was a pretty active cycle for KVM. Changes include:
- a lot of s390 changes: optimizations, support for migration,
GDB support and more
- ARM changes are pretty small: support for the PSCI 0.2 hypercall
interface on both the guest and the host (the latter acked by Catalin)
- initial POWER8 and little-endian host support
- support for running u-boot on embedded POWER targets
- pretty large changes to MIPS too, completing the userspace interface
and improving the handling of virtualized timer hardware
- for x86, a larger set of changes is scheduled for 3.17. Still,
we have a few emulator bugfixes and support for running nested
fully-virtualized Xen guests (para-virtualized Xen guests have
always worked). And some optimizations too.
The only missing architecture here is ia64. It's not a coincidence
that support for KVM on ia64 is scheduled for removal in 3.17.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=j5Od
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next
Pull KVM updates from Paolo Bonzini:
"At over 200 commits, covering almost all supported architectures, this
was a pretty active cycle for KVM. Changes include:
- a lot of s390 changes: optimizations, support for migration, GDB
support and more
- ARM changes are pretty small: support for the PSCI 0.2 hypercall
interface on both the guest and the host (the latter acked by
Catalin)
- initial POWER8 and little-endian host support
- support for running u-boot on embedded POWER targets
- pretty large changes to MIPS too, completing the userspace
interface and improving the handling of virtualized timer hardware
- for x86, a larger set of changes is scheduled for 3.17. Still, we
have a few emulator bugfixes and support for running nested
fully-virtualized Xen guests (para-virtualized Xen guests have
always worked). And some optimizations too.
The only missing architecture here is ia64. It's not a coincidence
that support for KVM on ia64 is scheduled for removal in 3.17"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
KVM: add missing cleanup_srcu_struct
KVM: PPC: Book3S PR: Rework SLB switching code
KVM: PPC: Book3S PR: Use SLB entry 0
KVM: PPC: Book3S HV: Fix machine check delivery to guest
KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
KVM: PPC: Book3S HV: Fix dirty map for hugepages
KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
KVM: PPC: Book3S: Add ONE_REG register names that were missed
KVM: PPC: Add CAP to indicate hcall fixes
KVM: PPC: MPIC: Reset IRQ source private members
KVM: PPC: Graciously fail broken LE hypercalls
PPC: ePAPR: Fix hypercall on LE guest
KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
KVM: PPC: BOOK3S: Always use the saved DAR value
PPC: KVM: Make NX bit available with magic page
KVM: PPC: Disable NX for old magic page using guests
KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
...
Pull x86/UV changes from Ingo Molnar:
"Continued updates for SGI UV 3 hardware support"
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/UV: Fix conditional in gru_exit()
x86/UV: Set n_lshift based on GAM_GR_CONFIG MMR for UV3
Pull x86 RAS changes from Ingo Molnar:
"Improve mcheck device initialization and bootstrap robustness"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mce: Panic when a core has reached a timeout
x86/mce: Improve mcheck_init_device() error handling
Pull x86 IOSF platform updates from Ingo Molnar:
"IOSF (Intel OnChip System Fabric) updates:
- generalize the IOSF interface to allow mixed mode drivers: non-IOSF
drivers to utilize of IOSF features on IOSF platforms.
- add 'Quark X1000' IOSF/MBI support
- clean up BayTrail and Quark PCI ID enumeration"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, iosf: Add PCI ID macros for better readability
x86, iosf: Add Quark X1000 PCI ID
x86, iosf: Added Quark MBI identifiers
x86, iosf: Make IOSF driver modular and usable by more drivers
Pull x86 microcode changes from Ingo Molnar:
"A microcode-debugging boot flag plus related refactoring"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode: Add a disable chicken bit
x86, boot: Carve out early cmdline parsing function
Pull scheduler updates from Ingo Molnar:
"The main scheduling related changes in this cycle were:
- various sched/numa updates, for better performance
- tree wide cleanup of open coded nice levels
- nohz fix related to rq->nr_running use
- cpuidle changes and continued consolidation to improve the
kernel/sched/idle.c high level idle scheduling logic. As part of
this effort I pulled cpuidle driver changes from Rafael as well.
