In function_graph_enter() there's a loop that looks at fgraph_array[]
elements which are fgraph_ops. It first tests if it is a fgraph_stub op,
and if so skips it, as that's just there as a place holder. Then it checks
the fgraph_ops filters to see if the ops wants to trace the current
function.
But if the compiler reloads the fgraph_array[] after the check against
fgraph_stub, it could race with the fgraph_array[] being updated with the
fgraph_stub. That would cause the stub to be processed. But the stub has a
null "func_hash" field which will cause a NULL pointer dereference.
Add a READ_ONCE() so that the gops that is compared against the
fgraph_stub is also the gops that is processed later.
Link: https://lore.kernel.org/all/CA+G9fYsSVJQZH=nM=1cjTc94PgSnMF9y65BnOv6XSoCG_b6wmw@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240613095223.1f07e3a4@rorschach.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add the description to the parameters addr and free_filters
of the function unregister_ftrace_direct().
Link: https://lore.kernel.org/linux-trace-kernel/20240606132520.1397567-1-marilene.agarcia@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Marilene A Garcia <marilene.agarcia@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Yang Li sent a patch to fix the kerneldoc of ftrace_graph_ret_addr().
While reviewing it, I realized that the comments in the entire function
header needed a rewrite. When doing that, I realized that @idx parameter
was being ignored. Every time this was called by the unwinder, it would
start the loop at the top of the shadow stack and look for the matching
stack pointer. When it found it, it would return it. When the unwinder
asked for the next function, it would search from the beginning again.
In reality, it should start from where it left off. That was the reason
for the @idx parameter in the first place. The first time the unwinder
calls this function, the @idx pointer would contain zero. That would mean
to start from the top of the stack. The function was supposed to update
the @idx with the index where it found the return address, so that the
next time the unwinder calls this function it doesn't have to search
through the previous addresses it found (making it O(n^2)!).
This speeds up the unwinder's use of ftrace_graph_ret_addr() by an order
of magnitude.
Link: https://lore.kernel.org/linux-trace-kernel/20240610181746.656e3759@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240611031737.821995106@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reported-by: Yang Li <yang.lee@linux.alibaba.com>
Fixes: 7aa1eaef9f ("function_graph: Allow multiple users to attach to function graph")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When CONFIG_DYNAMIC_FTRACE is not set, the function
fgraph_update_pid_func() doesn't do anything. Currently, most of its logic
is within a "#ifdef CONFIG_DYNAMIC_FTRACE" block, but its variables were
declared outside that, and when DYNAMIC_FTRACE is not set, it produces
unused variable warnings.
Instead, just place it (and the helper function fgraph_pid_func()) within
the #ifdef block and have the header file use a empty stub function for
when DYNAMIC_FTRACE is not defined.
Link: https://lore.kernel.org/linux-trace-kernel/20240607094833.6a787d73@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406071806.BRjaC5FF-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function_graph selftests checks various size variables to pass from
the entry of the function to the exit. It tests 1, 2, 4 and 8 byte words.
The 1 byte macro was called BYTE_NUMBER but that is used in the sh
architecture: arch/sh/include/asm/bitops-op32.h
Just rename the macro to CHAR_NUMBER.
Link: https://lore.kernel.org/linux-trace-kernel/20240606081846.4cb82dc4@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 47c3c70aa3 ("function_graph: Add selftest for passing local variables")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406061744.rZDXfRrG-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
These functions are defined in the fgraph.c file, but not
called elsewhere, so delete these unused functions.
kernel/trace/fgraph.c:273:1: warning: unused function 'set_bitmap_bits'.
kernel/trace/fgraph.c:259:19: warning: unused function 'get_fgraph_type'.
Link: https://lore.kernel.org/linux-trace-kernel/20240606021053.27783-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9289
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On setting set_ftrace_pid, a extra entry generated by ftrace_pid_func()
is shown on stack trace(CONFIG_UNWINDER_FRAME_POINTER=y).
[004] ..... 68.459382: <stack trace>
=> 0xffffffffa00090af
=> ksys_read
=> __x64_sys_read
=> x64_sys_call
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
To resolve this issue, increment skip count
in function_stack_trace_call() if pids are set.
