Change the digest fields in struct dm_verity_io from variable-length to
fixed-length, since their maximum length is fixed at
HASH_MAX_DIGESTSIZE, i.e. 64 bytes, which is not too big. This is
simpler and makes the fields a bit faster to access.
(HASH_MAX_DIGESTSIZE did not exist when this code was written, which may
explain why it wasn't used.)
This makes the verity_io_real_digest() and verity_io_want_digest()
functions trivial, but this patch leaves them in place temporarily since
most of their callers will go away in a later patch anyway.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Move the code that handles mismatches of data block hashes into its own
function so that it doesn't clutter up verity_verify_io().
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Move the code that sets up the hash transformation into its own
function. No change in behavior.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_parse_device_entry() simply copies the minor number into dmi.dev, but
the dev_t format splits the minor number between the lowest 8 bytes and
highest 12 bytes. If the minor number is larger than 255, part of it
will end up getting treated as the major number
Fix this by checking that the minor number is valid and then encoding it
as a dev_t.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
'thunk' has been unused since commit f177940a80 ("dm cache metadata:
switch to using the new cursor api for loading metadata").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The only difference between the code to setup and dispatch the io in
sync_io() and async_io() is the sync argument to dispatch_io(), which
is used to update the opf argument.
Update the opf argument direcly in sync_io(), and remove the sync
argument from dispatch_io(). Then, make sync_io() call async_io()
instead of duplicting all of its code.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If dm_io() returned an error, callers that set a notify.fn and wanted it
called on an error need to check the return value and call notify.fn
themselves if it was -EINVAL but not if it was -EIO. None of them do
this (granted, all the existing async_io users of dm_io call it in a way
that is guaranteed to not return an error).
Simplify the interface by never calling the notify.fn if dm_io returns
an error. This works with the existing dm_io callers which check for an
error and handle it using the same methods as the notify.fn.
This also allows us to move the now equivalent num_regions checks out of
sync_io() and async_io() and into dm_io() itself. Additionally, change
async_io() into a void function, since it can no longer fail.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If dp->get_page() returns a non-zero offset, the bio might need an
additional bvec to deal with the offset. For example, if remaining is
exactly one page size, but there is an offset, the memory will span
two pages.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Device mapper sends flush bios to all the targets and the targets send it
to the underlying device. That may be inefficient, for example if a table
contains 10 linear targets pointing to the same physical device, then
device mapper would send 10 flush bios to that device - despite the fact
that only one bio would be sufficient.
This commit optimizes the flush behavior. It introduces a per-target
variable flush_bypasses_map - it is set when the target supports flush
optimization - currently, the dm-linear and dm-stripe targets support it.
When all the targets in a table have flush_bypasses_map,
flush_bypasses_map on the table is set. __send_empty_flush tests if the
table has flush_bypasses_map - and if it has, no flush bios are sent to
the targets via the "map" method and the list dm_table->devices is
iterated and the flush bios are sent to each member of the list.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Suggested-by: Yang Yang <yang.yang@vivo.com>
The purpose of the chunk_sectors limit is to ensure that a mergeble request
fits within the boundary of the chunck_sector value.
Such a feature will be useful for other request_queue boundary limits, so
generalize the chunk_sectors merge code.
This idea was proposed by Hannes Reinecke.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in queue limits cleanups.
* for-6.11/block-limits:
block: move the raid_partial_stripes_expensive flag into the features field
block: remove the discard_alignment flag
block: move the misaligned flag into the features field
block: renumber and rename the cache disabled flag
block: fix spelling and grammar for in writeback_cache_control.rst
block: remove the unused blk_bounce enum
Move the raid_partial_stripes_expensive flags into the features field to
reclaim a little bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
queue_limits.discard_alignment is never read except in the places
where it is stacked into another limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in last round of queue limits changes from Christoph.
