rb_buffer_peek() operates with struct ring_buffer_per_cpu *cpu_buffer
only. Thus, instead of passing variables buffer and cpu it is better
to use cpu_buffer directly. This also reduces the risk of races since
cpu_buffer is not calculated twice.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1249045084-3028-1-git-send-email-robert.richter@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the ability to swap the cpu buffers adds a small overhead to
the recording of a trace, we only want to add it when needed.
Only the irqsoff and preemptoff tracers use this feature, and both are
not recommended for production kernels. This patch disables its use
when neither irqsoff nor preemptoff is configured.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the irqsoff tracer can swap an internal CPU buffer, it is possible
that a swap happens between the start of the write and before the committing
bit is set (the committing bit will disable swapping).
This patch adds a check for this and will fail the write if it detects it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the way RB_WARN_ON works, is to disable either the current
CPU buffer or all CPU buffers, depending on whether a ring_buffer or
ring_buffer_per_cpu struct was passed into the macro.
Most users of the RB_WARN_ON pass in the CPU buffer, so only the one
CPU buffer gets disabled but the rest are still active. This may
confuse users even though a warning is sent to the console.
This patch changes the macro to disable the entire buffer even if
the CPU buffer is passed in.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers report the number of items in the trace buffer.
This uses the ring buffer data to calculate this. Because discarded
events are also counted, the numbers do not match the number of items
that are printed. The ring buffer also adds a "padding" item to the
end of each buffer page which also gets counted as a discarded item.
This patch decrements the counter to the page entries on a discard.
This allows us to ignore discarded entries while reading the buffer.
Decrementing the counter is still safe since it can only happen while
the committing flag is still set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function ring_buffer_event_discard can be used on any item in the
ring buffer, even after the item was committed. This function provides
no safety nets and is very race prone.
An item may be safely removed from the ring buffer before it is committed
with the ring_buffer_discard_commit.
Since there are currently no users of this function, and because this
function is racey and error prone, this patch removes it altogether.
Note, removing this function also allows the counters to ignore
all discarded events (patches will follow).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the ring buffer uses an iterator (static read mode, not on the
fly reading), when it crosses a page boundery, it will skip the first
entry on the next page. The reason is that the last entry of a page
is usually padding if the page is not full. The padding will not be
returned to the user.
The problem arises on ring_buffer_read because it also increments the
iterator. Because both the read and peek use the same rb_iter_peek,
the rb_iter_peak will return the padding but also increment to the next
item. This is because the ring_buffer_peek will not incerment it
itself.
The ring_buffer_read will increment it again and then call rb_iter_peek
again to get the next item. But that will be the second item, not the
first one on the page.
The reason this never showed up before, is because the ftrace utility
always calls ring_buffer_peek first and only uses ring_buffer_read
to increment to the next item. The ring_buffer_peek will always keep
the pointer to a valid item and not padding. This just hid the bug.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The loops in the ring buffer that use cpu_relax are not dependent on
other CPUs. They simply came across some padding in the ring buffer and
are skipping over them. It is a normal loop and does not require a
cpu_relax.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a commit is taking place on a CPU ring buffer, do not allow it to
be swapped. Return -EBUSY when this is detected instead.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The callers of reset must ensure that no commit can be taking place
at the time of the reset. If it does then we may corrupt the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I noticed oprofile memleaked in linux-2.6 current tree,
and tracked this ring-buffer leak.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <4A7C06B9.2090302@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When calling rb_buffer_peek() from ring_buffer_consume() and a
padding event is returned, the function rb_advance_reader() is
called twice. This may lead to missing samples or under high
workloads to the warning below. This patch fixes this. If a padding
event is returned by rb_buffer_peek() it will be consumed by the
calling function now.
Also, I simplified some code in ring_buffer_consume().
