Commit Graph

723855 Commits

Author SHA1 Message Date
Christoph Hellwig
b2b206957a tile: use generic swiotlb_ops
These are identical to the tile ops, and would also support CMA
if enabled on tile.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:58 +01:00
Christoph Hellwig
d3ce48eafc tile: replace ZONE_DMA with ZONE_DMA32
tile uses ZONE_DMA for allocations below 32-bits.  These days we
name the zone for that ZONE_DMA32, which will allow to use the
dma-direct and generic swiotlb code as-is, so rename it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:57 +01:00
Christoph Hellwig
90f7816206 unicore32: use generic swiotlb_ops
These are identical to the unicore32 ops, and would also support CMA
if enabled on unicore32.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:55 +01:00
Christoph Hellwig
35bd507120 ia64: remove an ifdef around the content of pci-dma.c
The file is only compiled if CONFIG_INTEL_IOMMU is set to start with.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:54 +01:00
Christoph Hellwig
4fac8076df ia64: clean up swiotlb support
Move the few remaining bits of swiotlb glue towards their callers,
and remove the pointless on ia64 swiotlb variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:53 +01:00
Christoph Hellwig
543cea9acc ia64: use generic swiotlb_ops
These are identical to the ia64 ops, and would also support CMA
if enabled on ia64.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:52 +01:00
Christoph Hellwig
d5c23ebf1b ia64: replace ZONE_DMA with ZONE_DMA32
ia64 uses ZONE_DMA for allocations below 32-bits.  These days we
name the zone for that ZONE_DMA32, which will allow to use the
dma-direct and generic swiotlb code as-is, so rename it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:51 +01:00
Christoph Hellwig
4bd89ed39b swiotlb: remove various exports
All these symbols are only used by arch dma_ops implementations or
xen-swiotlb.  None of which can be modular.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:50 +01:00
Christoph Hellwig
0176adb004 swiotlb: refactor coherent buffer allocation
Factor out a new swiotlb_alloc_buffer helper that allocates DMA coherent
memory from the swiotlb bounce buffer.

This allows to simplify the swiotlb_alloc implemenation that uses
dma_direct_alloc to try to allocate a reachable buffer first.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:49 +01:00
Christoph Hellwig
a25381aa3a swiotlb: refactor coherent buffer freeing
Factor out a new swiotlb_free_buffer helper that checks if an address
is allocated from the swiotlb bounce buffer, and if yes frees it.

This allows to simplify the swiotlb_free implemenation that uses
dma_direct_free to free the non-bounce buffer allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:48 +01:00
Christoph Hellwig
aaf796dc6e swiotlb: wire up ->dma_supported in swiotlb_dma_ops
To properly reject too small DMA masks based on the addressability of the
bounce buffer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:46 +01:00
Christoph Hellwig
251533eb35 swiotlb: add common swiotlb_map_ops
Currently all architectures that want to use swiotlb have to implement
their own dma_map_ops instances.  Provide a generic one based on the
x86 implementation which first calls into dma_direct to try a full blown
direct mapping implementation (including e.g. CMA) before falling back
allocating from the swiotlb buffer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:45 +01:00
Christoph Hellwig
7f2c8bbd32 swiotlb: rename swiotlb_free to swiotlb_exit
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-15 09:35:39 +01:00
Christoph Hellwig
9ce9765a09 x86: rename swiotlb_dma_ops
We'll need that name for a generic implementation soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-15 09:35:33 +01:00
Christoph Hellwig
a37a3710f3 powerpc: rename swiotlb_dma_ops
We'll need that name for a generic implementation soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-15 09:35:26 +01:00
Christoph Hellwig
fde25dd4c7 ia64: rename swiotlb_dma_ops
We'll need that name for a generic implementation soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-15 09:35:20 +01:00
Christoph Hellwig
b7da40949e arm64: rename swiotlb_dma_ops
We'll need that name for a generic implementation soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-01-15 09:35:19 +01:00
Christian König
d0bc0c2a31 swiotlb: suppress warning when __GFP_NOWARN is set
TTM tries to allocate coherent memory in chunks of 2MB first to improve
TLB efficiency and falls back to allocating 4K pages if that fails.

Suppress the warning when the 2MB allocations fails since there is a
valid fall back path.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104082
CC: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 09:35:18 +01:00
Christoph Hellwig
23475ad49e h8300: use dma-direct
Replace the bare-bones h8300 direct dma mapping implementation with
the fully featured generic dma-direct one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 09:35:17 +01:00
Christoph Hellwig
f73337f4ce cris: use dma-direct
cris currently has an incomplete direct mapping dma_map_ops implementation
if PCI support is enabled.  Replace it with the fully feature generic
dma-direct implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2018-01-15 09:35:16 +01:00
Christoph Hellwig
1a9777a8a0 dma-direct: reject too small dma masks
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-01-15 09:35:15 +01:00
Christoph Hellwig
19dca8c0ef dma-direct: make dma_direct_{alloc,free} available to other implementations
So that they don't need to indirect through the operation vector.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
2018-01-15 09:35:14 +01:00
Christoph Hellwig
95f183916d dma-direct: retry allocations using GFP_DMA for small masks
If an attempt to allocate memory succeeded, but isn't inside the
supported DMA mask, retry the allocation with GFP_DMA set as a
last resort.

