Commit Graph

1889 Commits

Author SHA1 Message Date
Eric W. Biederman
2a786b452e [PATCH] genirq: Mask irqs when migrating them.
move_native_irqs tries to do the right thing when migrating irqs
by disabling them.  However disabling them is a software logical
thing, not a hardware thing.  This has always been a little flaky
and after Ingo's latest round of changes it is guaranteed to not
mask the apic.

So this patch fixes move_native_irq to directly call the mask and
unmask chip methods to guarantee that we mask the irq when we
are migrating it.  We must do this as it is required by
all code that call into the path.

Since we don't know the masked status when IRQ_DISABLED is
set so we will not be able to restore it.   The patch makes the code
just give up and trying again the next time this routing is called.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26 10:34:08 -08:00
Jarek Poplawski
60e114d113 [PATCH] lockdep: debug_locks check after check_chain_key
In __lock_acquire check_chain_key can turn off debug_locks, so check is
needed to assure proper return code.

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:14 -08:00
Srinivasa Ds
346fd59bab [PATCH] kprobes: list all active probes in the system
This patch lists all active probes in the system by scanning through
kprobe_table[].  It takes care of aggregate handlers and prints the type of
the probe.  Letter "k" for kprobes, "j" for jprobes, "r" for kretprobes.
It also lists address of the instruction,its symbolic name(function name +
offset) and the module name.  One can access this file through
/sys/kernel/debug/kprobes/list.

Output looks like this
=====================
llm40:~/a # cat /sys/kernel/debug/kprobes/list
c0169ae3  r  sys_read+0x0
c0169ae3  k  sys_read+0x0
c01694c8  k  vfs_write+0x0
c0167d20  r  sys_open+0x0
f8e658a6  k  reiserfs_delete_inode+0x0  reiserfs
c0120f4a  k  do_fork+0x0
c0120f4a  j  do_fork+0x0
c0169b4a  r  sys_write+0x0
c0169b4a  k  sys_write+0x0
c0169622  r  vfs_read+0x0
=================================

[akpm@linux-foundation.org: cleanup]
[ananth@in.ibm.com: sparc build fix]
Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:14 -08:00
Thomas Gleixner
bc5393a6c9 [PATCH] NOHZ: Produce debug output instead of a BUG()
The BUG_ON() in tick_nohz_stop_sched_tick() triggers on some boxen.
Remove the BUG_ON and print information about the pending softirq
to allow better debugging of the problem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-19 14:18:43 -08:00
Ingo Molnar
6ba9b346e1 [PATCH] NOHZ: Fix RCU handling
When a CPU is needed for RCU the tick has to continue even when it was
stopped before.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-19 14:18:43 -08:00
Linus Torvalds
cb4aaf46c0 Merge branch 'audit.b37' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b37' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] AUDIT_FD_PAIR
  [PATCH] audit config lockdown
  [PATCH] minor update to rule add/delete messages (ver 2)
2007-02-19 13:29:54 -08:00
Linus Torvalds
874ff01bd9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  Documentation/kernel-docs.txt update.
  arch/cris: typo in KERN_INFO
  Storage class should be before const qualifier
  kernel/printk.c: comment fix
  update I/O sched Kconfig help texts - CFQ is now default, not AS.
  Remove duplicate listing of Cris arch from README
  kbuild: more doc. cleanups
  doc: make doc. for maxcpus= more visible
  drivers/net/eexpress.c: remove duplicate comment
  add a help text for BLK_DEV_GENERIC
  correct a dead URL in the IP_MULTICAST help text
  fix the BAYCOM_SER_HDX help text
  fix SCSI_SCAN_ASYNC help text
  trivial documentation patch for platform.txt
  Fix typos concerning hierarchy
  Fix comment typo "spin_lock_irqrestore".
  Fix misspellings of "agressive".
  drivers/scsi/a100u2w.c: trivial typo patch
  Correct trivial typo in log2.h.
  Remove useless FIND_FIRST_BIT() macro from cardbus.c.
  ...
2007-02-19 13:29:02 -08:00
Al Viro
db3495099d [PATCH] AUDIT_FD_PAIR
Provide an audit record of the descriptor pair returned by pipe() and
socketpair().  Rewritten from the original posted to linux-audit by
John D. Ramsdell <ramsdell@mitre.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-02-17 21:30:15 -05:00
Steve Grubb
6a01b07fae [PATCH] audit config lockdown
The following patch adds a new mode to the audit system. It uses the
audit_enabled config option to introduce the idea of audit enabled, but
configuration is immutable. Any attempt to change the configuration
while in this mode is audited. To change the audit rules, you'd need to
reboot the machine.

