On powerpc 8xx huge_ptep_get() will need to know whether the given ptep is
a PTE entry or a PMD entry. This cannot be known with the PMD entry
itself because there is no easy way to know it from the content of the
entry.
So huge_ptep_get() will need to know either the size of the page or get
the pmd.
In order to be consistent with huge_ptep_get_and_clear(), give mm and
address to huge_ptep_get().
Link: https://lkml.kernel.org/r/cc00c70dd384298796a4e1b25d6c4eb306d3af85.1719928057.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The variable is supposed to be set via later migrate_pages() call.
However, the function does not do that when CONFIG_MIGRATION is unset.
Initialize the variable to zero.
Link: https://lkml.kernel.org/r/20240701165332.47495-1-sj@kernel.org
Fixes: 5311c0a2eee3 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406251102.GE07hqfQ-lkp@intel.com/
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON keeps the number of regions under max_nr_regions by skipping regions
split operations when doing so can make the number higher than the limit.
It works well for preventing violation of the limit. But, if somehow the
violation happens, it cannot recovery well depending on the situation. In
detail, if the real number of regions having different access pattern is
higher than the limit, the mechanism cannot reduce the number below the
limit. In such a case, the system could suffer from high monitoring
overhead of DAMON.
The violation can actually happen. For an example, the user could reduce
max_nr_regions while DAMON is running, to be lower than the current number
of regions. Fix the problem by repeating the merge operations with
increasing aggressiveness in kdamond_merge_regions() for the case, until
the limit is met.
[sj@kernel.org: increase regions merge aggressiveness while respecting min_nr_regions]
Link: https://lkml.kernel.org/r/20240626164753.46270-1-sj@kernel.org
[sj@kernel.org: ensure max threshold attempt for max_nr_regions violation]
Link: https://lkml.kernel.org/r/20240627163153.75969-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240624175814.89611-1-sj@kernel.org
Fixes: b9a6ac4e4e ("mm/damon: adaptively adjust regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT contains code for handling of online DAMON parameters
update edge cases. It is no more necessary since damon_commit_ctx() takes
care of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT manually manipulates the DAMON context struct for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM contains code for handling of online DAMON parameters update
edge cases. It is no more necessary since damon_commit_ctx() takes care
of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM manually manipulates the DAMON context struct for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The functions were for updating DAMON structs that may or may not be
partially populated. Hence it was not for only adding items, but also
removing unnecessary items and updating items in-place. A previous commit
has changed the functions to assume the structs are not partially
populated, and do only adding items. Make the names better explain the
behavior.
Link: https://lkml.kernel.org/r/20240618181809.82078-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon/sysfs-schemes.c contains code for handling of online DAMON
parameters update edge cases. The logics are no more necessary since
damon_commit_ctx() and damon_commit_quota_goals() takes care of the cases.
Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function was for updating DAMON structs that may or may not be
partially populated. Hence it was not for only adding items, but also
removing unnecessary items and updating items in-place. A previous commit
has changed the function to assume the structs are not partially
populated, and do only adding items. Make the function name better
explain the behavior.
Link: https://lkml.kernel.org/r/20240618181809.82078-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon/sysfs.c contains code for handling of online DAMON parameters update
edge cases. It is no more necessary since damon_commit_ctx() takes care
of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS manually manipulates the DAMOS quota structs for online quotal
goals parameter update. Since the struct contains not only input
parameters but also internal status and operation results, it is not that
simple. Now DAMON core layer provides a function for the usage, namely
damon_commit_quota_goals(). Replace the manual manipulation logic with
the function. The core layer function could have its own bugs, but this
change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS manually manipulates DAMON context structs for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement functions for supporting online DAMON context level parameters
update. The function receives two DAMON context structs. One is the
struct that currently being used by a kdamond and therefore to be updated.
The other one contains the parameters to be applied to the first one.