Link: https://lore.kernel.org/linux-trace-kernel/20240528032604.6813-3-tatsuya.s2862@gmail.com
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
[ Rebased to current tree ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace subops is only defined if CONFIG_DYNAMIC_FTRACE is enabled. If
it is not, function tracing is extremely limited, and the subops in the
ftrace_ops structure is not defined (and will fail to compile). If
DYNAMIC_FTRACE is not enabled, then function graph filtering will not
work (as it shouldn't).
Link: https://lore.kernel.org/linux-trace-kernel/20240605202709.096020676@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: df3ec5da6a ("function_graph: Add pid tracing back to function graph tracer")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406051855.9VIYXbTB-lkp@intel.com/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The static branch key "fgraph_do_direct" was not declared static but is
only used in one file. Change it to a static variable.
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.936515302@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406051711.dS1sQZ9n-lkp@intel.com/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace_startup_subops() was in the wrong header, and both functions
were not defined on !CONFIG_DYNAMIC_FTRACE.
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.773583114@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406051524.a12JqLqx-lkp@intel.com/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use rcu_assign_ptr() to assign the list pointer as it is marked as RCU,
and this quiets the sparse warning:
kernel/trace/ftrace.c:313:23: warning: incorrect type in assignment (different address spaces)
kernel/trace/ftrace.c:313:23: expected struct ftrace_ops [noderef] __rcu *
kernel/trace/ftrace.c:313:23: got struct ftrace_ops *
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.613471310@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use a type cast to convert ftrace_list_end to RCU when assigning
ftrace_ops_list. This will quiet the sparse warning:
kernel/trace/ftrace.c:125:59: warning: incorrect type in initializer (different address spaces)
kernel/trace/ftrace.c:125:59: expected struct ftrace_ops [noderef] __rcu *[addressable] [toplevel] ftrace_ops_list
kernel/trace/ftrace.c:125:59: got struct ftrace_ops *
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.450784356@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Sparse complains that function_trace_op is not static but is not declared
in a header file. It is used only in assembly code. But add it to a header
so that sparse no longer complains:
kernel/trace/ftrace.c:99:19: warning: symbol 'function_trace_op' was not declared. Should it be static?
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.289105647@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Describe what ftrace_hash_move() does and add some more comments to some
other functions to make it easier to understand.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180409.179520305@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The parameter "inc" in the function ftrace_hash_rec_update_modify() is
boolean. Change it to be such.
Also add documentation to what the function does.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180409.021080462@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add comments to describe what the functions ftrace_hash_rec_disable() and
ftrace_hash_rec_enable() do. Also change the passing of the "inc" variable
to __ftrace_hash_rec_update() to a boolean value as that is what it is
supposed to take.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180408.857333430@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
While adding comments to the function __ftrace_hash_rec_update() and
trying to describe in detail what the parameter for "filter_hash" does, I
realized that it basically does exactly the same thing (but differently)
if it is set or not!
If it is set, the idea was the ops->filter_hash was being updated, and the
code should focus on the functions that are in the ops->filter_hash and
add them. But it still had to pay attention to the functions in the
ops->notrace_hash, to ignore them.
If it was cleared, it focused on the ops->notrace_hash, and would add
functions that were not in the ops->notrace_hash but would still keep
functions in the "ops->filter_hash". Basically doing the same thing.
In reality, the __ftrace_hash_rec_update() only needs to either remove the
functions associated to the give ops (if "inc" is set) or remove them (if
"inc" is cleared). It has to pay attention to both the filter_hash and
notrace_hash regardless.
Remove the "filter_hash" parameter from __filter_hash_rec_update() and
comment the function for what it really is doing.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180408.691995506@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The name "dup_hash()" is a misnomer as it does not duplicate the hash that
is passed in, but instead moves its entities from that hash to a newly
allocated one. Rename it to "__move_hash()" (using starting underscores as
it is an internal function), and add some comments about what it does.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180408.537723591@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The pid filtering test will set the pid filters and make sure that both
function and function_graph tracing honors the filters. But the
function_graph tracer test was failing because the PID was not being
filtered properly. That's because the funcgraph-proc option wasn't getting
set. Without that option the PID is not shown.
