SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason A. Donenfeld says:
====================
wireguard patches for 5.18-rc6
In working on some other problems, I wound up leaning on the WireGuard
CI more than usual and uncovered a few small issues with reliability.
These are fairly low key changes, since they don't impact kernel code
itself.
One change does stick out in particular, though, which is the "make
routing loop test non-fatal" commit. I'm not thrilled about doing this,
but currently [1] remains unsolved, and I'm still working on a real
solution to that (hopefully for 5.19 or 5.20 if I can come up with a
good idea...), so for now that test just prints a big red warning
instead.
[1] https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
====================
Link: https://lore.kernel.org/r/20220504202920.72908-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.
Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FPU usage related to task FPU management is either protected by
disabling interrupts (switch_to, return to user) or via fpregs_lock() which
is a wrapper around local_bh_disable(). When kernel code wants to use the
FPU then it has to check whether it is possible by calling irq_fpu_usable().
But the condition in irq_fpu_usable() is wrong. It allows FPU to be used
when:
!in_interrupt() || interrupted_user_mode() || interrupted_kernel_fpu_idle()
The latter is checking whether some other context already uses FPU in the
kernel, but if that's not the case then it allows FPU to be used
unconditionally even if the calling context interrupted a fpregs_lock()
critical region. If that happens then the FPU state of the interrupted
context becomes corrupted.
Allow in kernel FPU usage only when no other context has in kernel FPU
usage and either the calling context is not hard interrupt context or the
hard interrupt did not interrupt a local bottomhalf disabled region.
It's hard to find a proper Fixes tag as the condition was broken in one way
or the other for a very long time and the eager/lazy FPU changes caused a
lot of churn. Picked something remotely connected from the history.
This survived undetected for quite some time as FPU usage in interrupt
context is rare, but the recent changes to the random code unearthed it at
least on a kernel which had FPU debugging enabled. There is probably a
higher rate of silent corruption as not all issues can be detected by the
FPU debugging code. This will be addressed in a subsequent change.
Fixes: 5d2bd7009f ("x86, fpu: decouple non-lazy/eager fpu restore from xsave")
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220501193102.588689270@linutronix.de
rxe_mcast.c currently uses _irqsave spinlocks for rxe->mcg_lock while
rxe_recv.c uses _bh spinlocks for the same lock.
As there is no case where the mcg_lock can be taken from an IRQ, change
these all to bh locks so we don't have confusing mismatched lock types on
the same spinlock.
Fixes: 6090a0c4c7 ("RDMA/rxe: Cleanup rxe_mcast.c")
Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These routines were not intended to be called under a spinlock and will
throw debugging warnings:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 13 PID: 3107 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x2f/0x50
CPU: 13 PID: 3107 Comm: python3 Tainted: G E 5.18.0-rc1+ #7
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:warn_bogus_irq_restore+0x2f/0x50
Call Trace:
<TASK>
_raw_spin_unlock_irqrestore+0x75/0x80
rxe_attach_mcast+0x304/0x480 [rdma_rxe]
ib_attach_mcast+0x88/0xa0 [ib_core]
ib_uverbs_attach_mcast+0x186/0x1e0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xcd/0x140 [ib_uverbs]
ib_uverbs_cmd_verbs+0xdb0/0xea0 [ib_uverbs]
ib_uverbs_ioctl+0xd2/0x160 [ib_uverbs]
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Move them out of the spinlock, it is OK if there is some races setting up
the MC reception at the ethernet layer with rbtree lookups.
Fixes: 6090a0c4c7 ("RDMA/rxe: Cleanup rxe_mcast.c")
Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The calling of siw_cm_upcall and detaching new_cep with its listen_cep
should be atomistic semantics. Otherwise siw_reject may be called in a
temporary state, e,g, siw_cm_upcall is called but the new_cep->listen_cep
has not being cleared.