To use this option, you'd need a modified version of auditctl and use "-e 2".
This is intended to go at the end of the audit.rules file for people that
want an immutable configuration.

This patch also adds "res=" to a number of configuration commands that did not
have it before.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-02-17 21:30:12 -05:00
Steve Grubb
a17b4ad778 [PATCH] minor update to rule add/delete messages (ver 2)
I was looking at parsing some of these messages and found that I wanted what
it was doing next to an op= for the parser to key on. Also missing was the list
number and results.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-02-17 21:30:09 -05:00
Patrick Pletscher
0bbfb7c2e4 kernel/printk.c: comment fix
Signed-off-by: Patrick Pletscher <pat@pletscher.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:10:16 +01:00
Randy Dunlap
ef665c1a06 sysfs: fix build errors: uevent with CONFIG_SYSFS=n
Fix source files to build with CONFIG_SYSFS=n.
module_subsys is not available.

SYSFS=n, MODULES=y:	T:y
SYSFS=n, MODULES=n:	T:y

SYSFS=y, MODULES=y:	T:y
SYSFS=y, MODULES=n:	T:y

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:18 -08:00
Mariusz Kozlowski
b92be9f1ec Driver: remove redundant kobject_unregister checks
Here is a patch that removes all redundant kobject_unregister argument checks.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:17 -08:00
Kay Sievers
c353c3fb07 Driver core: let request_module() send a /sys/modules/kmod/-uevent
On recent systems, calls to /sbin/modprobe are handled by udev depending
on the kind of device the kernel has discovered. This patch creates an
uevent for the kernels internal request_module(), to let udev take control
over the request, instead of forking the binary directly by the kernel.
The direct execution of /sbin/modprobe can be disabled by setting:
  /sys/module/kmod/mod_request_helper (/proc/sys/kernel/modprobe)
to an empty string, the same way /proc/sys/kernel/hotplug is disabled on an
udev system.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:15 -08:00
Jan Beulich
5575ddf75c [PATCH] small irq management simplification
Use mask_ack_irq() where possible.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Randy Dunlap
472900b8b0 [PATCH] IRQ kernel-doc fixes
Fix kernel-doc warnings in IRQ management.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Ingo Molnar
76d2160147 [PATCH] genirq: do not mask interrupts by default
Never mask interrupts immediately upon request.  Disabling interrupts in
high-performance codepaths is rare, and on the other hand this change could
recover lost edges (or even other types of lost interrupts) by conservatively
only masking interrupts after they happen.  (NOTE: with this change the
highlevel irq-disable code still soft-disables this IRQ line - and if such an
interrupt happens then the IRQ flow handler keeps the IRQ masked.)

Mark i8529A controllers as 'never loses an edge'.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Paul E. McKenney
1f2ea0837d [PATCH] posix timers: RCU optimization for clock_gettime()
Use RCU to avoid the need to acquire tasklist_lock in the single-threaded
case of clock_gettime().  It still acquires tasklist_lock when for a
(potentially multithreaded) process.  This change allows realtime
applications to frequently monitor CPU consumption of individual tasks, as
requested (and now deployed) by some off-list users.

This has been in Ingo Molnar's -rt patchset since late 2005 with no
problems reported, and tests successfully on 2.6.20-rc6, so I believe that
it is long-since ready for mainline adoption.

[paulmck@linux.vnet.ibm.com: fix exit()/posix_cpu_clock_get() race spotted by Oleg]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
john stultz
c37e7bb5d2 [PATCH] time: x86_64: split x86_64/kernel/time.c up
In preparation for the x86_64 generic time conversion, this patch splits out
TSC and HPET related code from arch/x86_64/kernel/time.c into respective
hpet.c and tsc.c files.

[akpm@osdl.org: fix printk timestamps]
[akpm@osdl.org: cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
john stultz
acc9a9dcdd [PATCH] generic: vsyscall-gtod support for GENERIC_TIME
Provides generic infrastructure for vsyscall-gtod.

[akpm@osdl.org: cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:14:00 -08:00
Ingo Molnar
289f480af8 [PATCH] Add debugging feature /proc/timer_list
add /proc/timer_list, which prints all currently pending (high-res) timers,
all clock-event sources and their parameters in a human-readable form.

