mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 02:21:47 +00:00
b3e2080694
55400 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Herbert Xu
|
b5f9bd15b8 |
ila: Fix rhashtable walker list corruption
ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the
stack but it never frees them. This corrupts the walker list of
the hash table.
This patch fixes it.
Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com
Fixes:
|
||
Paolo Abeni
|
0b91bce1eb |
net: datagram: fix unbounded loop in __skb_try_recv_datagram()
Christoph reported a stall while peeking datagram with an offset when
busy polling is enabled. __skb_try_recv_datagram() uses as the loop
termination condition 'queue empty'. When peeking, the socket
queue can be not empty, even when no additional packets are received.
Address the issue explicitly checking for receive queue changes,
as currently done by __skb_wait_for_more_packets().
Fixes:
|
||
Linus Torvalds
|
1a9df9e29c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
|
||
|
Linus Torvalds
|
14c741de93 |
NFS client bugfixes for Linux 5.1
Highlights include:
Stable fixes:
- Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
- fix mount/umount race in nlmclnt.
- NFSv4.1 don't free interrupted slot on open
Bugfixes:
- Don't let RPC_SOFTCONN tasks time out if the transport is connected
- Fix a typo in nfs_init_timeout_values()
- Fix layoutstats handling during read failovers
- fix uninitialized variable warning
-----BEGIN PGP SIGNATURE-----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=d5ft
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
- fix mount/umount race in nlmclnt.
- NFSv4.1 don't free interrupted slot on open
Bugfixes:
- Don't let RPC_SOFTCONN tasks time out if the transport is connected
- Fix a typo in nfs_init_timeout_values()
- Fix layoutstats handling during read failovers
- fix uninitialized variable warning"
* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: fix uninitialized variable warning
pNFS/flexfiles: Fix layoutstats handling during read failovers
NFS: Fix a typo in nfs_init_timeout_values()
SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
NFSv4.1 don't free interrupted slot on open
NFS: fix mount/umount race in nlmclnt.
NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
|
||
Alakesh Haloi
|
01f2f5b82a |
SUNRPC: fix uninitialized variable warning
Avoid following compiler warning on uninitialized variable
net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return read;
^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return ret < 0 ? ret : read;
~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
||
Jiri Pirko
|
c493b09b27 |
net: devlink: skip info_get op call if it is not defined in dumpit
In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.
Fixes:
|
||
Xin Long
|
9926cb5f8b |
tipc: change to check tipc_own_id to return in tipc_net_stop
When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit |
||
Leslie Monis
|
1f8389bf63 |
net: sched: Kconfig: update reference link for PIE
RFC 8033 replaces the IETF draft for PIE Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Arnd Bergmann
|
526949e877 |
rxrpc: avoid clang -Wuninitialized warning
clang produces a false-positive warning as it fails to notice
that "lost = true" implies that "ret" is initialized:
net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (lost)
^~~~
net/rxrpc/output.c:437:6: note: uninitialized use occurs here
if (ret >= 0) {
^~~
net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false
if (lost)
^~~~~~~~~
net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning
int ret, opt;
^
= 0
Rearrange the code to make that more obvious and avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Jon Maloy
|
737889efe9 |
tipc: tipc clang warning
When checking the code with clang -Wsometimes-uninitialized we get the
following warning:
if (!tipc_link_is_establishing(l)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:847:46: note: uninitialized use occurs here
tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);
net/tipc/node.c:831:2: note: remove the 'if' if its condition is always
true
if (!tipc_link_is_establishing(l)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence
this warning
struct tipc_media_addr *maddr;
We fix this by initializing 'maddr' to NULL. For the matter of clarity,
we also test if 'xmitq' is non-empty before we use it and 'maddr'
further down in the function. It will never happen that 'xmitq' is non-
empty at the same time as 'maddr' is NULL, so this is a sufficient test.
Fixes:
|
||
John Hurley
|
064c5d6881 |
net: sched: fix cleanup NULL pointer exception in act_mirr
A new mirred action is created by the tcf_mirred_init function. This
contains a list head struct which is inserted into a global list on
successful creation of a new action. However, after a creation, it is
still possible to error out and call the tcf_idr_release function. This,
in turn, calls the act_mirr cleanup function via __tcf_idr_release and
__tcf_action_put. This cleanup function tries to delete the list entry
which is as yet uninitialised, leading to a NULL pointer exception.
Fix this by initialising the list entry on creation of a new action.