------------[ cut here ]------------
WARNING: at /dev/shm/.source/linux/kernel/trace/ring_buffer.c:2289 rb_advance_reader+0x2e/0xc5()
Hardware name: Anaheim
Modules linked in:
Pid: 29, comm: events/2 Tainted: G W 2.6.31-rc3-oprofile-x86_64-standard-00059-g5050dc2 #1
Call Trace:
[<ffffffff8106776f>] ? rb_advance_reader+0x2e/0xc5
[<ffffffff81039ffe>] warn_slowpath_common+0x77/0x8f
[<ffffffff8103a025>] warn_slowpath_null+0xf/0x11
[<ffffffff8106776f>] rb_advance_reader+0x2e/0xc5
[<ffffffff81068bda>] ring_buffer_consume+0xa0/0xd2
[<ffffffff81326933>] op_cpu_buffer_read_entry+0x21/0x9e
[<ffffffff810be3af>] ? __find_get_block+0x4b/0x165
[<ffffffff8132749b>] sync_buffer+0xa5/0x401
[<ffffffff810be3af>] ? __find_get_block+0x4b/0x165
[<ffffffff81326c1b>] ? wq_sync_buffer+0x0/0x78
[<ffffffff81326c76>] wq_sync_buffer+0x5b/0x78
[<ffffffff8104aa30>] worker_thread+0x113/0x1ac
[<ffffffff8104dd95>] ? autoremove_wake_function+0x0/0x38
[<ffffffff8104a91d>] ? worker_thread+0x0/0x1ac
[<ffffffff8104dc9a>] kthread+0x88/0x92
[<ffffffff8100bdba>] child_rip+0xa/0x20
[<ffffffff8104dc12>] ? kthread+0x0/0x92
[<ffffffff8100bdb0>] ? child_rip+0x0/0x20
---[ end trace f561c0a58fcc89bd ]---
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The commit:
commit e0fdace10e
Author: David Miller <davem@davemloft.net>
Date: Fri Aug 1 01:11:22 2008 -0700
debug_locks: set oops_in_progress if we will log messages.
Otherwise lock debugging messages on runqueue locks can deadlock the
system due to the wakeups performed by printk().
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will permanently set oops_in_progress on any lockdep failure.
When this triggers it will cause any read from the ring buffer to
permanently disable the ring buffer (not to mention no locking of
printk).
This patch removes the check. It keeps the print in NMI which makes
sense. This is probably OK, since the ring buffer should not cause
something to set oops_in_progress anyway.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function ring_buffer_discard_commit inversed the code path
of the result of try_to_discard. It should skip incrementing the
entry counter if try_to_discard succeeded. But instead, it increments
the entry conder if it succeeded to discard, and does not increment
it if it fails.
The result of this bug is that filtering will make the stat counters
incorrect.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kernel/trace/ring_buffer.c: In function 'rb_tail_page_update':
kernel/trace/ring_buffer.c:849: warning: value computed is not used
kernel/trace/ring_buffer.c:850: warning: value computed is not used
Add "(void)"s to fix this warning, because we don't need here to handle
the fail case of cmpxchg, it's fine if an interrupt already did the
job.
Changed from V1:
Add a comment(which is written by Steven) for it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch converts the ring buffers into a completely lockless
buffer recording system. The read side still takes locks since
we still serialize readers. But the writers are the ones that
must be lockless (those can happen in NMIs).
The main change is to the "head_page" pointer. We write to the
tail, and read from the head. The "head_page" pointer in the cpu
buffer is now just a reference to where to look. The real head
page is now kept in the head_page->list->prev->next pointer.
That is, in the list head of the previous page we set flags.
The list pages are allocated to be aligned such that the lowest
significant bits are always zero pointing to the list. This gives
us play to put in flags to their pointers.
bit 0: set when the page is a head page
bit 1: set when the writer is moving the page (for overwrite mode)
cmpxchg is used to update the pointer.
When the writer wraps the buffer and the tail meets the head,
in overwrite mode, the writer must move the head page forward.
It first uses cmpxchg to change the pointer flag from 1 to 2.
Once this is done, the reader on another CPU will not take the
page from the buffer.
The writers need to protect against interrupts (we don't bother with
disabling interrupts because NMIs are allowed to write too).
After the writer sets the pointer flag to 2, it takes care to
manage interrupts coming in. This is discribed in detail within the
comments of the code.
Changes in version 2:
- Let reader reset entries value of header page.
- Fix tail page passing commit page on reader page test.
- Always increment entries and write counter in rb_tail_page_update
- Add safety check in rb_set_commit_to_write to break out of infinite loop
- add mask in rb_is_reader_page
[ Impact: lock free writing to the ring buffer ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch changes the ring buffer data pages from using a link list
head pointer, to making each buffer page point to another buffer page
and never back to a "head".
This makes the handling of the ring buffer less complex, since the
traversing of the ring buffer pages no longer needs to account for the
head pointer.
This change also is needed to make the ring buffer lockless.
[
Changes in version 2:
- Added change that Lai Jiangshan mentioned.
