In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.
This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 194730a9be ("net/smc: Make SMC statistics network namespace aware")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If smc_wr_alloc_lgr_mem() fails then return an error code. Don't return
success.
Fixes: 8799e310fb ("net/smc: add v2 support to the work request layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for
send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem
in clcsock.
The buffer size from TCP socket doesn't fit SMC well. Generally, buffers
are usually larger than TCP for SMC-R/-D to get higher performance, for
they are different underlay devices and paths.
So this patch unbinds buffer size from TCP, and introduces two sysctl
knobs to tune them independently. Also, these knobs are per net
namespace and work for containers.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).
But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.
So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.
[1] https://www.rfc-editor.org/rfc/rfc1122#page-101
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There might be a potential race between SMC-R buffer map and
link group termination.
smc_smcr_terminate_all() | smc_connect_rdma()
--------------------------------------------------------------
| smc_conn_create()
for links in smcibdev |
schedule links down |
| smc_buf_create()
| \- smcr_buf_map_usable_links()
| \- no usable links found,
| (rmb->mr = NULL)
|
| smc_clc_send_confirm()
| \- access conn->rmb_desc->mr[]->rkey
| (panic)
During reboot and IB device module remove, all links will be set
down and no usable links remain in link groups. In such situation
smcr_buf_map_usable_links() should return an error and stop the
CLC flow accessing to uninitialized mr.
Fixes: b9247544c1 ("net/smc: convert static link ID instances to support multiple links")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drivers/net/ethernet/freescale/fec.h
7d650df99d ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For passive connections, the refcount increment has been done in
smc_clcsock_accept()-->smc_sock_alloc().
Fixes: 3b2dec2603 ("net/smc: restructure client and server code in af_smc")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.
One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.
To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the smc and smc_diag modules were automatically loaded as
dependencies of the ism module whenever an ISM device was present.
With the pending rework of the ISM API, the smc module will no longer
automatically be loaded in presence of an ISM device. Usage of an AF_SMC
socket will still trigger loading of the smc modules, but usage of a
netlink socket will not.
This is addressed by setting the correct module aliases.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the DMBE bits, which are passed on individually in ism_move() as
parameter idx, available to the receiver.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reworked signature of the function to retrieve the system EID: No plausible
reason to use a double pointer. And neither to pass in the device as an
argument, as this identifier is by definition per system, not per device.
Plus some minor consistency edits.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This struct is used in a single place only, and its usage generates
inefficient code. Time to clean up!
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-and-tested-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_keepalive_(time|probes|intvl), they can be changed
concurrently. Thus, we need to add READ_ONCE() to their readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend SMC-R link group netlink attribute SMC_GEN_LGR_SMCR.
Introduce SMC_NLA_LGR_R_BUF_TYPE to show the buffer type of
SMC-R link group.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On long-running enterprise production servers, high-order contiguous
memory pages are usually very rare and in most cases we can only get
fragmented pages.
When replacing TCP with SMC-R in such production scenarios, attempting
to allocate high-order physically contiguous sndbufs and RMBs may result
in frequent memory compaction, which will cause unexpected hung issue
and further stability risks.
So this patch is aimed to allow SMC-R link group to use virtually
contiguous sndbufs and RMBs to avoid potential issues mentioned above.
Whether to use physically or virtually contiguous buffers can be set
by sysctl smcr_buf_type.
Note that using virtually contiguous buffers will bring an acceptable
performance regression, which can be mainly divided into two parts:
1) regression in data path, which is brought by additional address
translation of sndbuf by RNIC in Tx. But in general, translating
address through MTT is fast.
