Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.
It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.
However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.
Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).
Update existing code comments to reflect the new state of affairs.
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given a schedule:
timer1 cb timer2 cb
bpf_timer_cancel(timer2); bpf_timer_cancel(timer1);
Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.
Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.
Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.
Background on prior attempts:
Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.
lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;
The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.
It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.
Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel.
Reported-by: Dohyun Kim <dohyunkim@google.com>
Reported-by: Neel Natu <neelnatu@google.com>
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I realized this while having a map containing both a struct bpf_timer and
a struct bpf_wq: the third argument provided to the bpf_wq callback is
not the struct bpf_wq pointer itself, but the pointer to the value in
the map.
Which means that the users need to double cast the provided "value" as
this is not a struct bpf_wq *.
This is a change of API, but there doesn't seem to be much users of bpf_wq
right now, so we should be able to go with this right now.
Fixes: 81f1d7a583 ("bpf: wq: add bpf_wq_set_callback_impl")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240708-fix-wq-v2-1-667e5c9fbd99@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, kfunc declarations in bpf_kfuncs.h (and others) used "user
facing" types for kfuncs prototypes while the actual kfunc definitions
used "kernel facing" types. More specifically: bpf_dynptr vs
bpf_dynptr_kern, __sk_buff vs sk_buff, and xdp_md vs xdp_buff.
It wasn't an issue before, as the verifier allows aliased types.
However, since we are now generating kfunc prototypes in vmlinux.h (in
addition to keeping bpf_kfuncs.h around), this conflict creates
compilation errors.
Fix this conflict by using "user facing" types in kfunc definitions.
This results in more casts, but otherwise has no additional runtime
cost.
Note, similar to 5b268d1ebc ("bpf: Have bpf_rdonly_cast() take a const
pointer"), we also make kfuncs take const arguments where appropriate in
order to make the kfunc more permissive.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/b58346a63a0e66bc9b7504da751b526b0b189a67.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add three new kfuncs for the bits iterator:
- bpf_iter_bits_new
Initialize a new bits iterator for a given memory area. Due to the
limitation of bpf memalloc, the max number of words (8-byte units) that
can be iterated over is limited to (4096 / 8).
- bpf_iter_bits_next
Get the next bit in a bpf_iter_bits
- bpf_iter_bits_destroy
Destroy a bpf_iter_bits
The bits iterator facilitates the iteration of the bits of a memory area,
such as cpumask. It can be used in any context and on any address.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240517023034.48138-2-laoar.shao@gmail.com
Add crypto API support to BPF to be able to decrypt or encrypt packets
in TC/XDP BPF programs. Special care should be taken for initialization
part of crypto algo because crypto alloc) doesn't work with preemtion
disabled, it can be run only in sleepable BPF program. Also async crypto
is not supported because of the very same issue - TC/XDP BPF programs
are not sleepable.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240422225024.2847039-2-vadfed@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Introduce two new BPF kfuncs, bpf_preempt_disable and
bpf_preempt_enable. These kfuncs allow disabling preemption in BPF
programs. Nesting is allowed, since the intended use cases includes
building native BPF spin locks without kernel helper involvement. Apart
from that, this can be used to per-CPU data structures for cases where
programs (or userspace) may preempt one or the other. Currently, while
per-CPU access is stable, whether it will be consistent is not
guaranteed, as only migration is disabled for BPF programs.
Global functions are disallowed from being called, but support for them
will be added as a follow up not just preempt kfuncs, but rcu_read_lock
kfuncs as well. Static subprog calls are permitted. Sleepable helpers
and kfuncs are disallowed in non-preemptible regions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240424031315.2757363-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__bpf_prog_enter_sleepable_recur does recursion check which is not applicable
to wq callback. The callback function is part of bpf program and bpf prog might
be running on the same cpu. So recursion check would incorrectly prevent
callback from running. The code can call __bpf_prog_enter_sleepable(), but
run_ctx would be fake, hence use explicit rcu_read_lock_trace();
migrate_disable(); to address this problem. Another reason to open code is
__bpf_prog_enter* are not available in !JIT configs.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404241719.IIGdpAku-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202404241811.FFV4Bku3-lkp@intel.com/
Fixes: eb48f6cd41 ("bpf: wq: add bpf_wq_init")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To support sleepable async callbacks, we need to tell push_async_cb()
whether the cb is sleepable or not.
