There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found during
runtime testing. Most of these changes are machine specific fixups, but
there are a few notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets
updated again.
The main driver fix is also for Qualcomm platofrms, rewriting an interface
in the QSEECOM firmware support that could lead to crashing the kernel
from a trusted application. The only other code changes are minor fixes
for Mediatek SoC drivers.
-----BEGIN PGP SIGNATURE-----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=p4SI
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found
during runtime testing.
Most of these changes are machine specific fixups, but there are a few
notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets updated
again.
The main driver fix is also for Qualcomm platforms, rewriting an
interface in the QSEECOM firmware support that could lead to crashing
the kernel from a trusted application.
The only other code changes are minor fixes for Mediatek SoC drivers"
* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
...
This fixes some dts validation issues against bindings for multiple SoCs,
GPU voltage constraints for Chromebook devices, missing gce-client-reg
on various nodes (performance issues) on MT8183/92/95, and also fixes
boot issues on MT8195 when SPMI is built as module.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZieKGigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4/BkA/0im
1rIf+T0cT+yl20lQpkH7CXxFWy7OMlbJhzVH64r9AP479XqrDdHogP+3AtVZ0WUv
X3EPgJuSQQecXuw6sJdgAA==
=7a1z
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into for-next
MediaTek ARM64 DTS fixes for v6.9
This fixes some dts validation issues against bindings for multiple SoCs,
GPU voltage constraints for Chromebook devices, missing gce-client-reg
on various nodes (performance issues) on MT8183/92/95, and also fixes
boot issues on MT8195 when SPMI is built as module.
* tag 'mtk-dts64-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt2712: fix validation errors
arm64: dts: mediatek: mt7986: prefix BPI-R3 cooling maps with "map-"
arm64: dts: mediatek: mt7986: drop invalid thermal block clock
arm64: dts: mediatek: mt7986: drop "#reset-cells" from Ethernet controller
arm64: dts: mediatek: mt7986: drop invalid properties from ethsys
arm64: dts: mediatek: mt7622: drop "reset-names" from thermal block
arm64: dts: mediatek: mt7622: fix ethernet controller "compatible"
arm64: dts: mediatek: mt7622: fix IR nodename
arm64: dts: mediatek: mt7622: fix clock controllers
arm64: dts: mediatek: mt8186-corsola: Update min voltage constraint for Vgpu
arm64: dts: mediatek: mt8183-kukui: Use default min voltage for MT6358
arm64: dts: mediatek: mt8195-cherry: Update min voltage constraint for MT6315
arm64: dts: mediatek: mt8192-asurada: Update min voltage constraint for MT6315
arm64: dts: mediatek: cherry: Describe CPU supplies
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex1
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to vpp/vdosys
arm64: dts: mediatek: mt8192: Add missing gce-client-reg to mutex
arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg
This corrects the watchdog IRQ flags for a number of remoteproc
instances, which otherwise prevents the driver from probe in the face of
a probe deferral.
Improvements in other areas, such as USB, have made it possible for CX
rail voltage on SC8280XP to be lowered, no longer meeting requirements
of active PCIe controllers. Necessary votes are added to these
controllers.
The MSI definitions for PCIe controllers in SM8450, SM8550, and SM8650
was incorrect, due to a bug in the driver. As this has now been fixed
the definition needs to be corrected.
Lastly, the SuperSpeed PHY irq of the second USB controller in SC8180x,
and the compatible string for X1 Elite domain idle states are corrected.
-----BEGIN PGP SIGNATURE-----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=DKVX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=M9KC
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into for-next
Qualcomm Arm64 DeviceTree fixes for v6.9
This corrects the watchdog IRQ flags for a number of remoteproc
instances, which otherwise prevents the driver from probe in the face of
a probe deferral.
Improvements in other areas, such as USB, have made it possible for CX
rail voltage on SC8280XP to be lowered, no longer meeting requirements
of active PCIe controllers. Necessary votes are added to these
controllers.