Instead we get:
+ cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
3) ! 143.685 us | kernel_clone();
3) ! 127.055 us | kernel_clone();
1) ! 127.170 us | kernel_clone();
3) ! 126.840 us | kernel_clone();
When we should be getting:
+ cat trace
# tracer: function_graph
#
# CPU TASK/PID DURATION FUNCTION CALLS
# | | | | | | | | |
4) bash-939 | # 1070.009 us | kernel_clone();
4) bash-939 | # 1116.903 us | kernel_clone();
5) bash-939 | ! 976.133 us | kernel_clone();
5) bash-939 | ! 954.012 us | kernel_clone();
The test looks for the pids it is filtering and will fail if it can not
find them. Without fungraph-proc option set, it will not be displayed and
the test will fail.
Link: https://lore.kernel.org/all/Zl9JFnzKGuUM10X2@J2N7QTR9R3/
Link: https://lore.kernel.org/linux-trace-kernel/20240604152550.0c01d7cd@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35b944a997 ("selftests/ftrace: Add function_graph tracer to func-filter-pid test")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
The update to the ops trampoline done by the function
ftrace_update_trampoline() was accidentally removed from
ftrace_update_pid_func(). Add it back.
Link: https://lore.kernel.org/linux-trace-kernel/20240605205337.6115e9a5@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: df3ec5da6a ("function_graph: Add pid tracing back to function graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a test that creates 3 instances and enables function_graph tracer in
each as well as the top instance, where each will enable a filter (but one
that traces all functions) and check that they are filtering properly.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190825.252845939@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function tracer is tested to see if pid filtering works. Add a test to
test function_graph tracer as well, but only if the function_graph tracer
is enabled for the top level or instance.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190825.083048115@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In most cases function graph is used by a single user. Instead of calling
a loop to call function graph callbacks in this case, call the function
return callback directly.
Use the static_key that is set when the function graph tracer has less
than 2 callbacks registered. It will do the direct call in that case, and
will do the loop over all callers when there are 2 or more callbacks
registered.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.921460797@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In most cases function graph is used by a single user. Instead of calling
a loop to call function graph callbacks in this case, call the function
entry callback directly.
Add a static_key that will be used to set the function graph logic to
either do the loop (when more than one callback is registered) or to call
the callback directly if there is only one registered callback.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.766858241@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of looping through all the elements of fgraph_array[] to see if
there's an gops attached to one and then calling its gops->func(). Create
a fgraph_array_bitmask that sets bits when an index in the array is
reserved (via the simple lru algorithm). Then only the bits set in this
bitmask needs to be looked at where only elements in the array that have
ops registered need to be looked at.
Note, we do not care about races. If a bit is set before the gops is
assigned, it only wastes time looking at the element and ignoring it (as
it did before this bitmask is added).
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.604448781@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of iterating through the entire fgraph_array[] and seeing if one
of the bitmap bits are set to know to call the array's retfunc() function,
use for_each_set_bit() on the bitmap itself. This will only iterate for
the number of set bits.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.447448026@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a selftest for multiple function graph tracer with storage on a same
function. In this case, the shadow stack entry will be shared among those
fgraph with different data storage. So this will ensure the fgraph will
not mixed those storage data.
Link: https://lore.kernel.org/linux-trace-kernel/171509111465.162236.3795819216426570800.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.284049716@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add boot up selftest that passes variables from a function entry to a
function exit, and make sure that they do get passed around.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509110271.162236.11047551496319744627.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.122952310@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Added functions that can be called by a fgraph_ops entryfunc and retfunc to
store state between the entry of the function being traced to the exit of
the same function. The fgraph_ops entryfunc() may call
fgraph_reserve_data() to store up to 32 words onto the task's shadow
ret_stack and this then can be retrieved by fgraph_retrieve_data() called
by the corresponding retfunc().