The verifier now detects that we are in bpf_wq_set_callback_impl and
can allow a sleepable callback to happen.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-13-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We need to teach the verifier about the second argument which is declared
as void * but which is of type KF_ARG_PTR_TO_MAP. We could have dropped
this extra case if we declared the second argument as struct bpf_map *,
but that means users will have to do extra casting to have their program
compile.
We also need to duplicate the timer code for the checking if the map
argument is matching the provided workqueue.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-11-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently bpf_wq_cancel_and_free() is just a placeholder as there is
no memory allocation for bpf_wq just yet.
Again, duplication of the bpf_timer approach
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-9-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Same reason than most bpf_timer* functions, we need almost the same for
workqueues.
So extract the generic part out of it so bpf_wq_cancel_and_free can reuse
it.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-4-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the same way we have a generic __bpf_async_init(), we also need
to share code between timer and workqueue for the set_callback call.
We just add an unused flags parameter, as it will be used for workqueues.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-3-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To be able to add workqueues and reuse most of the timer code, we need
to make bpf_hrtimer more generic.
There is no code change except that the new struct gets a new u64 flags
attribute. We are still below 2 cache lines, so this shouldn't impact
the current running codes.
The ordering is also changed. Everything related to async callback
is now on top of bpf_hrtimer.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-1-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Found the following typos in comments, and fixed them:
s/unpriviledged/unprivileged/
s/reponsible/responsible/
s/possiblities/possibilities/
s/Divison/Division/
s/precsion/precision/
s/havea/have a/
s/reponsible/responsible/
s/responsibile/responsible/
s/tigher/tighter/
s/respecitve/respective/
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/6af7deb4-bb24-49e8-b3f1-8dd410597337@smtp-relay.sendinblue.com
Currently, a set of core BPF kfuncs (e.g. bpf_task_*, bpf_cgroup_*,
bpf_cpumask_*, etc) cannot be invoked from BPF_PROG_TYPE_SYSCALL
programs. The whitelist approach taken for enabling kfuncs makes sense:
it not safe to call these kfuncs from every program type. For example,
it may not be safe to call bpf_task_acquire() in an fentry to
free_task().
BPF_PROG_TYPE_SYSCALL, on the other hand, is a perfectly safe program
type from which to invoke these kfuncs, as it's a very controlled
environment, and we should never be able to run into any of the typical
problems such as recursive invoations, acquiring references on freeing
kptrs, etc. Being able to invoke these kfuncs would be useful, as
BPF_PROG_TYPE_SYSCALL can be invoked with BPF_PROG_RUN, and would
therefore enable user space programs to synchronously call into BPF to
manipulate these kptrs.
This patch therefore enables invoking the aforementioned core kfuncs
from BPF_PROG_TYPE_SYSCALL progs.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240405143041.632519-2-void@manifault.com
Add a simple bpf_modify_return_test_tp() kfunc, available to all program
types, that is useful for various testing and benchmarking scenarios, as
it allows to trigger most tracing BPF program types from BPF side,
allowing to do complex testing and benchmarking scenarios.
It is also attachable to for fmod_ret programs, making it a good and
simple way to trigger fmod_ret program under test/benchmark.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With [1], crash dump specific code is moved out of CONFIG_KEXEC_CORE
and placed under CONFIG_CRASH_DUMP, where it is more appropriate.
And since CONFIG_KEXEC & !CONFIG_CRASH_DUMP build option is supported
with that, it led to the below warning:
"WARN: resolve_btfids: unresolved symbol crash_kexec"
Fix it by using the appropriate #ifdef.