Bug report:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000840c73067 P4D 8000000840c73067 PUD 858dcc067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 32 PID: 5636 Comm: handler194 Tainted: G OE 5.0.0+ #186
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.3.6 06/03/2015
RIP: 0010:tcf_mirred_release+0x42/0xa7 [act_mirred]
Code: f0 90 39 c0 e8 52 04 57 c8 48 c7 c7 b8 80 39 c0 e8 94 fa d4 c7 48 8b 93 d0 00 00 00 48 8b 83 d8 00 00 00 48 c7 c7 f0 90 39 c0 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 d0 00
RSP: 0018:ffffac4aa059f688 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9dcd1b214d00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9dcd1fa165f8 RDI: ffffffffc03990f0
RBP: ffff9dccf9c7af80 R08: 0000000000000a3b R09: 0000000000000000
R10: ffff9dccfa11f420 R11: 0000000000000000 R12: 0000000000000001
R13: ffff9dcd16b433c0 R14: ffff9dcd1b214d80 R15: 0000000000000000
FS: 00007f441bfff700(0000) GS:ffff9dcd1fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000839e64004 CR4: 00000000001606e0
Call Trace:
tcf_action_cleanup+0x59/0xca
__tcf_action_put+0x54/0x6b
__tcf_idr_release.cold.33+0x9/0x12
tcf_mirred_init.cold.20+0x22e/0x3b0 [act_mirred]
tcf_action_init_1+0x3d0/0x4c0
tcf_action_init+0x9c/0x130
tcf_exts_validate+0xab/0xc0
fl_change+0x1ca/0x982 [cls_flower]
tc_new_tfilter+0x647/0x8d0
? load_balance+0x14b/0x9e0
rtnetlink_rcv_msg+0xe3/0x370
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1d4/0x2b0
? rtnl_calcit.isra.31+0xf0/0xf0
netlink_rcv_skb+0x49/0x110
netlink_unicast+0x16f/0x210
netlink_sendmsg+0x1df/0x390
sock_sendmsg+0x36/0x40
___sys_sendmsg+0x27b/0x2c0
? futex_wake+0x80/0x140
? do_futex+0x2b9/0xac0
? ep_scan_ready_list.constprop.22+0x1f2/0x210
? ep_poll+0x7a/0x430
__sys_sendmsg+0x47/0x80
do_syscall_64+0x55/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
|
||
Trond Myklebust
|
d84dd3fb82 |
SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
If the transport is still connected, then we do want to allow RPC_SOFTCONN tasks to retry. They should time out if and only if the connection is broken. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> |
||
Wang Hai
|
6b70fc94af |
net-sysfs: Fix memory leak in netdev_register_kobject
When registering struct net_device, it will call
register_netdevice ->
netdev_register_kobject ->
device_initialize(dev);
dev_set_name(dev, "%s", ndev->name)
device_add(dev)
register_queue_kobjects(ndev)
In netdev_register_kobject(), if device_add(dev) or
register_queue_kobjects(ndev) failed. Register_netdevice()
will return error, causing netdev_freemem(ndev) to be
called to free net_device, however put_device(&dev->dev)->..->
kobject_cleanup() won't be called, resulting in a memory leak.
syzkaller report this:
BUG: memory leak
unreferenced object 0xffff8881f4fad168 (size 8):
comm "syz-executor.0", pid 3575, jiffies 4294778002 (age 20.134s)
hex dump (first 8 bytes):
77 70 61 6e 30 00 ff ff wpan0...
