Commit Graph

21 Commits

Author SHA1 Message Date
Sudeep Holla
c2a25c141f drivers: firmware: psci: initialise idle states using ACPI LPI
This patch adds support for initialisation of PSCI CPUIdle states
from Low Power Idle(_LPI) entries in the ACPI tables when acpi is
enabled.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 23:29:38 +02:00
Linus Torvalds
4a5219edcd ARM: SoC driver updates for v4.7
Driver updates for ARM SoCs, these contain various things that touch
 the drivers/ directory but got merged through arm-soc for practical
 reasons. For the most part, this is now related to power management
 controllers, which have not yet been abstracted into a separate
 subsystem, and typically require some code in drivers/soc or arch/arm
 to control the power domains.
 
 Another large chunk here is a rework of the NVIDIA Tegra USB3.0
 support, which was surprisingly tricky and took a long time to
 get done.
 
 Finally, reset controller handling as always gets merged through here
 as well.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXkGCrR//JCVInAQKb5BAAv2HuJ/tDjC8nNfYi0/aIt4uaRfRWE84t
 +nIpdKl/pB9AQo+HdG9WNihHs2GN44PdQRrDZ1enQX8nvTzc+dUl0AI1GZmUDpF/
 zCV2UJ39HMZcEPwf8lZk9X/JP4VOkJDM5pDgNZnnqdvkq0oqtKzmh0Kt6m2g6fIS
 LR3FVtCRxJDeT+pT+EpoN4jpW0cb3mjTWbn/a8Ar3BH07KBA3U22MVJhHArLjS30
 /aXP+AkgdvlgmBher5z44N6Qd/KOLn78rnE4LCRC4FwSCqA+qqPJQNGNblV5MHjE
 s5CYTqlihqLiGapqJ4zGBhmqj0XU/3kFVboGqYlTGjzMkOFgjddTpMdfkBUoG5oJ
 UubJ51zzSLXTcMwILGNXVls4YjJRKwNH7jeSjuMqpWrAYP4qBcMn/HQ1GqUjkNv+
 yWkheHiLDYgYkIDOBDuFUtJ7OXiVumGGxIE+r2K/sXeNI7gFcDxFExMIo11vPAWP
 WJ8ydTchyb/RUQbzhjEXhoIeCZwXQfe9s11qsyFQDCZLleWYQGs3gFKdEI1E7+BE
 oe018BSP+uaVXdaV18Ne4smwzydLAU9/ieUoO45PAUSN2reV4lWhFTlNiiiMd3Id
 IWoYwpxqP2VW9zJvLz6QGF/P+3cZ00m/1lecJCKHHPBmbUijCHWJmgLT73AdSXmR
 YIJ2UM5QMiY=
 =x+iD
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, these contain various things that touch
  the drivers/ directory but got merged through arm-soc for practical
  reasons.

  For the most part, this is now related to power management
  controllers, which have not yet been abstracted into a separate
  subsystem, and typically require some code in drivers/soc or arch/arm
  to control the power domains.

  Another large chunk here is a rework of the NVIDIA Tegra USB3.0
  support, which was surprisingly tricky and took a long time to get
  done.

  Finally, reset controller handling as always gets merged through here
  as well"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  arm-ccn: Enable building as module
  soc/tegra: pmc: Add generic PM domain support
  usb: xhci: tegra: Add Tegra210 support
  usb: xhci: Add NVIDIA Tegra XUSB controller driver
  dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support
  dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding
  PCI: tegra: Support per-lane PHYs
  dt-bindings: pci: tegra: Update for per-lane PHYs
  phy: tegra: Add Tegra210 support
  phy: Add Tegra XUSB pad controller support
  dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
  dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
  phy: core: Allow children node to be overridden
  clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
  drivers: firmware: psci: make two helper functions inline
  soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
  soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
  soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
  ...
2016-05-18 13:14:02 -07:00
Rafael J. Wysocki
acc53b49b1 Merge branch 'pm-cpuidle'
* pm-cpuidle:
  cpuidle: Replace ktime_get() with local_clock()
  drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops
  soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops
  ARM: cpuidle: constify return value of arm_cpuidle_get_ops()
  ARM: cpuidle: add const qualifier to cpuidle_ops member in structures
  intel_idle: add BXT support
  cpuidle: Indicate when a device has been unregistered
2016-05-16 14:31:03 +02:00
Sudeep Holla
978fa43623 drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems
Currently ARM CPUs DT bindings allows different enable-method value for
PSCI based systems. On ARM 64-bit this property is required and must be
"psci" while on ARM 32-bit systems this property is optional and must
be "arm,psci" if present.

However, "arm,psci" has always been the compatible string for the PSCI
node, and was never intended to be the enable-method. So this is a bug
in the binding and not a deliberate attempt at specifying 32-bit
differently.

This is problematic if 32-bit OS is run on 64-bit system which has
"psci" as enable-method rather than the expected "arm,psci".

So let's unify the value into "psci" and remove support for "arm,psci"
before it finds any users.