The MSI definitions for PCIe controllers in SM8450, SM8550, and SM8650
was incorrect, due to a bug in the driver. As this has now been fixed
the definition needs to be corrected.
Lastly, the SuperSpeed PHY irq of the second USB controller in SC8180x,
and the compatible string for X1 Elite domain idle states are corrected.
* tag 'qcom-arm64-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
Link: https://lore.kernel.org/r/20240420161002.1132240-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* 'v6.9-armsoc/dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
arm64: dts: rockchip: Designate the system power controller on QuartzPro64
arm64: dts: rockchip: drop panel port unit address in GRU Scarlet
arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi CM5
arm64: dts: rockchip: add regulators for PCIe on RK3399 Puma Haikou
arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma
arm64: dts: rockchip: enable internal pull-up on Q7_USB_ID for RK3399 Puma
arm64: dts: rockchip: fix alphabetical ordering RK3399 puma
arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma
arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
Link: https://lore.kernel.org/r/3413596.CbtlEUcBR6@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The first CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT,
the second CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT,
both clock are supplied from SYS_PLL2 and configured using assigned-clock DT
properties. Each CSI2 DT node configures its IMX8MP_CLK_MEDIA_CAMn_PIX_ROOT
clock. This used to be the case until likely a copy-paste error in commit
f78835d1e6 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M")
which changed the second CSI2 node to configure IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT
using its assigned-clocks property.
Fix the second CSI2 assigned-clock property back to the original correct
IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT .
Fixes: f78835d1e6 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Fix a kernel fault during page table walking in huge_pte_alloc() with
PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc()
- head.S fix and cleanup to disable the MMU before toggling the
HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI
stub. Changing this bit (currently from VHE to nVHE) causes some
system registers as well as page table descriptors to be interpreted
differently, potentially resulting in spurious MMU faults
- Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP memory
ranges due to kernel_page_present() returning true in most
configurations other than rodata_full == true,
CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y
-----BEGIN PGP SIGNATURE-----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=UvpI
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix a kernel fault during page table walking in huge_pte_alloc() with
PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc()
- head.S fix and cleanup to disable the MMU before toggling the
HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI
stub. Changing this bit (currently from VHE to nVHE) causes some
system registers as well as page table descriptors to be interpreted
differently, potentially resulting in spurious MMU faults
- Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP
memory ranges due to kernel_page_present() returning true in most
configurations other than rodata_full == true,
CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hibernate: Fix level3 translation fault in swsusp_save()
arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
arm64/head: Drop unnecessary pre-disable-MMU workaround
arm64/hugetlb: Fix page table walk in huge_pte_alloc()
Even though the boot protocol stipulates otherwise, an exception has
been made for the EFI stub, and entering the core kernel with the MMU
enabled is permitted. This allows a substantial amount of cache
maintenance to be elided, wich is significant when fast boot times are
critical (e.g., for booting micro-VMs)
Once the initial ID map has been populated, the MMU is disabled as part
of the logic sequence that puts all system registers into a known state.
Any code that needs to execute within the window where the MMU is off is
cleaned to the PoC explicitly, which includes all of HYP text when
entering at EL2.
However, the current sequence of initializing the EL2 system registers
is not safe: HCR_EL2 is set to its nVHE initial state before SCTLR_EL2
is reprogrammed, and this means that a VHE-to-nVHE switch may occur
while the MMU is enabled. This switch causes some system registers as
well as page table descriptors to be interpreted in a different way,
potentially resulting in spurious exceptions relating to MMU
translation.
So disable the MMU explicitly first when entering in EL2 with the MMU
and caches enabled.
Fixes: 6178617038 ("efi: arm64: enter with MMU and caches enabled")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240415075412.2347624-6-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Falkor erratum that results in the need for an ISB before clearing
the M bit in SCTLR_ELx only applies to execution at exception level x,
and so the workaround is not needed when disabling the EL1 MMU while
running at EL2.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240415075412.2347624-5-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The correct compatible string for a USB interface node begins with
"usbif", not "usb". Fix the Rockchip RK3399 based Kobol Helios64 board.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240412204405.3703638-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
KVM/arm64 to miss dirty pages due to stale TLB entries.