The function applies the new parameters to the destination struct while
keeping/updating the internal status and operation results. The function
should be called from DAMON context-update-safe place, like DAMON
callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: introduce DAMON parameters online commit function".
DAMON context struct (damon_ctx) contains user requests (parameters),
internal status, and operation results. For flexible usages, DAMON API
users are encouraged to manually manipulate the struct. That works well
for simple use cases. However, it has turned out that it is not that
simple at least for online parameters udpate. It is easy to forget
properly maintaining internal status and operation results. Also, such
manual manipulation for online tuning is implemented multiple times on
DAMON API users including DAMON sysfs interface, DAMON_RECLAIM and
DAMON_LRU_SORT. As a result, we have multiple sources of bugs for same
problem. Actually we found and fixed a few bugs from online parameter
updating of DAMON API users.
Implement a function for online DAMON parameters update in core layer, and
replace DAMON API users' manual manipulation code for the use case. The
core layer function could still have bugs, but this change reduces the
source of bugs for the problem to one place.
This patch (of 12):
Implement functions for supporting online DAMOS quota goals parameters
update. The function receives two DAMOS quota structs. One is the struct
that currently being used by a kdamond and therefore to be updated. The
other one contains the parameters to be applied to the first one. The
function applies the new parameters to the destination struct while
keeping/updating the internal status. The function should be called from
parameters-update safe place, like DAMON callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240618181809.82078-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces DAMOS_MIGRATE_HOT action, which is similar to
DAMOS_MIGRATE_COLD, but proritizes hot pages.
It migrates pages inside the given region to the 'target_nid' NUMA node
in the sysfs.
Here is one of the example usage of this 'migrate_hot' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_hot
$ echo 0 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 2 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Link: https://lkml.kernel.org/r/20240614030010.751-7-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces DAMOS_MIGRATE_COLD action, which is similar to
DAMOS_PAGEOUT, but migrate folios to the given 'target_nid' in the sysfs
instead of swapping them out.
The 'target_nid' sysfs knob informs the migration target node ID.
Here is one of the example usage of this 'migrate_cold' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_cold
$ echo 2 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 0 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Since there are some common routines with pageout, many functions have
similar logics between pageout and migrate cold.
damon_pa_migrate_folio_list() is a minimized version of
shrink_folio_list().
Link: https://lkml.kernel.org/r/20240614030010.751-6-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds target_nid under
/sys/kernel/mm/damon/admin/kdamonds/<N>/contexts/<N>/schemes/<N>/
The 'target_nid' can be used as the destination node for DAMOS actions
such as DAMOS_MIGRATE_{HOT,COLD} in the follow up patches.
[sj@kernel.org: document target_nid file]
Link: https://lkml.kernel.org/r/20240618213630.84846-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20240614030010.751-4-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_wmark_metric_value's return value is 'unsigned long', so returning
-EINVAL as 'unsigned long' may turn out to be very different from the
expected one (using 2's complement) and treat as usual matric's value.
So, fix that, checking if returned value is not 0.
Link: https://lkml.kernel.org/r/20240506180238.53842-1-sj@kernel.org
Fixes: ee801b7dd7 ("mm/damon/schemes: activate schemes based on a watermarks mechanism")
Signed-off-by: Alex Rusuf <yorha.op@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: misc fixes and improvements".
Add miscelleneous and non-urgent fixes and improvements for DAMON code,
selftests, and documents.
This patch (of 10):
damos_quota_init_priv() function should initialize all private fields of
struct damos_quota. However, it is not initializing ->esz_bp field. This
could result in use of uninitialized variable from
damon_feed_loop_next_input() function. There is no such issue at the
moment because every caller of the function is passing damos_quota object
that already having the field zero value. But we cannot guarantee the
future, and the function is not doing what it is promising. A bug is a
bug. This fix is for preventing possible future issues.