* for-6.11/block-limits: (26 commits)
block: move the bounce flag into the features field
block: move the skip_tagset_quiesce flag to queue_limits
block: move the pci_p2pdma flag to queue_limits
block: move the zone_resetall flag to queue_limits
block: move the zoned flag into the features field
block: move the poll flag to queue_limits
block: move the dax flag to queue_limits
block: move the nowait flag to queue_limits
block: move the synchronous flag to queue_limits
block: move the stable_writes flag to queue_limits
block: move the io_stat flag setting to queue_limits
block: move the add_random flag to queue_limits
block: move the nonrot flag to queue_limits
block: move cache control settings out of queue->flags
block: remove blk_flush_policy
block: freeze the queue in queue_attr_store
nbd: move setting the cache control flags to __nbd_set_size
virtio_blk: remove virtblk_update_cache_mode
loop: fold loop_update_rotational into loop_reconfigure_limits
loop: also use the default block size from an underlying block device
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the zoned flags into the features field to reclaim a little
bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the poll flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the dax flag into the queue_limits feature field so that it can be
set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the nowait flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the stable_writes flag into the queue_limits feature field so that
it can be set atomically with the queue frozen.
The flag is now inherited by blk_stack_limits, which greatly simplifies
the code in dm, and fixed md which previously did not pass on the flag
set on lower devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the io_stat flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Simplify md and dm to set the flag unconditionally instead of avoiding
setting a simple flag for cases where it already is set by other means,
which is a bit pointless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the add_random flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Note that this also removes code from dm to clear the flag based on
the underlying devices, which can't be reached as dm devices will
always start out without the flag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the nonrot flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Use the chance to switch to defaulting to non-rotational and require
the driver to opt into rotational, which matches the polarity of the
sysfs interface.
For the z2ram, ps3vram, 2x memstick, ubiblock and dcssblk the new
rotational flag is not set as they clearly are not rotational despite
this being a behavior change. There are some other drivers that
unconditionally set the rotational flag to keep the existing behavior
as they arguably can be used on rotational devices even if that is
probably not their main use today (e.g. virtio_blk and drbd).
The flag is automatically inherited in blk_stack_limits matching the
existing behavior in dm and md.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the cache control settings into the queue_limits so that the flags
can be set atomically with the device queue frozen.
Add new features and flags field for the driver set flags, and internal
(usually sysfs-controlled) flags in the block layer. Note that we'll
eventually remove enough field from queue_limits to bring it back to the
previous size.
The disable flag is inverted compared to the previous meaning, which
means it now survives a rescan, similar to the max_sectors and
max_discard_sectors user limits.
The FLUSH and FUA flags are now inherited by blk_stack_limits, which
simplified the code in dm a lot, but also causes a slight behavior
change in that dm-switch and dm-unstripe now advertise a write cache
despite setting num_flush_bios to 0. The I/O path will handle this
gracefully, but as far as I can tell the lack of num_flush_bios
and thus flush support is a pre-existing data integrity bug in those
targets that really needs fixing, after which a non-zero num_flush_bios
should be required in dm for targets that map to underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the switch to using the zone append emulation of the block layer
zone write plugging, the macro DM_ZONE_INVALID_WP_OFST is no longer used
in dm-zone.c. Remove its definition.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240611023639.89277-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The generic stacking of limits implemented in the block layer cannot
correctly handle stacking of zone resource limits (max open zones and
max active zones) because these limits are for an entire device but the
stacking may be for a portion of that device (e.g. a dm-linear target
that does not cover an entire block device). As a result, when DM
devices are created on top of zoned block devices, the DM device never
has any zone resource limits advertized, which is only correct if all
underlying target devices also have no zone resource limits.
If at least one target device has resource limits, the user may see
either performance issues (if the max open zone limit of the device is
exceeded) or write I/O errors if the max active zone limit of one of
the underlying target devices is exceeded.
While it is very difficult to correctly and reliably stack zone resource
limits in general, cases where targets are not sharing zone resources of
the same device can be dealt with relatively easily. Such situation
happens when a target maps all sequential zones of a zoned block device:
for such mapping, other targets mapping other parts of the same zoned
block device can only contain conventional zones and thus will not
require any zone resource to correctly handle write operations.
For a mapped device constructed with such targets, which includes mapped
devices constructed with targets mapping entire zoned block devices, the
zone resource limits can be reliably determined using the non-zero
minimum of the zone resource limits of all targets.
For mapped devices that include targets partially mapping the set of
sequential write required zones of zoned block devices, instead of
advertizing no zone resource limits, it is also better to set the mapped
device limits to the non-zero minimum of the limits of all targets. In
this case the limits for a target depend on the number of sequential
zones being mapped: if this number of zone is larger than the limits,
then the limits of the device apply and can be used. If on the other
hand the target maps a number of zones smaller than the limits, then no
limits is needed and we can assume that the target has no limits (limits
set to 0).
