Commit Graph

4123 Commits

Author SHA1 Message Date
Linus Torvalds
5518b69b76 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...
2017-07-05 12:31:59 -07:00
David S. Miller
57a53a0b67 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:

====================
pull request: bluetooth-next 2017-07-01

Here are some more Bluetooth patches for the 4.13 kernel:

 - Added support for Broadcom BCM43430 controllers
 - Added sockaddr length checks before accessing sa_family
 - Fixed possible "might sleep" errors in bnep, cmtp and hidp modules
 - A few other minor fixes

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 15:57:29 -07:00
Reshetova, Elena
41c6d650f6 net: convert sock.sk_refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

This patch uses refcount_inc_not_zero() instead of
atomic_inc_not_zero_hint() due to absense of a _hint()
version of refcount API. If the hint() version must
be used, we might need to revisit API.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 07:39:08 -07:00
Mateusz Jurczyk
d2ecfa765d Bluetooth: Add sockaddr length checks before accessing sa_family in bind and connect handlers
Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in bind() and connect()
handlers of the Bluetooth sockets. Since neither syscall enforces a minimum
size of the corresponding memory region, very short sockaddrs (zero or one
byte long) result in operating on uninitialized memory while referencing
sa_family.

Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-29 14:37:57 +02:00
Tejun Heo
29e2dd0d56 bluetooth: remove WQ_MEM_RECLAIM from hci workqueues
Bluetooth hci uses ordered HIGHPRI, MEM_RECLAIM workqueues.  It's
likely that the flags came from mechanical conversion from
create_singlethread_workqueue().  Bluetooth shouldn't be depended upon
for memory reclaim and the spurious MEM_RECLAIM flag can trigger the
following warning.  Remove WQ_MEM_RECLAIM and convert to
alloc_ordered_workqueue() while at it.

  workqueue: WQ_MEM_RECLAIM hci0:hci_power_off is flushing !WQ_MEM_RECLAIM events:btusb_work
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 14231 at /home/brodo/local/kernel/git/linux/kernel/workqueue.c:2423 check_flush_dependency+0xb3/0x100
  Modules linked in:
  CPU: 2 PID: 14231 Comm: kworker/u9:4 Not tainted 4.12.0-rc6+ #3
  Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A11 12/08/2016
  Workqueue: hci0 hci_power_off
  task: ffff9432dad58000 task.stack: ffff986d43790000
  RIP: 0010:check_flush_dependency+0xb3/0x100
  RSP: 0018:ffff986d43793c90 EFLAGS: 00010086
  RAX: 000000000000005a RBX: ffff943316810820 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000096 RDI: 0000000000000001
  RBP: ffff986d43793cb0 R08: 0000000000000775 R09: ffffffff85bdd5c0
  R10: 0000000000000040 R11: 0000000000000000 R12: ffffffff84d596e0
  R13: ffff9432dad58000 R14: ffff94321c640320 R15: ffff9432dad58000
  FS:  0000000000000000(0000) GS:ffff94331f500000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007b8bca242000 CR3: 000000014f60a000 CR4: 00000000003406e0
  Call Trace:
   flush_work+0x8a/0x1c0
   ? flush_work+0x184/0x1c0
   ? skb_free_head+0x21/0x30
   __cancel_work_timer+0x124/0x1b0
   ? hci_dev_do_close+0x2a4/0x4d0
   cancel_work_sync+0x10/0x20
   btusb_close+0x23/0x100
   hci_dev_do_close+0x2ca/0x4d0
   hci_power_off+0x1e/0x50
   process_one_work+0x184/0x3e0
   worker_thread+0x4a/0x3a0
   ? preempt_count_sub+0x9b/0x100
   ? preempt_count_sub+0x9b/0x100
   kthread+0x125/0x140
   ? process_one_work+0x3e0/0x3e0
   ? __kthread_create_on_node+0x1a0/0x1a0
   ? do_syscall_64+0x58/0xd0
   ret_from_fork+0x27/0x40
  Code: 00 75 bf 49 8b 56 18 48 8d 8b b0 00 00 00 48 81 c6 b0 00 00 00 4d 89 e0 48 c7 c7 20 23 6b 85 c6 05 83 cd 31 01 01 e8 bf c4 0c 00 <0f> ff eb 93 80 3d 74 cd 31 01 00 75 a5 65 48 8b 04 25 00 c5 00
  ---[ end trace b88fd2f77754bfec ]---