This fixes a WARN:
WARNING: CPU: 7 PID: 201 at drivers/infiniband/sw/siw/siw_cm.c:255 siw_cep_put+0x125/0x130 [siw]
CPU: 2 PID: 201 Comm: kworker/u16:22 Kdump: loaded Tainted: G E 5.17.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
RIP: 0010:siw_cep_put+0x125/0x130 [siw]
Call Trace:
<TASK>
siw_reject+0xac/0x180 [siw]
iw_cm_reject+0x68/0xc0 [iw_cm]
cm_work_handler+0x59d/0xe20 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x50/0x3a0
? rescuer_thread+0x390/0x390
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/d528d83466c44687f3872eadcb8c184528b2e2d4.1650526554.git.chengyou@linux.alibaba.com
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We no longer use these since 111659c2a5 (and they never worked
anyway); drop them from the example to avoid confusion.
Fixes: 111659c2a5 ("arm64: dts: apple: t8103: Remove PCIe max-link-speed properties")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502091308.28233-1-marcan@marcan.st
Another round of removing redundant minItems/maxItems when 'items' list is
specified. This time it is in if/then schemas as the meta-schema was
failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Link: https://lore.kernel.org/r/20220503162738.3827041-1-robh@kernel.org
A few platforms, at91 and tegra, use drive-push-pull and
drive-open-drain with a 0 or 1 value. There's not really a need for values
as '1' should be equivalent to no value (it wasn't treated that way) and
drive-push-pull disabled is equivalent to drive-open-drain. So dropping the
value can't be done without breaking existing OSs. As we don't want new
cases, mark the case with values as deprecated.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220429194610.2741437-1-robh@kernel.org
Including:
- Fix for a regression in IOMMU core code which could cause NULL-ptr
dereferences
- Arm SMMU fixes for 5.18
- Fix off-by-one in SMMUv3 SVA TLB invalidation
- Disable large mappings to workaround nvidia erratum
- Intel VT-d fixes
- Handle PCI stop marker messages in IOMMU driver to meet the
requirement of I/O page fault handling framework.
- Calculate a feasible mask for non-aligned page-selective IOTLB
invalidation.
- Two fixes for Apple DART IOMMU driver
- Fix potential NULL-ptr dereference
- Set module owner
-----BEGIN PGP SIGNATURE-----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=jB96
-----END PGP SIGNATURE-----
Merge tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"IOMMU core:
- Fix for a regression which could cause NULL-ptr dereferences
Arm SMMU:
- Fix off-by-one in SMMUv3 SVA TLB invalidation
- Disable large mappings to workaround nvidia erratum
Intel VT-d:
- Handle PCI stop marker messages in IOMMU driver to meet the
requirement of I/O page fault handling framework.
- Calculate a feasible mask for non-aligned page-selective IOTLB
invalidation.
Apple DART IOMMU:
- Fix potential NULL-ptr dereference
- Set module owner"
* tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Make sysfs robust for non-API groups
iommu/dart: Add missing module owner to ops structure
iommu/dart: check return value after calling platform_get_resource()
iommu/vt-d: Drop stop marker messages
iommu/vt-d: Calculate mask for non-aligned flushes
iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu
iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
This has been in for-next for a bit (longer than the times would
indicate, I had to rebase to add some text to the headers) and these are
fixes that need to go in.
-----BEGIN PGP SIGNATURE-----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=f3CV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Fix some issues that were reported.
This has been in for-next for a bit (longer than the times would
indicate, I had to rebase to add some text to the headers) and these
are fixes that need to go in"
* tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi:
ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi()
ipmi: When handling send message responses, don't process the message
A faulty receiver might report an erroneous channel count. We
should guard against reading beyond AUDIO_CHANNELS_COUNT as
that would overflow the dpcd_pattern_period array.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
While technically Xen dom0 is a virtual machine too, it does have
access to most of the hardware so it doesn't need to be considered a
"passthrough". Commit b818a5d374 ("drm/amdgpu/gmc: use PCI BARs for
APUs in passthrough") changed how FB is accessed based on passthrough
mode. This breaks amdgpu in Xen dom0 with message like this:
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
While the reason for this failure is unclear, the passthrough mode is
not really necessary in Xen dom0 anyway. So, to unbreak booting affected
kernels, disable passthrough mode in this case.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1985
Fixes: b818a5d374 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Groups created by VFIO backends outside the core IOMMU API should never
be passed directly into the API itself, however they still expose their
standard sysfs attributes, so we can still stumble across them that way.