- standardized idle polling amongst architectures
- continued work on preparing better power/energy aware scheduling
- sched/rt updates
- misc fixlets and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
sched/numa: Decay ->wakee_flips instead of zeroing
sched/numa: Update migrate_improves/degrades_locality()
sched/numa: Allow task switch if load imbalance improves
sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
sched: Initialize rq->age_stamp on processor start
sched, nohz: Change rq->nr_running to always use wrappers
sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
sched: Use clamp() and clamp_val() to make sys_nice() more readable
sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
sched/numa: Fix initialization of sched_domain_topology for NUMA
sched: Call select_idle_sibling() when not affine_sd
sched: Simplify return logic in sched_read_attr()
sched: Simplify return logic in sched_copy_attr()
sched: Fix exec_start/task_hot on migrated tasks
arm64: Remove TIF_POLLING_NRFLAG
metag: Remove TIF_POLLING_NRFLAG
sched/idle: Make cpuidle_idle_call() void
sched/idle: Reflow cpuidle_idle_call()
sched/idle: Delay clearing the polling bit
...
Pull perf updates from Ingo Molnar:
"The tooling changes maintained by Jiri Olsa until Arnaldo is on
vacation:
User visible changes:
- Add -F option for specifying output fields (Namhyung Kim)
- Propagate exit status of a command line workload for record command
(Namhyung Kim)
- Use tid for finding thread (Namhyung Kim)
- Clarify the output of perf sched map plus small sched command
fixes (Dongsheng Yang)
- Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
- Factor hists statistics counts processing which in turn also fixes
several bugs in TUI report command (Namhyung Kim)
- Add --percentage option to control absolute/relative percentage
output (Namhyung Kim)
- Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by
completion scripts (Ramkumar Ramachandra)
Development/infrastructure changes and fixes:
- Android related fixes for pager and map dso resolving (Michael
Lentine)
- Add libdw DWARF post unwind support for ARM (Jean Pihet)
- Consolidate types.h for ARM and ARM64 (Jean Pihet)
- Fix possible null pointer dereference in session.c (Masanari Iida)
- Cleanup, remove unused variables in map_switch_event() (Dongsheng
Yang)
- Remove nr_state_machine_bugs in perf latency (Dongsheng Yang)
- Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra)
- Cleanups for perf.h header (Jiri Olsa)
- Consolidate types.h and export.h within tools (Borislav Petkov)
- Move u64_swap union to its single user's header, evsel.h (Borislav
Petkov)
- Fix for s390 to properly parse tracepoints plus test code
(Alexander Yarygin)
- Handle EINTR error for readn/writen (Namhyung Kim)
- Add a test case for hists filtering (Namhyung Kim)
- Share map_groups among threads of the same group (Arnaldo Carvalho
de Melo, Jiri Olsa)
- Making some code (cpu node map and report parse callchain callback)
global to be usable by upcomming changes (Don Zickus)
- Fix pmu object compilation error (Jiri Olsa)
Kernel side changes:
- intrusive uprobes fixes from Oleg Nesterov. Since the interface is
admin-only, and the bug only affects user-space ("any probed
jmp/call can kill the application"), we queued these fixes via the
development tree, as a special exception.
- more fuzzer motivated race fixes and related refactoring and
robustization.