backtrace:
[<000000006d2d91d7>] kstrdup_const+0x3d/0x50 mm/util.c:73
[<00000000ba9ff953>] kvasprintf_const+0x112/0x170 lib/kasprintf.c:48
[<000000005555ec09>] kobject_set_name_vargs+0x55/0x130 lib/kobject.c:281
[<0000000098d28ec3>] dev_set_name+0xbb/0xf0 drivers/base/core.c:1915
[<00000000b7553017>] netdev_register_kobject+0xc0/0x410 net/core/net-sysfs.c:1727
[<00000000c826a797>] register_netdevice+0xa51/0xeb0 net/core/dev.c:8711
[<00000000857bfcfd>] cfg802154_update_iface_num.isra.2+0x13/0x90 [ieee802154]
[<000000003126e453>] ieee802154_llsec_fill_key_id+0x1d5/0x570 [ieee802154]
[<00000000e4b3df51>] 0xffffffffc1500e0e
[<00000000b4319776>] platform_drv_probe+0xc6/0x180 drivers/base/platform.c:614
[<0000000037669347>] really_probe+0x491/0x7c0 drivers/base/dd.c:509
[<000000008fed8862>] driver_probe_device+0xdc/0x240 drivers/base/dd.c:671
[<00000000baf52041>] device_driver_attach+0xf2/0x130 drivers/base/dd.c:945
[<00000000c7cc8dec>] __driver_attach+0x10e/0x210 drivers/base/dd.c:1022
[<0000000057a757c2>] bus_for_each_dev+0x154/0x1e0 drivers/base/bus.c:304
[<000000005f5ae04b>] bus_add_driver+0x427/0x5e0 drivers/base/bus.c:645
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
|
||
Davide Caratti
|
ee3bbfe806 |
net/sched: let actions use RCU to access 'goto_chain'
use RCU when accessing the action chain, to avoid use after free in the traffic path when 'goto chain' is replaced on existing TC actions (see script below). Since the control action is read in the traffic path without holding the action spinlock, we need to explicitly ensure that a->goto_chain is not NULL before dereferencing (i.e it's not sufficient to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL dereferences in tcf_action_goto_chain_exec() when the following script: # tc chain add dev dd0 chain 42 ingress protocol ip flower \ > ip_proto udp action pass index 4 # tc filter add dev dd0 ingress protocol ip flower \ > ip_proto udp action csum udp goto chain 42 index 66 # tc chain del dev dd0 chain 42 ingress (start UDP traffic towards dd0) # tc action replace action csum udp pass index 66 was run repeatedly for several hours. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Suggested-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Davide Caratti
|
7e0c8892df |
net/sched: act_vlan: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action vlan pop pass index 90
# tc actions replace action vlan \
> pop goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action vlan
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: vlan pop goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00
RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00
R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0
FS: 0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? enqueue_hrtimer+0x39/0x90
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387
RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000
R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_vlan_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
e5fdabacbf |
net/sched: act_tunnel_key: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \
> nocsum id 1 pass index 90
# tc actions replace action tunnel_key \
> set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action tunnel_key
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: tunnel_key set
src_ip 10.10.10.1
dst_ip 20.20.2.0
key_id 1
dst_port 3128
nocsum goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002
RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246
RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000
R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40
FS: 0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00
R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_tunnel_key_init() proved to fix
the above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
7c3d825d12 |
net/sched: act_skbmod: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90
# tc actions replace action skbmod \
> set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action skbmod
had the following output:
src MAC address <00:c1:a0:c1:a0:00>
src MAC address <00:c1:a0:c1:a0:00>
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff8987ffd83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8987aeb68800 RCX: ffff8987fa263640
RDX: 0000000000000000 RSI: ffff8987f51c8802 RDI: 00000000000000a0
RBP: ffff8987ffd83c80 R08: ffff8987f939bac8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8987f5c77d00
R13: ffff8987f5c77d08 R14: 0000000000000001 R15: ffff8987f0c29f00
FS: 0000000000000000(0000) GS:ffff8987ffd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007832c004 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 56 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa2a1c038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffa94184f0 RBX: 0000000000000003 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
RBP: 0000000000000003 R08: 001123cfc2ba71ac R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000f4240 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_skbmod veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd cryptd glue_helper snd_pcm joydev pcspkr virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover virtio_console ttm virtio_blk failover drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_skbmod_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
ec7727bb24 |
net/sched: act_skbedit: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action skbedit ptype host pass index 90
# tc actions replace action skbedit \
> ptype host goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action skbedit
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: skbedit ptype host goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00
RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00
R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0