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-29 14:36:38 +02:00
Jeffy Chen
5da8e47d84 Bluetooth: hidp: fix possible might sleep error in hidp_session_thread
It looks like hidp_session_thread has same pattern as the issue reported in
old rfcomm:

	while (1) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (condition)
			break;
		// may call might_sleep here
		schedule();
	}
	__set_current_state(TASK_RUNNING);

Which fixed at:
	dfb2fae Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: AL Yu-Chen Cho <acho@suse.com>
Tested-by: Rohit Vaswani <rvaswani@nvidia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-27 19:32:11 +02:00
Jeffy Chen
f06d977309 Bluetooth: cmtp: fix possible might sleep error in cmtp_session
It looks like cmtp_session has same pattern as the issue reported in
old rfcomm:

	while (1) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (condition)
			break;
		// may call might_sleep here
		schedule();
	}
	__set_current_state(TASK_RUNNING);

Which fixed at:
	dfb2fae Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: AL Yu-Chen Cho <acho@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-27 19:32:11 +02:00
Jeffy Chen
25717382c1 Bluetooth: bnep: fix possible might sleep error in bnep_session
It looks like bnep_session has same pattern as the issue reported in
old rfcomm:

	while (1) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (condition)
			break;
		// may call might_sleep here
		schedule();
	}
	__set_current_state(TASK_RUNNING);

Which fixed at:
	dfb2fae Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: AL Yu-Chen Cho <acho@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-27 19:32:11 +02:00
yuan linyu
de77b966ce net: introduce __skb_put_[zero, data, u8]
follow Johannes Berg, semantic patch file as below,
@@
identifier p, p2;
expression len;
expression skb;
type t, t2;
@@
(
-p = __skb_put(skb, len);
+p = __skb_put_zero(skb, len);
|
-p = (t)__skb_put(skb, len);
+p = __skb_put_zero(skb, len);
)
... when != p
(
p2 = (t2)p;
-memset(p2, 0, len);
|
-memset(p, 0, len);
)

@@
identifier p;
expression len;
expression skb;
type t;
@@
(
-t p = __skb_put(skb, len);
+t p = __skb_put_zero(skb, len);
)
... when != p
(
-memset(p, 0, len);
)

@@
type t, t2;
identifier p, p2;
expression skb;
@@
t *p;
...
(
-p = __skb_put(skb, sizeof(t));
+p = __skb_put_zero(skb, sizeof(t));
|
-p = (t *)__skb_put(skb, sizeof(t));
+p = __skb_put_zero(skb, sizeof(t));
)
... when != p
(
p2 = (t2)p;
-memset(p2, 0, sizeof(*p));
|
-memset(p, 0, sizeof(*p));
)

@@
expression skb, len;
@@
-memset(__skb_put(skb, len), 0, len);
+__skb_put_zero(skb, len);

@@
expression skb, len, data;
@@
-memcpy(__skb_put(skb, len), data, len);
+__skb_put_data(skb, data, len);

@@
expression SKB, C, S;
typedef u8;
identifier fn = {__skb_put};
fresh identifier fn2 = fn ## "_u8";
@@
- *(u8 *)fn(SKB, S) = C;
+ fn2(SKB, C);

Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20 13:30:14 -04:00
Ingo Molnar
ac6424b981 sched/wait: Rename wait_queue_t => wait_queue_entry_t
Rename:

	wait_queue_t		=>	wait_queue_entry_t

'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.

Start sorting this out by renaming it to 'wait_queue_entry_t'.