- allow PMU drivers to be built as modules. (No actual module yet,
because the x86 Intel uncore module wasn't ready in time for this)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
perf tools: Add automatic remapping of Android libraries
perf tools: Add cat as fallback pager
perf tests: Add a testcase for histogram output sorting
perf tests: Factor out print_hists_*()
perf tools: Introduce reset_output_field()
perf tools: Get rid of obsolete hist_entry__sort_list
perf hists: Reset width of output fields with header length
perf tools: Skip elided sort entries
perf top: Add --fields option to specify output fields
perf report/tui: Fix a bug when --fields/sort is given
perf tools: Add ->sort() member to struct sort_entry
perf report: Add -F option to specify output fields
perf tools: Call perf_hpp__init() before setting up GUI browsers
perf tools: Consolidate management of default sort orders
perf tools: Allow hpp fields to be sort keys
perf ui: Get rid of callback from __hpp__fmt()
perf tools: Consolidate output field handling to hpp format routines
perf tools: Use hpp formats to sort final output
perf tools: Support event grouping in hpp ->sort()
perf tools: Use hpp formats to sort hist entries
...
There is very little and maybe practically nothing we can do to recover
from a system where at least one core has reached a timeout during the
whole monarch cores gathering. So panic when that happens.
Link: http://lkml.kernel.org/r/20140523091041.GA21332@pd.tnic
Signed-off-by: Borislav Petkov <bp@suse.de>
Pull perf fixes from Ingo Molnar:
"The biggest changes are fixes for races that kept triggering Trinity
crashes, plus liblockdep build fixes and smaller misc fixes.
The liblockdep bits in perf/urgent are a pull mistake - they should
have been in locking/urgent - but by the time I noticed other commits
were added and testing was done :-/ Sorry about that"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix a race between ring_buffer_detach() and ring_buffer_attach()
perf: Prevent false warning in perf_swevent_add
perf: Limit perf_event_attr::sample_period to 63 bits
tools/liblockdep: Remove all build files when doing make clean
tools/liblockdep: Build liblockdep from tools/Makefile
perf/x86/intel: Fix Silvermont's event constraints
perf: Fix perf_event_init_context()
perf: Fix race in removing an event
Print the AGP bridge info the same way as the rest of the kernel, e.g.,
"0000:00:04.0" instead of "00:04:00".
Also print the AGP aperture address range the same way we print resources,
and label it explicitly as a bus address range.
No functional change except the message changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Replace printk() with pr_info(), pr_err(), etc. Define pr_fmt() to prefix
output with "AGP: ".
No functional change except the addition of "AGP: " prefix in dmesg output.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
I noticed on some of my systems that page fault tracing doesn't
work:
cd /sys/kernel/debug/tracing
echo 1 > events/exceptions/enable
cat trace;
# nothing shows up
I eventually traced it down to CONFIG_KVM_GUEST. At least in a
KVM VM, enabling that option breaks page fault tracing, and
disabling fixes it. I tried on some old kernels and this does
not appear to be a regression: it never worked.
There are two page-fault entry functions today. One when tracing
is on and another when it is off. The KVM code calls do_page_fault()
directly instead of calling the traced version:
> dotraplinkage void __kprobes
> do_async_page_fault(struct pt_regs *regs, unsigned long
> error_code)
> {
> enum ctx_state prev_state;
>
> switch (kvm_read_and_reset_pf_reason()) {
> default:
> do_page_fault(regs, error_code);
> break;
> case KVM_PV_REASON_PAGE_NOT_PRESENT:
I'm also having problems with the page fault tracing on bare
metal (same symptom of no trace output). I'm unsure if it's
related.
Steven had an alternative to this which has zero overhead when
tracing is off where this includes the standard noops even when
tracing is disabled. I'm unconvinced that the extra complexity
of his apporach:
http://lkml.kernel.org/r/20140508194508.561ed220@gandalf.local.home
is worth it, expecially considering that the KVM code is already
making page fault entry slower here. This solution is
dirt-simple.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I haven't touched the device interrupt code, which is different
enough that it's probably not worth merging, and I haven't done
anything about paranoidzeroentry_ist yet.