From: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Thu, 11 Jun 2009 11:25:48 +0800
LKML-Reference: <4A30793C.6090208@cn.fujitsu.com>
I'm not sure whether these 4 lines:
bpage = list_entry(pages.next, struct buffer_page, list);
list_del_init(&bpage->list);
cpu_buffer->pages = &bpage->list;
list_splice(&pages, cpu_buffer->pages);
equal to these 2 lines:
cpu_buffer->pages = pages.next;
list_del(&pages);
If there are equivalent, I think the second one
are simpler. It may be not a really necessarily cleanup.
What I asked is: if there are equivalent, could you use these two line:
cpu_buffer->pages = pages.next;
list_del(&pages);
]
[ Impact: simplify the ring buffer to help make it lockless ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
In hunting down the cause for the hwlat_detector ring buffer spew in
my failed -next builds it became obvious that folks are now treating
ring_buffer as something that is generic independent of tracing and thus,
suitable for public driver consumption.
Given that there are only a few minor areas in ring_buffer that have any
reliance on CONFIG_TRACING or CONFIG_FUNCTION_TRACER, provide stubs for
those and make it generally available.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jon Masters <jcm@jonmasters.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090625053012.GB19944@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
tracing/urgent: warn in case of ftrace_start_up inbalance
tracing/urgent: fix unbalanced ftrace_start_up
function-graph: add stack frame test
function-graph: disable when both x86_32 and optimize for size are configured
ring-buffer: have benchmark test print to trace buffer
ring-buffer: do not grab locks in nmi
ring-buffer: add locks around rb_per_cpu_empty
ring-buffer: check for less than two in size allocation
ring-buffer: remove useless compile check for buffer_page size
ring-buffer: remove useless warn on check
ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
tracing: update sample event documentation
tracing/filters: fix race between filter setting and module unload
tracing/filters: free filter_string in destroy_preds()
ring-buffer: use commit counters for commit pointer accounting
ring-buffer: remove unused variable
ring-buffer: have benchmark test handle discarded events
ring-buffer: prevent adding write in discarded area
tracing/filters: strloc should be unsigned short
tracing/filters: operand can be negative
...
Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it
will need to read from the ring buffer. But the read side of the
ring buffer still takes locks. This patch adds a check on the read
side that if it is in an NMI, then it will disable the ring buffer
and not take any locks.
Reads can still happen on a disabled ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The checking of whether the buffer is empty or not needs to be serialized
among the readers. Add the reader spin lock around it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer must have at least two pages allocated for the
reader page swap to work.
The page count check will miss the case of a zero size passed in.
Even though a zero size ring buffer would probably fail an allocation,
making the min size check for less than two instead of equal to one makes
the code a bit more robust.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original version of the ring buffer had a hack to map the
page struct that held the pages of the buffer to also be the structure
that the ring buffer would keep the pages in a link list.
This overlap of the page struct was very dangerous and that hack was
removed a while ago.
But there was a check to make sure the buffer_page never became bigger
than the page struct, and would fail the compile if it did. The
check was only meaningful when we had the hack. Now that we have separate
allocated descriptors for the buffer pages, we can remove this check.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A check if "write > BUF_PAGE_SIZE" is done right after a
if (write > BUF_PAGE_SIZE)
return ...;
Thus the check is actually testing the compiler and not the
kernel. This is useless, remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The index of the event is found by masking PAGE_MASK to it and
subtracting the header size. Currently the header size is calculate
by PAGE_SIZE - BUF_PAGE_SIZE, when we already have a macro
BUF_PAGE_HDR_SIZE to define it.
If we want to change BUF_PAGE_SIZE to something less than filling
the rest of the page (this is done for debugging), then we break
the algorithm to find the index.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer is made up of three sets of pointers.
The head page pointer, which points to the next page for the reader to
get.
The commit pointer and commit index, which points to the page and index
of the last committed write respectively.
The tail pointer and tail index, which points to the page and the index
of the last reserved data respectively (non committed).
The commit pointer is only moved forward by the outer most writer.
If a nested writer comes in, it will not move the pointer forward.
The current implementation has a flaw. It assumes that the outer most
writer successfully reserved data. There's a small race window where
the outer most writer could find the tail pointer, but a nested
writer could come in (via interrupt) and move the tail forward, and
even the commit forward.
The outer writer would not realized the commit moved forward and the
accounting will break.