FS: 0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_skbedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
4b006b0c13 |
net/sched: act_simple: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action simple sdata hello pass index 90
# tc actions replace action simple \
> sdata world goto chain 42 index 90 cookie c1a0c1a0
# tc action show action simple
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: Simple <world>
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140
RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa
R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100
R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0
FS: 0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_simple_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
e8c87c643e |
net/sched: act_sample: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action sample rate 1024 group 4 pass index 90
# tc actions replace action sample \
> rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action sample
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: sample rate 1/1024 group 4 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b
RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0
RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400
R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00
R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600
FS: 0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_sample_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
d6124d6ba6 |
net/sched: act_police: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action police rate 3mbit burst 250k pass index 90
# tc actions replace action police \
> rate 3mbit burst 250k goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action police rate 3mbit burst
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: police 0x5a rate 3Mbit burst 250Kb mtu 2Kb action goto chain 42 overhead 0b
ref 2 bind 1
cookie c1a0c1a0
Then, when crash0 starts transmitting more than 3Mbit/s, the following
kernel crash is observed:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007a779067 P4D 800000007a779067 PUD 2ad96067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 5032 Comm: netperf Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb0e04064fa60 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff93bb3322cce0 RCX: 0000000000000005
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff93bb3322cce0
RBP: ffffb0e04064fb00 R08: 0000000000000022 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff93bb3beed300
R13: ffff93bb3beed308 R14: 0000000000000001 R15: ffff93bb3b64d000
FS: 00007f0bc6be5740(0000) GS:ffff93bb3db80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000746a8001 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ipt_do_table+0x31c/0x420 [ip_tables]
? ip_finish_output2+0x16f/0x430
ip_finish_output2+0x16f/0x430
? ip_output+0x69/0xe0
ip_output+0x69/0xe0
? ip_forward_options+0x1a0/0x1a0
__tcp_transmit_skb+0x563/0xa40
tcp_write_xmit+0x243/0xfa0
__tcp_push_pending_frames+0x32/0xf0
tcp_sendmsg_locked+0x404/0xd30
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
? __sys_connect+0x87/0xf0
? syscall_trace_enter+0x1df/0x2e0
? __audit_syscall_exit+0x216/0x260
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f0bc5ffbafd
Code: 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 8b 05 ae c4 2c 00 85 c0 75 2d 45 31 c9 45 31 c0 4c 63 d1 48 63 ff b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 63 63 2c 00 f7 d8 64 89 02 48
RSP: 002b:00007fffef94b7f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000004000 RCX: 00007f0bc5ffbafd
RDX: 0000000000004000 RSI: 00000000017e5420 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
R13: 00000000017e51d0 R14: 0000000000000010 R15: 0000000000000006
Modules linked in: act_police veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_blk virtio_net virtio_console net_failover failover crc32c_intel ata_piix libata serio_raw virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_police_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
6ac86ca352 |
net/sched: act_pedit: validate the control action inside init()
the following script:
# tc filter add dev crash0 egress matchall \
> action pedit ex munge ip ttl set 10 pass index 90
# tc actions replace action pedit \
> ex munge ip ttl set 10 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action pedit
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: pedit action goto chain 42 keys 1
index 90 ref 2 bind 1
key #0 at ipv4+8: val 0a000000 mask 00ffffff
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff94a73db03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff94a6ee4c0700 RCX: 000000000000000a
RDX: 0000000000000000 RSI: ffff94a6ed22c800 RDI: 0000000000000000
RBP: ffff94a73db03c80 R08: ffff94a7386fa4c8 R09: ffff94a73229ea20
R10: 0000000000000000 R11: 0000000000000000 R12: ffff94a6ed22cb00
R13: ffff94a6ed22cb08 R14: 0000000000000001 R15: ffff94a6ed22c800
FS: 0000000000000000(0000) GS:ffff94a73db00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007120e002 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 4e ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffab1740387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffb18184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000f168fa695f9a9 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_pedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep aesni_intel snd_hda_core crypto_simd snd_seq cryptd glue_helper snd_seq_device snd_pcm joydev snd_timer pcspkr virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper virtio_net net_failover syscopyarea sysfillrect sysimgblt failover virtio_blk fb_sys_fops virtio_console ttm drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_pedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
1e45d043a8 |