This commit improves zone resource limits handling as described above
by modifying dm_set_zones_restrictions() to iterate the targets of a
mapped device to evaluate the max open and max active zone limits. This
relies on an internal "stacking" of the limits of the target devices
combined with a direct counting of the number of sequential zones
mapped by the targets.
1) For a target mapping an entire zoned block device, the limits for the
target are set to the limits of the device.
2) For a target partially mapping a zoned block device, the number of
mapped sequential zones is used to determine the limits: if the
target maps more sequential write required zones than the device
limits, then the limits of the device are used as-is. If the number
of mapped sequential zones is lower than the limits, then we assume
that the target has no limits (limits set to 0).
As this evaluation is done for each target, the zone resource limits
for the mapped device are evaluated as the non-zero minimum of the
limits of all the targets.
For configurations resulting in unreliable limits, i.e. a table
containing a target partially mapping a zoned device, a warning message
is issued.
The counting of mapped sequential zones for the target is done using the
new function dm_device_count_zones() which performs a report zones on
the entire block device with the callback dm_device_count_zones_cb().
This count of mapped sequential zones is also used to determine if the
mapped device contains only conventional zones. This allows simplifying
dm_set_zones_restrictions() to not do a report zones just for this.
For mapped devices mapping only conventional zones, as before, the
mapped device is changed to a regular device by setting its zoned limit
to false and clearing all its zone related limits.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240611023639.89277-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dm_revalidate_zones() is called from dm_set_zone_restrictions() when the
mapped device queue limits are not yet set. However,
dm_revalidate_zones() calls blk_revalidate_disk_zones() and this
function consults and modifies the mapped device queue limits. Thus,
currently, blk_revalidate_disk_zones() operates on limits that are not
yet initialized.
Fix this by moving the call to dm_revalidate_zones() out of
dm_set_zone_restrictions() and into dm_table_set_restrictions() after
executing queue_limits_set().
To further cleanup dm_set_zones_restrictions(), the message about the
type of zone append (native or emulated) is also moved inside
dm_revalidate_zones().
Fixes: 1c0e720228 ("dm: use queue_limits_set")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240611023639.89277-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in block limits branch, which exists as a shared branch for both
the block and SCSI tree.
* for-6.11/block-limits: (26 commits)
block: move integrity information into queue_limits
block: invert the BLK_INTEGRITY_{GENERATE,VERIFY} flags
block: bypass the STABLE_WRITES flag for protection information
block: don't require stable pages for non-PI metadata
block: use kstrtoul in flag_store
block: factor out flag_{store,show} helper for integrity
block: remove the blk_flush_integrity call in blk_integrity_unregister
block: remove the blk_integrity_profile structure
dm-integrity: use the nop integrity profile
md/raid1: don't free conf on raid0_run failure
md/raid0: don't free conf on raid0_run failure
block: initialize integrity buffer to zero before writing it to media
block: add special APIs for run-time disabling of discard and friends
block: remove unused queue limits API
sr: convert to the atomic queue limits API
sd: convert to the atomic queue limits API
sd: cleanup zoned queue limits initialization
sd: factor out a sd_discard_mode helper
sd: simplify the disable case in sd_config_discard
sd: add a sd_disable_write_same helper
...
Move the integrity information into the queue limits so that it can be
set atomically with other queue limits, and that the sysfs changes to
the read_verify and write_generate flags are properly synchronized.
This also allows to provide a more useful helper to stack the integrity
fields, although it still is separate from the main stacking function
as not all stackable devices want to inherit the integrity settings.
Even with that it greatly simplifies the code in md and dm.
Note that the integrity field is moved as-is into the queue limits.
While there are good arguments for removing the separate blk_integrity
structure, this would cause a lot of churn and might better be done at a
later time if desired. However the integrity field in the queue_limits
structure is now unconditional so that various ifdefs can be avoided or
replaced with IS_ENABLED(). Given that tiny size of it that seems like
a worthwhile trade off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block layer integrity configuration is a bit complex right now, as it
indirects through operation vectors for a simple two-dimensional
configuration:
a) the checksum type of none, ip checksum, crc, crc64
b) the presence or absence of a reference tag
Remove the integrity profile, and instead add a separate csum_type flag
which replaces the existing ip-checksum field and a new flag that
indicates the presence of the reference tag.
This removes up to two layers of indirect calls, remove the need to
offload the no-op verification of non-PI metadata to a workqueue and
generally simplifies the code. The downside is that block/t10-pi.c now
has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is
supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded
for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY
already, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The core md code calls the ->free method which already frees conf.