This appears to produce an entry_64.o file that differs only in the
debug info line numbers.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/e7a6acfb130471700370e77af9e4b4b6ed46f5ef.1400709717.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add a cmdline param which disables the microcode loader. This is useful
mostly in debugging situations where we want to turn off microcode
loading, both early from the initrd and late, as a means to be able to
rule out its influence on the machine.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1400525957-11525-3-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This patch fixes a bug in precise_store_data_hsw() whereby
it would set the data source memory level to the wrong value.
As per the the SDM Vol 3b Table 18-41 (Layout of Data Linear
Address Information in PEBS Record), when status bit 0 is set
this is a L1 hit, otherwise this is a L1 miss.
This patch encodes the memory level according to the specification.
In V2, we added the filtering on the store events.
Only the following events produce L1 information:
* MEM_UOPS_RETIRED.STLB_MISS_STORES
* MEM_UOPS_RETIRED.LOCK_STORES
* MEM_UOPS_RETIRED.SPLIT_STORES
* MEM_UOPS_RETIRED.ALL_STORES
Cc: mingo@elte.hu
Cc: acme@ghostprotocols.net
Cc: jolsa@redhat.com
Cc: jmario@redhat.com
Cc: ak@linux.intel.com
Tested-and-Reviewed-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140515155644.GA3884@quad
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Checkin:
b3b42ac2cb x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
disabled 16-bit segments on 64-bit kernels due to an information
leak. However, it does seem that people are genuinely using Wine to
run old 16-bit Windows programs on Linux.
A proper fix for this ("espfix64") is coming in the upcoming merge
window, but as a temporary fix, create a sysctl to allow the
administrator to re-enable support for 16-bit segments.
It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If
you hit this issue and care about your old Windows program more than
you care about a kernel stack address information leak, you can do
echo 1 > /proc/sys/abi/ldt16
as root (add it to your startup scripts), and you should be ok.
The sysctl table is only added if you have COMPAT support enabled on
x86-64, but I assume anybody who runs old windows binaries very much
does that ;)
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com
Cc: <stable@vger.kernel.org>
One can logically expect that when the user has specified "nordrand",
the user doesn't want any use of the CPU random number generator,
neither RDRAND nor RDSEED, so disable both.
Reported-by: Stephan Mueller <smueller@chronox.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Link: http://lkml.kernel.org/r/21542339.0lFnPSyGRS@myon.chronox.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently drivers that run on non-IOSF systems (Core/Xeon) can't use the IOSF
driver on SOC's without selecting it which forces an unnecessary and limiting
dependency. Provides dummy functions to allow these modules to conditionally
use the driver on IOSF equipped platforms without impacting their ability to
compile and load on non-IOSF platforms. Build default m to ensure availability
on x86 SOC's.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-2-git-send-email-david.e.box@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit
systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall()
may lose upper bits or, worse, add them since compiler will do this:
(u64)(tk->wall_to_monotonic.tv_nsec << tk->shift)
instead of
((u64)tk->wall_to_monotonic.tv_nsec << tk->shift)
So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up
with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in
the subsequent 'while' loop.
We need an explicit cast.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1399648287-15178-1-git-send-email-boris.ostrovsky@oracle.com
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Standardize the idle polling indicator to TIF_POLLING_NRFLAG such that
both TIF_NEED_RESCHED and TIF_POLLING_NRFLAG are in the same word.
This will allow us, using fetch_or(), to both set NEED_RESCHED and
check for POLLING_NRFLAG in a single operation and avoid pointless
wakeups.
Changing from the non-atomic thread_info::status flags to the atomic
thread_info::flags shouldn't be a big issue since most polling state
changes were followed/preceded by a full memory barrier anyway.