Reported-by: Soby Mathew <Soby.Mathew@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-26 12:46:08 +02:00
Arnd Bergmann
2b9cf18982 drivers: firmware: psci: make two helper functions inline
The previous patch marked these two as 'static' which showed that they
are sometimes unused:

drivers/firmware/psci.c:103:13: error: 'psci_power_state_is_valid' defined but not used [-Werror=unused-function]
 static bool psci_power_state_is_valid(u32 state)
drivers/firmware/psci.c:94:13: error: 'psci_power_state_loses_context' defined but not used [-Werror=unused-function]
 static bool psci_power_state_loses_context(u32 state)

This also marks the functions 'inline', which has the main effect of
silently ignoring them when they are unused. The compiler will typically
inline small static functions anyway, so this seems more appropriate
than using __maybe_unused, which would have the same result otherwise.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 21e8868 ("drivers: firmware: psci: make two helper functions static")
2016-04-26 02:13:30 +02:00
Jisheng Zhang
21e8868e66 drivers: firmware: psci: make two helper functions static
psci_power_state_loses_context() and psci_power_state_is_valid are only
used internally now, so make them static.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25 23:47:44 +02:00
Jisheng Zhang
1d2d8de44a drivers: firmware: psci: drop duplicate const from psci_of_match
This is to fix below sparse warning:
drivers/firmware/psci.c:mmm:nn: warning: duplicate const

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25 23:47:36 +02:00
Jisheng Zhang
5e7c17df79 drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops
The psci_cpuidle_ops structures is not over-written, so add "const"
qualifier and replace __initdata with __initconst.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-04-20 10:44:32 +02:00
Lorenzo Pieralisi
8b6f2499ac ARM: 8511/1: ARM64: kernel: PSCI: move PSCI idle management code to drivers/firmware
ARM64 PSCI kernel interfaces that initialize idle states and implement
the suspend API to enter them are generic and can be shared with the
ARM architecture.

To achieve that goal, this patch moves ARM64 PSCI idle management
code to drivers/firmware, so that the interface to initialize and
enter idle states can actually be shared by ARM and ARM64 arches
back-ends.

The ARM generic CPUidle implementation also requires the definition of
a cpuidle_ops section entry for the kernel to initialize the CPUidle
operations at boot based on the enable-method (ie ARM64 has the
statically initialized cpu_ops counterparts for that purpose); therefore
this patch also adds the required section entry on CONFIG_ARM for PSCI so
that the kernel can initialize the PSCI CPUidle back-end when PSCI is
the probed enable-method.

On ARM64 this patch provides no functional change.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arch/arm64]
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-11 15:33:38 +00:00
Jens Wiklander
e679660dbb ARM: 8481/2: drivers: psci: replace psci firmware calls
Switch to use a generic interface for issuing SMC/HVC based on ARM SMC
Calling Convention. Removes now the now unused psci-call.S.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-04 16:24:45 +00:00
Lorenzo Pieralisi
79b04beb1e drivers: psci: make PSCI 1.0 functions initialization version dependent
The PSCI specifications [1] and the SMC calling convention mandate
that unimplemented functions ids must return NOT_SUPPORTED (0xffffffff)
if a function id is called but it is not implemented.

Consequently, PSCI 1.0 function ids that require the 1.0 PSCI_FEATURES
call to be initialized:

CPU_SUSPEND (psci_init_cpu_suspend())
SYSTEM_SUSPEND (psci_init_system_suspend())

call the PSCI_FEATURES function id independently of the detected
PSCI firmware version, since, if the PSCI_FEATURES function id is not
implemented, it must return NOT_SUPPORTED according to the PSCI
specifications, causing the initialization functions to fail as expected.

Some existing PSCI implementations (ie Qemu PSCI emulation), do not
comply with the SMC calling convention and fail if function ids that are
not implemented are called from the OS, causing boot failures.

To solve this issue, this patch adds code that checks the PSCI firmware
version before calling PSCI 1.0 initialization functions so that the
OS makes sure that it is calling 1.0 functions only if the firmware
version detected is 1.0 or greater, therefore avoiding PSCI calls
that are bound to fail and might cause system boot failures owing
to non-compliant PSCI firmware implementations.

[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kevin Hilman <khilman@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23 09:56:00 -07:00
Sudeep Holla
faf7ec4a92 drivers: firmware: psci: add system suspend support
PSCI v1.0 introduces a new API called PSCI_SYSTEM_SUSPEND. This API
provides the mechanism by which the calling OS can request entry into
the deepest possible system sleep state.

It meets all the necessary preconditions for entering suspend to RAM
state in Linux. This patch adds support for PSCI_SYSTEM_SUSPEND in psci
firmware and registers a psci system suspend operation to implement the
suspend-to-RAM(s2r) in a generic way on all the platforms implementing
PSCI.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-10-02 14:35:17 +01:00
Sudeep Holla
029180b1c9 drivers: firmware: psci: define more generic PSCI_FN_NATIVE macro
This patch replaces the definition and usage of PSCI_0_2_FN_NATIVE with
the new and more generic macro PSCI_FN_NATIVE that can be used with any
version. This will be useful for the new features introduced in PSCIv1.0
and for any future revisions.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-10-02 14:35:17 +01:00
Lorenzo Pieralisi
0fc197c7cb drivers: firmware: psci: add PSCI v1.0 DT bindings
PSCI 1.0 is designed to be fully compliant to the PSCI 0.2
specification, with minor differences that are described in the
PSCI specification.