Sample output:

Timer List Version: v0.1
HRTIMER_MAX_CLOCK_BASES: 2
now at 4246046273872 nsecs

cpu: 0
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_stop_sched_tick, swapper/0
 # expires at 4246432689566 nsecs [in 386415694 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, pcscd/2050
 # expires at 4247018194689 nsecs [in 971920817 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, irqbalance/1909
 # expires at 4247351358392 nsecs [in 1305084520 nsecs]
 #3: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, crond/2157
 # expires at 4249097614968 nsecs [in 3051341096 nsecs]
 #4: <f5a90ec8>, it_real_fn, do_setitimer, syslogd/1888
 # expires at 4251329900926 nsecs [in 5283627054 nsecs]
  .expires_next   : 4246432689566 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 31306
  .idle_tick      : 4246020791890 nsecs
  .tick_stopped   : 1
  .idle_jiffies   : 986504
  .idle_calls     : 40700
  .idle_sleeps    : 36014
  .idle_entrytime : 4246019418883 nsecs
  .idle_sleeptime : 4178181972709 nsecs

cpu: 1
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_restart_sched_tick, swapper/0
 # expires at 4246050084568 nsecs [in 3810696 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, atd/2227
 # expires at 4261010635003 nsecs [in 14964361131 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, smartd/2332
 # expires at 5469485798970 nsecs [in 1223439525098 nsecs]
  .expires_next   : 4246050084568 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 24043
  .idle_tick      : 4246046084568 nsecs
  .tick_stopped   : 0
  .idle_jiffies   : 986510
  .idle_calls     : 26360
  .idle_sleeps    : 22551
  .idle_entrytime : 4246043874339 nsecs
  .idle_sleeptime : 4170763761184 nsecs

tick_broadcast_mask: 00000003
event_broadcast_mask: 00000001

CPU#0's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246432689566 nsecs

CPU#1's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246050084568 nsecs

Clock Event Device: hpet
 capabilities:   00000007
 max_delta_ns:   2147483647
 min_delta_ns:   3352
 mult:           61496110
 shift:          32
 set_next_event: hpet_next_event
 set_mode:       hpet_set_mode
 event_handler:  handle_nextevt_broadcast

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Ingo Molnar
82f67cd9fc [PATCH] Add debugging feature /proc/timer_stat
Add /proc/timer_stats support: debugging feature to profile timer expiration.
Both the starting site, process/PID and the expiration function is captured.
This allows the quick identification of timer event sources in a system.

Sample output:

# echo 1 > /proc/timer_stats
# cat /proc/timer_stats
Timer Stats Version: v0.1
Sample period: 4.010 s
  24,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
  11,     0 swapper          sk_reset_timer (tcp_delack_timer)
   6,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
  17,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
   4,  2050 pcscd            do_nanosleep (hrtimer_wakeup)
   5,  4179 sshd             sk_reset_timer (tcp_write_timer)
   4,  2248 yum-updatesd     schedule_timeout (process_timeout)
  18,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   3,     0 swapper          sk_reset_timer (tcp_delack_timer)
   1,     1 swapper          neigh_table_init_no_netlink (neigh_periodic_timer)
   2,     1 swapper          e1000_up (e1000_watchdog)
   1,     1 init             schedule_timeout (process_timeout)
100 total events, 25.24 events/sec

[ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ]
[bunk@stusta.de: nr_entries can become static]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
8bfd9a7a22 [PATCH] hrtimers: prevent possible itimer DoS
Fix potential setitimer DoS with high-res timers by pushing itimer rearm
processing to process context.

[Fixes from: Ingo Molnar <mingo@elte.hu>]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
54cdfdb47f [PATCH] hrtimers: add high resolution timer support
Implement high resolution timers on top of the hrtimers infrastructure and the
clockevents / tick-management framework.  This provides accurate timers for
all hrtimer subsystem users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
79bf2bb335 [PATCH] tick-management: dyntick / highres functionality
With Ingo Molnar <mingo@elte.hu>

Add functions to provide dynamic ticks and high resolution timers.  The code
which keeps track of jiffies and handles the long idle periods is shared
between tick based and high resolution timer based dynticks.  The dyntick
functionality can be disabled on the kernel commandline.  Provide also the
infrastructure to support high resolution timers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
f8381cba04 [PATCH] tick-management: broadcast functionality
With Ingo Molnar <mingo@elte.hu>

Add broadcast functionality, so per cpu clock event devices can be registered
as dummy devices or switched from/to broadcast on demand.  The broadcast
function distributes the events via the broadcast function of the clock event
device.  This is primarily designed to replace the switch apic timer to / from
IPI in power states, where the apic stops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
906568c9c6 [PATCH] tick-management: core functionality
With Ingo Molnar <mingo@elte.hu>

The tick-management code is the first user of the clockevents layer.  It takes
clock event devices from the clock events core and uses them to provide the
periodic tick.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
d316c57ff6 [PATCH] clockevents: add core functionality
Architectures register their clock event devices, in the clock events core.
Users of the clockevents core can get clock event devices for their use.  The
clockevents core code provides notification mechanisms for various clock
related management events.