Link: https://lkml.kernel.org/r/20240503180318.72798-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240503180318.72798-2-sj@kernel.org
Fixes: 9294a037c0 ("mm/damon/core: implement goal-oriented feedback-driven quota auto-tuning")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All reclaim_pages() callers are setting 'ignore_references' parameter
'true'. In other words, the parameter is not really being used. Remove
the argument to make it simple.
Link: https://lkml.kernel.org/r/20240429224451.67081-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'pageout' DAMOS action implementation of 'paddr' DAMON operations set asks
reclaim_pages() to do page level access check if the user is not asking
DAMOS to do that on its own. Simplify the logic by making the check
always be done by 'paddr'.
Link: https://lkml.kernel.org/r/20240429224451.67081-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/paddr: simplify page level access re-check for
pageout.
The 'pageout' DAMOS action implementation of 'paddr' asks reclaim_pages()
to do page level access check again. But the user can ask 'paddr' to do
the page level access check on its own, using DAMOS filter of 'young page'
type. Meanwhile, 'paddr' is the only user of reclaim_pages() that asks
the page level access check.
Make 'paddr' does the page level access check on its own always, and
simplify reclaim_pages() by removing the page level access check request
handling logic. As a result of the change for reclaim_pages(),
reclaim_folio_list(), which is called by reclaim_pages(), also no more
need to do the page level access check. Simplify the function, too.
This patch (of 4):
'pageout' DAMOS action implementation of 'paddr' asks reclaim_pages() to
do the page level access check. User could ask DAMOS to do the page level
access check on its own using 'young page' type DAMOS filter. In the
case, pageout DAMOS action unnecessarily asks reclaim_pages() to do the
check again. Ask the page level access check only if the scheme is not
having the filter.
Link: https://lkml.kernel.org/r/20240429224451.67081-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240429224451.67081-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS filter of type YOUNG is defined, but not yet implemented by any
DAMON operations set. Add the implementation on 'paddr', the DAMON
operations set for the physical address space.
Link: https://lkml.kernel.org/r/20240426195247.100306-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Define yet another DAMOS filter type, YOUNG. Like anon and memcg, the
type of filter will be applied to each page in the memory region, and see
if the page is accessed since the last check. Based on the 'matching'
parameter, the page is filtered out or in.
Note that this commit is adding only the type definition. The
implementation should be made by DAMON operations sets. A commit for the
implementation on 'paddr' DAMON operations set will follow.
Link: https://lkml.kernel.org/r/20240426195247.100306-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_pa_mkold() receives physical address, get the folio covering the
address, and makes the folio as old. A following commit will reuse the
internal logic for marking a given folio as old. To avoid duplication of
the code, split the internal logic. Also, change the rmap walker
function's name from __damon_pa_mkold() to damon_folio_mkold_one(),
following the change of the caller's name and the naming rule that more
commonly used by other rmap walkers.
Link: https://lkml.kernel.org/r/20240426195247.100306-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: add a DAMOS filter type for page granularity
access recheck".
DAMON provides its best-effort accuracy-overhead tradeoff under the
user-defined ranges of acceptable level of the monitoring accuracy and
overhead. A recent discussion for tiered memory management support from
DAMON[1] concluded that finding memory regions of specific access pattern
with low overhead despite of low accuracy via DAMON first, and then double
checking the access of the region again in a finer (e.g., page)
granularity could be a useful strategy for some DAMOS schemes.
Add a new type of DAMOS filter, namely 'young' for such a case. It checks
each page of DAMOS target region is accessed since the last check, and
filters it out or in if 'matching' parameter is 'true' or 'false',
respectively.
Because this is a filter type that applied in page granularity, the
support depends on DAMON operations set, similar to 'anon' and 'memcg'
DAMOS filter types. Implement the support on the DAMON operations set for
the physical address space, 'paddr', since one of the expected usages[1]
is based on the physical address space.
[1] https://lore.kernel.org/r/20240227235121.153277-1-sj@kernel.org
This patch (of 7):
damon_pa_young() receives physical address, get the folio covering the
address, and show if the folio is accessed since the last check. A
following commit will reuse the internal logic for checking access to a
given folio. To avoid duplication of the code, split the internal logic.