This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 12:18:27 +02:00
Johannes Berg
634fef6107 networking: add and use skb_put_u8()
Joe and Bjørn suggested that it'd be nicer to not have the
cast in the fairly common case of doing
	*(u8 *)skb_put(skb, 1) = c;

Add skb_put_u8() for this case, and use it across the code,
using the following spatch:

    @@
    expression SKB, C, S;
    typedef u8;
    identifier fn = {skb_put};
    fresh identifier fn2 = fn ## "_u8";
    @@
    - *(u8 *)fn(SKB, S) = C;
    + fn2(SKB, C);

Note that due to the "S", the spatch isn't perfect, it should
have checked that S is 1, but there's also places that use a
sizeof expression like sizeof(var) or sizeof(u8) etc. Turns
out that nobody ever did something like
	*(u8 *)skb_put(skb, 2) = c;

which would be wrong anyway since the second byte wouldn't be
initialized.

Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:40 -04:00
Johannes Berg
d58ff35122 networking: make skb_push & __skb_push return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

    @@
    expression SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - fn(SKB, LEN)[0]
    + *(u8 *)fn(SKB, LEN)

Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:40 -04:00
Johannes Berg
af72868b90 networking: make skb_pull & friends return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = {
            skb_pull,
            __skb_pull,
            skb_pull_inline,
            __pskb_pull_tail,
            __pskb_pull,
            pskb_pull
    };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = {
            skb_pull,
            __skb_pull,
            skb_pull_inline,
            __pskb_pull_tail,
            __pskb_pull,
            pskb_pull
    };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:39 -04:00
Johannes Berg
4df864c1d9 networking: make skb_put & friends return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions (skb_put, __skb_put and pskb_put) return void *
and remove all the casts across the tree, adding a (u8 *) cast only
where the unsigned char pointer was used directly, all done with the
following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = { skb_put, __skb_put };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = { skb_put, __skb_put };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

which actually doesn't cover pskb_put since there are only three
users overall.

A handful of stragglers were converted manually, notably a macro in
drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
instances in net/bluetooth/hci_sock.c. In the former file, I also
had to fix one whitespace problem spatch introduced.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:39 -04:00
Johannes Berg
59ae1d127a networking: introduce and use skb_put_data()
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.

An spatch similar to the one for skb_put_zero() converts many
of the places using it:

    @@
    identifier p, p2;
    expression len, skb, data;
    type t, t2;
    @@
    (
    -p = skb_put(skb, len);
    +p = skb_put_data(skb, data, len);
    |
    -p = (t)skb_put(skb, len);
    +p = skb_put_data(skb, data, len);
    )
    (
    p2 = (t2)p;
    -memcpy(p2, data, len);
    |
    -memcpy(p, data, len);
    )

    @@
    type t, t2;
    identifier p, p2;
    expression skb, data;
    @@
    t *p;
    ...
    (
    -p = skb_put(skb, sizeof(t));
    +p = skb_put_data(skb, data, sizeof(t));
    |
    -p = (t *)skb_put(skb, sizeof(t));
    +p = skb_put_data(skb, data, sizeof(t));
    )
    (
    p2 = (t2)p;
    -memcpy(p2, data, sizeof(*p));
    |
    -memcpy(p, data, sizeof(*p));
    )

    @@
    expression skb, len, data;
    @@
    -memcpy(skb_put(skb, len), data, len);
    +skb_put_data(skb, data, len);

(again, manually post-processed to retain some comments)

Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:37 -04:00
David S. Miller
0ddead90b2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The conflicts were two cases of overlapping changes in
batman-adv and the qed driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15 11:59:32 -04:00
Marcel Holtmann
313f6888c8 Bluetooth: Send HCI Set Event Mask Page 2 command only when needed
The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices
report support for the Set Event Mask Page 2 command, but actually do
return an error when trying to use it.

  < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
  > HCI Event: Command Complete (0x0e) plen 68
       Read Local Supported Commands (0x04|0x0002) ncmd 1
         Status: Success (0x00)
         Commands: 162 entries
           ...
           Set Event Mask Page 2 (Octet 22 - Bit 2)
           ...

  < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8
         Mask: 0x0000000000000000
  > HCI Event: Command Complete (0x0e) plen 4
       Set Event Mask Page 2 (0x03|0x0063) ncmd 1
         Status: Unknown HCI Command (0x01)

Since these controllers do not support any feature that would require
the event mask page 2 to be modified, it is safe to not send this
command at all. The default value is all bits set to zero.

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  9 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a5c ProdID=21e6 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=F82FA8E8CFC0
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
2017-06-12 11:45:30 +02:00
Jason A. Donenfeld
329d823098 Bluetooth: use constant time memory comparison for secret values
This file is filled with complex cryptography. Thus, the comparisons of
MACs and secret keys and curve points and so forth should not add timing
attacks, which could either result in a direct forgery, or, given the
complexity, some other type of attack.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2017-06-10 15:45:40 +02:00
David S. Miller
cf124db566 net: Fix inconsistent teardown and release of private netdev state.
Network devices can allocate reasources and private memory using
netdev_ops->ndo_init().  However, the release of these resources
can occur in one of two different places.

Either netdev_ops->ndo_uninit() or netdev->destructor().

The decision of which operation frees the resources depends upon
whether it is necessary for all netdev refs to be released before it
is safe to perform the freeing.

netdev_ops->ndo_uninit() presumably can occur right after the
NETDEV_UNREGISTER notifier completes and the unicast and multicast
address lists are flushed.

netdev->destructor(), on the other hand, does not run until the
netdev references all go away.

Further complicating the situation is that netdev->destructor()
almost universally does also a free_netdev().

This creates a problem for the logic in register_netdevice().
Because all callers of register_netdevice() manage the freeing
of the netdev, and invoke free_netdev(dev) if register_netdevice()
fails.

If netdev_ops->ndo_init() succeeds, but something else fails inside
of register_netdevice(), it does call ndo_ops->ndo_uninit().  But
it is not able to invoke netdev->destructor().

This is because netdev->destructor() will do a free_netdev() and
then the caller of register_netdevice() will do the same.

However, this means that the resources that would normally be released
by netdev->destructor() will not be.

Over the years drivers have added local hacks to deal with this, by
invoking their destructor parts by hand when register_netdevice()
fails.

Many drivers do not try to deal with this, and instead we have leaks.

Let's close this hole by formalizing the distinction between what
private things need to be freed up by netdev->destructor() and whether
the driver needs unregister_netdevice() to perform the free_netdev().

netdev->priv_destructor() performs all actions to free up the private
resources that used to be freed by netdev->destructor(), except for
free_netdev().

netdev->needs_free_netdev is a boolean that indicates whether
free_netdev() should be done at the end of unregister_netdevice().

Now, register_netdevice() can sanely release all resources after
ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit()
and netdev->priv_destructor().

And at the end of unregister_netdevice(), we invoke
netdev->priv_destructor() and optionally call free_netdev().

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07 15:53:24 -04:00
Markus Elfring
5d4acfc141 Bluetooth: Delete error messages for failed memory allocations in two functions
Omit two extra messages for memory allocation failures in these functions.

This issue was detected by using the Coccinelle software.

Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-22 10:23:41 +02:00
Marcel Holtmann
b56c7b2548 Bluetooth: Skip vendor diagnostic configuration for HCI User Channel
When the HCI User Channel access is requested, then do not try to
undermine it with vendor diagnostic configuration. The exclusive user
is required to configure its own vendor diagnostic in that case and
can not rely on the host stack support.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18 13:52:49 +02:00
Marcel Holtmann
de2ba3039c Bluetooth: Set LE Default PHY preferences
If the LE Set Default PHY command is supported, the indicate to the
controller that the host has no preferences for transmitter PHY or
receiver PHY selection.

Issuing this command gives the controller a clear indication that other
PHY can be selected if available.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18 13:52:49 +02:00
Marcel Holtmann
27bbca4402 Bluetooth: Enable LE PHY Update Complete event
If either LE Set Default PHY command or LE Set PHY commands is
supported, then enable the LE PHY Update Complete event.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18 13:52:49 +02:00
Marcel Holtmann
9756d33b85 Bluetooth: Enable LE Channel Selection Algorithm event
If the Channel Selection Algorithm #2 feature is supported, then enable
the new LE Channel Selection Algorithm event.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18 13:52:49 +02:00
Marcel Holtmann
122048752e Bluetooth: Set LE Suggested Default Data Length to maximum
When LE Data Packet Length Extension is supported, then actually
increase the suggested default data length to the maximum to enable
higher througput.