[1] https://lore.kernel.org/all/20240124051254.67105-1-bhe@redhat.com/
Acked-by: Baoquan He <bhe@redhat.com>
Fixes: 02aff84805 ("crash: split crash dumping code out from kexec_core.c")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319080152.36987-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently bpf_get_current_pid_tgid() is allowed in tracing, cgroup
and sk_msg progs while bpf_get_ns_current_pid_tgid() is only allowed
in tracing progs.
We have an internal use case where for an application running
in a container (with pid namespace), user wants to get
the pid associated with the pid namespace in a cgroup bpf
program. Currently, cgroup bpf progs already allow
bpf_get_current_pid_tgid(). Let us allow bpf_get_ns_current_pid_tgid()
as well.
With auditing the code, bpf_get_current_pid_tgid() is also used
by sk_msg prog. But there are no side effect to expose these two
helpers to all prog types since they do not reveal any kernel specific
data. The detailed discussion is in [1].
So with this patch, both bpf_get_current_pid_tgid() and bpf_get_ns_current_pid_tgid()
are put in bpf_base_func_proto(), making them available to all
program types.
[1] https://lore.kernel.org/bpf/20240307232659.1115872-1-yonghong.song@linux.dev/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184854.2975190-1-yonghong.song@linux.dev
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZeEKVAAKCRDbK58LschI
g7oYAQD5Jlv4fIVTvxvfZrTTZ2tU+OsPa75mc8SDKwpash3YygEA8kvESy8+t6pg
D6QmSf1DIZdFoSp/bV+pfkNWMeR8gwg=
=mTAj
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following race is possible between bpf_timer_cancel_and_free
and bpf_timer_cancel. It will lead a UAF on the timer->timer.
bpf_timer_cancel();
spin_lock();
t = timer->time;
spin_unlock();
bpf_timer_cancel_and_free();
spin_lock();
t = timer->timer;
timer->timer = NULL;
spin_unlock();
hrtimer_cancel(&t->timer);
kfree(t);
/* UAF on t */
hrtimer_cancel(&t->timer);
In bpf_timer_cancel_and_free, this patch frees the timer->timer
after a rcu grace period. This requires a rcu_head addition
to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init,
this does not need a kfree_rcu because it is still under the
spin_lock and timer->timer has not been visible by others yet.
In bpf_timer_cancel, rcu_read_lock() is added because this helper
can be used in a non rcu critical section context (e.g. from
a sleepable bpf prog). Other timer->timer usages in helpers.c
have been audited, bpf_timer_cancel() is the only place where
timer->timer is used outside of the spin_lock.
Another solution considered is to mark a t->flag in bpf_timer_cancel
and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free,
it busy waits for the flag to be cleared before kfree(t). This patch
goes with a straight forward solution and frees timer->timer after
a rcu grace period.
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev
Currently tracing is supposed not to allow for bpf_spin_{lock,unlock}()
helper calls. This is to prevent deadlock for the following cases:
- there is a prog (prog-A) calling bpf_spin_{lock,unlock}().
- there is a tracing program (prog-B), e.g., fentry, attached
to bpf_spin_lock() and/or bpf_spin_unlock().
- prog-B calls bpf_spin_{lock,unlock}().
For such a case, when prog-A calls bpf_spin_{lock,unlock}(),
a deadlock will happen.
The related source codes are below in kernel/bpf/helpers.c:
notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
notrace is supposed to prevent fentry prog from attaching to
bpf_spin_{lock,unlock}().
But actually this is not the case and fentry prog can successfully
attached to bpf_spin_lock(). Siddharth Chintamaneni reported
the issue in [1]. The following is the macro definition for
above BPF_CALL_1:
#define BPF_CALL_x(x, name, ...) \
static __always_inline \
u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \
u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)) \
{ \
return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
} \
static __always_inline \
u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__))
#define BPF_CALL_1(name, ...) BPF_CALL_x(1, name, __VA_ARGS__)
The notrace attribute is actually applied to the static always_inline function
____bpf_spin_{lock,unlock}(). The actual callback function
bpf_spin_{lock,unlock}() is not marked with notrace, hence
allowing fentry prog to attach to two helpers, and this
may cause the above mentioned deadlock. Siddharth Chintamaneni
actually has a reproducer in [2].