Take care to consider those cases before jumping into our normal
assumptions of a fully-initialised core API group.
Fixes: 3f6634d997 ("iommu: Use right way to retrieve iommu_ops")
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As reported by Alan, the CFI (Call Frame Information) in the VDSO time
routines is incorrect since commit ce7d8056e3 ("powerpc/vdso: Prepare
for switching VDSO to generic C implementation.").
DWARF has a concept called the CFA (Canonical Frame Address), which on
powerpc is calculated as an offset from the stack pointer (r1). That
means when the stack pointer is changed there must be a corresponding
CFI directive to update the calculation of the CFA.
The current code is missing those directives for the changes to r1,
which prevents gdb from being able to generate a backtrace from inside
VDSO functions, eg:
Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime ()
(gdb) bt
#0 0x00007ffff7f804dc in __kernel_clock_gettime ()
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
#2 0x00007fffffffd960 in ?? ()
#3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
Backtrace stopped: frame did not save the PC
Alan helpfully describes some rules for correctly maintaining the CFI information:
1) Every adjustment to the current frame address reg (ie. r1) must be
described, and exactly at the instruction where r1 changes. Why?
Because stack unwinding might want to access previous frames.
2) If a function changes LR or any non-volatile register, the save
location for those regs must be given. The CFI can be at any
instruction after the saves up to the point that the reg is
changed.
(Exception: LR save should be described before a bl. not after)
3) If asychronous unwind info is needed then restores of LR and
non-volatile regs must also be described. The CFI can be at any
instruction after the reg is restored up to the point where the
save location is (potentially) trashed.
Fix the inability to backtrace by adding CFI directives describing the
changes to r1, ie. satisfying rule 1.
Also change the information for LR to point to the copy saved on the
stack, not the value in r0 that will be overwritten by the function
call.
Finally, add CFI directives describing the save/restore of r2.
With the fix gdb can correctly back trace and navigate up and down the stack:
Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime ()
(gdb) bt
#0 0x00007ffff7f804dc in __kernel_clock_gettime ()
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
#2 0x0000000100015b60 in gettime ()
#3 0x000000010000c8bc in print_long_format ()
#4 0x000000010000d180 in print_current_files ()
#5 0x00000001000054ac in main ()
(gdb) up
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
(gdb)
#2 0x0000000100015b60 in gettime ()
(gdb)
#3 0x000000010000c8bc in print_long_format ()
(gdb)
#4 0x000000010000d180 in print_current_files ()
(gdb)
#5 0x00000001000054ac in main ()
(gdb)
Initial frame selected; you cannot go up.
(gdb) down
#4 0x000000010000d180 in print_current_files ()
(gdb)
#3 0x000000010000c8bc in print_long_format ()
(gdb)
#2 0x0000000100015b60 in gettime ()
(gdb)
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
(gdb)
#0 0x00007ffff7f804dc in __kernel_clock_gettime ()
(gdb)
Fixes: ce7d8056e3 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20220502125010.1319370-1-mpe@ellerman.id.au
The user can change the QoS credits dynamically with the
management console interface which notifies OS with sysfs. After
returning from the OS interface successfully, the management
console updates the hypervisor. Since the VAS capabilities in
the hypervisor is not updated when the OS gets the update,
the kernel is using the old total credits value from the
hypervisor. Fix this issue by using the new QoS credits
from the userspace instead of depending on VAS capabilities
from the hypervisor.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/76d156f8af1e03cc09369d68e0bfad0c40031bcc.camel@linux.ibm.com
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmJyJHcACgkQSD+KveBX
+j60dQf/UFKW7VzUfUyT4+pgMZHdCQLsEkf7lgHzFjcWD3XaiBr7him3RIFl0ZrI
0mD2AHA7YT6ePtub8Pjyqbfu4hC7rYWMDW6J2iqV7V05co/AVdWLFgxex1zEMhK8
nD2f4nFkgs5rOeSn6tOj0ttSlXQOPmPPh5FfIGy2oiGTeNWOYG5URw1crOoNe+HG
0Z4uAmQDXETFLgim+A8DDTrbjSY60EDT/qnpOhPISpE/EtiG8OCaPDtcsSEmF9re
0LebIKUvx4X9fsHPvxyC0TfKvYpxSHkbz+VAx//O8+aGmHKgco07/3aeWM5Z9D/7
ulbQJQTIwcsM3GwlAFygCjFWFqiLvQ==
=gXIJ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/g
it/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-05-03
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Newer variants of the MMC controller support a 34-bit physical address
space by using word addresses instead of byte addresses. However, the
code truncates the DMA descriptor address to 32 bits before applying the
shift. This breaks DMA for descriptors allocated above the 32-bit limit.