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509109089.162236.11372474169781184034.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.959703050@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The use of the task->trace_recursion for the logic used for the function
graph no-trace was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use
that instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509107907.162236.6564679266777519065.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.796709456@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The use of the task->trace_recursion for the logic used for the function
graph depth was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use that
instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509106728.162236.2398372644430125344.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.634870264@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The use of the task->trace_recursion for the logic used for the
set_graph_function was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use that
instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509105520.162236.10339831553995971290.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.472955399@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a "task variables" array on the tasks shadow ret_stack that is the
size of longs for each possible registered fgraph_ops. That's a total
of 16, taking up 8 * 16 = 128 bytes (out of a page size 4k).
This will allow for fgraph_ops to do specific features on a per task basis
having a way to maintain state for each task.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509104383.162236.12239656156685718550.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.308806126@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the fgraph_array index is used for the bitmap on the shadow
stack, it may leave some entries after a function_graph instance is
removed. Thus if another instance reuses the fgraph_array index soon
after releasing it, the fgraph may confuse to call the newer callback
for the entries which are pushed by the older instance.
To avoid reusing the fgraph_array index soon after releasing, introduce
a simple LRU table for managing the index number. This will reduce the
possibility of this confusion.
Link: https://lore.kernel.org/linux-trace-kernel/171509103267.162236.6885097397289135378.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.147421545@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that the function_graph has a main callback that handles the function
graph subops tracing, it no longer honors the pid filtering of ftrace. Add
back this logic in the function_graph code to update the gops callback for
the entry function to test if it should trace the current task or not.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.991720703@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow for instances to have their own ftrace_ops part of the fgraph_ops
that makes the funtion_graph tracer filter on the set_ftrace_filter file
of the instance and not the top instance.
This uses the new ftrace_startup_subops(), by using graph_ops as the
"manager ops" that defines the callback function and adds the functions
defined by the filters of the ops for each trace instance. The callback
defined by the manager ops will call the registered fgraph ops that were
added to the fgraph_array.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509102088.162236.15758883237657317789.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.832946261@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The subops filters use a "manager" ops to enable and disable its filters.
The manager ops can handle more than one subops, and its filter is what
controls what functions get set. Add a ftrace_hash_move_and_update_subops()
function that will update the manager ops when the subops filters change.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.673932251@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There are cases where a single system will use a single function callback
to handle multiple users. For example, to allow function_graph tracer to
have multiple users where each can trace their own set of functions, it is
useful to only have one ftrace_ops registered to ftrace that will call a
function by the function_graph tracer to handle the multiplexing with the
different registered function_graph tracers.
Add a "subop_list" to the ftrace_ops that will hold a list of other
ftrace_ops that the top ftrace_ops will manage.
The function ftrace_startup_subops() that takes the manager ftrace_ops and
a subop ftrace_ops it will manage. If there are no subops with the
ftrace_ops yet, it will copy the ftrace_ops subop filters to the manager
ftrace_ops and register that with ftrace_startup(), and adds the subop to
its subop_list. If the manager ops already has something registered, it
will then merge the new subop filters with what it has and enable the new
functions that covers all the subops it has.
To remove a subop, ftrace_shutdown_subops() is called which will use the
subop_list of the manager ops to rebuild all the functions it needs to
trace, and update the ftrace records to only call the functions it now has
registered. If there are no more functions registered, it will then call
ftrace_shutdown() to disable itself completely.
Note, it is up to the manager ops callback to always make sure that the
subops callbacks are called if its filter matches, as there are times in
the update where the callback could be calling more functions than those
that are currently registered.
This could be updated to handle other systems other than function_graph,
for example, fprobes could use this (but will need an interface to call
ftrace_startup_subops()).
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.508431129@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Some of the flags for ftrace_startup() may be exposed even when
CONFIG_DYNAMIC_FTRACE is not configured in. This is fine as the difference
between dynamic ftrace and static ftrace is done within the internals of
ftrace itself. No need to have use cases fail to compile because dynamic
ftrace is disabled.
This change is needed to move some of the logic of what is passed to
ftrace_startup() out of the parameters of ftrace_startup().