To fix the issue, a new macro NOTRACE_BPF_CALL_1 is introduced which
will add notrace attribute to the original function instead of
the hidden always_inline function and this fixed the problem.
[1] https://lore.kernel.org/bpf/CAE5sdEigPnoGrzN8WU7Tx-h-iFuMZgW06qp0KHWtpvoXxf1OAQ@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAE5sdEg6yUc_Jz50AnUXEEUh6O73yQ1Z6NV2srJnef0ZrQkZew@mail.gmail.com/
Fixes: d83525ca62 ("bpf: introduce bpf_spin_lock")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240207070102.335167-1-yonghong.song@linux.dev
Since 20d59ee551 ("libbpf: add bpf_core_cast() macro"), libbpf is now
exporting a const arg version of bpf_rdonly_cast(). This causes the
following conflicting type error when generating kfunc prototypes from
BTF:
In file included from skeleton/pid_iter.bpf.c:5:
/home/dxu/dev/linux/tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_core_read.h:297:14: error: conflicting types for 'bpf_rdonly_cast'
extern void *bpf_rdonly_cast(const void *obj__ign, __u32 btf_id__k) __ksym __weak;
^
./vmlinux.h:135625:14: note: previous declaration is here
extern void *bpf_rdonly_cast(void *obj__ign, u32 btf_id__k) __weak __ksym;
This is b/c the kernel defines bpf_rdonly_cast() with non-const arg.
Since const arg is more permissive and thus backwards compatible, we
change the kernel definition as well to avoid conflicting type errors.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/dfd3823f11ffd2d4c838e961d61ec9ae8a646773.1707080349.git.dxu@dxuuu.xyz
This commit marks kfuncs as such inside the .BTF_ids section. The upshot
of these annotations is that we'll be able to automatically generate
kfunc prototypes for downstream users. The process is as follows:
1. In source, use BTF_KFUNCS_START/END macro pair to mark kfuncs
2. During build, pahole injects into BTF a "bpf_kfunc" BTF_DECL_TAG for
each function inside BTF_KFUNCS sets
3. At runtime, vmlinux or module BTF is made available in sysfs
4. At runtime, bpftool (or similar) can look at provided BTF and
generate appropriate prototypes for functions with "bpf_kfunc" tag
To ensure future kfunc are similarly tagged, we now also return error
inside kfunc registration for untagged kfuncs. For vmlinux kfuncs,
we also WARN(), as initcall machinery does not handle errors.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/e55150ceecbf0a5d961e608941165c0bee7bc943.1706491398.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of performing unconditional system-wide bpf_capable() and
perfmon_capable() calls inside bpf_base_func_proto() function (and other
similar ones) to determine eligibility of a given BPF helper for a given
program, use previously recorded BPF token during BPF_PROG_LOAD command
handling to inform the decision.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-8-andrii@kernel.org
The motivation of inlining bpf_kptr_xchg() comes from the performance
profiling of bpf memory allocator benchmark. The benchmark uses
bpf_kptr_xchg() to stash the allocated objects and to pop the stashed
objects for free. After inling bpf_kptr_xchg(), the performance for
object free on 8-CPUs VM increases about 2%~10%. The inline also has
downside: both the kasan and kcsan checks on the pointer will be
unavailable.
bpf_kptr_xchg() can be inlined by converting the calling of
bpf_kptr_xchg() into an atomic_xchg() instruction. But the conversion
depends on two conditions:
1) JIT backend supports atomic_xchg() on pointer-sized word
2) For the specific arch, the implementation of xchg is the same as
atomic_xchg() on pointer-sized words.
It seems most 64-bit JIT backends satisfies these two conditions. But
as a precaution, defining a weak function bpf_jit_supports_ptr_xchg()
to state whether such conversion is safe and only supporting inline for
64-bit host.