Fixes: 3536b82e58 ("mmc: sunxi: add support for A100 mmc controller")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220424231751.32053-1-samuel@sholland.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently MBSSID parameters in struct ieee80211_bss_conf
are not reset upon connection. This could be problematic
with some drivers in a scenario where the device first
connects to a non-transmit BSS and then connects to a
transmit BSS of a Multi BSS AP. The MBSSID parameters
which are set after connecting to a non-transmit BSS will
not be reset and the same parameters will be passed on to
the driver during the subsequent connection to a transmit
BSS of a Multi BSS AP.
For example, firmware running on the ath11k device uses the
Multi BSS data for tracking the beacon of a non-transmit BSS
and reports the driver when there is a beacon miss. If we do
not reset the MBSSID parameters during the subsequent
connection to a transmit BSS, then the driver would have
wrong MBSSID data and FW would be looking for an incorrect
BSSID in the MBSSID beacon of a Multi BSS AP and reports
beacon loss leading to an unstable connection.
Reset the MBSSID parameters upon every connection to solve this
problem.
Fixes: 78ac51f815 ("mac80211: support multi-bssid")
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Link: https://lore.kernel.org/r/20220428052744.27040-1-quic_mpubbise@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When retrieving the S1G channel number from IEs, we should retrieve
the operating channel instead of the primary channel. The S1G operation
element specifies the main channel of operation as the oper channel,
unlike for HT and HE which specify their main channel of operation as
the primary channel.
Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20220420041321.3788789-1-kieran.frewen@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Validate the S1G channel width input by user to ensure it matches
that of the requested channel
Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20220420041321.3788789-2-kieran.frewen@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the QoS ack policy was set to non explicit / psmp ack, frames are treated
as not being part of a BA session, which causes extra latency on reordering.
Fix this by only bypassing reordering for packets with no-ack policy
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220420105038.36443-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is required to make loading this as a module work.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 46d1fb072e ("iommu/dart: Add DART iommu driver")
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220502092238.30486-1-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IT6505 is using functions provided by the DRM_DP_HELPER driver.
In order to avoid having the bridge enabled but the helper disabled,
let's add a select in order to be sure that the DP helper functions are
always available.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com
The cited commits didn't use proper matching on inner TTC
as a result distribution of encapsulated packets wasn't symmetric
between the physical ports.
Fixes: 4c71ce50d2 ("net/mlx5: Support partial TTC rules")
Fixes: 8e25a2bc66 ("net/mlx5: Lag, add support to create TTC tables for LAG port selection")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Double clear of reset requested state can lead to NULL pointer as it
will try to delete the timer twice. This can happen for example on a
race between abort from FW and pci error or reset. Avoid such case using
test_and_clear_bit() to verify only one time reset requested state clear
flow. Similarly use test_and_set_bit() to verify only one time reset
requested state set flow.
Fixes: 7dd6df329d ("net/mlx5: Handle sync reset abort event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The sync reset flow can lead to the following deadlock when
poll_sync_reset() is called by timer softirq and waiting on
del_timer_sync() for the same timer. Fix that by moving the part of the
flow that waits for the timer to reset_reload_work.
It fixes the following kernel Trace:
RIP: 0010:del_timer_sync+0x32/0x40
...