This patch changes the design to use counters in the per cpu buffers
to keep track of commits. The counters are incremented at the start
of the commit, and decremented at the end. If the end commit counter
is 1, then it moves the commit pointers. A loop is made to check for
races between checking and moving the commit pointers. Only the outer
commit should move the pointers anyway.
The test of knowing if a reserve is equal to the last commit update
is still needed to know for time keeping. The time code is much less
racey than the commit updates.
This change not only solves the mentioned race, but also makes the
code simpler.
[ Impact: fix commit race and simplify code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the compiler error:
kernel/trace/ring_buffer.c: In function 'rb_move_tail':
kernel/trace/ring_buffer.c:1236: warning: unused variable 'event'
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This a very tight race where an interrupt could come in and not
have enough data to put into the end of a buffer page, and that
it would fail to write and need to go to the next page.
But if this happened when another writer was about to reserver
their data, and that writer has smaller data to reserve, then
it could succeed even though the interrupt moved the tail page.
To pervent that, if we fail to store data, and by subtracting the
amount we reserved we still have room for smaller data, we need
to fill that space with "discarded" data.
[ Impact: prevent race were buffer data may be lost ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <200906122115.30787.rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This gets rid of a heap of false-positive warnings from the tracer
code due to the use of bitfields.
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
The update of ret got mistakenly added to the if statement of
rb_try_to_discard. The variable ret should be 1 on commit and zero
otherwise.
[ Impact: fix compiler warning and real bug ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
> (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
> (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
> #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.
This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>
[ store key in ring buffer descriptor ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every buffer page in the ring buffer includes its own time stamp.
When an event is recorded to the ring buffer with a delta time greater
than what can be held in the event header, a time stamp event is created.
If the the create timestamp falls over to the next buffer page, it is
redundant because the buffer page holds a full time stamp. This patch
will try to discard the time stamp when it falls to the start of the
next page.
This change also fixes a issues with disarding events. If most events are
discarded, timestamps will start to creep into the ring buffer. If we
do not discard the timestamps then they can fill up the ring buffer over
time and waste space.
This change will keep time stamps from filling up over another page. If
something is recorded in the buffer page, and the rest is filtered, then
the time stamps can only fill up to the end of the page.
[ Impact: prevent time stamps from filling ring buffer ]
Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are times that a race may happen that we add a timestamp in a
nested write. This timestamp would just contain a zero delta and serves
no purpose.
Now that we have a way to discard events, this patch will try to discard
the timestamp instead of just wasting the space in the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bug in ring_buffer_discard_commit. The wrong
pointer is being compared in order to check if the event
can be freed from the buffer rather than discarded
(i.e. marked as PAD).
I noticed this when I was working on duration filtering.
The bug is not deadly - it just results in lots of wasted
space in the buffer. All filtered events are left in
the buffer and marked as discarded, rather than being
removed from the buffer to make space for other events.
Unfortunately, when I fixed this bug, I got errors doing a
filtered function trace. Multiple TIME_EXTEND
events pile up in the buffer, and trigger the
following loop overage warning in rb_iter_peek():
again:
...
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
return NULL;
I'm not sure what the best way is to fix this. I don't
know if I should extend the loop threshhold, or if I should
make the test more complex (ignore TIME_EXTEND
events), or just get rid of this loop check completely.
Note that if I implement a workaround for this, then I
see another problem from rb_advance_iter(). I haven't
tracked that one down yet.
In general, it seems like the case of removing filtered
events has not been working properly, and so some assumptions
about buffer invariant conditions need to be revisited.
Here's the patch for the simple fix:
Compare correct pointer for checking if an event can be
freed rather than left as discarded in the buffer.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4A25BE9E.5090909@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is a bit of micro-optimizations. But since the ring buffer is used
in tracing every function call, it is an extreme hot path. Every nanosecond
counts.
This change shows over 5% improvement in the ring-buffer-benchmark.
[ Impact: more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_time_stamp that is exported adds a little more overhead
than is needed for using it internally. This patch adds an internal
timestamp function that can be inlined (a single line function)
and used internally for the ring buffer.
[ Impact: a little less overhead to the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Doing some small changes in the fast path of the ring buffer recording
saves over 3% in the ring-buffer-benchmark test.
[ Impact: a little faster ring buffer recording ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event length is calculated and passed in to rb_reserve_next_event
in two different locations. Having rb_reserve_next_event do the
calculations directly makes only one location to do the change and
causes the calculation to be inlined by gcc.