For x86-64, it supports BPF_XCHG atomic operation and both xchg() and
atomic_xchg() use arch_xchg() to implement the exchange, so enabling the
inline of bpf_kptr_xchg() on x86-64 first.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure the various dtor functions match their prototype and retain
their CFI signatures, since they don't have their address taken, they
are prone to not getting CFI, making them impossible to call
indirectly.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231215092707.799451071@infradead.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Registering generic_kfunc_set with XDP programs enables some of the
newer BPF features inside XDP -- namely tree based data structures and
BPF exceptions.
The current motivation for this commit is to enable assertions inside
XDP bpf progs. Assertions are a standard and useful tool to encode
intent.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/d07d4614b81ca6aada44fcb89bb6b618fb66e4ca.1702594357.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of performing unconditional system-wide bpf_capable() and
perfmon_capable() calls inside bpf_base_func_proto() function (and other
similar ones) to determine eligibility of a given BPF helper for a given
program, use previously recorded BPF token during BPF_PROG_LOAD command
handling to inform the decision.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A new kfunc is added to acquire cgroup1 of a task:
- bpf_task_get_cgroup1
Acquires the associated cgroup of a task whithin a specific cgroup1
hierarchy. The cgroup1 hierarchy is identified by its hierarchy ID.
This new kfunc enables the tracing of tasks within a designated
container or cgroup directory in BPF programs.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231111090034.4248-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The use of bpf_mem_free_rcu to free refcounted local kptrs was added
in commit 7e26cd12ad ("bpf: Use bpf_mem_free_rcu when
bpf_obj_dropping refcounted nodes"). In the cover letter for the
series containing that patch [0] I commented:
Perhaps it makes sense to move to mem_free_rcu for _all_
non-owning refs in the future, not just refcounted. This might
allow custom non-owning ref lifetime + invalidation logic to be
entirely subsumed by MEM_RCU handling. IMO this needs a bit more
thought and should be tackled outside of a fix series, so it's not
attempted here.
It's time to start moving in the "non-owning refs have MEM_RCU
lifetime" direction. As mentioned in that comment, using
bpf_mem_free_rcu for all local kptrs - not just refcounted - is
necessarily the first step towards that goal. This patch does so.
After this patch the memory pointed to by all local kptrs will not be
reused until RCU grace period elapses. The verifier's understanding of
non-owning ref validity and the clobbering logic it uses to enforce
that understanding are not changed here, that'll happen gradually in
future work, including further patches in the series.
[0]: https://lore.kernel.org/all/20230821193311.3290257-1-davemarchevsky@fb.com/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20231107085639.3016113-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refcounted local kptrs are kptrs to user-defined types with a
bpf_refcount field. Recent commits ([0], [1]) modified the lifetime of
refcounted local kptrs such that the underlying memory is not reused
until RCU grace period has elapsed.
Separately, verification of bpf_refcount_acquire calls currently
succeeds for MAYBE_NULL non-owning reference input, which is a problem
as bpf_refcount_acquire_impl has no handling for this case.
This patch takes advantage of aforementioned lifetime changes to tag
bpf_refcount_acquire_impl kfunc KF_RCU, thereby preventing MAYBE_NULL
input to the kfunc. The KF_RCU flag applies to all kfunc params; it's
fine for it to apply to the void *meta__ign param as that's populated by
the verifier and is tagged __ign regardless.
[0]: commit 7e26cd12ad ("bpf: Use bpf_mem_free_rcu when
bpf_obj_dropping refcounted nodes") is the actual change to
allocation behaivor
[1]: commit 0816b8c6bf ("bpf: Consider non-owning refs to refcounted
nodes RCU protected") modified verifier understanding of
refcounted local kptrs to match [0]'s changes
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Fixes: 7c50b1cb76 ("bpf: Add bpf_refcount_acquire kfunc")
Link: https://lore.kernel.org/r/20231107085639.3016113-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Different types of bpf dynptr have different internal data storage.
Specifically, SKB and XDP type of dynptr may have non-continuous data.
Therefore, it is not always safe to directly access dynptr->data.
Add __bpf_dynptr_data and __bpf_dynptr_data_rw to replace direct access to
dynptr->data.