Also, fix up the apm_32 idle function, clearly that was forgotten in
the last conversion. The default idle state is !POLLING so just kill
the lot.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Link: http://lkml.kernel.org/n/tip-7yksmqtlv4nfowmlqr1rifoi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
HPET on current Baytrail platform has accuracy problem to be
used as reliable clocksource/clockevent, so add a early quirk to
disable it.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1398327498-13163-2-git-send-email-feng.tang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
HPET on some platform has accuracy problem. Making
"boot_hpet_disable" extern so that we can runtime disable
the HPET timer by using quirk to check the platform.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1398327498-13163-1-git-send-email-feng.tang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Event 0x013c is not the same as fixed counter2, remove it from
Silvermont's event constraints.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1398755081-12471-1-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As requested by Linus add explicit __visible to the asmlinkage users.
This marks all functions visible to assembler.
Tree sweep for arch/x86/*
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull irq fixes from Thomas Gleixner:
"This udpate delivers:
- A fix for dynamic interrupt allocation on x86 which is required to
exclude the GSI interrupts from the dynamic allocatable range.
This was detected with the newfangled tablet SoCs which have GPIOs
and therefor allocate a range of interrupts. The MSI allocations
already excluded the GSI range, so we never noticed before.
- The last missing set_irq_affinity() repair, which was delayed due
to testing issues
- A few bug fixes for the armada SoC interrupt controller
- A memory allocation fix for the TI crossbar interrupt controller
- A trivial kernel-doc warning fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: irq-crossbar: Not allocating enough memory
irqchip: armanda: Sanitize set_irq_affinity()
genirq: x86: Ensure that dynamic irq allocation does not conflict
linux/interrupt.h: fix new kernel-doc warnings
irqchip: armada-370-xp: Fix releasing of MSIs
irqchip: armada-370-xp: implement the ->check_device() msi_chip operation
irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
Pull x86 fixes from Peter Anvin:
"Two very small changes: one fix for the vSMP Foundation platform, and
one to help LLVM not choke on options it doesn't understand (although
it probably should)"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vsmp: Fix irq routing
x86: LLVMLinux: Wrap -mno-80387 with cc-option
On x86 the allocation of irq descriptors may allocate interrupts which
are in the range of the GSI interrupts. That's wrong as those
interrupts are hardwired and we don't have the irq domain translation
like PPC. So one of these interrupts can be hooked up later to one of
the devices which are hard wired to it and the io_apic init code for
that particular interrupt line happily reuses that descriptor with a
completely different configuration so hell breaks lose.
Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs,
except for a few usage sites which have not yet blown up in our face
for whatever reason. But for drivers which need an irq range, like the
GPIO drivers, we have no limit in place and we don't want to expose
such a detail to a driver.
To cure this introduce a function which an architecture can implement
to impose a lower bound on the dynamic interrupt allocations.
Implement it for x86 and set the lower bound to nr_gsi_irqs, which is
the end of the hardwired interrupt space, so all dynamic allocations
happen above.
That not only allows the GPIO driver to work sanely, it also protects
the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and
htirq code. They need to be cleaned up as well, but that's a separate
issue.
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Krogerus Heikki <heikki.krogerus@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Correct IRQ routing in case a vSMP box is detected
but the Interrupt Routing Comply (IRC) value is set to
"comply", which leads to incorrect IRQ routing.
Before the patch:
When a vSMP box was detected and IRC was set to "comply",
users (and the kernel) couldn't effectively set the
destination of the IRQs. This is because the hook inside
vsmp_64.c always setup all CPUs as the IRQ destination using
cpumask_setall() as the return value for IRQ allocation mask.
Later, this "overrided" mask caused the kernel to set the IRQ
destination to the lowest online CPU in the mask (CPU0 usually).
After the patch:
When the IRC is set to "comply", users (and the kernel) can control
the destination of the IRQs as we will not be changing the
default "apic->vector_allocation_domain".
Signed-off-by: Oren Twaig <oren@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Link: http://lkml.kernel.org/r/1398669697-2123-1-git-send-email-oren@scalemp.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes a bug introduced by:
2422365780 ("perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU")
The rdmsrl_safe() function returns 0 on success.