net/sched: act_nat: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action nat ingress 1.18.1.1 1.18.2.2 pass index 90
# tc actions replace action nat \
> ingress 1.18.1.1 1.18.2.2 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action nat
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: nat ingress 1.18.1.1/32 1.18.2.2 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002d180067 P4D 800000002d180067 PUD 7cb8b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 164 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffae4500e2fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9fa52e28c800 RCX: 0000000001011201
RDX: 0000000000000000 RSI: 0000000000000056 RDI: ffff9fa52ca12800
RBP: ffffae4500e2fb70 R08: 0000000000000022 R09: 000000000000000e
R10: 00000000ffffffff R11: 0000000001011201 R12: ffff9fa52cbc9c00
R13: ffff9fa52cbc9c08 R14: 0000000000000001 R15: ffff9fa52ca12780
FS: 0000000000000000(0000) GS:ffff9fa57db80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073f8c004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_nat veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk net_failover failover virtio_console drm crc32c_intel floppy ata_piix libata virtio_pci virtio_ring virtio serio_raw dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_nat_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
c53075ea5d |
net/sched: act_connmark: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action connmark pass index 90
# tc actions replace action connmark \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action connmark
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: connmark zone 0 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 302 Comm: kworker/0:2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff9bea406c3ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c5dfc009f00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bea406c3a80 RDI: ffff8c5dfb9d6ec0
RBP: ffff9bea406c3b70 R08: ffff8c5dfda222a0 R09: ffffffff90933c3c
R10: 0000000000000000 R11: 0000000092793f7d R12: ffff8c5df48b3c00
R13: ffff8c5df48b3c08 R14: 0000000000000001 R15: ffff8c5dfb9d6e40
FS: 0000000000000000(0000) GS:ffff8c5dfda00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000062e0e006 CR4: 00000000001606f0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd cryptd snd glue_helper joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_net net_failover syscopyarea virtio_blk failover virtio_console sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix crc32c_intel serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_connmark_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
ff9721d32b |
net/sched: act_mirred: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action mirred ingress mirror dev lo pass
# tc actions replace action mirred \
> ingress mirror dev lo goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action mirred
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: mirred (Ingress Mirror to device lo) goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
Mirror/redirect action on
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 47 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa772404b7ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9c5afc3f4300 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9c5afdba9380 RDI: 0000000000029380
RBP: ffffa772404b7b70 R08: ffff9c5af7010028 R09: ffff9c5af7010029
R10: 0000000000000000 R11: ffff9c5af94c6a38 R12: ffff9c5af7953000
R13: ffff9c5af7953008 R14: 0000000000000001 R15: ffff9c5af7953d00
FS: 0000000000000000(0000) GS:ffff9c5afdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c514004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_mirred veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_codec mbcache ghash_clmulni_intel jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer snd crypto_simd cryptd glue_helper soundcore virtio_balloon joydev pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm virtio_blk net_failover virtio_console failover drm ata_piix crc32c_intel virtio_pci serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_mirred_init() proved to fix the
above issue. For the same reason, postpone the assignment of tcfa_action
and tcfm_eaction to avoid partial reconfiguration of a mirred rule when
it's replaced by another one that mirrors to a device that does not
exist. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
11a94d7fd8 |
net/sched: act_ife: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action ife encode allow mark pass index 90
# tc actions replace action ife \
> encode allow mark goto chain 42 index 90 cookie c1a0c1a0
# tc action show action ife
had the following output:
IFE type 0xED3E
IFE type 0xED3E
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: ife encode action goto chain 42 type 0XED3E
allow mark
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007b4e7067 P4D 800000007b4e7067 PUD 7b4e6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 164 Comm: kworker/2:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa6a7c0553ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9796ee1bbd00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffa6a7c0553b70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9797385bb038 R12: ffff9796ead9d700
R13: ffff9796ead9d708 R14: 0000000000000001 R15: ffff9796ead9d800
FS: 0000000000000000(0000) GS:ffff97973db00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c41e006 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_gact act_meta_mark act_ife dummy veth ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd snd cryptd glue_helper virtio_balloon joydev pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl virtio_net drm_kms_helper virtio_blk net_failover syscopyarea failover sysfillrect virtio_console sysimgblt fb_sys_fops ttm drm crc32c_intel serio_raw ata_piix virtio_pci virtio_ring libata virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_ife]