Before:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16490 24 12 16526 408e kernel/trace/ring_buffer.o
[ Impact: smaller more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The rb_reserve_next_event is only called for the data type (type = 0).
There is no reason to pass in the type to the function.
Before:
text data bss dec hex filename
16554 24 12 16590 40ce kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
[ Impact: cleaner, smaller and slightly more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a WARN_ON in the ring buffer code that makes sure preemption
is disabled. It checks "!preempt_count()". But when CONFIG_PREEMPT is not
enabled, preempt_count() is always zero, and this will trigger the warning.
[ Impact: prevent false warning on non preemptible kernels ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar thought the code would be cleaner if we used a function call
instead of a goto for moving the tail page. After implementing this,
it seems that gcc still inlines the result and the output is pretty much
the same. Since this is considered a cleaner approach, might as well
implement it.
[ Impact: code clean up ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code in __rb_reserve_next checks on page overflow if it is the
original commiter and then resets the page back to the original
setting. Although this is fine, and the code is correct, it is
a bit fragil. Some experimental work I did breaks it easily.
The better and more robust solution is to have all commiters that
overflow the page, simply subtract what they added.
[ Impact: more robust ring buffer account management ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the hot path of the ring buffer "__rb_reserve_next" there's a big
if statement that does not even return back to the work flow.
code;
if (cross to next page) {
[ lots of code ]
return;
}
more code;
The condition is even the unlikely path, although we do not denote it
with an unlikely because gcc is fine with it. The condition is true when
the write crosses a page boundary, and we need to start at a new page.
Having this if statement makes it hard to read, but calling another
function to do the work is also not appropriate, because we are using a lot
of variables that were set before the if statement, and we do not want to
send them as parameters.
This patch changes it to a goto:
code;
if (cross to next page)
goto next_page;
more code;
return;
next_page:
[ lots of code]
This makes the code easier to understand, and a bit more obvious.
The output from gcc is practically identical. For some reason, gcc decided
to use different registers when I switched it to a goto. But other than that,
the logic is the same.
[ Impact: easier to read code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As a precaution, it is best to disable writing to the ring buffers
when reseting them.
[ Impact: prevent weird things if write happens during reset ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the swap page ring buffer code that is used by the ftrace splice code,
we scan the page to increment the counter of entries read.
With the number of entries already in the page we simply need to add it.
[ Impact: speed up reading page from ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, when the ring buffer writer overflows the buffer and must
write over non consumed data, we increment the overrun counter by
reading the entries on the page we are about to overwrite. This reads
the entries one by one.
This is not very effecient. This patch adds another entry counter
into each buffer page descriptor that keeps track of the number of
entries on the page. Now on overwrite, the overrun counter simply
needs to add the number of entries that is on the page it is about
to overwrite.
[ Impact: speed up of ring buffer in overwrite mode ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries counter in cpu buffer is not atomic. It can be updated by
other interrupts or from another CPU (readers).
But making entries into "atomic_t" causes an atomic operation that can
hurt performance. Instead we convert it to a local_t that will increment
a counter with a local CPU atomic operation (if the arch supports it).
Instead of fighting with readers and overwrites that decrement the counter,
I added a "read" counter. Every time a reader reads an entry it is
incremented.
We already have a overrun counter and with that, the entries counter and
the read counter, we can calculate the total number of entries in the
buffer with:
(entries - overrun) - read
As long as the total number of entries in the ring buffer is less than
the word size, this will work. But since the entries counter was previously
a long, this is no different than what we had before.
Thanks to Andrew Morton for pointing out in the first version that
atomic_t does not replace unsigned long. I switched to atomic_long_t
even though it is signed. A negative count is most likely a bug.
[ Impact: keep accurate count of cpu buffer entries ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The WARN_ON in the ring buffer when a commit is preempted and the
buffer is filled by preceding writes can happen in normal operations.
The WARN_ON makes it look like a bug, not to mention, because
it does not stop tracing and calls printk which can also recurse, this
is prone to deadlock (the WARN_ON is not in a position to recurse).
This patch removes the WARN_ON and replaces it with a counter that
can be retrieved by a tracer. This counter is called commit_overrun.
While at it, I added a nmi_dropped counter to count any time an NMI entry
is dropped because the NMI could not take the spinlock.
[ Impact: prevent deadlock by printing normal case warning ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