Taking 256KB sndbuf and RMB as an example, the comparisons in qperf
latency and bandwidth test with physically and virtually contiguous
buffers are as follows:
- client:
smc_run taskset -c <cpu> qperf <server> -oo msg_size:1:64K:*2\
-t 5 -vu tcp_{bw|lat}
- server:
smc_run taskset -c <cpu> qperf
[latency]
msgsize tcp smcr smcr-use-virt-buf
1 11.17 us 7.56 us 7.51 us (-0.67%)
2 10.65 us 7.74 us 7.56 us (-2.31%)
4 11.11 us 7.52 us 7.59 us ( 0.84%)
8 10.83 us 7.55 us 7.51 us (-0.48%)
16 11.21 us 7.46 us 7.51 us ( 0.71%)
32 10.65 us 7.53 us 7.58 us ( 0.61%)
64 10.95 us 7.74 us 7.80 us ( 0.76%)
128 11.14 us 7.83 us 7.87 us ( 0.47%)
256 10.97 us 7.94 us 7.92 us (-0.28%)
512 11.23 us 7.94 us 8.20 us ( 3.25%)
1024 11.60 us 8.12 us 8.20 us ( 0.96%)
2048 14.04 us 8.30 us 8.51 us ( 2.49%)
4096 16.88 us 9.13 us 9.07 us (-0.64%)
8192 22.50 us 10.56 us 11.22 us ( 6.26%)
16384 28.99 us 12.88 us 13.83 us ( 7.37%)
32768 40.13 us 16.76 us 16.95 us ( 1.16%)
65536 68.70 us 24.68 us 24.85 us ( 0.68%)
[bandwidth]
msgsize tcp smcr smcr-use-virt-buf
1 1.65 MB/s 1.59 MB/s 1.53 MB/s (-3.88%)
2 3.32 MB/s 3.17 MB/s 3.08 MB/s (-2.67%)
4 6.66 MB/s 6.33 MB/s 6.09 MB/s (-3.85%)
8 13.67 MB/s 13.45 MB/s 11.97 MB/s (-10.99%)
16 25.36 MB/s 27.15 MB/s 24.16 MB/s (-11.01%)
32 48.22 MB/s 54.24 MB/s 49.41 MB/s (-8.89%)
64 106.79 MB/s 107.32 MB/s 99.05 MB/s (-7.71%)
128 210.21 MB/s 202.46 MB/s 201.02 MB/s (-0.71%)
256 400.81 MB/s 416.81 MB/s 393.52 MB/s (-5.59%)
512 746.49 MB/s 834.12 MB/s 809.99 MB/s (-2.89%)
1024 1292.33 MB/s 1641.96 MB/s 1571.82 MB/s (-4.27%)
2048 2007.64 MB/s 2760.44 MB/s 2717.68 MB/s (-1.55%)
4096 2665.17 MB/s 4157.44 MB/s 4070.76 MB/s (-2.09%)
8192 3159.72 MB/s 4361.57 MB/s 4270.65 MB/s (-2.08%)
16384 4186.70 MB/s 4574.13 MB/s 4501.17 MB/s (-1.60%)
32768 4093.21 MB/s 4487.42 MB/s 4322.43 MB/s (-3.68%)
65536 4057.14 MB/s 4735.61 MB/s 4555.17 MB/s (-3.81%)
2) regression in buffer initialization and destruction path, which is
brought by additional MR operations of sndbufs. But thanks to link
group buffer reuse mechanism, the impact of this kind of regression
decreases as times of buffer reuse increases.
Taking 256KB sndbuf and RMB as an example, latency of some key SMC-R
buffer-related function obtained by bpftrace are as follows:
Function Phys-bufs Virt-bufs
smcr_new_buf_create() 67154 ns 79164 ns
smc_ib_buf_map_sg() 525 ns 928 ns
smc_ib_get_memory_region() 162294 ns 161191 ns
smc_wr_reg_send() 9957 ns 9635 ns
smc_ib_put_memory_region() 203548 ns 198374 ns
smc_ib_buf_unmap_sg() 508 ns 1158 ns
------------
Test environment notes:
1. Above tests run on 2 VMs within the same Host.
2. The NIC is ConnectX-4Lx, using SRIOV and passing through 2 VFs to
the each VM respectively.
3. VMs' vCPUs are binded to different physical CPUs, and the binded
physical CPUs are isolated by `isolcpus=xxx` cmdline.
4. NICs' queue number are set to 1.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a new SMC-R specific element buf_type
in struct smc_link_group, for recording the value of sysctl
smcr_buf_type when link group is created.
New created link group will create and reuse buffers of the
type specified by buf_type.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the sysctl smcr_buf_type for setting
the type of SMC-R sndbufs and RMBs.
Valid values includes:
- SMCR_PHYS_CONT_BUFS, which means use physically contiguous
buffers for better performance and is the default value.
- SMCR_VIRT_CONT_BUFS, which means use virtually contiguous
buffers in case of physically contiguous memory is scarce.