The current code was failing to detect the RAPL PMU
on real hardware (missing /sys/devices/power) because
the return value of rdmsrl_safe() was misinterpreted.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Venkatesh Srinivas <venkateshs@google.com>
Cc: peterz@infradead.org
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/20140423170418.GA12767@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fix from Ingo Molnar:
"This fixes the preemption-count imbalance crash reported by Owen
Kibel"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix CMCI preemption bugs
x86 is strongly ordered and all its atomic ops imply a full barrier.
Implement the two new primitives as the old ones were.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-knswsr5mldkr0w1lrdxvc81w@git.kernel.org
Cc: Dave Jones <davej@redhat.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CPUs which should support the RAPL counters according to
Family/Model/Stepping may still issue #GP when attempting to access
the RAPL MSRs. This may happen when Linux is running under KVM and
we are passing-through host F/M/S data, for example. Use rdmsrl_safe
to first access the RAPL_POWER_UNIT MSR; if this fails, do not
attempt to use this PMU.
Signed-off-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1394739386-22260-1-git-send-email-venkateshs@google.com
Cc: zheng.z.yan@intel.com
Cc: eranian@google.com
Cc: ak@linux.intel.com
Cc: linux-kernel@vger.kernel.org
[ The patch also silently fixes another bug: rapl_pmu_init() didn't handle the memory alloc failure case previously. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change branch_setup_xol_ops() to simply use opc1 = OPCODE2(insn) - 0x10
if OPCODE1() == 0x0f; this matches the "short" jmp which checks the same
condition.
Thanks to lib/insn.c, it does the rest correctly. branch->ilen/offs are
correct no matter if this jmp is "near" or "short".
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Teach branch_emulate_op() to emulate the conditional "short" jmp's which
check regs->flags.
Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz.
They all are rel8 and thus they can't trigger the problem, but perhaps
we will add the support in future just for completeness.
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
See the previous "Emulate unconditional relative jmp's" which explains
why we can not execute "jmp" out-of-line, the same applies to "call".
Emulating of rip-relative call is trivial, we only need to additionally
push the ret-address. If this fails, we execute this instruction out of
line and this should trigger the trap, the probed application should die
or the same insn will be restarted if a signal handler expands the stack.
We do not even need ->post_xol() for this case.
But there is a corner (and almost theoretical) case: another thread can
expand the stack right before we execute this insn out of line. In this
case it hit the same problem we are trying to solve. So we simply turn
the probed insn into "call 1f; 1:" and add ->post_xol() which restores
->sp and restarts.
Many thanks to Jonathan who finally found the standalone reproducer,
otherwise I would never resolve the "random SIGSEGV's under systemtap"
bug-report. Now that the problem is clear we can write the simplified
test-case:
void probe_func(void), callee(void);
int failed = 1;
asm (
".text\n"
".align 4096\n"
".globl probe_func\n"
"probe_func:\n"
"call callee\n"
"ret"
);
/*
* This assumes that:
*
* - &probe_func = 0x401000 + a_bit, aligned = 0x402000
*
* - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000
* as xol_add_vma() asks; the 1st slot = 0x7fffffffe080
*
* so we can target the non-canonical address from xol_vma using
* the simple math below, 100 * 4096 is just the random offset
*/
asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n");
void callee(void)
{
failed = 0;
}
int main(void)
{
probe_func();
return failed;
}
It SIGSEGV's if you probe "probe_func" (although this is not very reliable,
randomize_va_space/etc can change the placement of xol area).
Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8)
differently. This patch relies on lib/insn.c and thus implements the intel's
behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use
this insn, so we postpone the fix until we decide what should we do; emulate
or not, support or not, etc.
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Finally we can kill the ugly (and very limited) code in __skip_sstep().
Just change branch_setup_xol_ops() to treat "nop" as jmp to the next insn.
Thanks to lib/insn.c, it is clever enough. OPCODE1() == 0x90 includes
"(rep;)+ nop;" at least, and (afaics) much more.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