< HCI Command: LE Read Maximum Data Length (0x08|0x002f) plen 0
> HCI Event: Command Complete (0x0e) plen 12
      LE Read Maximum Data Length (0x08|0x002f) ncmd 1
        Status: Success (0x00)
        Max TX octets: 251
        Max TX time: 2120
        Max RX octets: 251
        Max RX time: 2120

< HCI Command: LE Read Suggested Default Data Length (0x08|0x0023) plen 0
> HCI Event: Command Complete (0x0e) plen 8
      LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
        Status: Success (0x00)
        TX octets: 27
        TX time: 328

< HCI Command: LE Write Suggested Default Data Length (0x08|0x0024) plen 4
        TX octets: 251
        TX time: 2120
> HCI Event: Command Complete (0x0e) plen 4
      LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
        Status: Success (0x00)

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18 13:52:49 +02:00
linzhang
173e7837a2 net: socket: mark socket protocol handler structs as const
Signed-off-by: linzhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16 11:54:07 -04:00
Marcel Holtmann
71653eb64b Bluetooth: Add selftest for ECDH key generation
Since the ECDH key generation takes a different path, it needs to be
tested as well. For this generate the public debug key from the private
debug key and compare both.

This also moves the seeding of the private key into the SMP calling code
to allow for easier re-use of the ECDH key generation helper.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-30 16:52:43 +03:00
Marcel Holtmann
f958315358 Bluetooth: zero kpp input for key generation
When generating new ECDH keys with kpp, the shared secret input needs to
be set to NULL. Fix this by including kpp_request_set_input call.

Fixes: 58771c1c ("Bluetooth: convert smp and selftest to crypto kpp
API")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-30 16:52:39 +03:00
Szymon Janc
ab89f0bdd6 Bluetooth: Fix user channel for 32bit userspace on 64bit kernel
Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being
defined as 0x80000000. This results in sendmsg failure if used from 32bit
userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT
in flags check in hci_sock_sendmsg.

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marko Kiiskila <marko@runtime.io>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2017-04-30 12:22:14 +02:00
Salvatore Benedetto
763d9a302a Bluetooth: allocate data for kpp on heap
Bluetooth would crash when computing ECDH keys with kpp
if VMAP_STACK is enabled. Fix by allocating data passed
to kpp on heap.

Fixes: 58771c1c ("Bluetooth: convert smp and selftest to crypto kpp
API")
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-30 12:22:05 +02:00
Salvatore Benedetto
58771c1cb0 Bluetooth: convert smp and selftest to crypto kpp API
* Convert both smp and selftest to crypto kpp API
* Remove module ecc as no more required
* Add ecdh_helper functions for wrapping kpp async calls

This patch has been tested *only* with selftest, which is called on
module loading.

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-25 04:53:42 +02:00
Patrik Flykt
258695222b bluetooth: Do not set IFF_POINTOPOINT
The IPv6 stack needs to send and receive Neighbor Discovery
messages. Remove the IFF_POINTOPOINT flag.

Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:41 +02:00
Luiz Augusto von Dentz
814f1b243d Bluetooth: 6lowpan: Set tx_queue_len to DEFAULT_TX_QUEUE_LEN
Make netdev queue packets if we run out of credits.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:41 +02:00
Luiz Augusto von Dentz
8a505b7f39 Bluetooth: L2CAP: Add l2cap_le_flowctl_send
Consolidate code sending data to LE CoC channels and adds proper
accounting of packets sent, the remaining credits and how many packets
are queued.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:41 +02:00
Luiz Augusto von Dentz
f183e52b8e Bluetooth: 6lowpan: Use netif APIs to flow control
Rely on netif_wake_queue and netif_stop_queue to flow control when
transmit resources are unavailable.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:40 +02:00
Luiz Augusto von Dentz
e1008f95e1 Bluetooth: 6lowpan: Don't drop packets when run out of credits
Since l2cap_chan_send will now queue the packets there is no point in
checking the credits anymore.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:40 +02:00
Luiz Augusto von Dentz
03732141bf Bluetooth: L2CAP: Don't return -EAGAIN if out of credits
Just keep queueing them into TX queue since the caller might just have
to do the same and there is no impact in adding another packet to the
TX queue even if there aren't any credits to transmit them.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:40 +02:00
Luiz Augusto von Dentz
da75fdc6bd Bluetooth: 6lowpan: Print errors during recv_pkt
This makes should make it more clear why a packet is being dropped.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:40 +02:00
Luiz Augusto von Dentz
27ce68a37b Bluetooth: 6lowpan: Remove unnecessary peer lookup
During chan_recv_cb there is already a peer lookup which can be passed
to recv_pkt directly instead of the channel.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:40 +02:00
Michael Scott
6dea44f5ac Bluetooth: 6lowpan: fix use after free in chan_suspend/resume
A status field in the skb_cb struct was storing a channel status
based on channel suspend/resume events.  This stored status was
then used to return EAGAIN if there were packet sending issues
in snd_pkt().

The issue is that the skb has been freed by the time the callback
to 6lowpan's suspend/resume was called.  So, this generates a
"use after free" issue that was noticed while running kernel tests
with KASAN debug enabled.

Let's eliminate the status field entirely as we can use the channel
tx_credits to indicate whether we should return EAGAIN when handling
packets.

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:39 +02:00
Michael Scott
d2891c4d07 Bluetooth: 6lowpan: fix delay work init in add_peer_chan()
When adding 6lowpan devices very rapidly we sometimes see a crash:
[23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1
[23122.315400] Hardware name: HiKey Development Board (DT)
[23122.320623] task: ffff800075443080 task.stack: ffff800075484000
[23122.326551] PC is at expire_timers+0x70/0x150
[23122.330907] LR is at run_timer_softirq+0xa0/0x1a0
[23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5

This was due to add_peer_chan() unconditionally initializing the
lowpan_btle_dev->notify_peers delayed work structure, even if the
lowpan_btle_dev passed into add_peer_chan() had previously been
initialized.

Normally, this would go unnoticed as the delayed work timer is set for
100 msec, however when calling add_peer_chan() faster than 100 msec it
clears out a previously queued delay work causing the crash above.

To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed
in so that it only performs the delay work initialization when needed.

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:39 +02:00
Colin Ian King
fa0eaf840a 6lowpan: fix assignment of peer_addr
The data from peer->chan->dst is not being copied to peer_addr, the
current code just updates the pointer and not the contents of what
it points to.  Fix this with the intended assignment.

Detected by CoverityScan, CID#1422111 ("Parse warning
(PW.PARAM_SET_BUT_NOT_USED)")

Fixes: fb6f2f606ce8 ("6lowpan: Fix IID format for Bluetooth")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:39 +02:00
Jonas Holmberg
b48c3b59a3 Bluetooth: Change initial min and max interval
Use the initial connection interval recommended in Bluetooth
Specification v4.2 (30ms - 50ms).

Signed-off-by: Jonas Holmberg <jonashg@axis.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:38 +02:00
Colin Ian King
cd50361c21 Bluetooth: fix assignments on error variable err
Variable err is being initialized to zero and then later being
set to the error return from the call to hci_req_run_skb; hence
we can remove the redundant initialization to zero.