- SMCR_MIXED_BUFS, which means first try to use physically
contiguous buffers. If not available, then use virtually
contiguous buffers.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some CPU, such as Xeon, can guarantee DMA cache coherency.
So it is no need to use dma sync APIs to flush cache on such CPUs.
In order to avoid calling dma sync APIs on the IO path, use the
dma_need_sync to check whether smc_buf_desc needs dma sync when
creating smc_buf_desc.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_ib_sync_sg_for_cpu/device are the ops used for dma memory cache
consistency. Smc sndbufs are dma buffers, where CPU writes data to
it and PCIE device reads data from it. So for sndbufs,
smc_ib_sync_sg_for_device is needed and smc_ib_sync_sg_for_cpu is
redundant as PCIE device will not write the buffers. Smc rmbs
are dma buffers, where PCIE device write data to it and CPU read
data from it. So for rmbs, smc_ib_sync_sg_for_cpu is needed and
smc_ib_sync_sg_for_device is redundant as CPU will not write the buffers.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"struct smc_cdc_tx_pend **" can not directly convert
to "struct smc_wr_tx_pend_priv *".
Fixes: 2bced6aefa ("net/smc: put slot when connection is killed")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the process of checking whether RDMAv2 is available, the current
implementation first sets ini->smcrv2.ib_dev_v2, and then allocates
smc buf desc and register rmb, but the latter may fail. In this case,
the pointer should be reset.
Fixes: e49300a6bf ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220525085408.812273-1-liuyacan@corp.netease.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the process of checking whether RDMAv2 is available, the current
implementation first sets ini->smcrv2.ib_dev_v2, and then allocates
smc buf desc, but the latter may fail. Unfortunately, the caller
will only check the former. In this case, a NULL pointer reference
will occur in smc_clc_send_confirm_accept() when accessing
conn->rmb_desc.
This patch does two things:
1. Use the return code to determine whether V2 is available.
2. If the return code is NODEV, continue to check whether V1 is
available.
Fixes: e49300a6bf ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same trigger condition as commit 86434744. When setsockopt runs
in parallel to a connect(), and switch the socket into fallback
mode. Then the sk_refcnt is incremented in smc_connect(), but
its state stay in SMC_INIT (NOT SMC_ACTIVE). This cause the
corresponding sk_refcnt decrement in __smc_release() will not be
performed.
Fixes: 86434744fe ("net/smc: add fallback check to connect()")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rdma write with inline flag when sending small packages,
whose length is shorter than the qp's max_inline_data, can
help reducing latency.
In my test environment, which are 2 VMs running on the same
physical host and whose NICs(ConnectX-4Lx) are working on
SR-IOV mode, qperf shows 0.5us-0.7us improvement in latency.
Test command:
server: smc_run taskset -c 1 qperf
client: smc_run taskset -c 1 qperf <server ip> -oo \
msg_size:1:2K:*2 -t 30 -vu tcp_lat
The results shown below:
msgsize before after
1B 11.2 us 10.6 us (-0.6 us)
2B 11.2 us 10.7 us (-0.5 us)
4B 11.3 us 10.7 us (-0.6 us)
8B 11.2 us 10.6 us (-0.6 us)
16B 11.3 us 10.7 us (-0.6 us)
32B 11.3 us 10.6 us (-0.7 us)
64B 11.2 us 11.2 us (0 us)
128B 11.2 us 11.2 us (0 us)
256B 11.2 us 11.2 us (0 us)
512B 11.4 us 11.3 us (-0.1 us)
1KB 11.4 us 11.5 us (0.1 us)
2KB 11.5 us 11.5 us (0 us)
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Tested-by: kernel test robot <lkp@intel.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As cdc msg's length is 44B, cdc msgs can be sent inline in
most rdma devices, which can help reducing sending latency.
In my test environment, which are 2 VMs running on the same
physical host and whose NICs(ConnectX-4Lx) are working on
SR-IOV mode, qperf shows 0.4us-0.7us improvement in latency.