Update bpf_verify_pkcs7_signature to use __bpf_dynptr_data instead of
dynptr->data.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/bpf/20231107045725.2278852-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When there are concurrent uref release and bpf timer init operations,
the following sequence diagram is possible. It will break the guarantee
provided by bpf_timer: bpf_timer will still be alive after userspace
application releases or unpins the map. It also will lead to kmemleak
for old kernel version which doesn't release bpf_timer when map is
released.
bpf program X:
bpf_timer_init()
lock timer->lock
read timer->timer as NULL
read map->usercnt != 0
process Y:
close(map_fd)
// put last uref
bpf_map_put_uref()
atomic_dec_and_test(map->usercnt)
array_map_free_timers()
bpf_timer_cancel_and_free()
// just return
read timer->timer is NULL
t = bpf_map_kmalloc_node()
timer->timer = t
unlock timer->lock
Fix the problem by checking map->usercnt after timer->timer is assigned,
so when there are concurrent uref release and bpf timer init, either
bpf_timer_cancel_and_free() from uref release reads a no-NULL timer
or the newly-added atomic64_read() returns a zero usercnt.
Because atomic_dec_and_test(map->usercnt) and READ_ONCE(timer->timer)
in bpf_timer_cancel_and_free() are not protected by a lock, so add
a memory barrier to guarantee the order between map->usercnt and
timer->timer. Also use WRITE_ONCE(timer->timer, x) to match the lockless
read of timer->timer in bpf_timer_cancel_and_free().
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Closes: https://lore.kernel.org/bpf/CABcoxUaT2k9hWsS1tNgXyoU3E-=PuOgMn737qK984fbFmfYixQ@mail.gmail.com
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231030063616.1653024-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.
This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].
In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.
[0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
[1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Our MPTCP CI complained [1] -- and KBuild too -- that it was no longer
possible to build the kernel without CONFIG_CGROUPS:
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_new':
kernel/bpf/task_iter.c:919:14: error: 'CSS_TASK_ITER_PROCS' undeclared (first use in this function)
919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
| ^~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c:919:14: note: each undeclared identifier is reported only once for each function it appears in
kernel/bpf/task_iter.c:919:36: error: 'CSS_TASK_ITER_THREADED' undeclared (first use in this function)
919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c:927:60: error: invalid application of 'sizeof' to incomplete type 'struct css_task_iter'
927 | kit->css_it = bpf_mem_alloc(&bpf_global_ma, sizeof(struct css_task_iter));
| ^~~~~~
kernel/bpf/task_iter.c:930:9: error: implicit declaration of function 'css_task_iter_start'; did you mean 'task_seq_start'? [-Werror=implicit-function-declaration]
930 | css_task_iter_start(css, flags, kit->css_it);
| ^~~~~~~~~~~~~~~~~~~
| task_seq_start
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_next':
kernel/bpf/task_iter.c:940:16: error: implicit declaration of function 'css_task_iter_next'; did you mean 'class_dev_iter_next'? [-Werror=implicit-function-declaration]
940 | return css_task_iter_next(kit->css_it);
| ^~~~~~~~~~~~~~~~~~
| class_dev_iter_next
kernel/bpf/task_iter.c:940:16: error: returning 'int' from a function with return type 'struct task_struct *' makes pointer from integer without a cast [-Werror=int-conversion]
940 | return css_task_iter_next(kit->css_it);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_destroy':
kernel/bpf/task_iter.c:949:9: error: implicit declaration of function 'css_task_iter_end' [-Werror=implicit-function-declaration]
949 | css_task_iter_end(kit->css_it);
| ^~~~~~~~~~~~~~~~~
This patch simply surrounds with a #ifdef the new code requiring CGroups
support. It seems enough for the compiler and this is similar to
bpf_iter_css_{new,next,destroy}() functions where no other #ifdef have
been added in kernel/bpf/helpers.c and in the selftests.
