When allocating aux buffers for postprocessing, it's assumed that base
buffer size is the same as that of output. Coincidentally, that's true
most of the time, but not always. 10-bit source also needs aux buffer
size which is appropriate for 10-bit native format, even if the output
format is 8-bit. Similarly, mv sizes and other extra buffer size also
depends on source width/height, not destination.
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In preparation for supporting 10-bit formats, add mechanism which will
filter formats based on pixel depth.
Hantro G2 supports only one decoding format natively and that is based
on bit depth of current video frame. Additionally, it makes no sense to
upconvert bitness, so filter those out too.
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The goto statement in uvc_v4l2_try_format can simply be replaced by an
direct return. There is no further user of the label, so remove it.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Two more cameras do not implement the power line control correctly. Add
a corresponding control mapping override.
Bus 001 Device 003: ID 0408:4034 Quanta Computer, Inc. ACER HD User Facing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0408 Quanta Computer, Inc.
idProduct 0x4034
bcdDevice 0.01
iManufacturer 1 Quanta
iProduct 2 ACER HD User Facing
iSerial 3 01.00.00
bNumConfigurations 1
Bus 001 Device 003: ID 0408:4030 Quanta Computer, Inc. HD User Facing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0408 Quanta Computer, Inc.
idProduct 0x4030
bcdDevice 0.02
iManufacturer 1 Quanta
iProduct 2 HD User Facing
iSerial 3 01.00.00
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Some devices do not implement all their controls in a way that complies
with the UVC specification. This is for instance the case for several
devices that do not support the disabled mode for the power line
frequency control. Add a mechanism to allow per-device control mapping
overrides to avoid errors when accessing non-compliant controls.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
UVC 1.5 class defines 4 values for this control on:
4.2.2.3.6 Power Line Frequency Control
Add the missing value when the UVC version is 1.5.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The link to the web page that explains continued fractions is broken.
Replace it with a link to the corresponding Wikipedia page.
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The uvcvideo driver historically uses the
/* Comment
* style
*/
for multi-line block comments, which is frowned upon. Patches for the
driver are required to use the more standard
/*
* Comment
* style
*/
style. This result in inconsistencies. Fix it by converting all
remaining instances of the old style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CSIS CSI-2 receiver in the i.MX8MP seems to be identical to the
version present in the i.MX8MM. Add a device-specific compatible string,
with a fallback to the i.MX8MM compatible.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CSIS is connected to its sink through an SoC-specific gasket that
needs to be configured. Depending on the platform, the gasket
configuration requires knowing the CSI-2 DT. To provide the needed
information, implement the .get_frame_desc() operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Register at offset 0x00 isn't documented, but the NXP BSP
imx8-mipi-csi2-sam driver defines it as a version register. Tests on
i.MX7D and i.MX8MP have confirmed this, with values matching the version
of the IP core specified in the respective reference manuals.
This commit doesn't make use of the version register at runtime as the
compatible strings are enough to identify the IP core version.
Nonetheless, capturing the information in register definitions that
don't affect the code negatively is useful for future development.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Endpoint matching is preferred over device matching with the async
notifier framework. Set the fwnode in the v4l2_subdev for the CSIS to
the endpoint connected to the next device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
HEVC uAPI is used by 2 mainline drivers (Hantro, Cedrus)
and at least 2 out-of-tree drivers (rkvdec, RPi).
The uAPI has been reviewed so it is time to make it 'public' by
un-staging it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
'F.7.3.6.1 General slice segment header syntax' section of HEVC
specification describes that a slice header always end aligned on
byte boundary, therefore we only need to provide the data offset in bytes.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The number of bits to skip in the slice header can be computed
in the driver by using sps, pps and decode_params information.
This makes it possible to remove Hantro dedicated control.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Simply print the type of the control.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move HEVC pixel format since we are ready to stabilize the uAPI
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The number of 'entry point offset' can be very variable.
Instead of using a large static array define a v4l2 dynamic array
of U32 (V4L2_CTRL_TYPE_U32).
The number of entry point offsets is reported by the elems field
and in struct v4l2_ctrl_hevc_slice_params.num_entry_point_offsets
field.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make explicit that V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control is
a dynamic array control type.