Call Trace:
<IRQ>
mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core]
poll_sync_reset.cold+0x36/0x52 [mlx5_core]
call_timer_fn+0x32/0x130
__run_timers.part.0+0x180/0x280
? tick_sched_handle+0x33/0x60
? tick_sched_timer+0x3d/0x80
? ktime_get+0x3e/0xa0
run_timer_softirq+0x2a/0x50
__do_softirq+0xe1/0x2d6
? hrtimer_interrupt+0x136/0x220
irq_exit+0xae/0xb0
smp_apic_timer_interrupt+0x7b/0x140
apic_timer_interrupt+0xf/0x20
</IRQ>
Fixes: 3c5193a87b ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Setting dscp2prio during the driver reload can cause dcb ieee app list to
be not empty after the reload finish and as a result to a conflict between
the priority trust state reported by the app and the state in the device
register.
Reset the dcb ieee app list on initialization in case this is
conflicting with the register status.
Fixes: 2a5e7a1344 ("net/mlx5e: Add dcbnl dscp to priority support")
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
During TC action parsing, the can_offload callback is called
before calling the action's main parsing callback.
Later on, the can_offload callback is called again before handling
the action's post_parse callback if exists.
Since the main parsing callback might have changed and set parsing
params for the rule, following can_offload checks might fail because
some parsing params were already set.
Specifically, the ct action main parsing sets the ct param in the
parsing status structure and when the second can_offload for ct action
is called, before handling the ct post parsing, it will return an error
since it checks this ct param to indicate multiple ct actions which are
not supported.
Therefore, the can_offload call is removed from the post parsing
handling to prevent such cases.
This is allowed since the first can_offload call will ensure that the
action can be offloaded and the fact the code reached the post parsing
handling already means that the action can be offloaded.
Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT,
if that is the last reference to that tuple, the actual deletion of
the tuple can happen after the FT is already destroyed and freed.
Flush the used workqueue before destroying the ct FT.
Fixes: a217313152 ("net/mlx5e: CT: manage the lifetime of the ct entry object")
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When resolving the decap route device for a tunnel decap rule,
the result may be an OVS internal port device.
Prior to adding the support for internal port offload, such case
would result in using the uplink as the default decap route device
which allowed devices that can't support internal port offload
to offload this decap rule.
This behavior got broken by adding the internal port offload which
will fail in case the device can't support internal port offload.
To restore the old behavior, use the uplink device as the decap
route as before when internal port offload is not supported.
Fixes: b16eb3c81f ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
ct_clear action is translated to clearing reg_c metadata
which holds ct state and zone information using mod header
actions.
These actions are allocated during the actions parsing, as
part of the flow attributes main mod header action list.
If ct action exists in the rule, the flow's main mod header
is used only in the post action table rule, after the ct tables
which set the ct info in the reg_c as part of the ct actions.
Therefore, if the original rule has a ct_clear action followed
by a ct action, the ct action reg_c setting will be done first and
will be followed by the ct_clear resetting reg_c and overwriting
the ct info.
Fix this by moving the ct_clear mod header actions allocation from
the ct action parsing stage to the ct action post parsing stage where
it is already known if ct_clear is followed by a ct action.
In such case, we skip the mod header actions allocation for the ct
clear since the ct action will write to reg_c anyway after clearing it.
Fixes: 806401c20a ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Referenced change added check to skip updating fib when new fib instance
has same or lower priority. However, new fib instance can be an update on
same dst address as existing one even though the structure is another
instance that has different address. Ignoring events on such instances
causes multipath LAG state to not be correctly updated.
Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info
structure and don't skip events that have the same value of that fields.
Fixes: ad11c4f1d8 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Referenced change incorrectly sets single path fib_info even when LAG is
not active. Fix it by moving call to mlx5_lag_fib_set() into conditional
that verifies LAG state.
Fixes: ad11c4f1d8 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Recent commit that modified fib route event handler to handle events
according to their priority introduced use-after-free[0] in mp->mfi pointer
usage. The pointer now is not just cached in order to be compared to
following fib_info instances, but is also dereferenced to obtain
fib_priority. However, since mlx5 lag code doesn't hold the reference to
fin_info during whole mp->mfi lifetime, it could be used after fib_info
instance has already been freed be kernel infrastructure code.
Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*'
type and cache fib_info priority in dedicated integer. Group
fib_info-related data into dedicated 'fib' structure that will be further
extended by following patches in the series.
[0]:
[ 203.588029] ==================================================================
[ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138
[ 203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G B 5.17.0-rc7+ #6
[ 203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core]
[ 203.600053] Call Trace:
[ 203.600608] <TASK>
[ 203.601110] dump_stack_lvl+0x48/0x5e
[ 203.601860] print_address_description.constprop.0+0x1f/0x160
[ 203.602950] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.604073] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.605177] kasan_report.cold+0x83/0xdf
[ 203.605969] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.607102] mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.608199] ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core]
[ 203.609382] ? read_word_at_a_time+0xe/0x20
[ 203.610463] ? strscpy+0xa0/0x2a0
[ 203.611463] process_one_work+0x722/0x1270
[ 203.612344] worker_thread+0x540/0x11e0
[ 203.613136] ? rescuer_thread+0xd50/0xd50
[ 203.613949] kthread+0x26e/0x300
[ 203.614627] ? kthread_complete_and_exit+0x20/0x20
[ 203.615542] ret_from_fork+0x1f/0x30
[ 203.616273] </TASK>
[ 203.617174] Allocated by task 3746:
[ 203.617874] kasan_save_stack+0x1e/0x40
[ 203.618644] __kasan_kmalloc+0x81/0xa0
[ 203.619394] fib_create_info+0xb41/0x3c50
[ 203.620213] fib_table_insert+0x190/0x1ff0
[ 203.621020] fib_magic.isra.0+0x246/0x2e0
[ 203.621803] fib_add_ifaddr+0x19f/0x670
[ 203.622563] fib_inetaddr_event+0x13f/0x270
[ 203.623377] blocking_notifier_call_chain+0xd4/0x130
[ 203.624355] __inet_insert_ifa+0x641/0xb20
[ 203.625185] inet_rtm_newaddr+0xc3d/0x16a0
[ 203.626009] rtnetlink_rcv_msg+0x309/0x880
[ 203.626826] netlink_rcv_skb+0x11d/0x340
[ 203.627626] netlink_unicast+0x4cc/0x790
[ 203.628430] netlink_sendmsg+0x762/0xc00
[ 203.629230] sock_sendmsg+0xb2/0xe0
[ 203.629955] ____sys_sendmsg+0x58a/0x770
[ 203.630756] ___sys_sendmsg+0xd8/0x160
[ 203.631523] __sys_sendmsg+0xb7/0x140
[ 203.632294] do_syscall_64+0x35/0x80
[ 203.633045] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 203.634427] Freed by task 0:
[ 203.635063] kasan_save_stack+0x1e/0x40
[ 203.635844] kasan_set_track+0x21/0x30
[ 203.636618] kasan_set_free_info+0x20/0x30
[ 203.637450] __kasan_slab_free+0xfc/0x140
[ 203.638271] kfree+0x94/0x3b0
[ 203.638903] rcu_core+0x5e4/0x1990
[ 203.639640] __do_softirq+0x1ba/0x5d3
[ 203.640828] Last potentially related work creation:
[ 203.641785] kasan_save_stack+0x1e/0x40
[ 203.642571] __kasan_record_aux_stack+0x9f/0xb0
[ 203.643478] call_rcu+0x88/0x9c0
[ 203.644178] fib_release_info+0x539/0x750
[ 203.644997] fib_table_delete+0x659/0xb80
[ 203.645809] fib_magic.isra.0+0x1a3/0x2e0
[ 203.646617] fib_del_ifaddr+0x93f/0x1300
[ 203.647415] fib_inetaddr_event+0x9f/0x270
[ 203.648251] blocking_notifier_call_chain+0xd4/0x130
[ 203.649225] __inet_del_ifa+0x474/0xc10
[ 203.650016] devinet_ioctl+0x781/0x17f0
[ 203.650788] inet_ioctl+0x1ad/0x290
[ 203.651533] sock_do_ioctl+0xce/0x1c0
[ 203.652315] sock_ioctl+0x27b/0x4f0
[ 203.653058] __x64_sys_ioctl+0x124/0x190
[ 203.653850] do_syscall_64+0x35/0x80
[ 203.654608] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 203.666952] The buggy address belongs to the object at ffff888144df2000
which belongs to the cache kmalloc-256 of size 256
[ 203.669250] The buggy address is located 80 bytes inside of
256-byte region [ffff888144df2000, ffff888144df2100)
[ 203.671332] The buggy address belongs to the page:
[ 203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0
[ 203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0
[ 203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[ 203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40
[ 203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 203.679928] page dumped because: kasan: bad access detected
[ 203.681455] Memory state around the buggy address:
[ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.686701] ^
[ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.690620] ==================================================================
Fixes: ad11c4f1d8 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The arguments of update_buffer_lossy() is in a wrong order. Fix it.