-----BEGIN PGP SIGNATURE-----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=0ljm
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix the TLBI RANGE operand calculation causing live migration under
KVM/arm64 to miss dirty pages due to stale TLB entries"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Fix TLBI RANGE operand
The device tree changes this time are all for NXP i.MX platforms, addressing
issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor
bug fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYZjn8ACgkQYKtH/8kJ
UidrDQ/+MISVzAtuF9ZVpGC8K7QTHjd/Izv7lDFQq+Um1AM1CCHlb1SyKintdDCK
qQBn9TXElP5K1j3+9wAooShqvZI9CFLNQm7qg0f16rX2EGoV1ZTNQnAru6c/E0iq
8Sxe7xE0gk9ju5VfYNBt8suBtetFwU+x5befODmTh4TP2dvOkewB7GF90E2z43yr
/JD5IMDGboxomdQ0vWhvQpI++GBjxAolXRFA/uIdr91PnD76WamXIG2kRxBVZnCF
/Z/VIKrBJ4iRntrOwtZLocbDwfUCEMNITx4NuSsbu0JWgm6+Eucf8j9/G1v7zSZ6
hT5v4L742clGHs1GLYPA9rRfejaWb6x2aUgm2JZ0vF6JG8ZMBKllUVxlwye/kJ8Y
SizZDX1ztRN/tlFGMkkreb22gYNZxFG5HtilGwQ+/sH8mgjhGaiU3VywiraSDWBg
5ksGXAuwWDyHb9GHL5a/lbYB6hsvPKzoCNIEluuFbL2Fpz+vpBeD21EZWYwmnKLi
U/YJc0eYge6MrWn+6960rTs+7ZouuAejPyJcPzjz1Gz2Lsapa4zwLuX2vtSavEC2
Hl5DqnB6/vRdEQml4tDukt1uJ3guFdDa2a7RE2EVgSwKqScnUH40Tb7GLE/fQL/o
Nr1Mdz0T48PG9pvur9i1TdiWZqhrjsEID/xmYheIzJa4bQyrh+s=
=qMYh
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The device tree changes this time are all for NXP i.MX platforms,
addressing issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores"
* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
MAINTAINERS: Change Krzysztof Kozlowski's email address
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
cache: sifive_ccache: Partially convert to a platform driver
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
...
The ACPI DSDT of the Surface Pro X (SQ2) specifies the interrupts for
the secondary UBS controller as
Name (_CRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
{
0x000000AA,
}
Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
{
0x000000A7, // hs_phy_irq: &intc GIC_SPI 136
}
Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
{
0x00000228, // ss_phy_irq: &pdc 40
}
Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
{
0x0000020A, // dm_hs_phy_irq: &pdc 10
}
Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
{
0x0000020B, // dp_hs_phy_irq: &pdc 11
}
})
Generally, the interrupts above 0x200 map to the PDC interrupts (as used
in the devicetree) as ACPI_NUMBER - 0x200. Note that this lines up with
dm_hs_phy_irq and dp_hs_phy_irq (as well as the interrupts for the
primary USB controller).
Based on the snippet above, ss_phy_irq should therefore be PDC 40 (=
0x28) and not PDC 7. The latter is according to ACPI instead used as
ss_phy_irq for port 0 of the multiport USB controller). Fix this by
setting ss_phy_irq to '&pdc 40'.
Fixes: b080f53a8f ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240328022224.336938-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Fixes: a33a532b3b ("arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-3-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Fixes: 114990ce3e ("arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-2-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Cc: stable@vger.kernel.org # 6.3: bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly")
Fixes: ff384ab56f ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-1-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The compatible's for the cluster/domain idle states of x1e80100
are wrong, fix it.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240317132918.1068817-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The code in qcom_q6v5_init() requests the "wdog" IRQ as
IRQF_TRIGGER_RISING. If dt defines the interrupt type as LEVEL_HIGH then
the driver will have issues getting the IRQ again after probe deferral
with an error like:
irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
Fix that by updating the devicetrees to use IRQ_TYPE_EDGE_RISING for
these interrupts, as is already used in most dt's. Also the driver was
already using the interrupts with that type.