This allows to control the clock event devices without the architectures
having to worry about the details of function assignment.  This is also a
preliminary for high resolution timers and dynamic ticks to allow the core
code to control the clock functionality without intrusive changes to the
architecture code.

[Fixes-by: Ingo Molnar <mingo@elte.hu>]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
5cfb6de7cd [PATCH] hrtimers: clean up callback tracking
Reintroduce ktimers feature "optimized away" by the ktimers review process:
remove the curr_timer pointer from the cpu-base and use the hrtimer state.

No functional changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
303e967ff9 [PATCH] hrtimers; add state tracking
Reintroduce ktimers feature "optimized away" by the ktimers review process:
multiple hrtimer states to enable the running of hrtimers without holding the
cpu-base-lock.

(The "optimized" rbtree hack carried only 2 states worth of information and we
need 4 for high resolution timers and dynamic ticks.)

No functional changes.

Build-fixes-from: Andrew Morton <akpm@osdl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
3c8aa39d7c [PATCH] hrtimers: cleanup locking
Improve kernel/hrtimers.c locking: use a per-CPU base with a lock to control
locking of all clocks belonging to a CPU.  This simplifies code that needs to
lock all clocks at once.  This makes life easier for high-res timers and
dyntick.

No functional changes.

[ optimization change from Andrew Morton <akpm@osdl.org> ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
c9cb2e3d7c [PATCH] hrtimers: namespace and enum cleanup
- hrtimers did not use the hrtimer_restart enum and relied on the implict
  int representation. Fix the prototypes and the functions using the enums.
- Use seperate name spaces for the enumerations
- Convert hrtimer_restart macro to inline function
- Add comments

No functional changes.

[akpm@osdl.org: fix input driver]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
fd064b9b77 [PATCH] Extend next_timer_interrupt() to use a reference jiffie
For CONFIG_NO_HZ we need to calculate the next timer wheel event based on a
given jiffie value.  Extend the existing code to allow the extra 'now'
argument.  Provide a compability function for the existing implementations to
call the function with now == jiffies.  (This also solves the racyness of the
original code vs.  jiffies changing during the iteration.)

No functional changes to existing users of this infrastructure.

[ remove WARN_ON() that triggered on s390, by Carsten Otte <cotte@de.ibm.com> ]
[ made new helper static, Adrian Bunk <bunk@stusta.de> ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
1cfd68496e [PATCH] Fix cascade lookup of next_timer_interrupt
When searching for the next pending timer in the timer wheel we need to take
the cascade into account.  The current code has several problems:

 1. it looks into the previous cascade
 2. it ignores a pending cascade
 3. it ignores multiple cascades

Change the cascade lookup, so it calculates the array index from the point of
the next cascade and always look at the cascade buckets, when the cascade is
pending, i.e.  gets executed in the next timer softirq.  When multiple
cascades are pending, then lookup the next buckets too.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Ingo Molnar
dde4b2b5f4 [PATCH] uninline irq_enter()
Uninline irq_enter().  [dynticks adds more stuff to it]

No functional changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
5d8b34fdcb [PATCH] clocksource: Add verification (watchdog) helper
The TSC needs to be verified against another clocksource.  Instead of using
hardwired assumptions of available hardware, provide a generic verification
mechanism.  The verification uses the best available clocksource and handles
the usability for high resolution timers / dynticks of the clocksource which
needs to be verified.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:57 -08:00
Thomas Gleixner
7e69f2b1ea [PATCH] clocksource: Remove the update callback
The clocksource code allows direct updates of the rating of a given
clocksource now.  Change TSC unstable tracking to use this interface and
remove the update callback.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:57 -08:00
Thomas Gleixner
73b08d2aa4 [PATCH] clocksource: replace is_continuous by a flag field
Using a flag filed allows to encode more than one information into a variable.
Preparatory patch for the generic clocksource verification.

[mingo@elte.hu: convert vmitime.c to the new clocksource flag]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:57 -08:00
Thomas Gleixner
92c7e00254 [PATCH] Simplify the registration of clocksources
Enqueue clocksources in rating order to make selection of the clocksource
easier.  Also check the match with an user override at enqueue time.

Preparatory patch for the generic clocksource verification.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:57 -08:00
John Stultz
411187fb05 [PATCH] GTOD: persistent clock support
Persistent clock support: do proper timekeeping across suspend/resume.

