For foreground GC, we cache node blocks in victim section and set them
dirty, then we call sync_node_pages to flush these node pages, but
meanwhile, those node pages which does not locate in victim section
will be flushed together, so more bandwidth and continuous free space
would be occupied.
So for this condition, it's better to leave those unrelated node page
in cache for further write hit, and let CP or VM to flush them afterward.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits the existing sync_node_pages into (f)sync_node_pages.
The fsync_node_pages is used for f2fs_sync_file only.
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a new help f2fs_update_data_blkaddr to clean up redundant codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For now, flow of GCing an encrypted data page:
1) try to grab meta page in meta inode's mapping with index of old block
address of that data page
2) load data of ciphertext into meta page
3) allocate new block address
4) write the meta page into new block address
5) update block address pointer in direct node page.
Other reader/writer will use f2fs_wait_on_encrypted_page_writeback to
check and wait on GCed encrypted data cached in meta page writebacked
in order to avoid inconsistence among data page cache, meta page cache
and data on-disk when updating.
However, we will use new block address updated in step 5) as an index to
lookup meta page in inner bio buffer. That would be wrong, and we will
never find the GCing meta page, since we use the old block address as
index of that page in step 1).
This patch fixes the issue by adjust the order of step 1) and step 3),
and in step 1) grab page with index generated in step 3).
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With a partition which was formated as multi segments in one section,
we stated incorrectly for count of gc operation.
e.g., for a partition with segs_per_sec = 4
cat /sys/kernel/debug/f2fs/status
GC calls: 208 (BG: 7)
- data segments : 104 (52)
- node segments : 104 (24)
GC called count should be (104 (data segs) + 104 (node segs)) / 4 = 52,
rather than 208. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids to remain inefficient victim segment number selected by
a victim.
For example, if all the dirty segments has same valid blocks, we can get
the victim segments descending order due to keeping wrong last segment number.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are redundant pointer conversion in following call stack:
- at position a, inode was been converted to f2fs_file_info.
- at position b, f2fs_file_info was been converted to inode again.
- truncate_blocks(inode,..)
- fi = F2FS_I(inode) ---a
- ADDRS_PER_PAGE(node_page, fi)
- addrs_per_inode(fi)
- inode = &fi->vfs_inode ---b
- f2fs_has_inline_xattr(inode)
- fi = F2FS_I(inode)
- is_inode_flag_set(fi,..)
In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and
addrs_per_inode to acept parameter with type of inode pointer.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
variable nsearched in get_victim_by_default() indicates the number of
dirty segments we already checked. There are 2 problems about the way
it updates:
1. When p.ofs_unit is greater than 1, the victim we find consists
of multiple segments, possibly more than 1 dirty segment.
But nsearched always increases by 1.
2. If segments have been found but not been chosen, nsearched won't
increase. So even we have checked all dirty segments, nsearched
may still less than p.max_search.
All these problems could cause unnecessary search after all dirty
segments have already been checked.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In write_begin, if storage supports stable_page, we don't need to wait for
writeback to update its contents.
This patch introduces to use wait_for_stable_page instead of
wait_on_page_writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we configure section consist of multiple segments, foreground GC will
do the garbage collection with following approach:
for each segment in victim section
blk_start_plug
for each valid block in segment
write out by OPU method
submit bio cache <---
blk_finish_plug <---
There are two issue:
1) for most of the time, 'submit bio cache' will break the merging in
current bio buffer from writes of next segments, making a smaller bio
submitting.
2) block plug only cover IO submitting in one segment, which reduce
opportunity of merging IOs in plug with multiple segments.
So refactor the code as below structure to strive for biggest
opportunity of merging IOs:
blk_start_plug
for each segment in victim section
for each valid block in segment
write out by OPU method
submit bio cache
blk_finish_plug
Test method:
1. mkfs.f2fs -s 8 /dev/sdX
2. touch 32 files
3. write 2M data into each file
4. punch 1.5M data from offset 0 for each file
5. trigger foreground gc through ioctl
Before patch, there are totoally 40 bios submitted.