Fixes: 3658e411ef ("arm64: dts: qcom: sc7280: Add ADSP node")
Fixes: df62402e5f ("arm64: dts: qcom: sc7280: Add CDSP node")
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Fixes: 8eb5287e8a ("arm64: dts: qcom: sm6350: Add CDSP nodes")
Fixes: efc33c969f ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Fixes: fe6fd26aed ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Fixes: 23a8903785 ("arm64: dts: qcom: sm8250: Add remoteprocs")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240219-remoteproc-irqs-v1-1-c5aeb02334bd@fairphone.com
[bjorn: Added fixes references]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly.
Fixes: 117940aa6e ("KVM: arm64: Define kvm_tlb_flush_vmid_range()")
Cc: stable@kernel.org # v6.6+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-2-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With default dts configuration for BPI-R2Pro, the regulator for sd card is
powered off when reboot is commanded, and the only solution to detect the
sd card again, and therefore, allow rebooting from there, is to do a
hardware reset.
Configure the regulator for sd to be always on for BPI-R2Pro in order to
avoid this issue.
Fixes: f901aaadaa ("arm64: dts: rockchip: Add Bananapi R2 Pro")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. This property looks
like some real hardware, just described wrongly. Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.
This fixes dtbs_check warning:
rk3568-lubancat-2.dtb: pcie@fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. This property looks
like some real hardware, just described wrongly. Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.
This fixes dtbs_check warning:
rk3566-lubancat-1.dtb: pcie@fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is no "pcie-reset-suspend" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. Drop the property,
but leave the comment, because it might be useful for someone.
This fixes dtbs_check warning:
rk3399-gru-scarlet-dumo.dtb: pcie@f8000000: Unevaluated properties are not allowed ('pcie-reset-suspend' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Mark the PMIC as system power controller, so the board will shut-down
properly and fix the typo on rk806_dvs1_null pins property.
Fixes: 236d225e1e ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240407173210.372585-1-efectn@6tel.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Designate the primary RK806 PMIC on the Pine64 QuartzPro64 as the system
power controller, so the board shuts down properly on poweroff(8).
Fixes: 152d3d070a9c ("arm64: dts: rockchip: Add QuartzPro64 SBC device tree")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/c602dfb3972a0844f2a87b6245bdc5c3378c5989.1712512497.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- A couple of i.MX7 board fixes from Fabio Estevam that use correct
'no-mmc' property and pass 'link-frequencies' for OV2680.
- A series from Frank Li to fix LPCG clock indices for i.MX8 subsystems.
