP SIGNATURE-----
Merge tag 'to-linus' of git://github.com/rustyrussell/linux
* tag 'to-linus' of git://github.com/rustyrussell/linux: (24 commits)
lguest: Make sure interrupt is allocated ok by lguest_setup_irq
lguest: move the lguest tool to the tools directory
lguest: switch segment-voodoo-numbers to readable symbols
virtio: balloon: Add freeze, restore handlers to support S4
virtio: balloon: Move vq initialization into separate function
virtio: net: Add freeze, restore handlers to support S4
virtio: net: Move vq and vq buf removal into separate function
virtio: net: Move vq initialization into separate function
virtio: blk: Add freeze, restore handlers to support S4
virtio: blk: Move vq initialization to separate function
virtio: console: Disable callbacks for virtqueues at start of S4 freeze
virtio: console: Add freeze and restore handlers to support S4
virtio: console: Move vq and vq buf removal into separate functions
virtio: pci: add PM notification handlers for restore, freeze, thaw, poweroff
virtio: pci: switch to new PM API
virtio_blk: fix config handler race
virtio: add debugging if driver doesn't kick.
virtio: expose added descriptors immediately.
virtio: avoid modulus operation.
virtio: support unlocked queue kick
...
It appears that you can only read the sprom contents with aligned 16-bit
reads: anything else causes at least some versions of the broadcom
chipset to abort the PCI transaction, returning 0xff.
This apparently doesn't trigger very often, because most setups don't
use an external srom chip, and the OTP sprom loading doesn't have this
issue. But at least the current 11" Macbook Air does trigger it, and
wireless communications were broken as a result.
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This very noisy sparse warning appears on almost every file in the
kernel:
CHECK init/main.c
arch/x86/include/asm/thread_info.h:43:55: error: dubious one-bit signed bitfield
arch/x86/include/asm/thread_info.h:44:46: error: dubious one-bit signed bitfield
This patch changes sig_on_uaccess_error and uaccess_err flags to unsigned
type and thus fixes the warning.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits)
ASoC: twl6040 - Add method to query optimum PDM_DL1 gain
ALSA: hda - Fix the lost power-setup of seconary pins after PM resume
ALSA: usb-audio: add Yamaha MOX6/MOX8 support
ALSA: virtuoso: add S/PDIF input support for all Xonars
ALSA: ice1724 - Support for ooAoo SQ210a
ALSA: ice1724 - Allow card info based on model only
ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations
ALSA: hdspm - Provide unique driver id based on card serial
ASoC: Dynamically allocate the rtd device for a non-empty release()
ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC
ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs
ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs
ALSA: hda - Use auto-parser for HP laptops with cx20459 codec
ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info()
ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref()
ALSA: hda/cirrus - support for iMac12,2 model
ASoC: cx20442: add bias control over a platform provided regulator
ALSA: usb-audio - Avoid flood of frame-active debug messages
ALSA: snd-usb-us122l: Delete calls to preempt_disable
mfd: Put WM8994 into cache only mode when suspending
...
Fix up trivial conflicts in:
- arch/arm/mach-s3c64xx/mach-crag6410.c:
renamed speyside_wm8962 to tobermory, added littlemill right
next to it
- drivers/base/regmap/{regcache.c,regmap.c}:
duplicate diff that had already come in with other changes in
the regmap tree
We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile
already depends on CONFIG_PCI=y, so this patch just adds the dependency
on CONFIG_AMD_NB.
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org # 2.6.34+ (needs adjustment for k8 -> amd rename)
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
iEYEABECAAYFAk8Obj8ACgkQGkmNcg7/o7hzngCfS5az4ZP3D+e/cvatHZm/nAzn
0mIAoKbYyXpLXGkEN+yDkd5YZAYwQjVR
=kryV
-----END PGP SIGNATURE-----
Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh
SH/R-Mobile updates for 3.3 merge window.
* tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: (32 commits)
arm: mach-shmobile: add a resource name for shdma
ARM: mach-shmobile: r8a7779 SMP support V3
ARM: mach-shmobile: Add kota2 defconfig.
ARM: mach-shmobile: Add marzen defconfig.
ARM: mach-shmobile: r8a7779 power domain support V2
ARM: mach-shmobile: Fix up marzen build for recent GIC changes.