Also, change the rmap walker function's name from __damon_pa_young() to
damon_folio_young_one(), following the change of the caller's name and the
naming rule that more commonly used by other rmap walkers.
Link: https://lkml.kernel.org/r/20240426195247.100306-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240426195247.100306-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While doing MADV_PAGEOUT, the current code will clear PTE young so that
vmscan won't read young flags to allow the reclamation of madvised folios
to go ahead. It seems we can do it by directly ignoring references, thus
we can remove tlb flush in madvise and rmap overhead in vmscan.
Regarding the side effect, in the original code, if a parallel thread runs
side by side to access the madvised memory with the thread doing madvise,
folios will get a chance to be re-activated by vmscan (though the time gap
is actually quite small since checking PTEs is done immediately after
clearing PTEs young). But with this patch, they will still be reclaimed.
But this behaviour doing PAGEOUT and doing access at the same time is
quite silly like DoS. So probably, we don't need to care. Or ignoring
the new access during the quite small time gap is even better.
For DAMON's DAMOS_PAGEOUT based on physical address region, we still keep
its behaviour as is since a physical address might be mapped by multiple
processes. MADV_PAGEOUT based on virtual address is actually much more
aggressive on reclamation. To untouch paddr's DAMOS_PAGEOUT, we simply
pass ignore_references as false in reclaim_pages().
A microbench as below has shown 6% decrement on the latency of
MADV_PAGEOUT,
#define PGSIZE 4096
main()
{
int i;
#define SIZE 512*1024*1024
volatile long *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
for (i = 0; i < SIZE/sizeof(long); i += PGSIZE / sizeof(long))
p[i] = 0x11;
madvise(p, SIZE, MADV_PAGEOUT);
}
w/o patch w/ patch
root@10:~# time ./a.out root@10:~# time ./a.out
real 0m49.634s real 0m46.334s
user 0m0.637s user 0m0.648s
sys 0m47.434s sys 0m44.265s
Link: https://lkml.kernel.org/r/20240226005739.24350-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Support the PSI-driven quota self-tuning from DAMON_RECLAIM by introducing
yet another parameter, 'quota_mem_pressure_us'. Users can set the desired
amount of memory pressure stall time per each quota reset interval using
the parameter. Then DAMON_RECLAIM monitor the memory pressure stall time,
specifically system-wide memory 'some' PSI value that increased during the
given time interval, and self-tune the quota using the DAMOS core logic.
Link: https://lkml.kernel.org/r/20240219194431.159606-20-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS supports user-feedback driven quota auto-tuning, but only DAMON
sysfs interface is using it. Add support of the feature on DAMON_RECLAIM
by adding one more input parameter, namely 'quota_autotune_feedback', for
providing the user feedback to DAMON_RECLAIM. It assumes the target value
of the feedback is 10,000.
Link: https://lkml.kernel.org/r/20240219194431.159606-19-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend DAMON sysfs interface to support the PSI-based quota auto-tuning by
adding a new file, 'target_metric' under the quota goal directory. Old
users don't get any behavioral changes since the default value of the
metric is 'user input'.
Link: https://lkml.kernel.org/r/20240219194431.159606-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend DAMOS quota goal metric with system wide memory pressure stall
time. Specifically, the system level 'some' PSI for memory is used. The
target value can be set in microseconds. DAMOS measures the increased
amount of the PSI metric in last quota_reset_interval and use the ratio of
it versus the user-specified target PSI value as the score for the
auto-tuning feedback loop.