Also on two occassions err is not being set from the error return
from the call to hci_req_run_skb, so add these missing assignments.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:38 +02:00
Dean Jenkins
27bfbc21a0 Bluetooth: Avoid bt_accept_unlink() double unlinking
There is a race condition between a thread calling bt_accept_dequeue()
and a different thread calling bt_accept_unlink(). Protection against
concurrency is implemented using sk locking. However, sk locking causes
serialisation of the bt_accept_dequeue() and bt_accept_unlink() threads.
This serialisation can cause bt_accept_dequeue() to obtain the sk from the
parent list but becomes blocked waiting for the sk lock held by the
bt_accept_unlink() thread. bt_accept_unlink() unlinks sk and this thread
releases the sk lock unblocking bt_accept_dequeue() which potentially runs
bt_accept_unlink() again on the same sk causing a crash. The attempt to
double unlink the same sk from the parent list can cause a NULL pointer
dereference crash due to bt_sk(sk)->parent becoming NULL on the first
unlink, followed by the second unlink trying to execute
bt_sk(sk)->parent->sk_ack_backlog-- in bt_accept_unlink() which crashes.

When sk is in the parent list, bt_sk(sk)->parent will be not be NULL.
When sk is removed from the parent list, bt_sk(sk)->parent is set to
NULL. Therefore, add a defensive check for bt_sk(sk)->parent not being
NULL to ensure that sk is still in the parent list after the sk lock has
been taken in bt_accept_dequeue(). If bt_sk(sk)->parent is detected as
being NULL then restart the loop so that the loop variables are refreshed
to use the latest values. This is necessary as list_for_each_entry_safe()
is not thread safe so causing a risk of an infinite loop occurring as sk
could point to itself.

In addition, in bt_accept_dequeue() increase the sk reference count to
protect against early freeing of sk. Early freeing can be possible if the
bt_accept_unlink() thread calls l2cap_sock_kill() or rfcomm_sock_kill()
functions before bt_accept_dequeue() gets the sk lock.

For test purposes, the probability of failure can be increased by putting
a msleep of 1 second in bt_accept_dequeue() between getting the sk and
waiting for the sk lock. This exposes the fact that the loop
list_for_each_entry_safe(p, n, &bt_sk(parent)->accept_q) is not safe from
threads that unlink sk from the list in parallel with the loop which can
cause sk to become stale within the loop.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:37 +02:00
Dean Jenkins
e163376220 Bluetooth: Handle bt_accept_enqueue() socket atomically
There is a small risk that bt_accept_unlink() runs concurrently with
bt_accept_enqueue() on the same socket. This scenario could potentially
lead to a NULL pointer dereference of the socket's parent member because
the socket can be on the list but the socket's parent member is not yet
updated by bt_accept_enqueue().

Therefore, add socket locking inside bt_accept_enqueue() so that the
socket is added to the list AND the parent's socket address is set in the
socket's parent member. The socket locking ensures that the socket is on
the list with a valid non-NULL parent member.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:37 +02:00
Luiz Augusto von Dentz
9dae2e0303 6lowpan: Fix IID format for Bluetooth
According to RFC 7668 U/L bit shall not be used:

https://wiki.tools.ietf.org/html/rfc7668#section-3.2.2 [Page 10]:

   In the figure, letter 'b' represents a bit from the
   Bluetooth device address, copied as is without any changes on any
   bit.  This means that no bit in the IID indicates whether the
   underlying Bluetooth device address is public or random.

   |0              1|1              3|3              4|4              6|
   |0              5|6              1|2              7|8              3|
   +----------------+----------------+----------------+----------------+
   |bbbbbbbbbbbbbbbb|bbbbbbbb11111111|11111110bbbbbbbb|bbbbbbbbbbbbbbbb|
   +----------------+----------------+----------------+----------------+

Because of this the code cannot figure out the address type from the IP
address anymore thus it makes no sense to use peer_lookup_ba as it needs
the peer address type.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:36 +02:00
Luiz Augusto von Dentz
fa09ae661f 6lowpan: Use netdev addr_len to determine lladdr len
This allow technologies such as Bluetooth to use its native lladdr which
is eui48 instead of eui64 which was expected by functions like
lowpan_header_decompress and lowpan_header_compress.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:36 +02:00
Patrik Flykt
c259d1413b bluetooth: Set 6 byte device addresses
Set BTLE MAC addresses that are 6 bytes long and not 8 bytes
that are used in other places with 6lowpan.

Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:36 +02:00
Elena Reshetova
dab6b5daee Bluetooth: convert rfcomm_dlc.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:36 +02:00