- A couple of changes from Tim Harvey that fix USB VBUS regulator for
imx8mp-venice board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmYOakUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6TJwf9FXjyq5/iqt84oXWhOcYN5GfxkJ6x
7PoVEHk2YlGX1kyPLVZaQuHn9ABJdOvcALZKCjTJjresEkg61or1PCFUBE+rOqeb
0U5u005M073EdkkRzn2Fn1mDqIhWxNfCJ5N4wigTz985PqjEe3evjjL/Y1T8MXOG
Is4S+1g2imjwKJq6zLsre4QpO74Zi8cJHjoxPZMcmNIYoPHXoancNneuNQyTgGt4
YBpo5W1LwUQMBo5rstNdjELwbI5xfxrXsVBuW4XqQGd39BPDkX+IqXFPUH6atuH5
46v7atL+1vEiPWCkbxCE98/11VcW8UYh1njvdDP0O4bh66SEhjKHRm1NUw==
=2zFX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYVTs0ACgkQYKtH/8kJ
Uid4Vw//Si4Cw7yk9xe4xFXI7pYf46Cpgmg4Q75F8x6mJvy0jtYqIOFhwJH5INFj
Ry9EpvhYUkO7kGxe7OIE+m1hiY92Vcf9LFgnHkAaEed/gf47aTy+3Zougs9/ennN
0JbdxROK3P2nBWCIiVxDKtykMy7k9ZJlEZqGaof5icWlNPrirXzg7MO1hv33dMyR
fjQJKO2OOXNMUob6SJMJww7bkO5N5JjwsrD4U+FUOoPvbwfmWfI7bc5hMzmu89il
IwMxOcXrgkkUmCSO5KfGxjBTfMwxTHwRyk82iGU2b1sEXuBNBbMCbWKd6r42C91n
WF/4NFNIFdMawywa8bVAaHIrFw062vhXsgxruxUzKt1erwl7EwZa4sAPFGmtFQG+
3Itlf/pMb693l4DQRTqs/Q9qJsz2+TaD+SixiQ888aNCb5iLavX8rD2MdERLeuHo
nf64UGRjTlSw2y4ekBvwcsMHME1f76H3LY2ESW1oGlJj8q4tBML6jDqeIp4rC98K
XqWy/9IAlHSWRcFc+U0ED8DGlLIvrrskoPZG3dpe7qb+l1roJowefqp0FzHno93K
r7N2ZgEHPcb9qYbgvYJd4VYZ6A0ZqTyxq24naPhJdYWYJKnvvqOoN2h2Y6Ml9waZ
I6mNDRQuJ210k8ile76Nnyu9BRRLqRDgExQ1ZZP9LeHjgg6eKbo=
=6Ly1
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.9:
- A couple of i.MX7 board fixes from Fabio Estevam that use correct
'no-mmc' property and pass 'link-frequencies' for OV2680.
- A series from Frank Li to fix LPCG clock indices for i.MX8 subsystems.
- A couple of changes from Tim Harvey that fix USB VBUS regulator for
imx8mp-venice board.
* tag 'imx-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
Link: https://lore.kernel.org/r/Zg5rfaVVvD9egoBK@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
floating point state rather than the TIF_SVE flag. The latter may be
left on during syscalls even if the SVE state is discarded.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmYQPVQACgkQa9axLQDI
XvF0pg//WeFmSH9qweHXZixDrD5liVSEICSZcsoz0TsLXP+AbkCaFEEUsQ7MKfz8
Cb0AVQRLxkCRlRBTVaeUpPp6GqLB5VfUgBejjCLXI1C0fL0LwgeodQXdZGRZ1nqF
C0r6CZIw3IBD2IxQJ8CiIS6EQMYjldzopwVzJEkjGzFMU8ALrAQuQ66ILNyl9tp9
iCW6HkJ3caUtkBM99wxdHBd1CG12EkDiuFqlQBkzcaCOHiqjEdI1KUJtSz+n5ISr
+mYFz2aXZm78SQsvACyVoZjoLvVK8xk4ppCnXrFbrsP3t4XwJ/Cr5ToHbpTrCUym
I8zZyErbNT6N01Yw4OBtAMLz7em0+iKciMoTiyD0M9EFxgnJbWt6uA9pvU3oQgnL
DE4+gFuMQMUq2wMb0EMezAjT6PoxHSmfjRKJv+hvSjk7xW4drzl0jCx2oK5Pi+na
g4gQqkkzBgV71tIXoaVlQmbaR7Y+KpfA8KnFQQVplBG53fsHCsQuVCSNiCmx36er
2hBcEm4ntT56Zn5ZiEaGFFAS7SwlDD4JUmz947Kl4M97M9BRz6j4eERlg6lLsEzD
kwRyIYitvbDkyMxKDQijfmI/sS2ni9Q+F8l0HPFpSpKfCdgSwlqcFfFMtmXcOme9
aS4UPneYMobuU/u4G+xklXVzaeCjAMWHQQ8dENND2tqFC44aVfo=
=+BPs
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"arm64/ptrace fix to use the correct SVE layout based on the saved
floating point state rather than the TIF_SVE flag. The latter may be
left on during syscalls even if the SVE state is discarded"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Use saved floating point state type to determine SVE layout
1. Fixup infracfg clock controller binding
It also acts as reset controller so #reset-cells is required.