Link: https://lkml.kernel.org/r/20240219194431.159606-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota auto-tuning asks users to assess the current tuned quota and
provide the feedback in a manual and repeated way. It allows users
generate the feedback from a source that the kernel cannot access, and
writing a script or a function for doing the manual and repeated feeding
is not a big deal. However, additional works are additional works, and it
could be more efficient if DAMOS could do the fetch itself, especially in
case of DAMON sysfs interface use case, since it can avoid the context
switches between the user-space and the kernel-space, though the overhead
would be only trivial in most cases. Also in many cases, feedbacks could
be made from kernel-accessible sources, such as PSI, CPU usage, etc. Make
the quota goal to support multiple types of metrics including such ones.
Link: https://lkml.kernel.org/r/20240219194431.159606-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota auto-tuning feature let users to set the goal by providing a
function for getting the current score of the tuned quota. It allows
flexible goal setup, but only simple user-set quota is currently being
used. As a result, the only user of the DAMOS quota auto-tuning is using
a silly void pointer casting based score value passing function. Simplify
the interface and the user code by letting user directly set the target
and the current value.
Link: https://lkml.kernel.org/r/20240219194431.159606-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota auto-tuning feature supports static signle goal and dynamic
multiple goals via DAMON kernel API, specifically via ->goal and ->goals
fields of damos_quota struct, respectively. All in-tree DAMOS kernel API
users are using only the dynamic multiple goals now. Remove the unsued
static single goal interface.
Link: https://lkml.kernel.org/r/20240219194431.159606-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface implements multiple quota auto-tuning goals on its
level since the DAMOS core logic was supporting only single goal. Now the
core logic supports multiple goals on its level. Update DAMON sysfs
interface to reuse the core logic and drop unnecessary duplicated multiple
goals implementation.
Link: https://lkml.kernel.org/r/20240219194431.159606-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The feedback-driven DAMOS quota auto-tuning feature allows only single
goal to the DAMON kernel API users. The API users could implement
multiple goals for the end-users on their level, and that's what DAMON
sysfs interface is doing. More DAMON kernel API users such as
DAMON_RECLAIM would need to do similar work. To reduce unnecessary future
duplciated efforts, support multiple goals from DAMOS core layer. To make
the support in minimum non-destructive change, keep the old single goal
setup interface, and add multiple goals setup. The single goal will
treated as one of the multiple goals, so old API users are not required to
make any change.
Link: https://lkml.kernel.org/r/20240219194431.159606-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'struct damos_quota' is not small now. Split out fields for quota goal to
a separate struct for easier reading.
Link: https://lkml.kernel.org/r/20240219194431.159606-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement yet another kdamond 'state' file input command, namely
'update_schemes_effective_quotas'. If it is written, the
'effective_bytes' files of the kdamond will be updated to provide the
current effective size quota of each scheme in bytes.
Link: https://lkml.kernel.org/r/20240219194431.159606-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface allows users to set two types of quotas, namely time
quota and size quota. DAMOS converts time quota to a size quota and use
smaller one among the resulting two size quotas. The resulting effective
size quota can be helpful for debugging and analysis, but not exposed to
the user. The recently added feedback-driven quota auto-tuning is making
it even more mysterious.
Implement a DAMON sysfs interface read-only empty file, namely
'effective_bytes', under the quota goal DAMON sysfs directory. It will be
extended to expose the effective quota to the end user.
Link: https://lkml.kernel.org/r/20240219194431.159606-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: let DAMOS feeds and tame/auto-tune itself".
The Aim-oriented Feedback-driven DAMOS Aggressiveness Auto-tuning
patchset[1] which has merged since commit 9294a037c0 ("mm/damon/core:
implement goal-oriented feedback-driven quota auto-tuning") made the
mechanism and the policy separated. That is, users can set a part of
DAMOS control policies without a deep understanding of the mechanism but
just their demands such as SLA.
However, users are still required to do some additional work of manually
collecting their target metric and feeding it to DAMOS. In the case of
end-users who use DAMON sysfs interface, the context switches between
user-space and kernel-space could also make it inefficient. The overhead
is supposed to be only trivial in common cases, though. Meanwhile, in
simple use cases, the target metric could be common system metrics that
the kernel can efficiently self-retrieve, such as memory pressure stall
time (PSI).