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 65536, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 65776, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 66016, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 66256, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 66496, size = 32768
----repeat for 8 times
After patch, there are totally 35 bios submitted.
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 65536, size = 122880
----repeat 34 times
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 73696, size = 16384
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The scenario is:
1. create lots of node blocks
2. sync
3. write lots of inline_data
-> got panic due to no free space
In that case, we should flush node blocks when writing inline_data in #3,
and trigger gc as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds last time that user requested filesystem operations.
This information is used to detect whether system is idle or not later.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sometimes we keep dumb when IO error occur in lower layer device, so user
will not receive any error return value for some operation, but actually,
the operation did not succeed.
This sould be avoided, so this patch reports such kind of error to user.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use sbi->blocks_per_seg directly to avoid unnecessary calculation when using
1 << sbi->log_blocks_per_seg.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Once f2fs_gc is done, wait_ms is changed once more.
So, its tracepoint would be located after it.
Reported-by: He YunLei <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
different competitors
Since we use different page cache (normally inode's page cache for R/W
and meta inode's page cache for GC) to cache the same physical block
which is belong to an encrypted inode. Writeback of these two page
cache should be exclusive, but now we didn't handle writeback state
well, so there may be potential racing problem:
a)
kworker: f2fs_gc:
- f2fs_write_data_pages
- f2fs_write_data_page
- do_write_data_page
- write_data_page
- f2fs_submit_page_mbio
(page#1 in inode's page cache was queued
in f2fs bio cache, and be ready to write
to new blkaddr)
- gc_data_segment
- move_encrypted_block
- pagecache_get_page
(page#2 in meta inode's page cache
was cached with the invalid datas
of physical block located in new
blkaddr)
- f2fs_submit_page_mbio
(page#1 was submitted, later, page#2
with invalid data will be submitted)
b)
f2fs_gc:
- gc_data_segment
- move_encrypted_block
- f2fs_submit_page_mbio
(page#1 in meta inode's page cache was
queued in f2fs bio cache, and be ready
to write to new blkaddr)
user thread:
- f2fs_write_begin
- f2fs_submit_page_bio
(we submit the request to block layer
to update page#2 in inode's page cache
with physical block located in new
blkaddr, so here we may read gabbage
data from new blkaddr since GC hasn't
writebacked the page#1 yet)
This patch fixes above potential racing problem for encrypted inode.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, we use ra_meta_pages to reads continuous physical blocks as much as
possible to improve performance of following reads. However, ra_meta_pages
uses a synchronous readahead approach by submitting bio with READ, as READ
is with high priority, it can not be used in the case of preloading blocks,
and it's not sure when these RAed pages will be used.
This patch supports asynchronous readahead in ra_meta_pages by tagging bio
with READA flag in order to allow preloading.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For normal inodes, their pages are allocated with __GFP_FS, which can cause
filesystem calls when reclaiming memory.
This can incur a dead lock condition accordingly.
So, this patch addresses this problem by introducing
f2fs_grab_cache_page(.., bool for_write), which calls
grab_cache_page_write_begin() with AOP_FLAG_NOFS.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a tracepoint to monitor background gc behaviors.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch drops in batches gc triggered through ioctl, since user
can easily control the gc by designing the loop around the ->ioctl.
We support synchronous gc by forcing using FG_GC in f2fs_gc, so with
it, user can make sure that in this round all blocks gced were
persistent in the device until ioctl returned.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When searching victim during gc, if there are no dirty segments in
filesystem, we will still take the time to search the whole dirty segment
map, it's not needed, it's better to skip in this condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When doing gc, we search a victim in dirty map, starting from position of
last victim, we will reset the current searching position until we touch
the end of dirty map, and then search the whole diryt map. So sometimes we
will search the range [victim, last] twice, it's redundant, this patch
avoids this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we do not call get_victim first, we cannot get a new victim for retrial
path.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to maintain the right section count freed in garbage
collecting when triggering a foreground gc.