Test command:
server: smc_run taskset -c 1 qperf
client: smc_run taskset -c 1 qperf <server ip> -oo \
msg_size:1:2K:*2 -t 30 -vu tcp_lat
The results shown below:
msgsize before after
1B 11.9 us 11.2 us (-0.7 us)
2B 11.7 us 11.2 us (-0.5 us)
4B 11.7 us 11.3 us (-0.4 us)
8B 11.6 us 11.2 us (-0.4 us)
16B 11.7 us 11.3 us (-0.4 us)
32B 11.7 us 11.3 us (-0.4 us)
64B 11.7 us 11.2 us (-0.5 us)
128B 11.6 us 11.2 us (-0.4 us)
256B 11.8 us 11.2 us (-0.6 us)
512B 11.8 us 11.4 us (-0.4 us)
1KB 11.9 us 11.4 us (-0.5 us)
2KB 12.1 us 11.5 us (-0.6 us)
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Tested-by: kernel test robot <lkp@intel.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Connect with O_NONBLOCK will not be completed immediately
and returns -EINPROGRESS. It is possible to use selector/poll
for completion by selecting the socket for writing. After select
indicates writability, a second connect function call will return
0 to indicate connected successfully as TCP does, but smc returns
-EISCONN. Use socket state for smc to indicate connect state, which
can help smc aligning the connect behaviour with TCP.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Non blocking sendmsg will return -EAGAIN when any signal pending
and no send space left, while non blocking recvmsg return -EINTR
when signal pending and no data received. This may makes confused.
As TCP returns -EAGAIN in the conditions described above. Align the
behavior of smc with TCP.
Fixes: 846e344eb7 ("net/smc: add receive timeout check")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a slab-out-of-bounds/use-after-free issue,
which was caused by accessing an already freed smc sock in
fallback-specific callback functions of clcsock.
This patch fixes the issue by restoring fallback-specific
callback functions to original ones and resetting clcsock
sk_user_data to NULL before freeing smc sock.
Meanwhile, this patch introduces sk_callback_lock to make
the access and assignment to sk_user_data mutually exclusive.
Reported-by: syzbot+b425899ed22c6943e00b@syzkaller.appspotmail.com
Fixes: 341adeec9a ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Link: https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both listen and fallback process will save the current clcsock
callback functions and establish new ones. But if both of them
happen, the saved callback functions will be overwritten.
So this patch introduces some helpers to ensure that only save
the original callback functions of clcsock.
Fixes: 341adeec9a ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current implementation, when TCP initiates a connection
to an unavailable [ip,port], ECONNREFUSED will be stored in the
TCP socket, but SMC will not. However, some apps (like curl) use
getsockopt(,,SO_ERROR,,) to get the error information, which makes
them miss the error message and behave strangely.
Fixes: 50717a37db ("net/smc: nonblocking connect rework")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit e5d5aadcf3 ("net/smc: fix sk_refcnt underflow on linkdown
and fallback"), for a fallback connection, __smc_release() does not call
sock_put() if its state is already SMC_CLOSED.
When calling smc_shutdown() after falling back, its state is set to
SMC_CLOSED but does not call sock_put(), so this patch calls it.
Reported-and-tested-by: syzbot+6e29a053eb165bd50de5@syzkaller.appspotmail.com
Fixes: e5d5aadcf3 ("net/smc: fix sk_refcnt underflow on linkdown and fallback")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Child sockets may inherit the af_ops from the parent listen socket.
When the listen socket is released then the af_ops of the child socket
points to released memory.
Solve that by restoring the original af_ops for child sockets which
inherited the parent af_ops. And clear any inherited user_data of the
parent socket.
Fixes: 8270d9c210 ("net/smc: Limit backlog connections")
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_name() was called with dev.parent as argument but without to
NULL-check it before.
Solve this by checking the pointer before the call to dev_name().
Fixes: af5f60c7e3 ("net/smc: allow PCI IDs as ib device names in the pnet table")
Reported-by: syzbot+03e3e228510223dabd34@syzkaller.appspotmail.com
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using snprintf() to convert not null-terminated strings to null
terminated strings may cause out of bounds read in the source string.
Therefore use memcpy() and terminate the target string with a null
afterwards.
Fixes: fa08666255 ("net/smc: add support for user defined EIDs")
Fixes: 3c572145c2 ("net/smc: add generic netlink support for system EID")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current autocork algorithms will delay the data transmission
in BH context to smc_release_cb() when sock_lock is hold by user.