Extend DAMOS quota auto-tuning to support multiple types of metrics
including the DAMOS self-retrievable ones, and add support for memory
pressure stall time metric. Different types of metrics can be supported
in future. The auto-tuning capability is currently supported for only
users of DAMOS kernel API and DAMON sysfs interface. Extend the support
to DAMON_RECLAIM.
Patches Sequence
================
First five patches are for helping debugging and fine-tuning existing
quota control features. The first one (patch 1) exposes the effective
quota that is made with given user inputs to DAMOS kernel API users and
kernel-doc documents. Following four patches implement (patches 1, 2 and
3) and document (patches 4 and 5) a new DAMON sysfs file that exposes the
value.
Following six patches cleanup and simplify the existing DAMOS quota
auto-tuning code by improving layout of comments and data structures
(patches 6 and 7), supporting common use cases, namely multiple goals
(patches 8, 9 and 10), and simplifying the interface (patch 11).
Then six patches for the main purpose of this patchset follow. The first
three changes extend the core logic for various target metrics (patch 12),
implement memory pressure stall time-based target metric support (patch
13), and update DAMON sysfs interface to support the new target metric
(patch 14). Then, documentation updates for the features on design (patch
15), ABI (patch 16), and usage (patch 17) follow.
Last three patches add auto-tuning support on DAMON_RECLAIM. The patches
implement DAMON_RECLAIM parameters for user-feedback driven quota
auto-tuning (patch 18), memory pressure stall time-driven quota
self-tuning (patch 19), and finally update the DAMON_RECLAIM usage
document for the new parameters (patch 20).
[1] https://lore.kernel.org/all/20231130023652.50284-1-sj@kernel.org/
This patch (of 20):
DAMOS allow users to specify the quota as they want in multiple ways
including time quota, size quota, and feedback-based auto-tuning. DAMOS
makes one effective quota out of the inputs and use it at the end.
Knowing the current effective quota helps understanding DAMOS' internal
mechanism and fine-tuning quotas. DAMON kernel API users can get the
information from ->esz field of damos_quota struct, but the field is
marked as private purpose, and not kernel-doc documented. Make it public
and document.
Link: https://lkml.kernel.org/r/20240219194431.159606-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240219194431.159606-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface need to access kdamond-touching data for some of
kdamond user commands. It uses ->after_aggregation() kdamond callback to
safely access the data in the case. It had to use the aggregation
interval callback because that was the only callback that users can access
complete monitoring results.
Since patch series "mm/damon: provide pseudo-moving sum based access
rate", which starts from commit 78fbfb155d ("mm/damon/core: define and
use a dedicated function for region access rate update"), DAMON provides
good-to-use quality moitoring results for every sampling interval. It
aims to help users who need to quickly retrieve the monitoring results.
When the aggregation interval is set too long and therefore waiting for
the aggregation interval can degrade user experience, or when the access
pattern is expected to be significantly changed[1] could be such cases.
However, because DAMON sysfs interface is still handling the commands per
aggregation interval, the end user cannot get the benefit. Update DAMON
sysfs interface to handle kdamond commands for every sampling interval if
applicable. Specifically, all kdamond data accessing commands except
'commit' command are applicable.
[1] https://lore.kernel.org/r/20240129121316.GA9706@cuiyangpei
Link: https://lkml.kernel.org/r/20240206025158.203097-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: xiongping1 <xiongping1@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kernel builders could silently enable CONFIG_DAMON_DBGFS_DEPRECATED.
Users who manually check the files under the DAMON debugfs directory could
notice the deprecation owing to the 'DEPRECATED' DAMON debugfs file, but
there could be users who doesn't manually check the files.
Make the deprecation cannot be ignored in the case by renaming
'monitor_on' file, which is essential for real use of DAMON on runtime, to
'monitor_on_DEPRECATED'. Still users who control DAMON via only
user-space tool could ignore the deprecation, but that's what the tool
developers should take care of. DAMON user-space tool, damo, has also
made a change[1] for the purpose.