Besides, when a foreground gc is running on current selected section, once
we fail to gc one segment, it's better to abandon gcing the left segments
in current section, because anyway we will select next victim for
foreground gc, so gc on the left segments in previous section will become
overhead and also cause the long latency for caller.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If FG_GC failed to reclaim one section, let's retry with another section
from the start, since we can get anoterh good candidate.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If node blocks were already moved, we don't need to move them again.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should avoid needless checkpoints when there is no dirty and prefree segment.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
That encrypted page is used temporarily, so we don't need to mark it accessed.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This makes the function check_dnode have a return type of bool
due to this particular function only ever returning either one
or zero as its return value and changes the name of the function
to is_alive in order to better explain this function's intended
work of checking if a dnode is still in use by the filesystem.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
[Jaegeuk Kim: change the return value check for the renamed function]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds encryption support in read and write paths.
Note that, in f2fs, we need to consider cleaning operation.
In cleaning procedure, we must avoid encrypting and decrypting written blocks.
So, this patch implements move_encrypted_block().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits find_data_page as follows.
1. f2fs_gc
- use get_read_data_page() with read only
2. find_in_level
- use find_data_page without locked page
3. truncate_partial_page
- In the case cache_only mode, just drop cached page.
- Ohterwise, use get_lock_data_page() and guarantee to truncate
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch is for looking into gc performance of f2fs in detail.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: fix build errors]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds FASTBOOT flag into checkpoint as follows.
- CP_UMOUNT_FLAG is set when system is umounted.
- CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries
was done.
So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly.
Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use pointer parameter @wait to pass result in {in,de}create_sleep_time for
cleanup.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
No modification in functionality, just clean codes with f2fs_radix_tree_insert.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two slab cache inode_entry_slab and winode_slab using the same
structure as below:
struct dir_inode_entry {
struct list_head list; /* list head */
struct inode *inode; /* vfs inode pointer */
};
struct inode_entry {
struct list_head list;
struct inode *inode;
};
It's a little waste that the two cache can not share their memory space for each
other.
So in this patch we remove one redundant winode_slab slab cache, then use more
universal name struct inode_entry as remaining data structure name of slab,
finally we reuse the inode_entry_slab to store dirty dir item and gc item for
more effective.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revists retrial paths in f2fs.
The basic idea is to use cond_resched instead of retrying from the very early
stage.
Suggested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to fix:
BUG: using smp_processor_id() in preemptible [00000000] code: f2fs_gc-254:0/384
(radix_tree_node_alloc+0x14/0x74) from [<c033d8a0>] (radix_tree_insert+0x110/0x200)
(radix_tree_insert+0x110/0x200) from [<c02e8264>] (gc_data_segment+0x340/0x52c)
(gc_data_segment+0x340/0x52c) from [<c02e8658>] (f2fs_gc+0x208/0x400)
(f2fs_gc+0x208/0x400) from [<c02e8a98>] (gc_thread_func+0x248/0x28c)
(gc_thread_func+0x248/0x28c) from [<c0139944>] (kthread+0xa0/0xac)
(kthread+0xa0/0xac) from [<c0105ef8>] (ret_from_fork+0x14/0x3c)
The reason is that f2fs calls radix_tree_insert under enabled preemption.
So, before calling it, we need to call radix_tree_preload.
Otherwise, we should use _GFP_WAIT for the radix tree, and use mutex or
semaphore to cover the radix tree operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there are many inodes that have data blocks in victim segment,
it takes long time to find a inode in gc_inode list.
Let's use radix_tree to reduce lookup time.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Little cleanup to distinguish each phase easily
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: modify indentation for code readability]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_remount, we will stop gc thread and set need_restart_gc as true when new
option is set without BG_GC, then if any error occurred in the following
procedure, we can restore to start the gc thread.
But after that, We will fail to restore gc thread in start_gc_thread as BG_GC is
not set in new option, so we'd better move this condition judgment out of
start_gc_thread to fix this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a system wants to reduce the booting time as a top priority, now we can
use a mount option, -o fastboot.
With this option, f2fs conducts a little bit slow write_checkpoint, but
it can avoid the node page reads during the next mount time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