So there is a possibility that when connection is being actively
closed (sock_lock is hold by user now), some corked data still
remains in sndbuf, waiting to be sent by smc_release_cb(). This
will cause:
- smc_close_stream_wait(), which is called under the sock_lock,
has a high probability of timeout because data transmission is
delayed until sock_lock is released.
- Unexpected data sends may happen after connction closed and use
the rtoken which has been deleted by remote peer through
LLC_DELETE_RKEY messages.
So this patch will try to send out the remaining corked data in
sndbuf before active close process, to ensure data integrity and
avoid unexpected data transmission after close.
Reported-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Fixes: 6b88af839d ("net/smc: don't send in the BH context if sock_owned_by_user")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1648447836-111521-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently added smc_sysctl_net_exit() forgot to free
the memory allocated from smc_sysctl_net_init()
for non initial network namespace.
Fixes: 462791bbfa ("net/smc: add sysctl interface for SMC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Tony Lu <tonylu@linux.alibaba.com>
Cc: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
when CONFIG_SYSCTL not set, smc_sysctl_net_init/exit
need to be static inline to avoid missing-prototypes
if compile with W=1.
Since __net_exit has noinline annotation when CONFIG_NET_NS
not set, it should not be used with static inline.
So remove the __net_init/exit when CONFIG_SYSCTL not set.
Fixes: 7de8eb0d90 ("net/smc: fix compile warning for smc_sysctl")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220309033051.41893-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel test robot reports multiple warning for smc_sysctl:
In file included from net/smc/smc_sysctl.c:17:
>> net/smc/smc_sysctl.h:23:5: warning: no previous prototype \
for function 'smc_sysctl_init' [-Wmissing-prototypes]
int smc_sysctl_init(void)
^
and
>> WARNING: modpost: vmlinux.o(.text+0x12ced2d): Section mismatch \
in reference from the function smc_sysctl_exit() to the variable
.init.data:smc_sysctl_ops
The function smc_sysctl_exit() references
the variable __initdata smc_sysctl_ops.
This is often because smc_sysctl_exit lacks a __initdata
annotation or the annotation of smc_sysctl_ops is wrong.
and
net/smc/smc_sysctl.c: In function 'smc_sysctl_init_net':
net/smc/smc_sysctl.c:47:17: error: 'struct netns_smc' has no member named 'smc_hdr'
47 | net->smc.smc_hdr = register_net_sysctl(net, "net/smc", table);
Since we don't need global sysctl initialization. To make things
clean and simple, remove the global pernet_operations and
smc_sysctl_{init|exit}. Call smc_sysctl_net_{init|exit} directly
from smc_net_{init|exit}.
Also initialized sysctl_autocorking_size if CONFIG_SYSCTL it not
set, this make sure SMC autocorking is enabled by default if
CONFIG_SYSCTL is not set.
Fixes: 462791bbfa ("net/smc: add sysctl interface for SMC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit a505cce6f7.
Leon says:
We already discussed that. SMC should be changed to use
RDMA CQ pool API
drivers/infiniband/core/cq.c.
ib_poll_handler() has much better implementation (tracing,
IRQ rescheduling, proper error handling) than this SMC variant.
Since we will switch to ib_poll_handler() in the future,
revert this patch.
Link: https://lore.kernel.org/netdev/20220301105332.GA9417@linux.alibaba.com/
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear.
Based on the fact that whether a new SMC connection can be accepted or
not depends on not only the limit of conn nums, but also the available
entries of rtoken. Since the rtoken release is trigger by peer, while
the conn nums is decrease by local, tons of thing can happen in this
time difference.
This only thing that needs to be mentioned is that now all connection
creations are completely protected by smc_server_lgr_pending lock, it's
enough to check only the available entries in rtokens_used_mask.
Fixes: cd6851f303 ("smc: remote memory buffers (RMBs)")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client
dues to following execution sequence:
Server Conn A: Server Conn B: Client Conn B:
smc_lgr_unregister_conn
smc_lgr_register_conn
smc_clc_send_accept ->
smc_rtoken_add
smcr_buf_unuse
-> Client Conn A:
smc_rtoken_delete
smc_lgr_unregister_conn() makes current link available to assigned to new
incoming connection, while smcr_buf_unuse() has not executed yet, which
means that smc_rtoken_add may fail because of insufficient rtoken_entry,
reversing their execution order will avoid this problem.
Fixes: 3e034725c0 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