CR2: 0000000000000000
Validating the control action within tcf_ife_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
0da2dbd602 |
net/sched: act_gact: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action gact pass index 90
# tc actions replace action gact \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action gact
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: gact action goto chain 42
random type none pass val 0
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff8c2434703be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c23ed6d7e00 RCX: 000000000000005a
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c23ed6d7e00
RBP: ffff8c2434703c80 R08: ffff8c243b639ac8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2429e68b00
R13: ffff8c2429e68b08 R14: 0000000000000001 R15: ffff8c2429c5a480
FS: 0000000000000000(0000) GS:ffff8c2434700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000002dc0e005 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 74 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffff9c8640387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff8b2184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000eb57882b36cc3 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_gact act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core mbcache jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper virtio_balloon joydev pcspkr snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea virtio_net sysfillrect net_failover virtio_blk sysimgblt fb_sys_fops virtio_console ttm failover drm crc32c_intel serio_raw ata_piix libata floppy virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
CR2: 0000000000000000
Validating the control action within tcf_gact_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
f5c29d8386 |
net/sched: act_csum: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall action csum icmp pass index 90
# tc actions replace action csum icmp goto chain 42 index 90 \
> cookie c1a0c1a0
# tc actions show action csum
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: csum (icmp) action goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000074692067 P4D 8000000074692067 PUD 2e210067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff93153da03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9314ee40f700 RCX: 0000000000003a00
RDX: 0000000000000000 RSI: ffff931537c87828 RDI: ffff931537c87818
RBP: ffff93153da03c80 R08: 00000000527cffff R09: 0000000000000003
R10: 000000000000003f R11: 0000000000000028 R12: ffff9314edf68400
R13: ffff9314edf68408 R14: 0000000000000001 R15: ffff9314ed67b600
FS: 0000000000000000(0000) GS:ffff93153da00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073e32003 CR4: 00000000001606f0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 66 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffffff9a803e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff99e184f0 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000000
RBP: 0000000000000000 R08: 000eb5c4572376b3 R09: 0000000000000000
R10: ffffa53e806a3ca0 R11: 00000000000f4240 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_kernel+0x49e/0x4be
secondary_startup_64+0xa4/0xb0
Modules linked in: act_csum veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel mbcache snd_hda_codec jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt net_failover fb_sys_fops virtio_console virtio_blk ttm failover drm ata_piix crc32c_intel floppy virtio_pci serio_raw libata virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_csum_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
4e1810049c |
net/sched: act_bpf: validate the control action inside init()
the following script:
# tc filter add dev crash0 egress matchall \
> action bpf bytecode '1,6 0 0 4294967295' pass index 90
# tc actions replace action bpf \
> bytecode '1,6 0 0 4294967295' goto chain 42 index 90 cookie c1a0c1a0
# tc action show action bpf
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: bpf bytecode '1,6 0 0 4294967295' default-action goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb3a0803dfa90 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff942b347ada00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffb3a08034d038 RDI: ffff942b347ada00
RBP: ffffb3a0803dfb30 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffb3a0803dfb0c R12: ffff942b3b682b00
R13: ffff942b3b682b08 R14: 0000000000000001 R15: ffff942b3b682f00
FS: 00007f6160a72740(0000) GS:ffff942b3da80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000795a4002 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip_finish_output2+0x16f/0x430
ip_finish_output2+0x16f/0x430
? ip_output+0x69/0xe0
ip_output+0x69/0xe0
? ip_forward_options+0x1a0/0x1a0
ip_send_skb+0x15/0x40
raw_sendmsg+0x8e1/0xbd0
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xa0
? try_to_wake_up+0x54/0x480
? ldsem_down_read+0x3f/0x280
? _cond_resched+0x15/0x40
? down_read+0xe/0x30
? copy_termios+0x1e/0x70
? tty_mode_ioctl+0x1b6/0x4c0
? sock_sendmsg+0x36/0x40
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
? do_vfs_ioctl+0xa4/0x640
? handle_mm_fault+0xdc/0x210
? syscall_trace_enter+0x1df/0x2e0
? __audit_syscall_exit+0x216/0x260
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f615f7e3c03
Code: 48 8b 0d 90 62 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 9d c3 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
RSP: 002b:00007ffee5d8cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055a4f28f1700 RCX: 00007f615f7e3c03
RDX: 0000000000000040 RSI: 000055a4f28f1700 RDI: 0000000000000003
RBP: 00007ffee5d8e340 R08: 000055a4f28ee510 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 000055a4f28f16c0 R14: 000055a4f28ef69c R15: 0000000000000080