ARM: mach-shmobile: r8a7779 PFC function support
ARM: mach-shmobile: Flush caches in platform_cpu_die()
ARM: mach-shmobile: Allow SoC specific CPU kill code
ARM: mach-shmobile: Fix headsmp.S code to use CPUINIT
ARM: mach-shmobile: clock-r8a7779: clkz/clkzs support
ARM: mach-shmobile: clock-r8a7779: add DIV4 clock support
ARM: mach-shmobile: Marzen LAN89218 support
ARM: mach-shmobile: Marzen SCIF2/SCIF4 support
ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2
ARM: mach-shmobile: r8a7779 and Marzen base support V2
sh: pfc: Unlock register support
sh: pfc: Variable bitfield width config register support
sh: pfc: Add config_reg_helper() function
sh: pfc: Convert index to field and value pair
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
iEYEABECAAYFAk8ObfwACgkQGkmNcg7/o7gOHwCfZo8197ppks1LIfACo27cL8Q8
rU8AnR+igHfCEkg9RlrX9sJ8jqxtpYLZ
=WE1M
-----END PGP SIGNATURE-----
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
SuperH updates for 3.3 merge window.
* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (38 commits)
sh: magicpanelr2: Update for parse_mtd_partitions() fallout.
sh: mach-rsk: Update for parse_mtd_partitions() fallout.
sh: sh2a: Improve cache flush/invalidate functions
sh: also without PM_RUNTIME pm_runtime.o must be built
sh: add a resource name for shdma
sh: Remove redundant try_to_freeze() invocations.
sh: Ensure IRQs are enabled across do_notify_resume().
sh: Fix up store queue code for subsys_interface changes.
sh: clkfwk: sh_clk_init_parent() should be called after clk_register()
sh: add platform_device for renesas_usbhs in board-sh7757lcr
sh: modify clock-sh7757 for renesas_usbhs
sh: pfc: ioremap() support
sh: use ioread32/iowrite32 and mapped_reg for div6
sh: use ioread32/iowrite32 and mapped_reg for div4
sh: use ioread32/iowrite32 and mapped_reg for mstp32
sh: extend clock struct with mapped_reg member
sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT()
sh: clkfwk: clock-sh7724: all div6_clks use SH_CLK_DIV6_EXT()
sh: clock-sh7723: add CLKDEV_ICK_ID for cleanup
serial: sh-sci: Handle GPIO function requests.
...
Make sure the interrupt is allocated correctly by lguest_setup_irq (check the
return value of irq_alloc_desc_at for -ENOMEM)
Signed-off-by: Stratos Psomadakis <psomas@cslab.ece.ntua.gr>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleanups and commentry)
This is a better location instead of having it in Documentation.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (fixed compile)
When studying lguest's x86 segment descriptor code, it is not longer
necessary to have the Intel x86 architecture manual open on the page
with the segment descriptor illustration to understand the crazy
numbers assigned to both descriptor structure halves a/b.
Now the struct desc_struct's fields, like suggested by
Glauber de Oliveira Costa in 2008, are used.
Signed-off-by: Jacek Galowicz <jacek@galowicz.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Handling balloon hibernate / restore is tricky. If the balloon was
inflated before going into the hibernation state, upon resume, the host
will not have any memory of that. Any pages that were passed on to the
host earlier would most likely be invalid, and the host will have to
re-balloon to the previous value to get in the pre-hibernate state.
So the only sane thing for the guest to do here is to discard all the
pages that were put in the balloon. When to discard the pages is the
next question.
One solution is to deflate the balloon just before writing the image to
the disk (in the freeze() PM callback). However, asking for pages from
the host just to discard them immediately after seems wasteful of
resources. Hence, it makes sense to do this by just fudging our
counters soon after wakeup. This means we don't deflate the balloon
before sleep, and also don't put unnecessary pressure on the host.
This also helps in the thaw case: if the freeze fails for whatever
reason, the balloon should continue to remain in the inflated state.
This was tested by issuing 'swapoff -a' and trying to go into the S4
state. That fails, and the balloon stays inflated, as expected. Both
the host and the guest are happy.
Finally, in the restore() callback, we empty the list of pages that were
previously given off to the host, add the appropriate number of pages to
the totalram_pages counter, reset the num_pages counter to 0, and
all is fine.
As a last step, delete the vqs on the freeze callback to prepare for
hibernation, and re-create them in the restore and thaw callbacks to
resume normal operation.
The kthread doesn't race with any operations here, since it's frozen
before the freeze() call and is thawed after the thaw() and restore()
callbacks, so we're safe with that.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The probe and PM restore functions will share this code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Remove all the vqs, disable napi and detach from the netdev on
hibernation.
Re-create vqs after restoring from a hibernated image, re-enable napi
and re-attach the netdev. This keeps networking working across
hibernation.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The remove and PM freeze functions will share this code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The probe and PM restore functions will share this code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Delete the vq and flush any pending requests from the block queue on the
freeze callback to prepare for hibernation.