Fixes: 9c66dc94b6 ("bpf: Introduce css_task open-coded iterator kfuncs")
Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/6665206927
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260528.aHWgVFqq-lkp@intel.com/
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
[ added missing ifdefs for BTF_ID cgroup definitions ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231101181601.1493271-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following warning was reported when running "./test_progs -t
test_bpf_ma/percpu_free_through_map_free":
------------[ cut here ]------------
WARNING: CPU: 1 PID: 68 at kernel/bpf/memalloc.c:342
CPU: 1 PID: 68 Comm: kworker/u16:2 Not tainted 6.6.0-rc2+ #222
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:bpf_mem_refill+0x21c/0x2a0
......
Call Trace:
<IRQ>
? bpf_mem_refill+0x21c/0x2a0
irq_work_single+0x27/0x70
irq_work_run_list+0x2a/0x40
irq_work_run+0x18/0x40
__sysvec_irq_work+0x1c/0xc0
sysvec_irq_work+0x73/0x90
</IRQ>
<TASK>
asm_sysvec_irq_work+0x1b/0x20
RIP: 0010:unit_free+0x50/0x80
......
bpf_mem_free+0x46/0x60
__bpf_obj_drop_impl+0x40/0x90
bpf_obj_free_fields+0x17d/0x1a0
array_map_free+0x6b/0x170
bpf_map_free_deferred+0x54/0xa0
process_scheduled_works+0xba/0x370
worker_thread+0x16d/0x2e0
kthread+0x105/0x140
ret_from_fork+0x39/0x60
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
The reason is simple: __bpf_obj_drop_impl() does not know the freeing
field is a per-cpu pointer and it uses bpf_global_ma to free the
pointer. Because bpf_global_ma is not a per-cpu allocator, so ksize() is
used to select the corresponding cache. The bpf_mem_cache with 16-bytes
unit_size will always be selected to do the unmatched free and it will
trigger the warning in free_bulk() eventually.
Because per-cpu kptr doesn't support list or rb-tree now, so fix the
problem by only checking whether or not the type of kptr is per-cpu in
bpf_obj_free_fields(), and using bpf_global_percpu_ma to these kptrs.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
css_iter and task_iter should be used in rcu section. Specifically, in
sleepable progs explicit bpf_rcu_read_lock() is needed before use these
iters. In normal bpf progs that have implicit rcu_read_lock(), it's OK to
use them directly.
This patch adds a new a KF flag KF_RCU_PROTECTED for bpf_iter_task_new and
bpf_iter_css_new. It means the kfunc should be used in RCU CS. We check
whether we are in rcu cs before we want to invoke this kfunc. If the rcu
protection is guaranteed, we would let st->type = PTR_TO_STACK | MEM_RCU.
Once user do rcu_unlock during the iteration, state MEM_RCU of regs would
be cleared. is_iter_reg_valid_init() will reject if reg->type is UNTRUSTED.
It is worth noting that currently, bpf_rcu_read_unlock does not
clear the state of the STACK_ITER reg, since bpf_for_each_spilled_reg
only considers STACK_SPILL. This patch also let bpf_for_each_spilled_reg
search STACK_ITER.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-6-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This Patch adds kfuncs bpf_iter_css_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_css in open-coded iterator
style. These kfuncs actually wrapps css_next_descendant_{pre, post}.
css_iter can be used to:
1) iterating a sepcific cgroup tree with pre/post/up order
2) iterating cgroup_subsystem in BPF Prog, like
for_each_mem_cgroup_tree/cpuset_for_each_descendant_pre in kernel.
The API design is consistent with cgroup_iter. bpf_iter_css_new accepts
parameters defining iteration order and starting css. Here we also reuse
BPF_CGROUP_ITER_DESCENDANTS_PRE, BPF_CGROUP_ITER_DESCENDANTS_POST,
BPF_CGROUP_ITER_ANCESTORS_UP enums.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-5-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_task in open-coded iterator
style. BPF programs can use these kfuncs or through bpf_for_each macro to
iterate all processes in the system.
The API design keep consistent with SEC("iter/task"). bpf_iter_task_new()
accepts a specific task and iterating type which allows:
1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS)
2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS)
3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS)
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Link: https://lore.kernel.org/r/20231018061746.111364-4-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