[1] commit 935dae76f2aee ("_damon_args: Rename --damon_interface to
--damon_interface_DEPRECATED") of https://github.com/awslabs/damo
Link: https://lkml.kernel.org/r/20240130013549.89538-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON debugfs interface deprecation message is written twice, once for the
warning, and again for DEPRECATED file's read output. De-duplicate those
by defining the message as a macro and reuse.
[akpm@linux-foundation.org: s/comnst/const/]
Link: https://lkml.kernel.org/r/20240130013549.89538-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a read-only file for DAMON debugfs interface deprecation notice,
to let users who manually read/write the DAMON debugfs files from their
shell command line easily notice the fact.
[arnd@arndb.de: fix bogus string length]
Link: https://lkml.kernel.org/r/20240202124339.892862-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240130013549.89538-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON debugfs interface is deprecated. The fact has documented by commit
5445fcbc4c ("Docs/admin-guide/mm/damon/usage: add DAMON debugfs
interface deprecation notice"). Commit 620932cd28 ("mm/damon/dbgfs:
print DAMON debugfs interface deprecation message") further started
printing a warning message when users still use it. Many people don't
read documentation or kernel log, though.
Make the deprecation harder to be ignored using the approach of commit
eb07c4f39c ("mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED").
'make oldconfig' with 'CONFIG_DAMON_DBGFS=y' will get a new prompt with
the explicit deprecation notice on the name. 'make olddefconfig' with
'CONFIG_DAMON_DBGFS=y' will result in not building DAMON debugfs
interface. If there is a real user of DAMON debugfs interface, they will
complain the change to the builder.
Link: https://lkml.kernel.org/r/20240130013549.89538-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For online parameters change, DAMON_LRU_SORT creates new schemes based on
latest values of the parameters and replaces the old schemes with the new
one. When creating it, the internal status of the quotas of the old
schemes is not preserved. As a result, charging of the quota starts from
zero after the online tuning. The data that collected to estimate the
throughput of the scheme's action is also reset, and therefore the
estimation should start from the scratch again. Because the throughput
estimation is being used to convert the time quota to the effective size
quota, this could result in temporal time quota inaccuracy. It would be
recovered over time, though. In short, the quota accuracy could be
temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for
the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-3-sj@kernel.org
Fixes: 40e983cca9 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: fix quota status loss due to online tunings".
DAMON_RECLAIM and DAMON_LRU_SORT is not preserving internal quota status
when applying new user parameters, and hence could cause temporal quota
accuracy degradation. Fix it by preserving the status.
This patch (of 2):
For online parameters change, DAMON_RECLAIM creates new scheme based on
latest values of the parameters and replaces the old scheme with the new
one. When creating it, the internal status of the quota of the old
scheme is not preserved. As a result, charging of the quota starts from
zero after the online tuning. The data that collected to estimate the
throughput of the scheme's action is also reset, and therefore the
estimation should start from the scratch again. Because the throughput
estimation is being used to convert the time quota to the effective size
quota, this could result in temporal time quota inaccuracy. It would be
recovered over time, though. In short, the quota accuracy could be
temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for
the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240216194025.9207-2-sj@kernel.org
Fixes: e035c280f6 ("mm/damon/reclaim: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'commit_schemes_quota_goals' command handler,
damos_sysfs_set_quota_scores() assumes the number of schemes sysfs
directory will be same to the number of schemes of the DAMON context. The
assumption is wrong since users can remove schemes sysfs directories while
DAMON is running. In the case, illegal memory accesses can happen. Fix
it by checking the case.
Link: https://lkml.kernel.org/r/20240213023633.124928-1-sj@kernel.org
Fixes: d91beaa505 ("mm/damon/sysfs-schemes: implement a command for scheme quota goals only commit")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