2. Use -pins suffix for pinctrl
This fixes:
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property
from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240301074741.8362-1-zajec5@gmail.com
[Angelo: Added Fixes tags]
Fixes: 5d4839709c ("arm64: dts: mt2712: Add clock controller device nodes")
Fixes: 1724f4cc51 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal-zones: cpu-thermal:cooling-maps: 'cpu-active-high', 'cpu-active-low', 'cpu-active-med' do not match any of the regexes: '^map[-a-zA-Z0-9]*$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
Fixes: c26f779a22 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213061459.17917-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Ethernet block doesn't include or act as a reset controller.
Documentation also doesn't document "#reset-cells" for it.
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: ethernet@15100000: Unevaluated properties are not allowed ('#reset-cells' was unexpected)
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
Fixes: 082ff36bd5 ("arm64: dts: mediatek: mt7986: introduce ethernet nodes")
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek ethsys controller / syscon binding doesn't allow any subnodes
so "#address-cells" and "#size-cells" are redundant (actually:
disallowed).
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: syscon@15000000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
Fixes: 1f9986b258 ("arm64: dts: mediatek: add clock support for mt7986a")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of
the newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT"
with better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting
to some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing problems,
incorrect checksum conversions, and incorrect packet transformations
which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6bQI
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
- Ensure perf events programmed to count during guest execution
are actually enabled before entering the guest in the nVHE
configuration.
- Restore out-of-range handler for stage-2 translation faults.
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches.
- Fix early handling of architectural VHE-only systems to ensure E2H is
appropriately set.
- Correct a format specifier warning in the arch_timer selftest.
- Make the KVM banner message correctly handle all of the possible
configurations.
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs().
- Fix APLIC setipnum_le/be write emulation.
- Fix APLIC in_clrip[x] read emulation.
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID entries (old
vs. new) and ultimately neglects to clear PV_UNHALT from vCPUs with HLT-exiting
disabled.
- Documentation fixes for SEV.
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP.
- Fix a 14-year-old goof in a declaration shared by host and guest; the enabled
field used by Linux when running as a guest pushes the size of "struct
kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is really unconsequential
because KVM never consumes anything beyond the first 64 bytes, but the
resulting struct does not match the documentation.
Selftests:
- Fix spelling mistake in arch_timer selftest.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmYMOJYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP2zAf/Z7/cK0+yFSvm7/tsbWtjnWofad/p
82puu0V+8lZSjGVs3AydiDCV+FahvLS0QIwgrffVr4XA10Km5ZZMjZyJ3uH4xki/
VFFsDnZPdKuj55T0wwN7JFn0YVOMdtgcP0b+F8aMbkL0uoJXjutOMKNhssuW12kw
9cmPjaBWm/bfrfoTUUB9mCh0Ub3HKpguYwTLQuf6Fyn2FK7oORpt87Zi+oIKUn6H
pFXFtZYduLg6M2LXvZqsXZLXnvABPjANNWEhiiwrvuF/wmXXTwTpvRXlYXhCvpAN
q0AhxPhPm3NnsmRhEB6SmoMjXyZIByezcEiqAspBrUvEqs/2u6VyzFMrXw==
=PlsI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Ensure perf events programmed to count during guest execution are
actually enabled before entering the guest in the nVHE
configuration
- Restore out-of-range handler for stage-2 translation faults
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches
- Fix early handling of architectural VHE-only systems to ensure E2H
is appropriately set
- Correct a format specifier warning in the arch_timer selftest
- Make the KVM banner message correctly handle all of the possible
configurations
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
entries (old vs. new) and ultimately neglects to clear PV_UNHALT
from vCPUs with HLT-exiting disabled
- Documentation fixes for SEV
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP
- Fix a 14-year-old goof in a declaration shared by host and guest;
the enabled field used by Linux when running as a guest pushes the
size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
really unconsequential because KVM never consumes anything beyond
the first 64 bytes, but the resulting struct does not match the
documentation
Selftests:
- Fix spelling mistake in arch_timer selftest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Rationalise KVM banner output
arm64: Fix early handling of FEAT_E2H0 not being implemented
KVM: arm64: Ensure target address is granule-aligned for range TLBI
KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
KVM: arm64: Don't pass a TLBI level hint when zapping table entries
KVM: arm64: Don't defer TLB invalidation when zapping table entries
KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
KVM: arm64: Fix out-of-IPA space translation fault handling
KVM: arm64: Fix host-programmed guest events in nVHE
RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
RISC-V: KVM: Remove second semicolon
KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
Documentation: kvm/sev: separate description of firmware
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
...