Fixes: 88b3d5c90e ("net/mlx5e: Fix port buffers cell size value")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, match VLAN rule also matches packets that have multiple VLAN
headers. This behavior is similar to buggy flower classifier behavior that
has recently been fixed. Fix the issue by matching on
outer_second_cvlan_tag with value 0 which will cause the HW to verify the
packet doesn't contain second vlan header.
Fixes: 699e96ddf4 ("net/mlx5e: Support offloading tc double vlan headers match")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Resource dump menu may span over more than a single page, support it.
Otherwise, menu read may result in a memory access violation: reading
outside of the allocated page.
Note that page format of the first menu page contains menu headers while
the proceeding menu pages contain only records.
The KASAN logs are as follows:
BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0
Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496
CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x140
? strcmp+0x9b/0xb0
? strcmp+0x9b/0xb0
kasan_report.cold+0x83/0xdf
? strcmp+0x9b/0xb0
strcmp+0x9b/0xb0
mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core]
? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x286/0x400
? raw_spin_unlock_irqrestore+0x47/0x50
? aomic_notifier_chain_register+0x32/0x40
mlx5_load+0x104/0x2e0 [mlx5_core]
mlx5_init_one+0x41b/0x610 [mlx5_core]
....
The buggy address belongs to the object at ffff88812b2e0000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 4048 bytes to the right of
4096-byte region [ffff88812b2e0000, ffff88812b2e1000)
The buggy address belongs to the page:
page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0
head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040
raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 12206b1723 ("net/mlx5: Add support for resource dump")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When OVS internal port is the vtep device, the first decap
rule is matching on the internal port's vport metadata value
and then changes the metadata to be the uplink's value.
Therefore, following rules on the tunnel, in chain > 0, should
avoid matching on internal port metadata and use the uplink
vport metadata instead.
Select the uplink's metadata value for the source vport match
in case the rule is in chain greater than zero, even if the tunnel
route device is internal port.
Fixes: 166f431ec6 ("net/mlx5e: Add indirect tc offload of ovs internal port")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Michael Chan says:
====================
bnxt_en: Bug fixes
This patch series includes 3 fixes:
- Fix an occasional VF open failure.
- Fix a PTP spinlock usage before initialization
- Fix unnecesary RX packet drops under high TX traffic load.
====================
Link: https://lore.kernel.org/r/1651540392-2260-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true,
we are in NAPI polling mode and we will call __bnxt_poll_cqs() to
continue polling. It is possible to exhanust the budget again when
__bnxt_poll_cqs() returns.
We then enter the main while loop to check for new entries in the NQ.
If we had previously exhausted the NAPI budget, we may call
__bnxt_poll_work() to process an RX entry with zero budget. This will
cause packets to be dropped unnecessarily, thinking that we are in the
netpoll path. Fix it by breaking out of the while loop if we need
to process an RX NQ entry with no budget left. We will then exit
NAPI and stay in polling mode.
Fixes: 389a877a3b ("bnxt_en: Process the NQ under NAPI continuous polling.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock
spinlock. The spinlock is not initialized until later. Move the
bnxt_ptp_init_rtc() call after the spinlock is initialized.
Fixes: 24ac1ecd52 ("bnxt_en: Add driver support to use Real Time Counter for PTP")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