Fixes: 07f1a6850c ("md/raid1: fail run raid1 array when active disk less than one")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com
For different sync_action, sync_thread will use different max_sectors,
see details in md_sync_max_sectors(), currently both md_do_sync() and
pers->sync_request() in eatch iteration have to get the same
max_sectors. Hence pass in max_sectors for pers->sync_request() to
prevent redundant code.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-12-yukuai1@huaweicloud.com
Make code cleaner by replacing if else if with switch, and it's more
obvious now what is doing for each sync_action. There are no
functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-11-yukuai1@huaweicloud.com
The only difference is that "none" is removed and initial
last_sync_action will be idle.
On the one hand, this value is introduced by commit c4a3955145
("MD: Remember the last sync operation that was performed"), and the
usage described in commit message is not affected. On the other hand,
last_sync_action is not used in mdadm or mdmon, and none of the tests
that I can find.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-10-yukuai1@huaweicloud.com
Make code cleaner. and also use the action_name directly in kernel log:
- "check" instead of "data-check"
- "repair" instead of "requested-resync"
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-9-yukuai1@huaweicloud.com
MD_RECOVERY_RUNNING will always be set when trying to register a new
sync_thread, however, if md_start_sync() turns out to do nothing,
MD_RECOVERY_RUNNING will be cleared in this case. And during the race
window, action_store() will return -EBUSY, which will cause some
mdadm tests to fail. For example:
The test 07reshape5intr will add a new disk to array, then start
reshape:
mdadm /dev/md0 --add /dev/xxx
mdadm --grow /dev/md0 -n 3
And add_bound_rdev() from mdadm --add will set MD_RECOVERY_NEEDED,
then during the race windown, mdadm --grow will fail.
Fix the problem by waiting in action_store() during the race window,
fail only if sync_thread is registered.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-8-yukuai1@huaweicloud.com
Caller will always set MD_RECOVERY_FROZEN if check_seq is true, and
always clear MD_RECOVERY_FROZEN if check_seq is false, hence replace
the parameter with test_bit() to make code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-7-yukuai1@huaweicloud.com
In order to make code related to sync_thread cleaner in following
patches, also add detail comment about each sync action. And also
prepare to remove the related recovery_flags in the fulture.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-3-yukuai1@huaweicloud.com
Currently there are lots of flags with the same confusing prefix
"MD_REOCVERY_", and there are two main types of flags, sync thread runnng
status, I prefer prefix "SYNC_THREAD_", and sync thread action, I perfer
prefix "SYNC_ACTION_".
For now, rearrange and update comment to improve code readability,
there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-2-yukuai1@huaweicloud.com
__write_sb_page() rounds up the io size to the optimal io size if it
doesn't exceed the data offset, but it doesn't check the final size
exceeds the bitmap length.
For example:
page count - 1
page size - 4K
data offset - 1M
optimal io size - 256K
The final io size would be 256K (64 pages) but md_bitmap_storage_alloc()
allocated 1 page, the IO would write 1 valid page and 63 pages that
happens to be allocated afterwards. This leaks memory to the raid device
superblock.
This issue caused a data transfer failure in nvme-tcp. The network
drivers checks the first page of an IO with sendpage_ok(), it returns
true if the page isn't a slabpage and refcount >= 1. If the page
!sendpage_ok() the network driver disables MSG_SPLICE_PAGES.
As of now the network layer assumes all the pages of the IO are
sendpage_ok() when MSG_SPLICE_PAGES is on.
The bitmap pages aren't slab pages, the first page of the IO is
sendpage_ok(), but the additional pages that happens to be allocated
after the bitmap pages might be !sendpage_ok(). That cause
skb_splice_from_iter() to stop the data transfer, in the case below it
hangs 'mdadm --create'.
The bug is reproducible, in order to reproduce we need nvme-over-tcp
controllers with optimal IO size bigger than PAGE_SIZE. Creating a raid
with bitmap over those devices reproduces the bug.
In order to simulate large optimal IO size you can use dm-stripe with a
single device.
Script to reproduce the issue on top of brd devices using dm-stripe is
attached below (will be added to blktest).