Re-create the vq in the restore callback to resume normal function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The probe and PM restore functions will share this code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To ensure we don't receive any more interrupts from the host after we
enter the freeze function, disable all vq interrupts.
There wasn't any problem seen due to this in tests, but applying this
patch makes the freeze case more robust.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Remove all vqs and associated buffers in the freeze callback which
prepares us to go into hibernation state. On restore, re-create all the
vqs and populate the input vqs with buffers to get to the pre-hibernate
state.
Note: Any outstanding unconsumed buffers are discarded; which means
there's a possibility of data loss in case the host or the guest didn't
consume any data already present in the vqs. This can be addressed in a
later patch series, perhaps in virtio common code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This common code will be shared with the PM freeze function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Handle thaw, restore and freeze notifications from the PM core. Expose
these to individual virtio drivers that can quiesce and resume vq
operations. For drivers not implementing the thaw() method, use the
restore method instead.
These functions also save device-specific data so that the device can be
put in pre-suspend state after resume, and disable and enable the PCI
device in the freeze and resume functions, respectively.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The older PM API doesn't have a way to get notifications on hibernate
events. Switch to the newer one that gives us those notifications.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fix a theoretical race related to config work
handler: a config interrupt might happen
after we flush config work but before we
reset the device. It will then cause the
config work to run during or after reset.
Two problems with this:
- if this runs after device is gone we will get use after free
- access of config while reset is in progress is racy
(as layout is changing).
As a solution
1. flush after reset when we know there will be no more interrupts
2. add a flag to disable config access before reset
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Under the existing #ifdef DEBUG, check that they don't have more than
1/10 of a second between an add_buf() and a
virtqueue_notify()/virtqueue_kick_prepare() call.
We could get false positives on a really busy system, but good for
development.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A virtio driver does virtqueue_add_buf() multiple times before finally
calling virtqueue_kick(); previously we only exposed the added buffers
in the virtqueue_kick() call. This means we don't need a memory
barrier in virtqueue_add_buf(), but it reduces concurrency as the
device (ie. host) can't see the buffers until the kick.
In the unusual (but now possible) case where a driver does add_buf()
and get_buf() without doing a kick, we do need to insert one before
our counter wraps. Otherwise we could wrap num_added, and later on
not realize that we have passed the marker where we should have
kicked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we know vq->vring.num is a power of 2, modulus is lazy (it's asserted
in vring_new_virtqueue()).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Based on patch by Christoph for virtio_blk speedup:
Split virtqueue_kick to be able to do the actual notification
outside the lock protecting the virtqueue. This patch was
originally done by Stefan Hajnoczi, but I can't find the
original one anymore and had to recreated it from memory.
Pointers to the original or corrections for the commit message
are welcome.
Stefan's patch was here:
a6d06644e3http://www.spinics.net/lists/linux-virtualization/msg14616.html
Third time's the charm!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Remove wrapper functions. This makes the allocation type explicit in
all callers; I used GPF_KERNEL where it seemed obvious, left it at
GFP_ATOMIC otherwise.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The old documentation is left over from when we used a structure with
strategy pointers.
And move the documentation to the C file as per kernel practice.
Though I disagree...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Trivial changes to remove forgotten junk, format comments, and correct names.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were cheating with our barriers; using the smp ones rather than the
real device ones. That was fine, until rpmsg came along, which is
used to talk to a real device (a non-SMP CPU).
Unfortunately, just putting back the real barriers (reverting
d57ed95d) causes a performance regression on virtio-pci. In
particular, Amos reports netbench's TCP_RR over virtio_net CPU
utilization increased up to 35% while throughput went down by up to
14%.
By comparison, this branch is in the noise.
Reference: https://lkml.org/lkml/2011/12/11/22
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The RSK+ setup code was doing some pretty dubious things with
parse_mtd_partitions() in order to populate the physmap-flash map
platform data. The physmap-flash driver contains all of the functionality
that we require already, so simply drop the special casing and pad out
the platform data accordingly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The cache functions lock out interrupts for long periods; this patch
reduces the impact when operating on large address ranges. In such
cases it will:
- Invalidate the entire cache rather than individual addresses.
- Do nothing when flushing the operand cache in write-through mode.
- When flushing the operand cache in write-back mdoe, index the
search for matching addresses on the cache entires instead of the
addresses to flush
Note: sh2a__flush_purge_region was only invalidating the operand
cache, this adds flush.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
When CONFIG_PM_RUNTIME is off, drivers/sh/pm_runtime.o still has to be
built on sh platforms, because then it provides means to statically
switch on device PM clocks.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