In particular, PSCI v1.0 augments the specification with a new
power_state format (extended stateid - probeable through the
PSCI_FEATURES call), changes some function return codes and
functions usage requirements wrt PSCI 0.2. These changes mean
that 1.0 vs 0.2 compliancy should be enforced through a DT
compatible string that allows firmware to specify 1.0 only
compliancy so that older kernels are prevented from using
PSCI 1.0 FW implementations in a non-compatible way (eg by
calling a 1.0 FW implementation and expecting 0.2 behaviour).

This patch adds PSCI 1.0 DT bindings and related compatible
string.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
2015-10-02 14:35:17 +01:00
Lorenzo Pieralisi
a5c00bb28d drivers: firmware: psci: add extended stateid power_state support
PSCI v1.0 augmented the power_state parameter format specification
(extended stateid) and introduced a way to probe it through the
PSCI_FEATURES interface.

This patch implements code that detects the power_state format at
run-time through the PSCI_FEATURES interface, so that the power_state
argument can be properly detected and validated in the kernel according
to the information provided through firmware.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
2015-10-02 14:35:17 +01:00
Lorenzo Pieralisi
5f004e0c9f drivers: firmware: psci: add PSCI_FEATURES call
PSCI v1.0 introduces a PSCI_FEATURES call that allows to probe for
features related to a specific function identifier.

This patch adds PSCI_FEATURES support to the PSCI firmware layer.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
2015-10-02 14:35:16 +01:00
Lorenzo Pieralisi
068654c200 drivers: firmware: psci: move power_state handling to generic code
Functions implemented on arm64 to check if a power_state parameter
is valid and if the power_state implies context loss are not
arm64 specific and should be moved to generic code so that they
can be reused on arm systems too.

This patch moves the functions handling the power_state parameter
to generic PSCI firmware layer code.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
2015-10-02 14:35:16 +01:00
Lorenzo Pieralisi
2217d7c68e drivers: firmware: psci: add INVALID_ADDRESS return value
PSCI 1.0 introduces the INVALID_ADDRESS return value for functions
that take an address as input parameter (eg CPU_SUSPEND).

This patch adds INVALID_ADDRESS return value to kernel code and
updates the PSCI to linux error conversion to take it into account.

The kernel error value associated to INVALID_ADDRESS is set to
the error returned when the PSCI error code is INVALID_PARAMETERS
to comply with current call sites expected return value, given
that the kernel at present has no use for the additional error
information reported.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
2015-10-02 14:35:16 +01:00
Linus Torvalds
c706c7eb0d Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM development updates from Russell King:
 "Included in this update:

   - moving PSCI code from ARM64/ARM to drivers/

   - removal of some architecture internals from global kernel view

   - addition of software based "privileged no access" support using the
     old domains register to turn off the ability for kernel
     loads/stores to access userspace.  Only the proper accessors will
     be usable.

   - addition of early fixup support for early console

   - re-addition (and reimplementation) of OMAP special interconnect
     barrier

   - removal of finish_arch_switch()

   - only expose cpuX/online in sysfs if hotpluggable

   - a number of code cleanups"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits)
  ARM: software-based priviledged-no-access support
  ARM: entry: provide uaccess assembly macro hooks
  ARM: entry: get rid of multiple macro definitions
  ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die()
  ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore()
  ARM: mm: improve do_ldrd_abort macro
  ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit()
  ARM: entry: efficiency cleanups
  ARM: entry: get rid of asm_trace_hardirqs_on_cond
  ARM: uaccess: simplify user access assembly
  ARM: domains: remove DOMAIN_TABLE
  ARM: domains: keep vectors in separate domain
  ARM: domains: get rid of manager mode for user domain
  ARM: domains: move initial domain setting value to asm/domains.h
  ARM: domains: provide domain_mask()
  ARM: domains: switch to keeping domain value in register
  ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE
  ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD()
  ARM: 8416/1: Feroceon: use of_iomap() to map register base
  ARM: 8415/1: early fixmap support for earlycon
  ...
2015-09-03 16:27:01 -07:00
Mark Rutland
5211df00a4 drivers: psci: support native SMC{32,64} calls
A 32-bit OS cannot make calls with SMC64 IDs, while a 64-bit OS must
invoke some PSCI functions with SMC64 IDs.

This patch introduces and makes use of a new macro to choose the
appropriate IDs based on the register width of the OS, which will allow
32-bit callers to use the PSCI client code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-08-03 12:35:00 +01:00
Mark Rutland
bff60792f9 arm64: psci: factor invocation code to drivers
To enable sharing with arm, move the core PSCI framework code to
drivers/firmware. This results in a minor gain in lines of code, but
this will quickly be amortised by the removal of code currently
duplicated in arch/arm.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-08-03 12:33:39 +01:00