mirror of
https://github.com/torvalds/linux.git
synced 2024-11-20 11:01:38 +00:00
b33cdd283b
10 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dave Martin
|
33cb667a00 |
ARM: vexpress/TC2: Implement MCPM power_down_finish()
This patch implements the power_down_finish() method for TC2, to
enable the kernel to confirm when CPUs are safely powered down.
The information required for determining when a CPU is parked
cannot be obtained from any single place, so a few sources of
information must be combined:
* mcpm_cpu_power_down() must be pending for the CPU, so that we
don't get confused by false STANDBYWFI positives arising from
CPUidle. This is detected by waiting for the tc2_pm use count
for the target CPU to reach 0.
* Either the SPC must report that the CPU has asserted
STANDBYWFI, or the TC2 tile's reset control logic must be
holding the CPU in reset.
Just checking for STANDBYWFI is not sufficient, because this
signal is not latched when the the cluster is clamped off and
powered down: the relevant status bits just drop to zero. This
means that STANDBYWFI status cannot be used for reliable
detection of the last CPU in a cluster reaching WFI.
This patch is required in order for kexec to work with MCPM on TC2.
MCPM code was changed in commit
|
||
Linus Torvalds
|
f9300eaaac |
ACPI and power management updates for 3.13-rc1
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from
Mika Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki,
Naresh Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
Zhang Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JCxk
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael J Wysocki:
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...
Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c
|
||
Sudeep KarkadaNagesha
|
f7cd2d835e |
ARM: vexpress/TC2: add support for CPU DVFS
SPC(Serial Power Controller) on TC2 also controls the CPU performance operating points which is essential to provide CPU DVFS. The M3 microcontroller provides two sets of eight performance values, one set for each cluster (CA15 or CA7). Each of this value contains the frequency(kHz) and voltage(mV) at that performance level. It expects these performance level to be passed through the SPC PERF_LVL registers. This patch adds support to populate these performance levels from M3, build the mapping to CPU OPPs at the boot and then use it to get and set the CPU performance level runtime. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Pawel Moll <Pawel.Moll@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Nicolas Pitre
|
39792c7cf3 |
ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
This code is becoming duplicated in many places. So let's consolidate it into a handy macro that is known to be right and available for reuse. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Lorenzo Pieralisi
|
64270d82d4 |
ARM: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down
On the TC2 testchip, when all CPUs in a cluster enter standbywfi and commit a power down request, the power controller will wait for standbywfil2 coming from L2 cache controller to shut the cluster down. By the time all CPUs in a cluster commit a power down request and enter wfi, the power controller cannot backtrack, or put it another way, a CPU must not be allowed to complete execution independently of the power controller, the only way for it to resume properly must be upon wake-up IRQ pending and subsequent reset triggered from the power controller. Current MCPM back-end for TC2 disables the GIC CPU IF only when power down is committed through the tc2_pm_suspend() method, that makes sense since a suspended CPU is still online and can receive interrupts whereas a hotplugged CPU, since it is offline, migrated all IRQs and shutdown the per-CPU peripherals, hence their PPIs. The flaw with this reasoning is the following. If all CPUs in a clusters are entering a power down state either through CPU idle or CPU hotplug, when the last man successfully completes the MCPM power down sequence (and executes wfi), power controller waits for L2 wfi signal to quiesce the cluster and shut it down. If, when all CPUs are sitting in wfi, an online CPU hotplugs back in one of the CPUs in the cluster being shutdown, that CPU receives an IPI that causes wfi to complete (since tc2_pm_down() method does not disable the GIC CPU IF in that case - CPU being hotplugged out, not idle) and the power controller will never see the stanbywfil2 signal coming from L2 that is required for shutdown to happen and the system deadlocks. Further to this issue, kexec hotplugs secondary CPUs out during kernel reload/restart. Because kexec may (deliberately) trash the old kernel text, it is not OK for CPUs to follow the MCPM soft reboot path, since instructions after