Merge amdgpu_dm_display_resume function into dm_resume,
as it is not called anywhere else anymore.
Initially the call was broken down into 2 functions for cursor corruption
issue. Now the issue is not visible, hence the dm_resume will perform
dm_display_resume in it.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lock irq table when reading a work in queue,
unlock to flush the work, lock again till all tasks
are cleared
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After host os reset gpu reset, need to set flag in_gpu_reset to
zero.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When put the IB test out of exclusive mode, and do sriov reset,
the IB test will randomly fail. As out of exclusive mode it uses
kiq to do read and write registers, but as it has world switch,
the kiq read and write time will be random, sometimes it will
beyond the MAX_KIQ_REG_WAIT and then the read or write register
will fail, which will result the IB test fail.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current sequence in scheduler thread is:
1. update last sched fence
2. job begin (adding to mirror list)
3. job finish (remove from mirror list)
4. back to 1
Since we update last sched prior to joining mirror list, the jobs
in mirror list already pass the last sched fence. TDR just run
the jobs in mirror list, so we should not update the last sched
fences in TDR.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VEGAM specific changes for smu7:
1. add avfs control.
2. add a smc message defferent as smu7.
3. don't switch mc arb memory timing.
4. update LCAC_MC0/1_CNTL value.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smumgr handles communication between the driver
and the SMU for power management.
v2: fix typo (Alex)
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functionality to fetch gpio table from vbios.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
used for calculating memory clocks in powerplay.
v2: handle endian swapping of atom data (Alex)
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some eDP displays use the extra link rate table to advertise link rate
support. If they do that they don't need to provide link rate through
the usual registers. Since we don't currently have support for the extra
link rate table default to HBR2 for the display in this.
Note that this is a HACK. Ultimately we need to teach DC to use the
extra link rate table.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add CHIP_VEGAM
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement device IDs for VEGAM
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: use proper register rather than hardcoding.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Directly loaded by VBIOS
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AGP mode is unstable on PowerPC. Symptoms are generally of the form:
[ 1228.795711] radeon 0000:00:10.0: ring 0 stalled for more than 10240msec
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when bit14 in module parameter ppfeaturemask was set.
od feature will be enabled on Vega10 except vbios not support.
user can read od range by reading sysfs pp_od_clk_voltage,
cat pp_od_clk_voltage
OD_SCLK:
0: 852Mhz 800mV
1: 991Mhz 900mV
2: 1138Mhz 950mV
3: 1269Mhz 1000mV
4: 1348Mhz 1050mV
5: 1399Mhz 1100mV
6: 1440Mhz 1150mV
7: 1500Mhz 1200mV
OD_MCLK:
0: 167Mhz 800mV
1: 500Mhz 800mV
2: 800Mhz 950mV
3: 945Mhz 1000mV
OD_RANGE:
SCLK: 852MHz 2200MHz
MCLK: 167MHz 1500MHz
VDDC: 800mV 1200mV
and can configure the clock/voltage by writing pp_od_clk_voltage
for example:
echo "s 0 900 820">pp_od_clk_voltage to change the sclk/vddc
to 900MHz and 820 mV in dpm level0.
echo "r" to change the clk/voltage to default value.
echo "c">pp_od_clk_voltage
to commit the change
v2: squash in warning fix (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The method struct vga_switcheroo_handler::get_client_id() is defined
as returning an 'enum vga_switcheroo_client_id' but the implementation
in this driver, radeon_atpx_get_client_id(), returns an 'int'.
Fix this by returning 'enum vga_switcheroo_client_id' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The method struct vga_switcheroo_handler::get_client_id() is defined
as returning an 'enum vga_switcheroo_client_id' but the implementation
in this driver, amdgpu_atpx_get_client_id(), returns an 'int'.
Fix this by returning 'enum vga_switcheroo_client_id' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. support more than 8 values when setting get_pp_dpm_mclk/
sclk/pcie, the former design just parse command format like
"echo xxxx > pp_dpm_sclk" and current can parse "echo xx xxx
xxxx > pp_dpm_sclk" whose operation is more user-friendly
and convinent and can offer more values;
2. be compatible with former design like "xx".
3. add DOC: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
Bug:KFD-385
Signed-off-by: welu <wei.lu2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, the SQ may skip some of the register writes, or shader waves may
be allocated where we don't expect them, so that as a result we don't actually
reset all of the register SRAMs. This can lead to spurious ECC errors later on
if a shader uses an uninitialized register.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Enables sg display if vram size <= THRESHOLD(256M); otherwise
still use vram as display buffer.
This patch fixed some potention issues introduced by change
"allow framebuffer in GART memory as well" due to CZ/ST hardware
limitation.
v2: Change default setting to auto.
v3: Move some logic from amdgpu_display_framebuffer_domains()
to pin function, suggested by Christian.
v4: Split into several patches.
v5: Drop module parameter for now.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set query to the power value so we actually return it. Fixes
no power value returned on asics with the new query.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when user cat pp_od_clk_voltage
add display info about the sclk/mclk/vddc range that user can overdrive
output as:
OD_SCLK:
0: 300MHz 900mV
1: 400MHz 912mV
2: 500MHz 925mV
3: 600MHz 937mV
4: 700MHz 950mV
5: 800MHz 975mV
6: 900MHz 987mV
7: 1000MHz 1000mV
OD_MCLK:
0: 300MHz 900mV
1: 1500MHz 912mV
OD_RANGE:
SCLK: 300MHz 1200MHz
MCLK: 300MHz 1500MHz
VDDC: 700mV 1200mV
also
1. remove unnecessary whitespace before a quoted newline
2. change unit of frequency Mhz to MHz
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
read vddc range from vbios.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