Based on the x86 code, but an off by one error in what is now
dma_coherent_ok has been fixed vs the x86 code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 09:35:13 +01:00
Christoph Hellwig
c61e963734 dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32
This allows to dip into zones for lower memory if they are available.
If one of the zones is not available the corresponding GFP_* flag
will evaluate to 0 so they won't change anything.  We provide an
arch tunable for those architectures that do not use GFP_DMA for
the lowest 24-bits, given that there are a few.

Roughly based on the x86 code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 09:35:12 +01:00
Christoph Hellwig
21f237e4d0 dma-direct: use node local allocations for coherent memory
To preserve the x86 behavior.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-01-15 09:35:11 +01:00
Christoph Hellwig
080321d3b3 dma-direct: add support for CMA allocation
Try the CMA allocator for coherent allocations if supported.

Roughly modelled after the x86 code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 09:35:09 +01:00
Christoph Hellwig
2797596992 dma-direct: add dma address sanity checks
Roughly based on the x86 pci-nommu implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 09:35:08 +01:00
Christoph Hellwig
2e86a04780 dma-direct: use phys_to_dma
This means it uses whatever linear remapping scheme that the architecture
provides is used in the generic dma_direct ops.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
2018-01-15 09:35:07 +01:00
Christoph Hellwig
002e67454f dma-direct: rename dma_noop to dma_direct
The trivial direct mapping implementation already does a virtual to
physical translation which isn't strictly a noop, and will soon learn
to do non-direct but linear physical to dma translations through the
device offset and a few small tricks.  Rename it to a better fitting
name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
2018-01-15 09:35:06 +01:00
Christoph Hellwig
c5cd037d1c dma-mapping: provide a generic asm/dma-mapping.h
For architectures that just use the generic dma_noop_ops we can provide
a generic version of dma-mapping.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 09:35:05 +01:00
Christoph Hellwig
cea9d03c82 dma-mapping: add an arch_dma_supported hook
To implement the x86 forbid_dac and iommu_sac_force we want an arch hook
so that it can apply the global options across all dma_map_ops
implementations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-15 09:34:59 +01:00
Christoph Hellwig
57bf5a8963 dma-mapping: clear harmful GFP_* flags in common code
Lift the code from x86 so that we behave consistently.  In the future we
should probably warn if any of these is set.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
2018-01-15 09:34:55 +01:00
Christoph Hellwig
205e1b7f51 dma-mapping: warn when there is no coherent_dma_mask
These days all devices should have a DMA coherent mask, and most dma_ops
implementations rely on that fact.  But just to be sure add an assert to
ring the warning bell if that is not the case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-15 09:34:43 +01:00
Christoph Hellwig
4b1b62b67d s390: move s390_pci_dma_ops to asm/pci_dma.h
This is not needed in drivers, so move it to a private header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:19 +01:00
Christoph Hellwig
b0615c3baa microblaze: remove the dead !NOT_COHERENT_CACHE dma code
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:18 +01:00
Christoph Hellwig
a5feb607a0 microblaze: remove dma_nommu_dma_supported
Always returning 1 is the same behavior as not supplying a method at all.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:16 +01:00
Christoph Hellwig
7e05c19afb microblaze: rename dma_direct to dma_nommu
This frees the dma_direct_* namespace for a generic implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:15 +01:00
Christoph Hellwig
2d9d6f6c9e powerpc: rename dma_direct_ to dma_nommu_
We want to use the dma_direct_ namespace for a generic implementation,
so rename powerpc to the second best choice: dma_nommu_.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:14 +01:00
Christoph Hellwig
bf15f90b07 hexagon: use the generic dma_capable helper
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Kuo <rkuo@codeaurora.org>
2018-01-10 16:41:13 +01:00
Christoph Hellwig
b49efd7624 dma-mapping: move dma_mark_clean to dma-direct.h
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:12 +01:00
Christoph Hellwig
ea8c64ace8 dma-mapping: move swiotlb arch helpers to a new header
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only.  Drivers are
not supposed to use these directly, but use the DMA API instead.

Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.

In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-01-10 16:40:54 +01:00
Christoph Hellwig
10dac04c79 mips: fix an off-by-one in dma_capable
This makes it match the generic version.

Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:25:24 +01:00
Christoph Hellwig
298f0027d5 arm64: don't override dma_max_pfn
The generic version now takes dma_pfn_offset into account, so there is no
more need for an architecture override.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-01-10 16:25:18 +01:00
Christoph Hellwig
a41ef1e455 dma-mapping: take dma_pfn_offset into account in dma_max_pfn
This makes sure the generic version can be used with architectures /
devices that have a DMA offset in the direct mapping.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-01-10 16:25:06 +01:00
Christoph Hellwig
8fbc02ac62 s390: remove the unused dma_capable helper
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-09 16:28:40 +01:00
Christoph Hellwig
b8ee205af4 riscv: remove the unused dma_capable helper
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-09 16:28:39 +01:00
Christoph Hellwig
8c10fd7f88 m32r: remove the unused dma_capable helper
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-09 16:28:38 +01:00
Christoph Hellwig
57723cb363 arc: remove CONFIG_ARC_PLAT_NEEDS_PHYS_TO_DMA
We always use the stub definitions, so remove the unused other code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-09 16:28:37 +01:00
Christoph Hellwig
c91a7a405b powerpc: remove unused flush_write_buffers definition
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-09 16:28:36 +01:00
Christoph Hellwig
e61b57f0e7 m32r: remove unused flush_write_buffers definition
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-09 16:28:35 +01:00