Some drivers may be able to receive multiple slices in one control
to improve decoding performance.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The possible values for the field_pic field in the v4l2_hevc_dpb_entry
structure are defined in the table D.2 in HEVC specification section D.3.3.
Add flags and documentation for each of them.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The HEVC specification describes the following:
"PicOrderCntVal is derived as follows:
PicOrderCntVal = PicOrderCntMsb + slice_pic_order_cnt_lsb
The value of PicOrderCntVal shall be in the range of
−2^31 to 2^31 − 1, inclusive."
To match with these definitions change __u16 pic_order_cnt[2]
into __s32 pic_order_cnt_val.
Change v4l2_ctrl_hevc_slice_params->slice_pic_order_cnt to __s32 too.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Complete the HEVC controls with missing fields from H.265 specifications.
Even if these fields aren't used by the current mainlined drivers
they will be required for (at least) the rkvdec driver.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a dynamic array test control to help test support for this
feature.
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Implement support for dynamically allocated arrays.
Most of the changes concern keeping track of the number of elements
of the array and the number of elements allocated for the array and
reallocating memory if needed.
Acked-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new flag that indicates that this control is a dynamically sized
array. Also document this flag.
Currently dynamically sized arrays are limited to one dimensional arrays,
but that might change in the future if there is a need for it.
The initial use-case of dynamic arrays are stateless codecs. A frame
can be divided in many slices, so you want to provide an array containing
slice information for each slice. Typically the number of slices is small,
but the standard allow for hundreds or thousands of slices. Dynamic arrays
are a good solution since sizing the array for the worst case would waste
substantial amounts of memory.
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
UBWC configuration parameters would vary across video hardware
generations. At the same time, driver is expected to configure these
parameters, without relying on video firmware to use the default
configurations.
Setting the configuration parameters for sc7280.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix a smatch error:
drivers/media/platform/qcom/venus/helpers.c: drivers/media/platform/qcom/venus/helpers.c:678 venus_helper_get_bufreq() error: we previously assumed 'req' could be null (see line 674)
After checking how venus_helper_get_bufreq() is called it is clear that
req is never NULL, so just drop the checks.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add documentation of device tree in YAML schema for the OV5693
CMOS image sensor from Omnivision
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for ACPI-based platforms that specify the clock frequency by
using the "clock-frequency" property instead of specifying a clock
provider reference
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename clk pdata pointer into xvclk (system clock input).
Same for clk_rate into xvclk_rate. This is more explicit
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead of hardcode OV5693_NUM_SUPPLIES in a define is better use
ARRAY_SIZE function to count the number of supplies from
ov5693_supply_names array
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Where iteration over links for an entity is clearly assuming that
all of those links are data links, use the new iterator to guarantee
that assumption is met.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Iterating over the links for an entity is a somewhat common need
through the media subsystem, but generally the assumption is that
they will all be data links. To meet that assumption add a new macro
that iterates through an entity's links and skips non-data links.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Implement V4L2_SEL_TGT_CROP_BOUNDS query in get_selection subdev op
for this sensor. This is required e.g. to bind it to STM32MP15x DCMI.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
stm32-dcmi calls its source subdev with v4l2_subdev_call() using a
v4l2_subdev_state constructed on stack. This means that init_cfg is
never called for that state, and a source subdev that depends on the
init_cfg call may break.
A new macro has been added for this particular purpose, which properly
initializes the state, so let's use v4l2_subdev_call_state_try() here.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a helper macro for the situations where a non-MC driver needs to
call a state-operation (operation which takes a subdev state as a
parameter) in try-context in another subdev.
The macro allocates a new subdev state for the called subdev and frees
the state afterwards.
An example use case is a media platform driver testing if a
v4l2_subdev_format would be accepted by a source subdev.
This should not be used in MC drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
VIDEO_V4L2 no longer exists, instead use VIDEO_DEV. Without this change
this driver cannot be selected.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The VIDEO_V4L2_SUBDEV_API Kconfig symbol is mostly selected
automatically, with a a handful of drivers still using it as a
dependency. Fix them to use selection, and drop the symbol title text to
not expose it for manual selection.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add the missing gpiod_set_value_cansleep() and clk_disable_unprepare()
before return from ov7251_set_power_on() in the error handling case.
Fixes: 9e1d3012cc ("media: i2c: Remove .s_power() from ov7251")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