the WFI may have been replaced by kexec. If tc2_pm_down() does not disable the GIC cpu interface, there is a race between CPU powerdown in the old kernel and the IPI from the new kernel that triggers secondary boot, particularly if the powerdown is slow (due to L2 cache cleaning for example). If the new kernel wins the race, the affected CPU(s) will not really be reset and may execute garbage after the WFI. The only solution to this problem consists in disabling the GIC CPU IF on a CPU committed to power down regardless of the power down entry method (CPU hotplug or CPU idle). This way, CPU wake-up is under power controller control, which prevents unexpected wfi exit caused by a pending IRQ. This patch moves the GIC CPU IF disable call in the TC2 MCPM implementation from the tc2_pm_suspend() method to the tc2_pm_down() method to fix the mentioned race condition(s). Reviewed-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Dave Martin <Dave.Martin@arm.com> (for kexec) Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Linus Torvalds
|
a35c6322e5 |
ARM: SoC drivers for v3.12
This branch contains ARM SoC related driver updates for v3.12. The only thing this cycle are core PM updates and CPUidle support for ARM's TC2 big.LITTLE development platform. Conflicts: One cleanup/reorg conflict with a new entry in drivers/cpuidle/Makefile. Append the new entry after the existing ones. A follow up patch for v3.12-rc will make the new entry conform to the cleanup/reorg. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSLjatAAoJEFk3GJrT+8Zl32sP/Aw2iEXd/5DUvcp6y/qZoAjO oLhCPviEnQCpz4smFFySBLvvKyVyA7oOMet8nelIJhwHCTNMBpJZHIfcvpIP5uBY 6LLpFUw4m7TqOISwpVXlwc/3CuG76QCrITLJmButq6tHF4udHeAur+pAnNHoaoys O5arRMLvl5C4rREeiZctTv5JARICCxIcHpweQdtt+MZ03yG78fEfSB9XxvyOlhh0 OJnGcqU07fIXw9kT/9KAnR3Ql7JJsdzlXqLq6/wFWPe5a1KtgxHNXPbtWaxl8JWW cPSQci+n9iWgxKzoQTGyQO6sfkDHcol3izMeCScMwlx05SMPwofXpYitaPHLF1cy PtJosSMVQvJPrHyGlY4vhD9mtCIcyOmlwSlZ6dOf7oqXMhT9CPJe2UD/8JZWgXBi imY/vpU8mgZT315rQmc/Khg721VNKcSuIvP6xUS9PuaSMUrPSCJFbbkckHGnzdC7 XVFCui9gFxa7vMN+CzrZRqfZnjJ7ujuiFDauMzltu0iBiPNXkAfyoqbxMqUP1HJ5 pdU84vuEVjsUdWt9ivJs6I6cqIwroeji9HZzZnWkWyoDgtAjxhDFVXydqlhrZsuJ O3uErP8fjRtloFa2iLDZfawPpHDFsY4F+Nm09rZLO7RE4ELlYlQGfYEwuIh+kZ16 nLPE/V5DYrBVyNGDouKx =FvQD -----END PGP SIGNATURE----- Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver update from Kevin Hilman: "This contains the ARM SoC related driver updates for v3.12. The only thing this cycle are core PM updates and CPUidle support for ARM's TC2 big.LITTLE development platform" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend drivers: irq-chip: irq-gic: introduce gic_cpu_if_down() |
||
|
Lorenzo Pieralisi
|
9ee2ee0f05 |
ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend
To prevent cores from exiting wfi when they are about to be shut down the GIC CPU IF must be disabled so that the GIC CPU IF IRQ output line is not asserted to the cores. wfi completion must be prevented since, in absence of coordinating HW logic, if the power controller receives a standbywfi signal but in the meantime the processor restarts executing owing to a pending IRQ, the core might be reset when running in a non-quiescent state (eg with pending load/store transactions) Raw GIC distributor IRQ signals are routed to the power controller, that is capable of taking core out of reset on pending IRQs even if their GIC CPU IF is disabled, thus keeping the normal wfi behaviour. GIC CPU IF is restored upon CPU wake-up by the respective MCPM API consumers (ie CPU idle driver and suspend to RAM thread). Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Nicolas Pitre
|
fac2e57742 |
ARM: vexpress/MCPM: fix cache disable sequence when CONFIG_FRAME_POINTER=y
If CONFIG_FRAME_POINTER=y we get the following error: arch/arm/mach-vexpress/tc2_pm.c: In function 'tc2_pm_down': arch/arm/mach-vexpress/tc2_pm.c:200:1: error: fp cannot be used in asm here Let's fix that by explicitly preserving r11 on the stack and removing it from the clobber list. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Nicolas Pitre
|
e607b0f985 |
ARM: vexpress/TC2: implement PM suspend method
Similar to power_down(), except that for a suspend, the firmware mailbox address has to be set prior entering low power mode. The residency argument is not used yet, so the last man always shuts down the cluster for now. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> |
||
|
Nicolas Pitre
|
11b277eabe |
ARM: vexpress/TC2: basic PM support
This is the MCPM backend for the Virtual Express A15x2 A7x3 CoreTile aka TC2. This provides cluster management for SMP secondary boot and CPU hotplug. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [PM: made it drive SCC registers directly and provide base for SPC] Signed-off-by: Pawel Moll <pawel.moll@arm.com> |