The SVE register sets have two different formats, one of which is a wrapped
version of the standard FPSIMD register set and another with actual SVE
register data. At present we check TIF_SVE to see if full SVE register
state should be provided when reading the SVE regset but if we were in a
syscall we may have saved only floating point registers even though that is
set.
Fix this and simplify the logic by checking and using the format which we
recorded when deciding if we should use FPSIMD or SVE format.
Fixes: 8c845e2731 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Cc: <stable@vger.kernel.org> # 6.2.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240325-arm64-ptrace-fp-type-v1-1-8dc846caf11f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
can1_lpcg: clock-controller@5ace0000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>, // 1 4
<&dma_ipg_clk>; // 2 5
clock-indices = <IMX_LPCG_CLK_0>,
<IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver
&flexcan2 {
clocks = <&can1_lpcg 1>, <&can1_lpcg 0>;
^^ ^^
Should be:
clocks = <&can1_lpcg IMX_LPCG_CLK_4>, <&can1_lpcg IMX_LPCG_CLK_0>;
};
Arg0 is divided by 4 in lpcg driver. So flexcan get IMX_SC_PM_CLK_PER by
<&can1_lpcg 1> and <&can1_lpcg 0>. Although function work, code logic is
wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org
Fixes: be85831de0 ("arm64: dts: imx8qm: add can node in devicetree")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
adma_pwm_lpcg: clock-controller@5a590000 {
... col1 col2
clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
adma_pwm: pwm@5a190000 {
...
clocks = <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>;
^^ ^^
Should be
clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
<&adma_pwm_lpcg IMX_LPCG_CLK_0>;
};
Arg0 will be divided by 4 in lcpg driver, so pwm will get IMX_SC_PM_CLK_PER
by <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>. Although function can work, code
logic is wrong. Fix it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: f1d6a6b991 ("arm64: dts: imx8qxp: add adma_pwm in adma")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 {
... // Col1 Col2
clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4
<&lsio_bus_clk>, // 3 5
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
<IMX_LPCG_CLK_6>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
pwm1 {
....
clocks = <&pwm1_lpcg 4>, <&pwm1_lpcg 1>;
^^ ^^
should be:
clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, <&pwm1_lpcg IMX_LPCG_CLK_1>;
};
Arg0 is divided by 4 in lpcg driver, so index 0 and 1 will be get by pwm
driver, which are same as IMX_LPCG_CLK_6 and IMX_LPCG_CLK_1. Even it can
work, but code logic is wrong. Fixed it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: 23fa99b205 ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Binding doesn't specify "reset-names" property and Linux driver also
doesn't use it.
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: thermal@1100b000: Unevaluated properties are not allowed ('reset-names' was unexpected)
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-5-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: ethernet@1b100000: compatible: ['mediatek,mt7622-eth', 'mediatek,mt2701-eth', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
(and other complains about wrong clocks).
Fixes: 5f599b3a0b ("arm64: dts: mt7622: add ethernet device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-4-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so update the minimum voltage constraint from 600000 uV to
500000 uV as listed on the mt6366 datasheet.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-5-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>