[bunk@stusta.de: cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:57 -08:00
Ingo Molnar
41cf54455d [PATCH] Fix multiple conversion bugs in msecs_to_jiffies
Fix multiple conversion bugs in msecs_to_jiffies().

The main problem is that this condition:

	if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))

overflows if HZ is smaller than 1000!

This change is user-visible: for HZ=250 SUS-compliant poll()-timeout
value of -20 is mistakenly converted to 'immediate timeout'.

(The new dyntick code also triggered this, that's how we noticed.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00
Ingo Molnar
8b9365d753 [PATCH] Uninline jiffies.h functions
There are loads of fat functions hidden in jiffies.h.  Uninline them.  No code
changes.

[jeremy@goop.org: export fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00
john stultz
f4304ab215 [PATCH] HZ free ntp
Distangle the NTP update from HZ.  This is necessary for dynamic tick enabled
kernels.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00
Thomas Gleixner
771ee3b04e [PATCH] Add a function to handle interrupt affinity setting
Provide funtions to:
 - check, whether an interrupt can set the affinity
 - pin the interrupt to a given cpu

Necessary for the ability to setup clocksources more flexible (e.g.  use the
different HPET channels per CPU)

[akpm@osdl.org: alpha build fix]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00
Thomas Gleixner
950f4427c2 [PATCH] Add irq flag to disable balancing for an interrupt
Add a flag so we can prevent the irq balancing of an interrupt.  Move the
bits, so we have room for more :)

Necessary for the ability to setup clocksources more flexible (e.g.  use the
different HPET channels per CPU)

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:56 -08:00
Linus Torvalds
414f827c46 Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (94 commits)
  [PATCH] x86-64: Remove mk_pte_phys()
  [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386
  [PATCH] i386: fix 32-bit ioctls on x64_32
  [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64
  [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header.
  [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c
  [PATCH] i386: Move mce_disabled to asm/mce.h
  [PATCH] i386: paravirt unhandled fallthrough
  [PATCH] x86_64: Wire up compat epoll_pwait
  [PATCH] x86: Don't require the vDSO for handling a.out signals
  [PATCH] i386: Fix Cyrix MediaGX detection
  [PATCH] i386: Fix warning in cpu initialization
  [PATCH] i386: Fix warning in microcode.c
  [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs
  [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo
  [PATCH] i386: Remove fastcall in paravirt.[ch]
  [PATCH] x86-64: Fix wrong gcc check in bitops.h
  [PATCH] x86-64: survive having no irq mapping for a vector
  [PATCH] i386: geode configuration fixes
  [PATCH] i386: add option to show more code in oops reports
  ...
2007-02-14 09:46:06 -08:00
Eric W. Biederman
d912b0cc1a [PATCH] sysctl: add a parent entry to ctl_table and set the parent entry
Add a parent entry into the ctl_table so you can walk the list of parents and
find the entire path to a ctl_table entry.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:10:00 -08:00
Eric W. Biederman
77b14db502 [PATCH] sysctl: reimplement the sysctl proc support
With this change the sysctl inodes can be cached and nothing needs to be done
when removing a sysctl table.

For a cost of 2K code we will save about 4K of static tables (when we remove
de from ctl_table) and 70K in proc_dir_entries that we will not allocate, or
about half that on a 32bit arch.

The speed feels about the same, even though we can now cache the sysctl
dentries :(

We get the core advantage that we don't need to have a 1 to 1 mapping between
ctl table entries and proc files.  Making it possible to have /proc/sys vary
depending on the namespace you are in.  The currently merged namespaces don't
have an issue here but the network namespace under /proc/sys/net needs to have
different directories depending on which network adapters are visible.  By
simply being a cache different directories being visible depending on who you
are is trivial to implement.

[akpm@osdl.org: fix uninitialised var]
[akpm@osdl.org: fix ARM build]
[bunk@stusta.de: make things static]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:10:00 -08:00
Eric W. Biederman
1ff007eb8e [PATCH] sysctl: allow sysctl_perm to be called from outside of sysctl.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:59 -08:00
Eric W. Biederman
805b5d5e06 [PATCH] sysctl: factor out sysctl_head_next from do_sysctl
The current logic to walk through the list of sysctl table headers is slightly
painful and implement in a way it cannot be used by code outside sysctl.c

I am in the process of implementing a version of the sysctl proc support that
instead of using the proc generic non-caching monster, just uses the existing
sysctl data structure as backing store for building the dcache entries and for
doing directory reads.  To use the existing data structures however I need a
way to get at them.

[akpm@osdl.org: warning fix]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:59 -08:00