Modules linked in: act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache crct10dif_pclmul jbd2 crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper pcspkr joydev virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_blk virtio_net virtio_console net_failover failover syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ata_piix serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_bpf_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
85d0966fa5 |
net/sched: prepare TC actions to properly validate the control action
- pass a pointer to struct tcf_proto in each actions's init() handler, to allow validating the control action, checking whether the chain exists and (eventually) refcounting it. - remove code that validates the control action after a successful call to the action's init() handler, and replace it with a test that forbids addition of actions having 'goto_chain' and NULL goto_chain pointer at the same time. - add tcf_action_check_ctrlact(), that will validate the control action and eventually allocate the action 'goto_chain' within the init() handler. - add tcf_action_set_ctrlact(), that will assign the control action and swap the current 'goto_chain' pointer with the new given one. This disallows 'goto_chain' on actions that don't initialize it properly in their init() handler, i.e. calling tcf_action_check_ctrlact() after successful IDR reservation and then calling tcf_action_set_ctrlact() to assign 'goto_chain' and 'tcf_action' consistently. By doing this, the kernel does not leak anymore refcounts when a valid 'goto chain' handle is replaced in TC actions, causing kmemleak splats like the following one: # tc chain add dev dd0 chain 42 ingress protocol ip flower \ > ip_proto tcp action drop # tc chain add dev dd0 chain 43 ingress protocol ip flower \ > ip_proto udp action drop # tc filter add dev dd0 ingress matchall \ > action gact goto chain 42 index 66 # tc filter replace dev dd0 ingress matchall \ > action gact goto chain 43 index 66 # echo scan >/sys/kernel/debug/kmemleak <...> unreferenced object 0xffff93c0ee09f000 (size 1024): comm "tc", pid 2565, jiffies 4295339808 (age 65.426s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0 [<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0 [<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110 [<000000006126a348>] netlink_unicast+0x1a0/0x250 [<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0 [<00000000a25a2171>] sock_sendmsg+0x36/0x40 [<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0 [<00000000d0422042>] __sys_sendmsg+0x5e/0xa0 [<000000007a6c61f9>] do_syscall_64+0x5b/0x180 [<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<0000000013eaa334>] 0xffffffffffffffff Fixes: |
||
David S. Miller
|
e0831ef716 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) Remove a direct dependency with IPv6 introduced by the sip_external_media feature, from Alin Nastac. 2) Fix bogus ENOENT when removing interval elements from set. 3) Set transport_header from br_netfilter to mimic the stack behaviour, this partially fixes a checksum validation bug from the SCTP connection tracking, from Xin Long. 4) Fix undefined reference to symbol in xt_TEE, due to missing Kconfig dependencies, from Arnd Bergmann. 5) Check for NULL in skb_header_pointer() calls in ip6t_shr, from Kangjie Lu. 6) Fix bogus EBUSY when removing an existing conntrack helper from a transaction. 7) Fix module autoload of the redirect extension. 8) Remove duplicated transition in flowtable diagram in the existing documentation. 9) Missing .release_ops call from error path in newrule() which results module refcount leak, from Taehee Yoo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
YueHaibing
|
ceabee6c59 |
genetlink: Fix a memory leak on error path
In genl_register_family(), when idr_alloc() fails,
we forget to free the memory we possibly allocate for
family->attrbuf.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
|
||
Erik Hugne
|
33872d79f5 |
tipc: fix cancellation of topology subscriptions
When cancelling a subscription, we have to clear the cancel bit in the
request before iterating over any established subscriptions with memcmp.
Otherwise no subscription will ever be found, and it will not be
possible to explicitly unsubscribe individual subscriptions.
Fixes:
|
||
|
Xin Long
|
ef82bcfa67 |
sctp: use memdup_user instead of vmemdup_user
In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates memory with addrs_size which is passed from userspace. We used flag GFP_USER to put some more restrictions on it in Commit |
||
|
Xin Long
|
1c87e79a00 |
ipv6: make ip6_create_rt_rcu return ip6_null_entry instead of NULL
Jianlin reported a crash:
[ 381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
[ 381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160
[ 382.009615] Call Trace:
[ 382.020762] <IRQ>
[ 382.030174] ip6_route_redirect.isra.52+0xc9/0xf0
[ 382.050984] ip6_redirect+0xb6/0xf0
[ 382.066731] icmpv6_notify+0xca/0x190
[ 382.083185] ndisc_redirect_rcv+0x10f/0x160
[ 382.102569] ndisc_rcv+0xfb/0x100
[ 382.117725] icmpv6_rcv+0x3f2/0x520
[ 382.133637] ip6_input_finish+0xbf/0x460
[ 382.151634] ip6_input+0x3b/0xb0
[ 382.166097] ipv6_rcv+0x378/0x4e0
It was caused by the lookup function __ip6_route_redirect() returns NULL in
fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL.
So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry
instead of NULL.
v1->v2:
- move down 'fallback:' to make it more readable.
Fixes:
|
||
Christoph Paasch
|
398f0132c1 |
net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec
Since commit |
||
Ilya Dryomov
|
bb229bbb3b |
libceph: wait for latest osdmap in ceph_monc_blacklist_add()
Because map updates are distributed lazily, an OSD may not know about
the new blacklist for quite some time after "osd blacklist add" command
is completed. This makes it possible for a blacklisted but still alive
client to overwrite a post-blacklist update, resulting in data
corruption.
Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using
the post-blacklist epoch for all post-blacklist requests ensures that
all such requests "wait" for the blacklist to come into force on their
respective OSDs.
Cc: stable@vger.kernel.org
Fixes:
|
||
Taehee Yoo
|
b25a31bf0c |
netfilter: nf_tables: add missing ->release_ops() in error path of newrule()
->release_ops() callback releases resources and this is used in error path.
If nf_tables_newrule() fails after ->select_ops(), it should release
resources. but it can not call ->destroy() because that should be called
after ->init().
At this point, ->release_ops() should be used for releasing resources.
Test commands:
modprobe -rv xt_tcpudp
iptables-nft -I INPUT -m tcp <-- error command
lsmod
Result:
Module Size Used by
xt_tcpudp 20480 2 <-- it should be 0
Fixes:
|
||
Vinay K Nallamothu
|
f84532ce58 |
mpls: Fix 6PE forwarding
This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6
nexthop to connect IPv6 islands over IPv4 only MPLS network core.
Prior to this fix, to find the link-layer destination mac address, 6PE
enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6
nexthop address over the interface facing the IPv4 only core which
wouldn't success as the core is IPv6 free.
This fix changes that behavior on 6PE host to treat the nexthop as IPv4
address and send ARP requests whenever the next-hop address is an
IPv4-mapped IPv6 address.
Below topology illustrates the issue and how the patch addresses it.
abcd::1.1.1.1 (lo) abcd::2.2.2.2 (lo)
R0 (PE/host)------------------------R1--------------------------------R2 (PE/host)
<--- IPv4 MPLS core ---> <------ IPv4 MPLS core -------->
eth1 eth2 eth3 eth4
172.18.0.10 172.18.0.11 172.19.0.11 172.19.0.12
ffff::172.18.0.10 ffff::172.19.0.12
<------------------IPv6 MPLS tunnel ---------------------->
R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels
between R0,R1 and R1,R2.
docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1
docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4
docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3
docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2
With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2,
using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for
172.18.18.0.11.
Signed-off-by: Vinay K Nallamothu <nvinay@juniper.net>
Tested-by: Avinash Lingala <ar977m@att.com>
Tested-by: Aravind Srinivas Srinivasa Prabhakar <aprabh@juniper.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Eric Dumazet
|
e0aa67709f |
dccp: do not use ipv6 header for ipv4 flow
When a dual stack dccp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or
inet6_iif() helper.
Fixes:
|
||
|
Eric Dumazet
|
89e4130939 |
tcp: do not use ipv6 header for ipv4 flow
When a dual stack tcp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or tcp_v6_iif() helper. Fixes: |
||
Aditya Pakki
|
d7737d4257 |
nfc: Fix to check for kmemdup failure
In case of kmemdup failure while setting the service name the patch returns -ENOMEM upstream for processing. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
YueHaibing
|
a3e23f719f |
net-sysfs: call dev_hold if kobject_init_and_add success
In netdev_queue_add_kobject and rx_queue_add_kobject,
if sysfs_create_group failed, kobject_put will call
netdev_queue_release to decrease dev refcont, however
dev_hold has not be called. So we will see this while
unregistering dev:
unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
|
||
|
Xin Long
|
b59c19d9d9 |
sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_STREAM_SCHEDULER sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_STREAM_SCHEDULER sockopt.
Fixes:
|
||
|
Xin Long
|
995186193f |
sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_EVENT sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_EVENT sockopt.
Fixes:
|
||
|
Xin Long
|
9430ff9926 |
sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_ENABLE_STREAM_RESET sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_ENABLE_STREAM_RESET sockopt.
Fixes:
|
||
|
Xin Long
|
cbb45c6cd5 |
sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_PRINFO sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_PRINFO sockopt.
Fixes:
|
||
|
Xin Long
|
200f3a3bcb |
sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DEACTIVATE_KEY sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DEACTIVATE_KEY sockopt.
Fixes:
|
||
|
Xin Long
|
220675eb2e |
sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DELETE_KEY sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DELETE_KEY sockopt.
Fixes:
|
||
|
Xin Long
|
06b39e8506 |
sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_ACTIVE_KEY sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_ACTIVE_KEY sockopt.
Fixes:
|