I have added some logs to test the theory:
...
md: created bitmap (1 pages) for device md127
__write_sb_page before md_super_write offset: 16, size: 262144. pfn: 0x53ee
=== __write_sb_page before md_super_write. logging pages ===
pfn: 0x53ee, slab: 0 <-- the only page that allocated for the bitmap
pfn: 0x53ef, slab: 1
pfn: 0x53f0, slab: 0
pfn: 0x53f1, slab: 0
pfn: 0x53f2, slab: 0
pfn: 0x53f3, slab: 1
...
nvme_tcp: sendpage_ok - pfn: 0x53ee, len: 262144, offset: 0
skbuff: before sendpage_ok() - pfn: 0x53ee
skbuff: before sendpage_ok() - pfn: 0x53ef
WARNING at net/core/skbuff.c:6848 skb_splice_from_iter+0x142/0x450
skbuff: !sendpage_ok - pfn: 0x53ef. is_slab: 1, page_count: 1
...
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ofir Gal <ofir.gal@volumez.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240607072748.3182199-1-ofir.gal@volumez.com
The core md code calls the ->free method which already frees conf.
Fixes: 07f1a6850c ("md/raid1: fail run raid1 array when active disk less than one")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240604172607.3185916-3-hch@lst.de
The core md code calls the ->free method which already frees conf.
Fixes: 0c031fd37f ("md: Move alloc/free acct bioset in to personality")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240604172607.3185916-2-hch@lst.de
Setting bio to NULL and checking 'if(!bio)' is redundant and looks strange,
just consolidate them into one condition. There are no functional changes.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240528203149.2383260-1-linan666@huaweicloud.com
Deadlock occurs when mddev is being suspended while some flush bio is in
progress. It is a complex issue.
T1. the first flush is at the ending stage, it clears 'mddev->flush_bio'
and tries to submit data, but is blocked because mddev is suspended
by T4.
T2. the second flush sets 'mddev->flush_bio', and attempts to queue
md_submit_flush_data(), which is already running (T1) and won't
execute again if on the same CPU as T1.
T3. the third flush inc active_io and tries to flush, but is blocked because
'mddev->flush_bio' is not NULL (set by T2).
T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc
by T3.
T1 T2 T3 T4
(flush 1) (flush 2) (third 3) (suspend)
md_submit_flush_data
mddev->flush_bio = NULL;
.
. md_flush_request
. mddev->flush_bio = bio
. queue submit_flushes
. .
. . md_handle_request
. . active_io + 1
. . md_flush_request
. . wait !mddev->flush_bio
. .
. . mddev_suspend
. . wait !active_io
. .
. submit_flushes
. queue_work md_submit_flush_data
. //md_submit_flush_data is already running (T1)
.
md_handle_request
wait resume
The root issue is non-atomic inc/dec of active_io during flush process.
active_io is dec before md_submit_flush_data is queued, and inc soon
after md_submit_flush_data() run.
md_flush_request
active_io + 1
submit_flushes
active_io - 1
md_submit_flush_data
md_handle_request
active_io + 1
make_request
active_io - 1
If active_io is dec after md_handle_request() instead of within
submit_flushes(), make_request() can be called directly intead of
md_handle_request() in md_submit_flush_data(), and active_io will
only inc and dec once in the whole flush process. Deadlock will be
fixed.
Additionally, the only difference between fixing the issue and before is
that there is no return error handling of make_request(). But after
previous patch cleaned md_write_start(), make_requst() only return error
in raid5_make_request() by dm-raid, see commit 41425f96d7 ("dm-raid456,
md/raid456: fix a deadlock for dm-raid456 while io concurrent with
reshape)". Since dm always splits data and flush operation into two
separate io, io size of flush submitted by dm always is 0, make_request()
will not be called in md_submit_flush_data(). To prevent future
modifications from introducing issues, add WARN_ON to ensure
make_request() no error is returned in this context.
Fixes: fa2bbff7b0 ("md: synchronize flush io with array reconfiguration")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240525185257.3896201-3-linan666@huaweicloud.com
Commit cc27b0c78c ("md: fix deadlock between mddev_suspend() and
md_write_start()") aborted md_write_start() with false when mddev is
suspended, which fixed a deadlock if calling mddev_suspend() with
holding reconfig_mutex(). Since mddev_suspend() now includes
lockdep_assert_not_held(), it no longer holds the reconfig_mutex. This
makes previous abort unnecessary. Now, remove unnecessary abort and
change function return value to void.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240525185257.3896201-2-linan666@huaweicloud.com