Link: https://lore.kernel.org/linux-trace-kernel/171509100890.162236.4362350342549122222.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.350654104@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that function graph tracing can handle more than one user, allow it to
be enabled in the ftrace instances. Note, the filtering of the functions is
still joined by the top level set_ftrace_filter and friends, as well as the
graph and nograph files.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509099743.162236.1699959255446248163.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.190630762@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pass the fgraph_ops structure to the function graph callbacks. This will
allow callbacks to add a descriptor to a fgraph_ops private field that wil
be added in the future and use it for the callbacks. This will be useful
when more than one callback can be registered to the function graph tracer.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509098588.162236.4787930115997357578.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.035147698@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function pointers ftrace_graph_entry and ftrace_graph_return are no
longer called via the function_graph tracer. Instead, an array structure is
now used that will allow for multiple users of the function_graph
infrastructure. The variables are still used by the architecture code for
non dynamic ftrace configs, where a test is made against them to see if
they point to the default stub function or not. This is how the static
function tracing knows to call into the function graph tracer
infrastructure or not.
Two new stub functions are made. entry_run() and return_run(). The
ftrace_graph_entry and ftrace_graph_return are set to them respectively
when the function graph tracer is enabled, and this will trigger the
architecture specific function graph code to be executed.
This also requires checking the global_ops hash for all calls into the
function_graph tracer.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509097408.162236.17387844142114638932.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.872127216@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For the tail-call, there would be 2 or more ftrace_ret_stacks on the
ret_stack, which records "return_to_handler" as the return address except
for the last one. But on the real stack, there should be 1 entry because
tail-call reuses the return address on the stack and jump to the next
function.
In ftrace_graph_ret_addr() that is used for stack unwinding, skip tail
calls as a real stack unwinder would do.
Link: https://lore.kernel.org/linux-trace-kernel/171509096221.162236.8806372072523195752.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.717065217@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow for multiple users to attach to function graph tracer at the same
time. Only 16 simultaneous users can attach to the tracer. This is because
there's an array that stores the pointers to the attached fgraph_ops. When
a function being traced is entered, each of the ftrace_ops entryfunc is
called and if it returns non zero, its index into the array will be added
to the shadow stack.
On exit of the function being traced, the shadow stack will contain the
indexes of the ftrace_ops on the array that want their retfunc to be
called.
Because a function may sleep for a long time (if a task sleeps itself),
the return of the function may be literally days later. If the ftrace_ops
is removed, its place on the array is replaced with a ftrace_ops that
contains the stub functions and that will be called when the function
finally returns.
If another ftrace_ops is added that happens to get the same index into the
array, its return function may be called. But that's actually the way
things current work with the old function graph tracer. If one tracer is
removed and another is added, the new one will get the return calls of the
function traced by the previous one, thus this is not a regression. This
can be fixed by adding a counter to each time the array item is updated and
save that on the shadow stack as well, such that it won't be called if the
index saved does not match the index on the array.
Note, being able to filter functions when both are called is not completely
handled yet, but that shouldn't be too hard to manage.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509096221.162236.8806372072523195752.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.555493396@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add an array structure that will eventually allow the function graph tracer
to have up to 16 simultaneous callbacks attached. It's an array of 16
fgraph_ops pointers, that is assigned when one is registered. On entry of a
function the entry of the first item in the array is called, and if it
returns zero, then the callback returns non zero if it wants the return
callback to be called on exit of the function.
The array will simplify the process of having more than one callback
attached to the same function, as its index into the array can be stored on
the shadow stack. We need to only save the index, because this will allow
the fgraph_ops to be freed before the function returns (which may happen if
the function call schedule for a long time).
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509095075.162236.8272148192748284581.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.392113213@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In order to make it possible to have multiple callbacks registered with the
function_graph tracer, the retstack needs to be converted from an array of
ftrace_ret_stack structures to an array of longs. This will allow to store
the list of callbacks on the stack for the return side of the functions.
Link: https://lore.kernel.org/linux-trace-kernel/171509092742.162236.4427737821399314856.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.073111754@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
